I love my 2 tap edgestar kegerator. Best fathers day gift ever thanks to my son and my wife!!!
@sdallnct Жыл бұрын
Found ur video as I have that exact unit “on the way”. Appreciate the the step by step, explanation. I’m ever excited!
@samclark1024 жыл бұрын
This video could not have been more perfectly timed. I had ordered the 4 tap version of this kegerator and watched this video (twice) and was able to tear into that thing today and set it up in about 30 minutes. This was so well done that once finished I realized there were no instructions included in my unit. No need. One difference was the tower kit I had to assemble did not have the mounting flange and escutcheon allowing for the screws to be tightened with ease from the outside. I had to reach down inside the tower and blindly thread and screw the fasteners down. Talk about using The Force.....
@EdStansel3 ай бұрын
Thanks, great video. Wish I had watched this before unboxing!
@GO0DWOLF2 жыл бұрын
I've seen sanke connectors with ball posts on them so you can use any keg without having to swap connectors on your lines. Just pop the ball connectors on and get 'er done.
@ajoyce3 жыл бұрын
Thanks! You just helped me build mine.
@sorrygunsathome2 жыл бұрын
Fittings are also called pushlock just get the liquid rated ones and you can also get them stainless. you can use good Teflon paint lines(there're food safe) and basicly get any size
@demcastles74934 жыл бұрын
This video came out at the perfect time! Woooooh! 🍻
@GenusBrewing4 жыл бұрын
Perfect!
@imlon23 жыл бұрын
Is there a kit to install this into a bar top where the tower is not attached to the kegerator?
@GentleGiantFan2 жыл бұрын
I aquired one of these used. Seems to be running good. Does the fan cut off and on with the compressor or is it always on, always off via the switch?
@jeffclause022 жыл бұрын
Do you need to sanitize the liquid lines?
@michaelfournier39483 жыл бұрын
Does this fridge have a internal light that comes on when door is opened?
@jazzyjeff3503 жыл бұрын
Hey guys, love the video. I'm in the process of setting mine up right now. What length liquid lines would recommend? 5 ft per keg?
@GenusBrewing3 жыл бұрын
If it's poly line like in this video a little over 5ft is appropriate- 6 ft should be perfect. If it's vinyl 4 ft
@eternaldrive4 жыл бұрын
I rebuilt my kegerator lines recently (an older version) the first time I did barbs and this time I did duotight fittings. The first time with barbs involved alot swearing and sore hands. The duotight rebuild went smoothly. Assuming they hold up I don't think I would do barbs again.
@BPal754 жыл бұрын
Thanks for the video! One question I have is after you feed the gas line through the port in the back of the kegerator, is there any type of gasket or something to help seal that hole? The port looked much bigger than the gas line so I would think there would be quite a bit of cold air lost through there?
@smontyjr3 жыл бұрын
Where do you recommend installing a secondary regulator inside the Komos v2?
@GenusBrewing3 жыл бұрын
Ours we put on the inside left wall
@jordancourt58034 жыл бұрын
What is the diffrence between the kegland kegerator X and the Komos kegerator?
@theinterneter4 жыл бұрын
I have the keg king brand and it's basically exactly the same, it just came with clamps instead of duotight fittings
@GentleGiantFan2 жыл бұрын
According to Kegland, Komos is just More Beer's name brand for their kegerators. Besides that, they're identical.
@blackhouse76463 жыл бұрын
Do you still recommend this kegerator?
@MrMalevolent863 жыл бұрын
I see the UI and Gonzaga flags, are you local to the Palouse?
@JFDT4 жыл бұрын
Have you tried using boiling water instead of a heat gun on polyethylene lines?
@ajkarn81153 жыл бұрын
Can someone provide the sizes and types of fittings to purchase outside of what comes with it? Thanks, AJ
@williamfletcher85964 жыл бұрын
This channel popped up in my feed, I resisted watching for a while because I thought it said genius brewing. After watching a couple videos and realizing there was no genius involved I'm now really enjoying the channel. Keep up the good work.
@GenusBrewing4 жыл бұрын
We meant to be genius brewing but we spelled it wrong :'(
@Holdmuhbeer4 жыл бұрын
@@GenusBrewing all the more fitting, it would seem.
@DianeBa532 жыл бұрын
Helpful
@shannonwalker21963 жыл бұрын
How do Ireverse the door?
@john-morgansmithline80142 жыл бұрын
You guys around eastern WA?
@GenusBrewing2 жыл бұрын
Yes - Spokane!
@kcweazle4 жыл бұрын
I have a kegerator, I just want that tower cooler. Wish I could just get that.
@jfdoherty34484 жыл бұрын
Garry Spencer you can buy aftermarket tower coolers. Got one off amazon and it works awesome!
@GenusBrewing4 жыл бұрын
First!
@craigkinney8534 жыл бұрын
Well made video Pedro.
@GenusBrewing4 жыл бұрын
Thanks!
@wyattalexander40414 жыл бұрын
Wow this was super helpful thanks🍻
@GenusBrewing4 жыл бұрын
Glad it helped!
@Holdmuhbeer4 жыл бұрын
This is literally the exact same unit as the keg king, except I got the 3 tap version.
@DointheMost4 жыл бұрын
We haven’t been able to find a freezer for a keezer build since COVID panic hit 😓
@dennisschickling57594 жыл бұрын
Home Depot has a lot of them. In Bensalem Pennsylvania. I would think more Home Depot has them also. Good luck. #STAYSAFE
@lonewolf93904 жыл бұрын
All I want is a mini fridge big enough to use as a fermentation chamber/kegerator. None to be found within a 250 mile radius of my ZIP code! It's crazy.
@dennisschickling57594 жыл бұрын
@@lonewolf9390 😢
@cmcurran54 жыл бұрын
i only built one because of covid lol
@RichardCockerill4 жыл бұрын
i have no money..but i do like peanut butter....a lot
@Texaviator4 жыл бұрын
Do you guys sell these?
@GenusBrewing4 жыл бұрын
Yes we do!
@Texaviator4 жыл бұрын
Genus Brewing awesome what’s the details for a dual tap?
@HOMEBREW4LIFE4 жыл бұрын
LAST!
@GenusBrewing4 жыл бұрын
Noooo!
@dennisschickling57594 жыл бұрын
Nice information. Thanks #STAYSAFE
@Nick-ys2lz4 жыл бұрын
Go cougs
@jdquinty91292 жыл бұрын
Step one - throw away half the parts
@craigkinney8534 жыл бұрын
Second
@mattl97044 жыл бұрын
I so hate to offer a critical comment because I love what you guys do. But... buy a $30 boom pole for your mic. Will allow you to use both hands during assembly, enhance the video's overall appearance, and wait for it... increase social distancing. Again, sorry.
@ForgetU4 жыл бұрын
Look these guys can't even spell, wait for it... "genius". They are beer guys.