These videos are genuinely entertaining with the added bonus that they feel like a review/explanation rather than a sales pitch, great balance! but get more stock haha
@KegLand2 жыл бұрын
Thanks for that. We certainly have a lot of fun making these videos. Hope you enjoy using the products!
@NoMusiciansInMusicAnymore2 жыл бұрын
@@KegLand I can say I have been so far, almost more than the product... Almost.
@Kampela9910 ай бұрын
, this videos first seconds still brightening murky days, 😘
@Mr7Pod6 ай бұрын
I read in the description that the 4 inch hole does not allow pressures above 21 psi without leaks. this means carbonated beers maximum at 2.2 volumes at 18 degrees. this is a big limitation. Sin.
@Julianmirin6 ай бұрын
Very bad. It would have been a great product without this limitation. It's unusable for normaly carbonated beer at 2.5 volumes.
@lmomontezzo2 жыл бұрын
We need an easy-intelligent way to know how much beer is left in the keg!!! You guys are the best on developing these cool, smart, cost-efficient gadgets we homebrewers from all over the world love. Please use your great ideas to come up with something that will let me monitor my keg level, so my beer will never end up on me unexpectedly again. Great bong btw!
@KegLand2 жыл бұрын
Thanks for that. We have a few products that we have to finish first but I would agree we should start working on a keg level checker soon. We would like to first make our kegerators wifi connected and then if we can do this we can use a simple bluetooth bridge to the keg which would save a lot of energy. So in my opinion this is the beast way to go.
@lmomontezzo2 жыл бұрын
@@KegLand Hey guys! First off all, thanks for the reply, really appreciate that! I agree that a connected keg level checker would be the best scenario, however I do believe that a simpler/cheaper solution would also have space in the market and could even be more democratic, helping those without a connected kegerator. Maybe something with floating magnets could already give a visual indication of a keg level, without the connected feature, but in a simpler way. Don't take me wrong, I do love the connected stuffs, I'm a happy rapt pill owner and do own my portion of the home automation gadgets.... still, keg level could go ether simple-offline or connect way, both helping lots of homebrewers.
@TheChinaClipper Жыл бұрын
This is really really well thought, keep up with the good work!
@HomeBrewNetwork2 жыл бұрын
Lots of variation there! Awesome! Cheers!
@KegLand2 жыл бұрын
Thanks for that Gash. We appreciate it. We will have to get some of these over to you to try out.
@White_Rose_Al2 жыл бұрын
That looks like a clever bit of kit, great idea
@KegLand2 жыл бұрын
Yes it's quite simple but often the best inventions are.
@PartyTimeBrewing2 жыл бұрын
Love seeing the new stuff you guys have to offer! Can't wait for the Kegland Centrifuge! Cheers!
@KegLand2 жыл бұрын
Yes I agree. A centrifuge would be amazing.
@fdk70142 жыл бұрын
Simple but clever device. I like it!
@KegLand2 жыл бұрын
Yes it's a really simple device.
@smalldawg45702 жыл бұрын
Really good stuff coming from your company KegLand cant wait to get back into brewing again and to try out some of these new devices
@KegLand2 жыл бұрын
Yes we have been working on quite a lot of new stuff lately so it's an exciting time to get back into the hobby and give all the new gear a crack
@UnitBeerMonsta2 жыл бұрын
Man this video wouldve been hard to make without laughing esp the video of the "carbonation" cmonnnnn 🤣🤣🤣 love it absolutely love it
@KegLand2 жыл бұрын
Thanks for that. We are glad you have an appreciation for our humor. thanks!
@irish1759able2 жыл бұрын
Love the pics on the website of these 🤣, only came across them yesterday
@KegLand2 жыл бұрын
Thanks for that. Hope you enjoy using them.
@joe.skiles2 жыл бұрын
Another great innovation! Nice work!
@KegLand2 жыл бұрын
Thanks Joe. We appreciate it.
@codebowl2 жыл бұрын
Awesome multipurpose tool I will have to get one once I get a fermenter it would attach to :D
@KegLand2 жыл бұрын
Get the FermZilla!
@PortlyGentleman2 жыл бұрын
Holy cow! That thing is awesome! You guys know I'm in the midst of constructing a brand new home brewery at the new house right? Some of those components also look like they could double as a water pipe if one was so inclined 🤷
@KegLand2 жыл бұрын
That's great. Let us know if we can sort you out with some stuff for your home brewery.
@user-yy4tm1fk8u Жыл бұрын
KegLand Rocks!
@KegLand Жыл бұрын
Thanks. We appreciate the support!
@BitterRealityBrewing2 жыл бұрын
A little complex (in reference to the number of parts as it looks simple enough for anyone to use) but I really like it and the versatility of the device. Great Job! Keep inventing!
@KegLand2 жыл бұрын
Thanks for that. We really appreciate it.
@59apachestepside Жыл бұрын
Right on spot. All you need now is a version that uses a 2” TC ferrule instead of the Fermzilla lid connection and you have an instant sankey keg fermenter kit. I made one from stainless TC parts and have been fermenting with a floating dip tube and purged dry hopping with a sight glass in 1/2 bbl sankeys for several years now and it works fantastic.
@KegLand Жыл бұрын
That is a fair point. We will see if we can come up with a solution for you.
@shanej2429 Жыл бұрын
It would be awesome to see a filter cartridge compatible with the hop bong for inline filtration.
@chris415-a11 ай бұрын
loved the intro :)
@suwirwong Жыл бұрын
OMG you are genius mate☝🤟🤟🤟
@KegLand Жыл бұрын
thanks!
@reggiek76 Жыл бұрын
I didn't read through all the comments, but it would've been nice to hear a shout out of where The Randall came from. Just saying
@KegLand Жыл бұрын
Thanks Reggie. Yes this is something we need to thank Sam Calagione for!
@fincito2 жыл бұрын
If you remove the bong after dry hopping, will the butterfly valve hold pressure or at least keep oxygen out? I don't have the height in my chamber for the entire unit.
@shanej24292 жыл бұрын
Lol love the intro.
@adamrundell1032 жыл бұрын
I just had a look on the KegLand website and can't find an answer, so thought I'd ask here: What pressure rating is the 2" butterfly value rated to? Could I leave the butterfly value closed on my all-rounder (with a pressure gauge for pressure fermenting) and just attach the hop bong when I dry hop?
@zorangavrilovic87 Жыл бұрын
I came here with the same question :) But, I guess you could use the tri-clover bottle cap, and swap at the dry hopping stage to the bong, with the butterfly valve, closed. Maybe I'm wrong, but that seems like a good approach.
@joaoduarte93652 жыл бұрын
Always ahead of the rest of the market. Awesome work Kegland! Hope to test this as well as the whole tri clover series! Can't wait for it to be available in europe! Any projections btw regarding when will it reach european retailers?
@KegLand2 жыл бұрын
I think the new BrewZilla Tri-conicals will start to surface in Europe by end of July. Things like this hop bong will be available shortly after. Just keep hasting your local retailer so they order the items a bit quicker. Often the retailers if they order too slowly they miss out and the product sells out.
@alpha729632 жыл бұрын
Looks like a God idea to make a filter inset for that bong 😏
@KegLand2 жыл бұрын
Yes I think these filters will be quite useful for many other applications.
@TedeTVs2 жыл бұрын
When is it landing in Europe? I'm stoked
@KegLand2 жыл бұрын
I am not sure but if you contact your local KegLand distributor and ask them they should be able to give you an arrival date.
@darrentd47172 жыл бұрын
Kegland stuff is awsome... Just such a shame you can't get half of it in England. Shipping from China is OK but they don't stock everything.... Its a real pain.
@KegLand2 жыл бұрын
Hey Darren. Quite a lot of the time is just customers like yourself just request it from your local KegLand distributor and then they will often order the stock from us shortly after. Which home brew distributor in UK do you purchase from?
@FLOYDMSMC2 жыл бұрын
Well hops are apart of the Cannabaceae family
@KegLand2 жыл бұрын
Yes, if only they had the same attributes I am sure we would sell a lot more hops.
@GenusBrewing2 жыл бұрын
That whole systems could be autoclaved? That's crazy.
@KegLand2 жыл бұрын
So many great engineering plastics to choose from these days and many of them can be autoclaved!
@pedroreis9352 Жыл бұрын
Any tip to add the thermowell to the hop bong? I'm having some problems to fit it properly, and it is leaking
@stewartmoore15512 жыл бұрын
Looks excellent. Would you not go gas out to spunding to hop bong and then a gas out line to starsan? Would purge by its self then you'd remove gas out before releasing the charge.
@KegLand Жыл бұрын
Yes absolutely this is a good way to do it and you would save some gas that way.
@l.r.scervecerocasero Жыл бұрын
Hola, esta tapa vale para el Fermzilla de 27litros
@KegLand Жыл бұрын
Yes absolutely.
@OlleMattsson Жыл бұрын
Holy crap your products are awesome! Does the lid have holes for the temp twister + probe? And if not, is there a way to use the hob bong setup and temp twister + probe simultaneously?
@KegLand11 ай бұрын
Thanks for that. We really appreciate the support. Yes you can use the hop bong with the temp twister. We are going to put some kits together so these are available on our website soon.
@DAAVILE-INVESTING8 ай бұрын
lol almost buy it thinking was for devils grass hahaha
@craiggranquist1848 Жыл бұрын
Good info in this video. Do you have any links to more in depth videos for inline carbonation? ie, best pressures and so on. Is this more efficient than carbonating in keg? Thanks Craig
@KegLand Жыл бұрын
If you are really interested in inline carbonating I would really recommend that you get the carbonation rector keg lid. This is really built for the application and although you could use this for the application the carbonation reactor lid is better.
@craiggranquist1848 Жыл бұрын
@@KegLand thanks
@craiggranquist1848 Жыл бұрын
@@KegLand I just checked the product. I don't think that it will fit my older 22 litre kegs. This looks like a newer lid.
@ScoochieR2 жыл бұрын
you crack me up
@KegLand2 жыл бұрын
We aim to please.
@jakepaleczny Жыл бұрын
Fun! I'm curious if the pump on the brewzilla gen 4 35l is sufficient to push wort through the hop Randall setup (say full of t90) on the way to the fermenter? (Assuming use of a slightly finer screen as noted in another comment)
@KegLand Жыл бұрын
I have not got a lot of experience at this to be honest but if you do test this out please let us know how you go so we can advise others too.
@kinggorf Жыл бұрын
How many seconds and at what PSI would you recommend for the purge in the 2" assembly with full capacity. I'm thinking continuous purge at 8 PSI for 45 seconds. What you think? Thats typically what I do on my nukatap filler when purging bottles
@KegLand Жыл бұрын
Continuous purge is good but difficult to know how much gas is going through. By pressurising up to say 3 bar then releasing this to atmosphere 3 times you can be more quantitative and have high degree of confidence the O2 will be below 1% for instance.
@marcusgilbert27052 жыл бұрын
Great stuff! When will you release a cornelius lid with an 1,5 triclamp? =)
@KegLand2 жыл бұрын
The Cornelius lids are generally for kegs. Kegs are not really designed for fermentation but for storage of finished beer. As a result we do not have plans to make this any time soon.
@lesykmahula8740 Жыл бұрын
I agree. @KegLand That or some similar solution would be awesome. Lots of homebrewers are fermenting in cornelius kegs. You made the lids with a floating dip tube post, so the hop bong next will make sense
@ReversedCircle2 жыл бұрын
Great idea to avoid oxygenation. What is a total height I need to have in my fridge to fit this complete setup (with fermzilla 55) including some free space for operations?
@KegLand2 жыл бұрын
It's best to look at the website and we have the dimesnions in different configurations stated.
@eduardoc19852 күн бұрын
LOL 0:01
@Lykketraefbryggeri Жыл бұрын
Hi guys, this product look awesome, do you have a similar solution for the kegmenter series? I am beginning to change from plastic fermenters to stainless steel.
@KegLand Жыл бұрын
Hey Kelwin. We have the BrewBuilt pressure pack lid and you can adapt the 1.5inch hop bong to this one: www.kegland.com.au/brewbuilt-pressure-pack-with-floating-dip-tube.html
@jmgacousticmusic Жыл бұрын
@kegland, could you please look into creating a kegmenter compatible lid out of engineered plastic like the new fermzilla range that has a TC lid so hop bong could be used among other things?
@KegLand Жыл бұрын
Yes definitely. We are giong to do this and this will be released at the same time as the new BrewBuilt fermenters which also use the 4" opening.
@jmgacousticmusic Жыл бұрын
@@KegLand legends, thanks heaps guys
@a.s.projects1082 Жыл бұрын
Out of stock in Brew keg Tap in UK 😤
@KegLand Жыл бұрын
No way! The stock only just arrived. Looks like these are going to be popular in UK.
@wollewolfram2 жыл бұрын
Could it also be used as a hop missile for a hopstand?
@joaoduarte93652 жыл бұрын
Have the same question! In my opinion, looking at the product, yes, and that would be a game changer specifically for NEIPAs !
@KegLand2 жыл бұрын
Yes definitely it could do this too. It can handle boiling hot wort so you can use as a hop missile or for hopstand. I should have really shown this too
@adamrundell1032 жыл бұрын
Will you sell the whole 2 inch assembly (with fermentor lid) as a kit? Tried to buy one of these when you put the last video out, but some of the parts weren't available so I didn't bother.
@KegLand2 жыл бұрын
Yes we will start putting together kits soon and put them on the website so they are easier to purchase as a set.
@Lykketraefbryggeri11 ай бұрын
Can I put a termowell in the fermzilla tri-clover lidt?
@KegLand4 ай бұрын
Yup. Its a bit awkward though - a Pil is a much better option
@ryanc30012 жыл бұрын
could this device replace the carbonation keg lid? i am thinking you could get prechilled water and tee off for inline sparking water as well?
@KegLand2 жыл бұрын
I think to get high level of carbonation I think the carbonation keg lid is still the best option as you can get to much higher saturation levels more easily with this device that is purpose built.
@stevenmcmaster2 жыл бұрын
waiting for the hop bong extension. 200gm...pfft. bring on the 2" to 6" mod. 1kg HOPS = what every NEIPA needs.
@ChewyBravo8882 жыл бұрын
They could be stacked. Just connect 5 in a row.
@KegLand2 жыл бұрын
Yes I thought customers would ask for this. We might have to bring some larger ones in too.
@marekkajda2 жыл бұрын
I believe you can just refill a couple of times :)
@louiej772 жыл бұрын
Interesting other uses for it! Would the mesh seal be small enough to stop T90 particulate getting through?
@KegLand2 жыл бұрын
This type of mesh seal is quite course. I would go with something a bit finer to stop T90
@mikemorgan8168 Жыл бұрын
Where can I find these seals?
@TheChemicalOli2 жыл бұрын
Does the 4”inch lid fit to the Kegmenter also? Would be a great update.
@KegLand2 жыл бұрын
We have a different lid for the Kegmenter that we are making soon. So stay tuned and you should see this on the website in a couple months.
@TheChemicalOli2 жыл бұрын
@@KegLand I will! But meanwhile i have already ordered the Brewbuilt-Lid, to workaround. Since this has no PRV I am very interested in ur upcoming solution.
@alexrocks1352 жыл бұрын
When is coming to the state?
@KegLand2 жыл бұрын
It's best to ask our American distributors. KegLand has two main distributors in America. www.morebeer.com and www.williamsbrwing.com It's best to contact these guys directly and they can give you lead times and approximate arrival dates.
@stewartmanders22912 жыл бұрын
What extra height does it add to an allrounder?
@KegLand2 жыл бұрын
It adds about 30cm to the height.
@ryanc30012 жыл бұрын
how long before KL release a RAPT butterfly valve LOL... Imagine setting this up so the fermentation CO2 off gas is going straight into your preloaded hop bong (with spunding valve atop). Once the pill hits a certain gravity, the valve automatically opens.... the entire process would be automated if you had RAPT temp control as well haha then what? automated kegging? haha
@KegLand Жыл бұрын
we are working on a RAPT connected gas control device so this is something that will achieve this task in the future.
@deepaksk16102 жыл бұрын
Any attachments for kegmenter?
@juravi67912 жыл бұрын
I second that.
@juravi67912 жыл бұрын
Or i think we can just use some 4" to 2" stainless adapter and then attach that bong. This needs some modification and welding work though. But then again, we don't need that Keglands hop bong at all.. ;)
@KegLand2 жыл бұрын
We do have some new Brewbuilt lids that you can use on the kegmenter too. So this is the best option.
@leehonhoreShutUpAL2 жыл бұрын
If I'm pulled over by the Cops and they see one of these on the seat beside me will I be charged with having drug paraphernalia? And more to the point can I sue Kegland? 😂
@ScoochieR2 жыл бұрын
It's only a hop bong, not a hop crack pipe. The cops would only laugh at you if you started stressing out.
@KegLand2 жыл бұрын
@@ScoochieR Haha. If the cops have an issue just get them to watch the full video!
@UnitBeerMonsta2 жыл бұрын
And if you put triclamp on the bottom, add a cone piece n hose and ya can smoke out of it too 🤣
@KegLand2 жыл бұрын
Yes probably not that we are encouraging smoking ;)
@UnitBeerMonsta2 жыл бұрын
@@KegLand oh no definitely not 😉😅
@silveraven12 жыл бұрын
Bahahaha
@KegLand2 жыл бұрын
Glad you see the humour in this one.
@huggybare92 жыл бұрын
This is not funny. Drugs kill a lot of people and you're just encouraging that. Very upset
@KegLand2 жыл бұрын
Sorry Carl. We thought it would be funny but perhaps some of our customers might see this the wrong way. KegLand does not encourage the use of drugs (except alcohol and maybe caffeine ). I hope that sets the record straight.