Keith Fenner wins the Chuck Challenge against Adam Booth twice

  Рет қаралды 32,179

1970chevelle396

1970chevelle396

Күн бұрын

Пікірлер: 52
@TheWwong
@TheWwong 8 жыл бұрын
No losers here. They are both excellent machinist.
@antoniopedroza411
@antoniopedroza411 4 жыл бұрын
yeah... but adam loose
@garymucher9590
@garymucher9590 7 жыл бұрын
I like this. But honestly they both are super amazing and I wouldn't mind working with, or even being able to just watch them while they work on anything. Truly two professionals that have taught me tons from the videos. Bravo to both! There were no losers in my opinion.
@1994delicaman
@1994delicaman 8 жыл бұрын
some guy is rockin the Ave shirt
@danielk8926
@danielk8926 8 жыл бұрын
I was wondering if that was AVE himself.
@mortenhartvigkristiansen7760
@mortenhartvigkristiansen7760 8 жыл бұрын
Think he's a bigger guy though..
@meyawabdulaziz3863
@meyawabdulaziz3863 8 жыл бұрын
thats a pretty small chuck for Adam
@svenp6504
@svenp6504 8 жыл бұрын
Tiny. It's got to feel weird.
@Doug_Edwards
@Doug_Edwards 8 жыл бұрын
Thanks Ken, looked like a fun day.
@johnw.peterson4311
@johnw.peterson4311 7 жыл бұрын
Both great machinist.
@DougHanchard
@DougHanchard 8 жыл бұрын
Just remember, just before this, Adam WAXED Tom Lipton in 0:36.51 seconds. So when Keith challenged, they really changed it up on Jaw preset.
@wheelieking71
@wheelieking71 8 жыл бұрын
If Adam had to loose, that is the correct guy to loose to!They are two of my three favorite you-tubers. The old dude that built the contraption is the other one! LOL
@1970chevelle396
@1970chevelle396 8 жыл бұрын
There both excellent machinists . No one else could even come close to winning against Adam.
@Try01
@Try01 8 жыл бұрын
they are both very good
@gatti5002
@gatti5002 8 жыл бұрын
getter done !
@turbocobra
@turbocobra 8 жыл бұрын
Watched it live. Hope Adam doesn't take it too hard, he got beat by one of the best, years of experience, keith prob could indicate with his eyes closed!
@1970chevelle396
@1970chevelle396 8 жыл бұрын
I didn't think Adam could ever loose. But Keith has over 20 years more experience.
@GregsGarage
@GregsGarage 8 жыл бұрын
That was fun.
@TheMetalButcher
@TheMetalButcher 8 жыл бұрын
I think the chuck size was to Adam's disadvantage as well.
@JWB671
@JWB671 8 жыл бұрын
When was the last time Adam used a chuck or key that small though?
@1970chevelle396
@1970chevelle396 8 жыл бұрын
I don't think he ever used anything before with a chuck that small.
@rickboh
@rickboh 8 жыл бұрын
Keith also uses large machines so i think they started even :-/
@JWB671
@JWB671 8 жыл бұрын
+rickboh Keith has a couple of little lathes in the room behind his big one he uses on occasion.
@hopper1
@hopper1 8 жыл бұрын
I wonder if a Noga indicator holder is going to start showing up in Keith's videos?
@1970chevelle396
@1970chevelle396 8 жыл бұрын
I'm not sure why Keith never uses Noga's. There the best. I have 3 of them myself.
@cerberus0413
@cerberus0413 8 жыл бұрын
You make more profits if you spend less money on tools when you have ones that work.
@tonyennis3008
@tonyennis3008 8 жыл бұрын
I see some smug satisfaction at 2:21!
@scottsinfl
@scottsinfl 8 жыл бұрын
That was a cool contest.
@moparlarsson
@moparlarsson 8 жыл бұрын
Get 'er done!!!!!!!!!!!!!!!
@frozo12
@frozo12 7 жыл бұрын
My favorite youtubers are also there Tom lipton n John Saunders
@wtbm123
@wtbm123 8 жыл бұрын
Cool
@dougankrum3328
@dougankrum3328 8 жыл бұрын
Yeah, but very close...couple of seconds....and what exactly was the criteria for accuracy....1/2 a thou....2 tenths....1 tenth....? I watched a lot of the KZbin video/s, didn't see that explained.... No surprise Keith Fenner came out on top with Adam....Keith has been a machinist since about the time Adam was in kindergarten.....
@1970chevelle396
@1970chevelle396 8 жыл бұрын
Most Accurate and Fastest was the criteria for the competition .
@southjerseysound7340
@southjerseysound7340 8 жыл бұрын
true but Adam grew up with a shop at his house..............this is just a case where age and experience trumps youth though.I like both guys but I'd have put my money on Kieth ;)
@andrewwilson8317
@andrewwilson8317 8 жыл бұрын
Life in the old dog yet....! What's the test parameters? What sort of time is a winning time? What accuracy level required? Might have a wee practice between job in the shop.
@1970chevelle396
@1970chevelle396 8 жыл бұрын
Fastest time and most accurate.
@blakehammond5076
@blakehammond5076 7 жыл бұрын
is that ave!?
@1970chevelle396
@1970chevelle396 7 жыл бұрын
Blake Hammond Everyone keeps asking me if this is AVE. I'm not sure who that is. Keith Fenner and Adom Booth are in the video.
@davidmeale9572
@davidmeale9572 8 жыл бұрын
seemed like 10
@tomotyke7883
@tomotyke7883 3 жыл бұрын
Standing behind a big guy no matter how much you zoom in and out is not very good video.
@letsgobrandon2976
@letsgobrandon2976 Ай бұрын
Tom lipton was the worst with his trick break away chuck. What a cheater thats the only way he could win
@1970chevelle396
@1970chevelle396 Ай бұрын
Tom Lipton would never cheat. 😳
Heat Treated
17:15
Keith Fenner
Рет қаралды 8 М.
What's in your box? Giveaway 2015 Part 2
1:17:56
Keith Fenner
Рет қаралды 23 М.
Я сделала самое маленькое в мире мороженое!
00:43
CAN YOU DO THIS ?
00:23
STORROR
Рет қаралды 44 МЛН
这是自救的好办法 #路飞#海贼王
00:43
路飞与唐舞桐
Рет қаралды 69 МЛН
Innova 5610 Scan Tool Review @InnovaAuto
10:00
1970chevelle396
Рет қаралды 5 М.
B&T APC-9: The Swiss Answer to the MP5
19:03
Forgotten Weapons
Рет қаралды 116 М.
The Indexer
26:35
Keith Fenner
Рет қаралды 6 М.
Victor Davis Hanson: The Final Case for Donald J. Trump
1:14:20
Robinson Erhardt
Рет қаралды 441 М.
Mounting A Four Jaw Part One
22:45
Keith Fenner
Рет қаралды 47 М.
The Vagabonds "It's A Good Day and Route 66" on The Ed Sullivan Show
3:27
The Ed Sullivan Show
Рет қаралды 7 М.
Brake & Clutch Shaft
33:18
Keith Fenner
Рет қаралды 7 М.
DIY Geared Rotating Engine Stand
3:24
Rocky Mountain Extreme
Рет қаралды 36 М.
OWEN MOORE - Let It Be Me
3:01
owenomoore
Рет қаралды 5
Я сделала самое маленькое в мире мороженое!
00:43