Making a Small Parts Cutting Jig

After receiving a multitude of questions and requests about the small parts cutting jig that I use in my model builds, I thought it only fitting to bring it to this week's show. I have made a few modifications to my original design and I feel it is a much safer jig than the original. I hope you enjoy it.
If you are interested in the light duty hold downs that I use for this project, you can find them here.
www.amazon.ca/...
If you haven't already, please consider liking and subscribing to the channel. I have an incredible audience base here on the show and I'm hoping that you will consider becoming a part of that community.
As always, I want to thank you for taking the time to stop by the channel and tune in to today's episode. It is truly appreciated.
If you are interested in the dust masks that I use on the show, visit www.bcmask.com
#basecampmask

[@barry.w.christie]

Another cracking jig, one of those things you didn't realise you needed until you started using it, excellent 👍 The only change I'd make is to remove the gussets and use L shaped brackets on the two sides, they'd give the strength required without limiting the size of the wood you can put on for cutting 😀

[@acutabove_woodworkings]

Thought of that Barry but for me, I know what size stock I cut on these jigs and they will all fit in that cutout on the left side gusset. I guess it's all about what suits your needs. Thanks for tuning in

[@barryroberts6470]

Cracking jig Kenny, very useful for everyone to use especially for the model makers like yourself. Take Care. Barry (UK)

[@acutabove_woodworkings]

Glad that you liked it Barry. Thanks for tuning in this week.

[@dougprentice1363]

Another well thought out design. Im here from the dice 🎲 video.

[@acutabove_woodworkings]

Glad that you like the jig. I've used one like this for years and this one is just an improved version after seeing the drawbacks of my original jig. Thanks for tuning in Doug.

[@paulsmessyworkshop]

Kenny,, clever design and yes there will be one in my shop.

[@acutabove_woodworkings]

Glad to hear it Paul. It's always better to get the jig to hold the smaller parts than to trust your fingers. Good luck on your project and Thanks for tuning in this week.

[@williambuckley1185]

Hi Kenny. this was a good video. well worth the watch. Always enjoy new things you come up with each time.✍

[@acutabove_woodworkings]

Glad that you liked it William. Thanks for tuning in and for taking the time to leave your comment.

[@harleywood9588]

Another good show

[@acutabove_woodworkings]

Thanks Harley. I appreciate you tuning in.

[@floydolden6850]

Hooray, the small parts jig ! And updates too ! I can also see this used to cut grooves in dowels and ,of course, the small parts. Great jig to add to the collection ! Thanks Ken !

[@acutabove_woodworkings]

You're very welcome Floyd. I'm glad that you liked it. Thanks for tuning in this week.

[@bigsparky65]

Great jig, have to make one. Thanks for the tip.

[@acutabove_woodworkings]

Glad that you liked it. Thanks for tuning in and for taking the time to leave your comment.

[@markduggan3451]

It's really great jig.

[@acutabove_woodworkings]

Glad that you liked it Mark. Thanks for tuning in this week.

[@aaronblackford981]

Lovely

[@acutabove_woodworkings]

Glad that you liked it. Thanks for tuning in.

[@troycogan1030]

Again Kenny, another fantastic jig to add to the collection thanks for the efforts you put in to these tutorials. 👍🏻🇦🇺

[@acutabove_woodworkings]

You're very welcome Troy. I'm glad that you liked the show. Thanks for tuning in this week.

[@pdwoodwerkz9625]

👍👍👍 Another terrific and informative show today. I really like the updates you made on the jig. I think that anyone who needs a lot of small parts fabricated will truly appreciate this jig. Thanks, Kenny and see you again next week.

[@acutabove_woodworkings]

Thanks for the kind words on the show and the project. I appreciate you tuning in.

[@malk1275]

Wow need to make that , thank you

[@acutabove_woodworkings]

You're very welcome. Thanks for tuning in this week.

[@DaPaVo358]

Great little jig Ken, Will have to have one for sure Thanks, David.

[@acutabove_woodworkings]

I hope you do David. Good luck on your project. Thanks for tuning in and for taking the time to leave your comment.

[@FearsomeWarrior]

Thank you.

[@acutabove_woodworkings]

You're very welcome. Thanks for tuning in

[@dennishall9260]

Very handy little jig! Great job Kenny!

[@acutabove_woodworkings]

Glad that you liked it Dennis. Thanks for tuning in this week.

[@marcov787]

Boa ideia, bom gabarito. Vou fazer um com essas dimensões, tudo de bom.

[@acutabove_woodworkings]

I'm glad that you liked the project. Good luck on making your own jig. Thanks for tuning in this week.

[@David-es6vc]

I would add a second slot for the clamp to keep it straight. It does it need to clamp tight just be able to slide.

[@acutabove_woodworkings]

That's what this show is all about David. Taking a project idea and making it your own. Great suggestion. Thanks for tuning in.

[@aaronblackford981]

Your garage is confusing. Love it as it seems like mine. Will you share your daily work?

[@acutabove_woodworkings]

I'm not sure what you mean by my garage is confusing. Are you asking what I do for a living? Thanks for tuning in.

[@aaronblackford981]

@@acutabove_woodworkings yeah. What do you or did you do for a living, aka, daily work? Mine looks way worse tbh but I am slowly getting it together again. Your one of the few makers that just seems to love making. Doesn’t matter if wood, metal, glitter, or whatever.

[@acutabove_woodworkings]

@@aaronblackford981 I work full time as an electrician. I also have qualifications as a structural welder but I just use those skills for fun. The KZbin channel is just a hobby for me but with over 875 episodes of the show posted on my channel, it might be a bit more than a hobby now. LOL.