Video came in very handy.. all lights are a go.. thank you for this visual
@tdz697 жыл бұрын
Just installed. Great product. My ONLY suggestion would be to use a better gauge wire. The wires are way too thin. Other than that a nice way to run without a spare.
@kentrolinc.67897 жыл бұрын
Thanks for the feedback, Troy!
@goooser4106 жыл бұрын
Totally agree. Great product. the gauge of wire is a issue.
@DanDan-ux9lk5 жыл бұрын
I just got this product delivered. Looks nice another suggestion besides wires LEDs looks like they are placed with double side adhesives doesn’t look it will last.
@SGT_O5 жыл бұрын
Dan Dan I noticed the same thing. I am going to epoxy the light to make sure it won’t budge. I read other reviews on Quadratec and Amazon that had the light detach.
@srtpusher3 жыл бұрын
Just installed this on a 2007 jku. For the taillight, the white wire with purple stripe was not the correct wire on my jeep. What I did to find the right one: connect the ground Take the red wire and touch the pins until the light turns on. Tap that wire. Hope that helps someone
@timsimmons79166 жыл бұрын
Is it too greedy to ask for a plastic plug for the old plate holder?
@lvmybears6 жыл бұрын
Tim Simmons Yu mean included with the kit?I totally agree,shouldve been there from the beginning.
@blakehaddock83465 жыл бұрын
Installed this last night following this video and the included instructions. The problem I’m having is that I’ve got power to the license plate light, but the brake light will not work. I have the red spliced into the white/ purple & the black spliced to the black. Any suggestions?
@stevejaeger90993 жыл бұрын
I'm planning on using the Scotchlok connectors. Any negatives about that?
@johnfarr54156 жыл бұрын
Just ordered this kit for my 2012 JK and can't wait to install it. Installation looks straight forward but I do have a wiring question: why did you opt to splice into the 3rd brake light wiring rather than to simply go to the 3rd brake light connector?
@kentrolinc.67896 жыл бұрын
Hey John, thanks for the question. We wanted the third brake light wiring to remain in tact in case the customer would ever want to reinstall their OEM equipment, and splicing at the tailgate offers easy access. If you like, you can use the third brake light connector to make it a more plug-and-play installation. Please let us know if you have any other questions or concerns.
@johnfarr54156 жыл бұрын
Sure...I'm not talking about cutting it though. Talking about sourcing the appropriate connector. I'm looking into it for my setup (which should arrive today) so that I don't have to cut the factory wiring.
@bkr00676 жыл бұрын
where did you get the appropriate connector ?? thanks
@stevenm18324 жыл бұрын
I want to order this product but don't like the idea of splicing the wiring. What are the connectors called and could they picked up and used for install for a cleaner looking install? Thanks
@DomT_19875 жыл бұрын
Where did you get that supply wire from???
@mystatwo3 жыл бұрын
Is there no way to get switched power from the tailgate latch wiring rather than going all the way to the tail light for the plate light?
@kentrolinc.67893 жыл бұрын
There isn't no. The light is specifically fused that way.
@clsteinhagen22305 жыл бұрын
Will removing the spare cause my tire pressure light to come on?
@juansevenTV5 жыл бұрын
no
@AmarChumber3 жыл бұрын
is there a way to add the backup camera?
@kentrolinc.67893 жыл бұрын
Do you have a JK or JL? And is it factory or aftermarket?
@AmarChumber3 жыл бұрын
@@kentrolinc.6789 jku with the Pioneer aftermarket camera
@kentrolinc.67893 жыл бұрын
@@AmarChumber Would you be able to send a picture of it to our Customer Support, or at least get me a link to which model you have, please? I might have a solution, but I need to make sure which version you have.
@kentrolinc.67893 жыл бұрын
@@AmarChumber We have no proper way to mount that, but luckily it would be pretty easy to drill the 3 holes needed to secure the camera. You could either hide it between the license plate and backside, or between the backside and the tailgate.
@planetxmetal6 жыл бұрын
Plans to design a similar plate for TJs?
@kentrolinc.67893 жыл бұрын
@Diesel On Radio, checkout part #80710. We just released the TJ Version.
@vegasdavetv6 жыл бұрын
nice video
@stellanti7 жыл бұрын
Is there a video on how to remove the stock license plate bracket and then plug it? I'm more concerned about what to do with the wiring for the license plate light.
@kentrolinc.67897 жыл бұрын
Unfortunately we don't have a video tutorial for the removal of the stock license plate bracket. As for the the license plate light wiring, we recommend that you unplug the connector and tuck it into the body. We offer a License Plate Delete Plug, Part no. 80708, to cover the hole. Please let us know if you have any other questions or concerns. Thanks!
@stellanti7 жыл бұрын
Kentrol Inc. thanks. It's actually super easy. Thanks for a great product and very detailed instructions!