Kenwood DMX125 DAB radio fitters review & basic install guide.

[@SCOTTCOD4]

I have had two different sony model headunits in my car that both turned on and off with the ignition, i am currently waiting on one of these headunits to arrive, would i be right in thinking if the previous two headunits both turned on and off with the ignition this should also.

[@steelplayer4945]

Can you tell me if I can change the led's color? I have seen a photo and the default color seems blue.

[@anirudhpanwar6202]

Hi..my similar JVC car stereo..the radio clock doesnt set up...every time i start the car the clock goes back to square one...RDS clock sync disabling also not helping...is it some problem with change of connections??

[@briandrury7314]

Have you a guide for fitting this kenwood to a mk4 mondeo 2015

[@jakubjozwiakowski7735]

@PJs projects Do You know how to factory reset this unit. I got it and it worked for 15mins then started to be unresponsive

[@hwg6158]

Sorry don’t mean to keep asking questions but what size like screen do you need for a polo

[@jamp2237]

Great video, if i buy the Kenwood DMX125 DAB unit, will i need any other ISO harness for it fit my Mazda 5 2010, thanks..

[@milenpashev7249]

Hello, I have a dmx120bt and my question is how to connect parking cable to make the mirroring work. I have to connect the parking cable to ground or positive?

[@PJsprojects]

@@milenpashev7249 Connect to handbrake to be fully legal or connect to ground to bypass handbrake.

[@georgeduffy2654]

Re the parking brake switch and screen going off until stationary. Can you not select radio stations, input, tracks and volume etc? Sorry for silly question. I always thought the menu was always On.

[@PJsprojects]

Yes audio control will work fine.

[@jasonleadbeatter9620]

HI PJ, about to fit this to a 1.6 golf mk5. Will i need to run the red wire to the fuse box and what happens if i just tape off the parking brake cable? thanks.

[@anonymityentity40]

Can anyone help me with the red power wire do I have to rewire that as a new wire or is there a wire I can already tap in to?

[@MrsUnique437]

Hi I have this same kenwood system runs great, how do I find the remote turn on wire for a subwoofer please ?

[@PJsprojects]

It’s the blue one. Your user manual should detail what each colour is for.

[@snowcold903]

Im planning to do something similar to my nissan almera 2006 just that this one in the video is too big, i have found something else that i think would work

[@craigsutton3358]

Is there a Video for Ford s max 60 plate face lift mark 2 please

[@si.147]

Hi mate would this fit a ds3 where the big screen is or would it have to be fitted lower down..thanks

[@k4lkimkii532]

Nice guide, thank you, this is my afternoon job today 😀

[@craigsutton3358]

Gutted it dosnt change screen colour my car is red and the unit is blue

[@jaxonk8744]

Can I go from reversing light fuse with a cable to reversing light sensor on the unit

[@PJsprojects]

Yes 👍🏻

[@sonnyday6210]

none of these reviews show screen mirroring, I was thinking of buying one till I read the reviews on amazon. The screen mirroring dosen't work properly,and it keeps freezing, the pioneer around the same price is the same.

[@VeeWee452]

hi pj. complete novice here... I have tried to install this unit by kenwood into my peugeot 107. I used the tutorial you did on double din application for an aygo. now when you pop on the two cables that power into the kenwood I haven't used an iso connector as both cables fit the kenwood. (remember I'm totally new to this) I have power running to it... and all seems great but it won't hold the memory on the kenwood. so now it goes back to factory settings every time I turn on and off the ignition. is this a case of swapping the black and yello power connectors around in the back of the kenwood?? many thanks. if it wasn't for covid I wouldn't be trying to do this so thanks for the videos you pop on KZbin. been a lifesaver!!

[@PJsprojects]

You need a PC2-36-04 that basicly swaps the two power feeds to the radio around. Don't cut the cars wiring loom incase you end up sending power down the earth cable. Try Ebay item number 362923142459

[@VeeWee452]

@@PJsprojects hi pj thank you for getting back to me. I fitted the pc2-3336-04.. there's a yellow and red wire. . with a connector end on each. I did red to red... yellow to yellow. hooked it all up. but the radio still looses it's settings. any suggestions before I beg halfords for assistance via distance?

[@WeeSmokey]

Hey m8 do u think i should go for this unit for a Peugeot 207cc over the alixpress dash mounted alternative version that fits into the info screen instead ps do u rate the chinese upgrades? Thanks 🙏

[@PJsprojects]

This radio was made three years ago, I don’t know if they are still on sale but would certainly be discontinued by Kenwood. Having seen a few of the Chinese set ups I would personally stay with a branded install.

[@fatguyonalittlebike3336]

Wtf it doesn’t come with the harness that goes into the back of the head unit? When did they start doing this?? Is that just a uk thing? I would be sooo pissed, I’ve never had a car with that ISO factory connector… Kenwood should really re think this because most people aren’t putting these in new cars that already all have screens and im definitely going with the pioneer one if that’s true… end up being the same cost if I need to buy an extra harness with this ish

[@PavanKumar-tw9pi]

how to convert android any options is there

[@naedinelampa7832]

How do you configure the steering wheel control?

[@EduardoHernandez-io5hd]

How can we get the date/ time stay how we set it? I set the time and date but when I turn the car off and back on its wrong again??

[@PJsprojects]

Sounds like you have a Peugeot, Citroen, Audi or VW if so buy a iso cable that switches A the two power feed round. You need ignition switched and constant power switch with each other.

[@EduardoHernandez-io5hd]

@PJsprojects I have a 2006 honda civic. The stereo is the Dmx125bt, but yes I did not conect the constant power cable maybe that's it???

[@PJsprojects]

@@EduardoHernandez-io5hd without constant power is can’t remember anything.

[@EduardoHernandez-io5hd]

@@PJsprojects ok thank you

[@mariop3019]

No screensaver?

[@gshcg5705]

how do i connect my iphone for mirroring? i’ve done everything the internet says, apart from when i go to my bluetooth settings i don’t get the option to turn mirroring on?

[@articlebadbwoy]

It only works with android screen mirroring, not iPhone sadly. Try plugging it in with the usb. That should work but as I use android can't guarantee it. Worth a try

[@florep4744]

Fit a 2005 Pontiac gto?

[@CM-1723]

Does it play mp4

[@PrashantKumar-uz8zu]

How to mirroring.. my screen show 👉 parking off

[@markheath6232]

Mine too. Have you fixed this?

[@jamiehamilton8534]

Hi how do i connect my android phone to this anyone help 🤔 please and thanks

[@harryfosterfilms2013]

How do you fit the live into the radio?

[@theFury1111]

The reception is dodgy! I believe it's due to the heated windscreen

[@frankkjllefjord446]

Glass antenna are always crappy, add in heated windows and you will have reception problems as you found out. Fit a body muted antenna and you'll get way better reception. The glass ones are crappy and cheap to make, thus why you get them for free

[@hwg6158]

What size radio is it

[@PJsprojects]

Double din.

[@hwg6158]

PJs projects okay thanks, I have a the same polo and was wondering what screen size would suit best

[@sorrento8156]

wtf with all the ads...annoying as hell