Kenwood TS-440 Ham Radio Memory Battery Replacement

You are watching me replace the memory battery in my Kenwood TS-440 Ham Radio. I'm not going to win any soldering awards, but I think it will be good enough to keep this rig going a while longer.
My Aamazon Store: www.amazon.com...
#hamRadio #kenwood #ts-440

[@deanmason560]

After the radio ate a couple batteries my elmer just ran wires to a D battery holder on the outside of the radio. It worked great. Gave the radio to a friend.

[@JnJTrueOutdoorAdventures]

Thanks for sharing your video!!! I have a Kenwood TS440 with the auto tuner. It was suffering from the dot issue, but only on the 10 - 15 Meters and 40 - 160. The 17 - 30 Meters worked fine. This TS440 belonged to a good friend of mine who passed away. Apparently he had tried to fix it and remove the glue, but while doing that he broke two different diodes. I had the replacement for one of them and now it works from 17 - 160, but still don't have 10 - 15. Of course that particular diode is hard to find, but I finally found it and ordered several. All I have to do now is after hunting season is over put it back on the bench and replace the diode in that circuit and hopefully the dots will be gone from that part. Right now I am using the radio since I mainly operate 20, 40 and 80 Meters. At least now I know where and how to replace the battery. Keep up the great videos my friend and hope to hear you on the airwaves again. Juddie - WD8WV

[@SevenFortyOne]

Thanks Juddie. Mine had the tuner too but it doesn't work....I haven't tackled that yet. And I have some more work to do on the dots issue...the VCOs meet to be trimmed ad it's off frequency now. 73 and good luck with your 440!

[@kn9ioutom]

GREAT VIDEO ! 73

[@perryscott1140]

Thanks for the tutorial. Very clear instructions. I used the W09-0599-05 battery from East Coast Transistor parts. $14 shipped. Direct replacement. In my '440, Kenwood slightly sprung the battery tabs downward while the solder was hot. Solves the vibration problem without the annoying tape. Re: ESD (static) - who needs wrist straps? :) Just touch the metal chassis often. It also doesn't hurt to briefly touch the soldering iron to the metal chassis. Cheers!

[@asgervindkristensen7455]

Thank you very much for a really nice video. That was exactly what was wrong with my TS440S. I thought it needed to be replaced but it was just the battery. Now it actually runs fine again. Many thanks from OV1AV

[@yannickevenas]

Thank you for the walk through. I will certainly have to do that on my Ebay purchase that will come in next week, as the scrambled display have been reported.

[@vk6kfk]

I've just done it, waiting till the morning for 2nd test..

[@hamrad88]

You definitely have awesome radios. Thanks for sharing and thumbs up.

[@SevenFortyOne]

Thanks Tom....like you, I've been collecting for a long time.

[@eminusipi]

I replace the battery in my ts-450sat. If I had to do it again, I would find a way to install a battery holder rather than soldering in a new battery and I would relocate the battery to a more convenient location.

[@buzzsah]

an oldie but goody.

[@Techrewinds]

Super nice setup loving it keep up the good work!😍

[@jrmorris1161]

GREAT VUDEO--I JUST GIT THIS RADIO DUVE TO ME AFTER MOTHER NATURE TPPK PUT MY RADIO AN YOUR VIDEO HAS HELPED ME GET IT SET UO.AND IT IS WORKING VERY WELL...THANKS AGAIN AN 73SW FROM KF4IZY JR IN TUSCALOOSA ALABAMA.. SORRT FOR ANY TYP OOS I AM SIGHT IMPAIRED....

[@SevenFortyOne]

glad this helped!

[@K2CTC]

Well done. I may have to do this w/a TS-430 I'm picking up this Saturday. Just curious about soldering the battery itself: what was your temp here? Looks like even a second or two too long and you're going to injure the new battery.

[@billn3ry662]

The maintenance manual is online and shows the disassembly procedure.I think you leave the bottom screws in and they are not taken out all the way to allow the head to pivot like on the TS 570.

[@SevenFortyOne]

I didn't bother looking up the manual and went by directions I got from a friend...I think I heard him wrong with regards to which screws to pivot on. Either, taking all 4 out worked fine...just have to be careful

[@trailbossx2]

I have the ts140s,,,I'm assuming the procedure is the same,,for dead batteries,,,so my question is,,,will the radio work normally, EVERY TIME, WITH THE RESET,,,,, with a dead battery,,,after doing the reset sequence,,,but WITHOUT changing the battery,,,,?,,,I realize, I'll have no memory, but it beats the 200 buck, battery replacement charge, for an 8 dollar battery, from kenwood,,,,,thanks,,,,,informative vids😎

[@SevenFortyOne]

I think it will work if you reset it.

[@trailbossx2]

@@SevenFortyOne ty sir,,,😎

[@scratchdog2216]

My 1990 R-5000 needs this. Already had it apart. Tight quarters. Also going to do a warm white LED panel bulb, mine's dead. Good info, Thanx.

[@SevenFortyOne]

I have to open mine up again...the VCOs are still flaky...I didn't get all the goop off of the PCB I guess.

[@1crazynordlander]

You are braver than I. I have the shakes so it is near impossible to do small work anymore. What power supply are you using? Thanks Kevin KA0KAE

[@CQN1HN]

Nicely done ! Too bad they couldn’t have designed that better , but u guess how often would that battery really need to be replaced , 10yrs or something probably

[@SevenFortyOne]

They probably figured these things wouldn't hang around that long and didn't worry about it. As long as it lasted longer than the warranty period they were probably happy.

[@alex26641]

Nicely done. I always felt that if the device, radio or computer required a battery for memory retention, the battery should be accessible and replaceable without tools.

[@confusingdalek709]

according to the manual, they expected it to last ~5 years and for you to send it in to them for repairs once it happened.

[@buckeye5704]

Nice to see you're gettin the old gal back on the air. I saw it on the bench in your new Future of... video and was wondering if you'd got back to it. 73

[@SevenFortyOne]

The VCOs still need some work....just have to find the time to finish it off. I love the old Kenwood radios

[@buckeye5704]

@@SevenFortyOne I really enjoyed my 480 on mobile this summer. Can't wait to get the house nearer to done and set up my shack with my 440(s). You have yourself a Great time tonight and be safe. Happy New Year from Ukraine.

[@SevenFortyOne]

@@buckeye5704 73! Have a great 2020!

[@statmanSL]

I see that you mentioned repairing the "dots" problem by cleaning the VCO's....Did you make a video of the that procedure? Thanks!

[@SevenFortyOne]

No, I didn't think I could add much to what kb9rlw had already mentioned in his video on the subject

[@Radiowild]

It's back to health!

[@SevenFortyOne]

It's feeexd!

[@chuckrann9784]

Same problem after years of inactivity but chose service. My eyes aren’t what they use to be. Also removing Sony-Bond from board. Any suggestions on replacing worn off button labels? RIT, TRX, A=B, etc worn off. Decals available?

[@SevenFortyOne]

I'm not aware of reproduction labels but there could be some out there somewhere ...

[@erivaldosilva1614]

muto obrigado mesmo sem emtemde mais deu certo

[@sniperchaz111]

i dont have any of the 3v type batteries with the side coverings like you have but i do have a stack of CR2016 and CR2032 lithium button batteries would the be ok to use if covering with tape around them there 3 volt button batteries so with care i would guess they should be ok. but would sooner check with somebody just incase

[@SevenFortyOne]

If you can attach leads to it and put it somewhere it won't short to something else in the radio it should work....but I'm not a doctor so keep that in mind if you try this

[@sniperchaz111]

@@SevenFortyOne thanks yer ill take care when i do it iv also got the dreaded dot screen problem but i dont know for sure if its caused by the dead battery as the radio came from america and had been switched of for long while it did work ok for about a week i got an auto atu for it but couldnt get it to work seems theres two trypes one european one for usa and ironicaly the radio is a european model it was only after trying to install the atu that i developed the dreaded dotted screen i would tackle the vco cleaning procedure but parts are very hard to get in uk for lot of the earlier model radios so will have to go on major hunt for spare parts im hoping changing battery and doing factory reset might fix the problem even if for few months lol once again thanks and good vid id never found the battery housing without it

[@SevenFortyOne]

Definitely try the battery and reset first. I found that warming up the radio helped with the dots too...in other words if the room you are in is cold try it on a warmer room and see if the dots go away

[@christianhonnorat1365]

Many thanks. I just bought one few days ago. I will add a cr2032 wired holder. Wires can pass thru the shield somewhere I hope. Regards from France.

[@antennebuis]

tu gl 73 but one quenstion why is my 440 deaf on the broadcast bands ?

[@SevenFortyOne]

I don't know

[@user-jk4bt1sn1r]

How to change battery memory of icom 271 or reprogramming it to make it 141mhz to 157mhz

[@butterbean4195]

does anybody know if there is a way to run the 440 from the computer or is it just to old for that?

[@Dreamlgider]

yes it had CAT option.

[@jaybaypay6997]

I had 2 of these radios there junk I will never own another one.

[@SevenFortyOne]

Ok

[@jaybaypay6997]

@@SevenFortyOne I wasn't trying to be rude or nothing I guess the way I worded it lol yeah I had problems with 2 of these Radios so after that I was like no more . So I have the yaesu ft840 witch is not a bad radio for its age.

[@SevenFortyOne]

No worries.. I didn't take any offense...no one radio is perfect. Some people will prefer one over another too.

[@RollerCam]

Stick to CB. Your opinion of these classic radios has been found lacking.

[@1958johndeere620]

So you don't recommend rubbing a balloon on my hair for 5 minutes before I attempt a repair like this? LOL! That type of repair is not for me. Been using my hands as hammers for years, so the fine motor control is just not there.