Keter Folding Work Table

[@bobbischutz4944]

I was just wanting to see how to adjust the clamps but I learned a few new tricks from you!

[@kletops46]

Just Ordered one... Thanks for the advice about the Handle. I also saw some comments about the handle elsewhere.

[@sproglode]

A really excellent video, and thanks for helping me not to break the handle. Like you, I thought that you used it to break down the bench - good of you to speed up some of the repeat actions, few do that, and I'm impressed by the dustpan and brush, and of course the fridge which I assume holds the beer 🙂

[@GeeWhizRS]

Yes, that fridge is full of beer. :)

[@markm49]

Had one of these for years. Sturdy, well built piece of kit. Seen some hammer over the years but for the price well worth it.

[@jonnyevans1151]

Literally spent 20mins trying to get the clamps back in and couldn’t Figure it out till I saw you pop them out 😂😂

[@GeeWhizRS]

There’s a bit of a knack to those clamps for sure.

[@paulprescott7913]

Marvellous piece of kit. Dont know how i managed without one.

[@deanoboland]

Great work on video mate 👍👍

[@prisonerofrnr]

Brilliant design. Use mine all the time.

[@itscrucial]

Thanks for this.

[@nidderdaleelectrician8891]

Lovely review. You might have just convinced me to buy one.

[@GeeWhizRS]

Thanks mate. It’s a cracking bit of kit. 👌

[@shacharlahav]

Can I use other clamps in the keter workbench rails? I'd like to buy a used one but it comes without any clamps. thanks

[@GeeWhizRS]

I have no idea which third party clamps may fit. Maybe contact Keter customer services and ask if they sell the clamps separately. 🤷🏼‍♂️ I haven’t used my clamps yet. I have some Stanley ones I leave clamped to a shelf in my garage that are easier to grab. I wouldn’t worry about having clamps that fit into the lower shelf personally.

[@mikewilson8594]

Thank you for that great tip!

[@JuiceBanger1]

I sat on mine when i got it and it cracked 2 inches. I am 119kg. Ive also seen keter products broken after shop staff have made them for display in homebase. Cracks seem common.

[@GeeWhizRS]

That doesn't sound good. They probably load test them very carefully and evenly and not with big lads jumping on them. 😁

[@JuiceBanger1]

I thought it would be ok given what they said. Had to lower it today to take it up the attic to do a job. I've had my ooni pizza oven on it for 2yrs

[@MrChadwicj]

Thank you for this video. How substantial are the clamps supplied with the Keter folding workbench. Do you know the clamps pressure/force?

[@GeeWhizRS]

I've no idea of the force they clamp with John. They're pretty strong if a little small.

[@jonathanrose456]

There’s a button on top to release the centre support

[@GeeWhizRS]

Not on this one there isn’t. 👍

[@robertdybell6604]

Yes, there is! It's the red square button near one of the rails, depress the button, and pull the handle towards you.

[@jonathanrose456]

@@GeeWhizRS It’s the red button just off centre on the top. It pops up/down for me without having to go to the underside.

[@GeeWhizRS]

@@jonathanrose456 not on this model. 👍

[@jonathanrose456]

@@GeeWhizRS I can see the button on the top of yours in the video. Is it broken? You mentioned that some bits fell off.

[@ipaddy]

Thanks for the video i have subscribed and Just looking to buy one of these where did you get yours and how much please

[@GeeWhizRS]

Hi, thanks. I got mine from Toolstation in the UK. It was on a special offer for about £58 if I recall. Keep an eye on hotukdeals because these pop up fair often on offer.

[@paulfern78]

It looks so low?

[@GeeWhizRS]

I’m tall. If you look into buying one check out the dimensions on the sale page.

[@elconquistador932]

I use my buddy’s Keter all the time. Last week I had one of my Spaz Moments and snapped a leg off of it. I bought him a new one and I took his. I cannot find any replacement parts so its just me and my Tripod now. It was 100% my fault, I can break anything with little to no effort, its a gift. Any Idea where one might find a Leg for my Tripod? Thanks in advance.

[@GeeWhizRS]

😂 No idea where to get a leg, but am intrigued as to how you ended up hobbling it.

[@elconquistador932]

@@GeeWhizRS Brut stupidity.

[@alloutofdonuts3998]

Do you think it could really hold 1000 lbs? I don’t need anywhere near that so I’m not worried, just curious as it’s quite the claim!

[@GeeWhizRS]

If you get one you’ll see it’s all a structural build. The claim likely holds water but that will probably be a carefully placed even weight. If you need to support 1000lbs and work with it I think you’re into something a bit heavier duty. If it can support my 95kg with some wiggle that’s plenty for what I need. For the price it’s a great buy. Let me know your thoughts if you pick one up. 👌

[@alloutofdonuts3998]

@@GeeWhizRS Thats cool, and ya it makes sense. I can’t imagine anyone actually putting 1000 lbs on it, but you never know. People putting gasoline in bags is something I couldn’t have imagined happening lol. But I ended up buying a Hart folding work table because the local HD didn’t have any of these. This Hart table also claims to have a 1000lb capacity but again i have no need for it to hold that much weight. It’s purpose is to limit hunching over/working on projects, like my lawnmower deck. So far it’s been a godsend and seems fairly rugged for what it is!

[@GeeWhizRS]

@@alloutofdonuts3998 Glad you got sorted out with a new work table. As long as it does what you need that's all that matters. 👌🏻

[@robertmunguia250]

Can you do a rip cut on it? I wonder if it will hold.

[@GeeWhizRS]

If you are meaning with a circular saw, then you would likely need to have a hand on the table unless the wood you are cutting is thin. The table is light so wouldn’t take much to move it with any sideways force.

[@robertmunguia250]

@@GeeWhizRS yes, or could it be clamped with those that come with it?

[@GeeWhizRS]

@@robertmunguia250 The clamps will hold a workpiece without issue. But they won't prevent the table from lifting at one end if you are cutting a longer piece of wood.

[@SuperKiko112]

Can you stand on this for example?

[@GeeWhizRS]

Depends how heavy you are. 😉

[@SuperKiko112]

@@GeeWhizRS 85 kg

[@dm9706]

The table seems low, might be a bit hard on the back, hunching over.

[@GeeWhizRS]

I’ve used it quite a bit and it’s been fine. I’m 6’3” so that might be making it look low.

[@alloutofdonuts3998]

I’ve been needing a table to work on projects for a while now but I don’t have room for a solid one in my workspace. My back is hurting from every time being hunched over working on stuff on the ground. I’m sure this would be a million times better!

[@TonyDavisSaxophone]

Sadly, I watch the Keter video first that said pull on the handle... Should have watch yours instead!

[@GeeWhizRS]

Oh no! I bought mine from Toolstation and they just swapped it for me without issue. Hope you get sorted with a replacement.

[@puppyloveee-jn6ck]

It looks really short 🤔

[@GeeWhizRS]

A familiar cry in my bedroom. 😂

[@puppyloveee-jn6ck]

@@GeeWhizRS 🤣🤣🤣🤣

[@JAaurora2419]

Unless this guys huge this is too low, back would be recked rounding over this

[@GeeWhizRS]

6’3”. It works fine. 👍

[@markgb]

press the release button on top, then the flap with the handles is unlocked

[@GeeWhizRS]

There’s no release button on this one I have Mark. Just a locked indicator and that doesn’t press. 👍

[@9plusinstalaciones]

@@GeeWhizRS the locked indicator is the release button.

[@GeeWhizRS]

@@9plusinstalaciones not on this one it’s not. 👍

[@sunshinechild-sv9kc]

@@GeeWhizRS lol everyone keeps saying this to you- just put a heading at the top its not a fuking button ok

[@GeeWhizRS]

@@sunshinechild-sv9kc tell me about it. 😂

[@andreiiasi]

This table is for children. It's up to your knees. You breaking your back trying to work on this table. Should be at least as high as your waist.

[@GeeWhizRS]

It's actually fine. I'm pretty tall. 😉

[@andreiiasi]

@@GeeWhizRS Yeah I've seen how you were bending down over that table, like picking coins up from the floor. LOL

[@GeeWhizRS]

@@andreiiasi 😂

[@pauljohnson9326]

Yup it's definitely too damm small

[@pauljohnson9326]

This looks great but why in God's name is it so small , gonna get a bad back working with this.

[@GeeWhizRS]

It’s fine mate. Just looks small cause I’m a lanky bastard. 😂