Crosman 1377 Chrony Test And Full Review

[@jerrycrowe8448]

Haha I get heck from the wife after a night shift as she can hear me pumping up the 1322.I lose track of time sometimes and can literally start in morning till night, then Iam tinkering with something. Love the content always about the classic crosman I still can't believe I just got back into them.

[@KevinMillard68]

That is awesome!

[@SusanMillard]

Sounds like Crosman needs to pay more attention to quality control, between this gun and the 1077. Sheesh.... at least these things can be fixed or replaced. 👌😊

[@KevinMillard68]

very true

[@ALfa_Channel365]

Hey Kev.. I tried drilling out the TranPort a verry small amount with a drem...drill... Seems to be punching a bit more into the 2×6 i set up for shots at 10yrds..i also tried stretching the hammer spring a bit to see if it would help dump all the air. Seems to work a bit better for me. 👍

[@KevinMillard68]

cool stuff well done now pump itup 20 times muhaaaaa

[@ALfa_Channel365]

Hey Kev..✌seems i keep lookn up info for my guns and you got the answers 👍 ill be drilling out my transfer port soon just a lil bit. I already drilled and tapped the hole in back of piston. 🎯

[@KevinMillard68]

cool

[@99ron30]

You can plug the air bleed hole on the Canadian valve. I think you need a 2.5mm tap, a tiny 2.5mm screw and some loctite. You should get over 500fps and around 5.5 foot pounds at 10 pumps.

[@KevinMillard68]

tell me something i don't know , i been modding ariguns for a few decades now

[@aussieshooter5358]

Thumbs up mate!

[@KevinMillard68]

Much appreciated

[@trevmiff7192]

Hey I'm a new subscriber i like your channel I'm right in air guns myself I have every airgun you have and then I have a few that you don't my question to you is can you do a video on all the things they do to detune airguns if you know what they do as far as the spring break barrels and the Nitro piston break barrels that would be very interesting video I have no idea how they do it

[@KevinMillard68]

every gun is different how its done but i do know how a large majority of them are done so yes i can do a video on that for you give me a couple of days

[@RcNickster709]

Cool man.. Yup look pretty decent. $78? I mean seriously!! cant go wrong.. Oh and I totally agree at my age, It would be C02 all the way... To heck with the pumping. lol Thumbs up.. :)

[@KevinMillard68]

thanks man

[@jerrycrowe8448]

If you were to convert a 1322 to a 77 wouldn't that get you into 100fps with 7gr pellet. I realize it's expensive but would there be any issues doing that conversion.

[@KevinMillard68]

in canada the issue is if it shoots over 500 at 10 pumps with a 7.4 grain the US 1377 is rated at over 600 fps it wont do it with a 7.4 but it will do over 500 how ever i know how to tune these so they behave and stay just under i have some parts on order once they are in stay tunned

[@ronleblanc9832]

See your keft handed so am i do you find the safty nob bother you it bothered me so when i did a little work on the trigger and sear i tried reversing the safty it worked on the 1377 and i did the safty and trigger on a 2240 and reversed the safty the safty bothered more on the 1377 than the 2240 .like it better switched

[@KevinMillard68]

yes iam left handed shooter and cool

[@CowboyAxe]

An off topic question. The Crosman 795, How did they detune it for Canada?. I bought one for 20 bucks and not sure if it is a USA one. I took it apart and the piston had no bleed hole... was it detuned by a weaker spring etc?

[@KevinMillard68]

cant tell you because its been done a few differnt ways and there are many ways which al companies reduce there power for the non pal market and some guns dont get changed at all because thehy are purpose made for under 500 for everyone and crosman is well known for changing so its a verient problem so i can not tell you and answer unless its in front of me, how they do one spring powered gun from another i know how they do pumpers and most of there co2 guns but the spring power stuff is a differenct game all together and yes even in co2 and pumpers they made alot of changes in each model but i have had many and worked on many over the years so i have a good idea one from another what to look for on average

[@CowboyAxe]

Ok thank you.@@KevinMillard68

[@CowboyAxe]

I greased the main spring and cleaned up the tube, it has decent power, but greasing it made it much more accurate I thing, no left over twang and whammy. If anybody upped the power in this, it would crack apart, trigger housing is plastic.@@KevinMillard68

[@theWZZA]

It sucks that they depower the gun in Canada :(

[@KevinMillard68]

yes it does but then again i do power mod all my airguns to 499 fps so at least get what i should for the upto ratings for under 500 fps how ever in canada if you have a firearm, licence then ytou can buy all the over 500 fps stuf but then you have rules to follow which really suck bad at least wi th the under 500 fps laws and no licence we have no other rules to worry about

[@Tyming]

Believe it or no i killed a racoon with it with a hunting pellet

[@KevinMillard68]

a usa version i can see that being possible but not with a canadain one bot unless it was at poinbt blank range but then again anything is possible

[@Tyming]

Kevys Rc & Music well ya I’m in the us so it shoot 600fps

[@KevinMillard68]

@@Tyming :)