3D Printed - Macintosh Mouse M0100

[@KevinNoki]

This product was discontinued and won’t be for sale anytime soon.

[@danielktdoranie]

It’s a shame your Etsy store doesn’t exist anymore, I was gonna buy one 😢

[@deadpool10005]

I wanna buy it, but this item is not available

[@tedundercarriage8183]

Erm...

[@nicholashein1238]

I too was going to buy one. Please come back to Etsy

[@alexsmirnoff8129]

Are you in any way related to those guys who sell stuff like that on Aliexpress?

[@drxym]

Arguably Apple's dogged insistence on single click mice did them a lot of harm as time went on. Maybe early on the concept was fine but then Windows 3.1, 95 etc showed up and it turned out that yes having a second button, even a scroll wheel on a mouse was something people liked and found useful.

[@oleg..]

Mounting the single microswitch through the scrollwheel hole with two, often ignored, holes at the bottom is definitely the showpiece of this project. What a treat. Have you considered using the mouse feet? No doubt the paint will wear out at the bottom.

[@KevinNoki]

Hi Oleg, thanks for your comment. The mouse has already gone through several revisions. The version that I shipped to customers had rubber feets to prevent it from destroying the paint, and in the last version, I included left and right click, which is going to be available soon to everyone who likes to print it at home.

[@oleg..]

@@KevinNoki It's great to hear that you're improving on the project. I, myself, plan on making something similar, but with many more buttons. Maybe you'd be interested in expanding your product line to have a MMO mouse. In my opinion, the available options are rather scarce. Razer Naga could serve as a great donor, being comparatively cheap on the aftermarket.

[@yorgle]

Awesome! I love that you made a whole new model for it rather than gutting existing broken mice... although I'm sure this way is a lot less expensive. ;D

[@KevinNoki]

Thank you! Yeah it breaks my heart when I see someone doing this with an Original Apple mouse. That’s the reason why I made this mouse :-)

[@tedundercarriage8183]

Did you upload the files somewhere so people could make it themselves? ​@@KevinNoki

[@eclipse_kr]

Great work! Both Retro Macintosh and W0100 Mouse are masterpieces!

[@KevinNoki]

Thank you very much! :-)

[@drewynucci9037]

You’ve done a service to humanity. Thank you

[@Basscannon1138]

💯💯 for the build and having Aperion !

[@KevinNoki]

Thank you Christopher! I still love that game!

[@DavidOx11]

Love the video! Would love to see a modern inspired version, with scroll wheel two buttons and Bluetooth connectivity :)

[@vextechnet5865]

I recently dig up both a keyboard and one of these mice from my grandparents house, was very happy to see it

[@bmci6488]

This was a treat to watch. Would love to see the old IBM mouse with the two dot buttons.

[@KevinNoki]

Thank you :-) why not I’ll put it on my list and you might see it here in the future !

[@nathanaelhood7699]

Now we need a wireless keyboard! You have totally inspired me to make one myself when I get a chance!

[@KevinNoki]

Wireless keyboard is already on my list :-)

[@flink1231]

Great project!! Thanks for sharing!

[@KevinNoki]

Thank you ! :-)

[@RetroRewindRyan]

this is really cool!

[@KevinNoki]

Thank you! :-)

[@MaiElizabeth]

Now it got me thinking. Why don't somebody 3D print the exact magic mouse today but change the charging port placement.

[@a4e69636b]

Fantastic video and mouse. Thank you.

[@KevinNoki]

Many thanks!!!

[@CrazyTechReviews]

Wow! I have to say, I'm really impressed, you sure put a lot of time and work into this project and I'm amazed by the results! Great video!

[@KevinNoki]

Thanks man! You also have a great channel with content that i like I'm going to subscribe :-) Best Regards Kevin

[@alexanhugh9629]

This is pretty cool I would say a good idea would be to make it so that the single button works like a Apple Magic mouse. It can detect which side for right or left click, and gestures work with something similar but not exactly like a trackpad (ie. Without the tracking). That would bring it to the next level. Cant wait to see more mate! Cheerios

[@KevinNoki]

Thank you mate! Yeah that would be great I’ll try to find a solution for this thanks for your input :-)

[@lrcs79]

Awesomeness itself! I hope it’s back soon!

[@retr0-apple731]

Great work! I really like it

[@KevinNoki]

Thank you !

[@vafon3453]

That type-c port is so elegant on your mouse

[@KevinNoki]

Thank you it’s actually a micro USB port. Next version will be USB-C :-)

[@yanksrock1000]

This is incredibly cool

[@KevinNoki]

Thank you my friend!

[@altbeetle]

definitely like it. but why not leave both buttons? it was simply necessary to change the key to one that can be pressed from two sides. make a longitudinal axis to make it impossible to press both buttons at once

[@GeeksWorkbench]

Pure awesomeness!

[@KevinNoki]

Thank you my friend !!!

[@JoesComputerMuseum]

Look at that! RAL 7044! I just found filament for FDM printers in that color.

[@KevinNoki]

Hi Joe! Yes that’s the closest color for retro computers I was able to find out. RAL 7038 and 7037 might also work :-)

[@EldarValue1]

6:48 The world of Nail design.

[@deninaumov6549]

Hi ! When you shop is gonna open? Can't wait to buy this!

[@KevinNoki]

Hi Deni! Thanks for your interest I’ll probably open beginning of next month I’ll give you an update asap:-)

[@deninaumov6549]

You're welcome! If you're reading this, I would like to suggest a project idea - printing out the real size original Macintosh and making it work like an actual vintage one! (The vintage thing costs like 12 times more than the DIY). The case link is www.thingiverse.com/thing:152645 . Thanks for you time!

[@KevinNoki]

@Deni Naumov Yes someone asked me this already in the previous comment this will be my next project since I own a Macintosh classic I’ll Build the 3D model by myself so I can be sure that all measurements are correct :-) I’m trying to get a Macintosh Plus but these are very rare !

[@KevinNoki]

The onlineshop is now open! The Link is in the Description and thanks for your patience :-) !

[@julianmaymon5862]

Bring this back! I missed out :(

[@KevinNoki]

Yes! very very soon :-)

[@royallblood]

Sad that isn't available anymore :( What a great mouse!

[@KevinNoki]

Thank you Carlos! Please be patient it will be back soon

[@KepanoJ]

Carlos don't worry Buy it on eBay

[@JohannesO.-ic4su]

Wieder erfahren dass einer meiner Lieblingsyoutuber Deutscher ist

[@KevinNoki]

Hi Johannes! Danke dir mein lieber viele Grüße! 👊🏻

[@MrGTAmodsgerman]

8:28 Ich glaab, ich spinne! Ene Düsseldorfer Jong!

[@antiphlex]

Realistically, if this was to imitate an actual Apple product, the usb port would be on the underside.

[@sloweast3047]

When will you make another batch?

[@deskcandy]

Been looking everywhere for something like this. Do both sides of that button work like a normal mouse would?

[@polymatt]

I would absolutely love one of these but looks like the Etsy shop is no longer avail. Will there be a second run?

[@KevinNoki]

Sure, the shop is online again :-)

[@retrocomputingnordest-edyc5430]

well, very good. Do you never think to print the Powermac 6100 front cd cover or the Quadra 610 frond cd cover (cd with the caddy)? Thanks

[@KevinNoki]

Thank you! Since I don’t have any of these models in my collection I won’t be able to recreate the CD Cover without proper measurements.

[@retrocomputingnordest-edyc5430]

@@KevinNoki ok thanks. All the 610 and 6100 have the cd cover damaged. It colud be a good idea 😊

[@GenophefeElisabeth]

Unglaublich, richtig gut! Ich würde sofort zugreifen, aber ich glaube nicht, dass ich an einem modernen Windows Rechner auf den Rechtsklick verzichten kann. Hast du mal überlegt, die Macintosh-Maus als überarbeitete Version herauszubringen, also mit 2 Mousebuttons statt einem, oder einer Workaround-Solution?

[@KevinNoki]

Danke dir vielmals! Ja, im Nachhinein hätte ich das von Anfang an machen müssen werde es aber in Zukunft updaten. Der Gedanke war die Maus für Emulatoren von MacOS Classic Systemen zu verwenden welche damals nur einen Mausklick hatten. Sobald ich mit meinem nächsten Projekt fertig bin werde ich die Maus überarbeiten. Danke für dein Feedback und einen schönen Tag wünsche ich dir :-)

[@GenophefeElisabeth]

@@KevinNoki Klingt super! Da bin ich mal gespannt

[@snoxeno0753]

3D printed keyboard next??

[@Michael-Archonaeus]

Now 3D print a matching keyboard!

[@KevinNoki]

Will do! :-)

[@Michael-Archonaeus]

@@KevinNoki You are getting a sub!

[@knipsdings]

coool! haha 👍👍👍😍🥰✌️🇩🇪 vielleicht baust dir ja noch ein bluetooth modul ein, für die neue mouse... 😉🤔

[@KevinNoki]

Auf alle fälle machbar :-) habe mich aber bewusst gegen Bluetooth entschieden um die Maus an jedem Rechner ohne Bluetooth nutzen zu können.

[@novakanator]

Are the plans and part list available? If not can you still buy this?

[@AWriterWandering]

As nostalgic as I am for the Mac classic, those old mice were seriously uncomfortable.

[@KevinNoki]

True, but i won't miss it anymore for the full retro experience when using an emulator :-)

[@altbeetle]

would like to do something similar with the Atari STM1

[@RegisMichelLeclerc]

Next time, you copy the Sun Microsystems mouse and you get 3 buttons to use on an IPX workstation replica... I think it was an ADB mouse too, as Sun workstations used to be able to use a lot of Mac hardware, such as the external CDROM drive...

[@danielktdoranie]

Excuse my ignorance but what kind of 3D Printing is that? I never seen some print come out of a liquid before

[@KevinNoki]

Hey Daniel, no worries at all! Asking questions is how we learn. 😊 This is called an LCD 3D printer. It works by hardening liquid resin layer by layer with UV light shining through a display panel at the bottom of the printer. It's fast and perfect for creating detailed objects. However, you might not see it commonly because it can be messy to clean, the resin fumes aren't great for health, and affordable Devices often have smaller build volumes compared to the common FDM 3D Printers.

[@heyhocodyo97]

This is pretty slick wear can i buy one?? My only suggestion would be make the button grey like the original mouse

[@KevinNoki]

Thank you :-) I’m working on the onlineshop so it will be available soon! Actually it is almost colormatched Apple made different versions of this mouse you can find pictures on google... but you’re right the color will be exactly like the original on end product

[@heyhocodyo97]

@@KevinNoki How much will this mouse cost when its available??

[@KevinNoki]

Can’t tell you anything about the prices at the moments, because I’m still setting up my production and need to calculate the expenses. But I’ll update you when i know more

[@heyhocodyo97]

@@KevinNoki Any updates?

[@KevinNoki]

@@heyhocodyo97 Hi the production is almost ready to start. Shop Opening is set to March 15, 2021. Thanks for your patience :-)

[@piteke100]

stupendo

[@yafflehk]

My immediate thought when you brought out the Macintosh Pi was that it's almost the same size as the mouse, could you fit the Pi into the mouse?

[@AreHan1991]

👍🏾👏🏽

[@KevinNoki]

😀🙏🏻

[@Fabdanta]

👏🏻👏🏻👏🏻

[@KevinNoki]

😃🍻

[@E32-p3b]

What tool did you use to measure the mouse?

[@KevinNoki]

This is a caliper :-)

[@E32-p3b]

@@KevinNoki thank you

[@EriolGaurhoth]

Are the files for this project available anywhere? I'd buy one from your etsy shop, but I see you've taken it down...

[@KevinNoki]

Coming soon :-)

[@EriolGaurhoth]

@@KevinNoki Wonderful!!! I eagerly await this :)

[@sethoberst6310]

Only 7k views, crazy

[@joebromby]

I wood of yust a old mouse off ebay form the 2000s

[@brousil3k0]

Is the model available ? So I can 3D print it myself.

[@KevinNoki]

Not yet! I need to adjust the 3D Model so it’s compatible with another PCB. The electronics that I used for the mouse are not available anymore so you won’t be able to 3D print a functional mouse at the moment.

[@cgwworldministries83]

Should have left the bottom grey.

[@Matthew_Lawless]

You could just have built a bluetooth or USB C adapter.

[@evildinobot]

Charging cable at the bottom? 😂😂

[@KevinNoki]

Yeah, great idea 😂

[@Aurelio_20239]

Mi hermano juanfe me va a regalar una impresora 3D en el día de la amistad

[@RealEfimoMax]

Why did not buy bluetooth mose? usb transiever looks ugly :)

[@tweeleaf]

bluetooth is a lot less reliable in my experience

[@tr0gd0r04-z1l]

Wanted to like the video but its at 512 and I don't want to ruin that.