Thanks for the video. I'm going to try starting the Super AV of my FIL's tomorrow, it hasn't been started in over 15 years. Those were some good tips on the fuel leaking out of the bottom of the bowl or from the intake boot area if the float was stuck open. I'll also remember the "bump" on the float bracket if I have to rebuild/clean the carb.
@Robinson-Homestead Жыл бұрын
Good luck my friend thanks for the comment.
@geraldtrice48945 жыл бұрын
Needle valve are the words you were missing. The float moves the needle valve to control fuel level in the bowl. Your explanation was clear and easy to follow for disassembling, cleaning and reassembling carb.
@Robinson-Homestead5 жыл бұрын
Thank you for the comment Gerald Trice I'm always missing something I have a hard time with words.
@everettefish5310 Жыл бұрын
@@Robinson-Homestead😊
@frankcarrerejr5 жыл бұрын
A few weeks ago I had to clean out the carburetors on 2 of our lawn mowers. I noticed you do the same thing I do when you blow out a jet port with air you blow both ways. Can’t wait to hear it run.
@Robinson-Homestead5 жыл бұрын
Still know spark.
@owensmith51049 ай бұрын
When you put the float back on I couldn’t tell if the small bump faces up or down. I have mine apart now and want to assemble the right way.. the bump was up when I took it apart.
@Robinson-Homestead9 ай бұрын
I'm not sure with out seeing it sorry.
@PaulDGreen-bu4iz5 жыл бұрын
It's going to be fun watching you get this old but y running! Thank you for sharing!
@Robinson-Homestead5 жыл бұрын
I hope I can still know spark.
@davidgibson98665 жыл бұрын
At our Rural King tractor store they sell after market fuel can spouts👍🏻 $4.00
@Robinson-Homestead5 жыл бұрын
Thanks David I will be going to Rural King.
@Hatch615 жыл бұрын
It feels like it's getting close to a start, thanks for the series Kevin, very interesting. Be well my friend.
@Robinson-Homestead5 жыл бұрын
One day Hatch.
@ralfie88015 жыл бұрын
That's not a jet under the floats, that's the needle and seat. It shuts off the flow of fuel when the bowl is full, the floats push the needle up into the seat and close the passage to stop fuel flow.
@gatorsworld5 жыл бұрын
Very good job on the card Kevin....think you got that part all done except the intake to carb gasket....comming along just fine....CHEERS
@Robinson-Homestead5 жыл бұрын
Thanks Gator I will get that gasket and the pipe to the air filter after I get spark.
@jmccracken4915 жыл бұрын
Upside down float will cause problems every time. Good job Kevin.
@Robinson-Homestead5 жыл бұрын
That's for sure Jim.
@tylerdauphinee4 жыл бұрын
Trying to find the correct gasket rebuild kit. There are so many options and some don't look like they are quite the correct ones. Can you help direct me to it? I have the identical looking carbureator on a 1951 Farmall Super A. Thank you
@Robinson-Homestead4 жыл бұрын
Sorry Tyler I sold this tractor so time back.
@raymondgarafano86044 жыл бұрын
check the fuel filter, if it is dirty, engine will not run well at higher speed.
@TheWoodHaven5 жыл бұрын
I don't think I would have caught that float being upside down, but after you pointed it out, it was pretty obvious.
@Robinson-Homestead5 жыл бұрын
I didn't catch it until I was making the video.
@TomokosEnterprize5 жыл бұрын
Hey Kevin. The fuels these days sure raise hell with all fuel systems. Constant additives seem to help though to eat up the ethanol. I love these old carbs. Nice and simple and pro getting worked on as well. You have a nice and common sense post here today bud. Curious as to why you are not using carb cleaner ? Thanks eh. Picking up after others that mean well but screw things up has kept me in a living for years, LOL.
@Robinson-Homestead5 жыл бұрын
I didn't have know carb cleaner at the time I really just wanted to know why the float was sticking thank you for the comment Tomoko I am saving all my silver for a project I would like to incorporate it into a knife handle may need your help one day.
@TomokosEnterprize5 жыл бұрын
@@Robinson-Homestead Holler any time you need bud.