2 WAYS - Solve Epson Printers Stuck in Recovery Mode - Fix Firmware Error

[@BCHTechnologies]

A collection of a few other models: bchtechnologies.com/blog/how-to-put-printers-in-firmware-recovery-update-mode/ If I missed some, please hit "Reply" and comment below. Thanks.

[@pauladriaenssens]

Thanks very much !!

[@jfogassy]

what works for model ET 3750? I tried the steps for the 3700 series but it did not work

[@lefo1488]

SX455W??? will any of it work?

[@Macmadeinheaven1]

My printer won’t turn off at all to try the second mode unless I unplug it. So it’s hard to hold down all these things any thoughts?

[@Macmadeinheaven1]

I have the wf 7720

[@CollegeKooking]

Thank you so much for this remedy! Also, I found that the first method actually worked for me. The shutdown on the printer doesn't happen automatically after the computer completes its update. The power button on the printer started to flicker a bunch of times and I just let it sit for like 5 minutes and it then shutdown on its own. When I turned the printer back on it started up! Thank you so much again for this tutorial video! Cheers!

[@proservicios417]

Saludos. Encontré un canal honesto. Lo felicito su método me ayudó muchísimo. Gracias. Bogotá Colombia

[@jpcb4211]

Yo, the first method saved my life bro. Big shoutout from Brazil.

[@fernandaramirez1888]

You helped me way more than Epson's tecnicals. Thank you very much!

[@fernandaramirez1888]

Epson L4160

[@SmarkDepper]

I figured out myself how to solve this, but starting here. The printer I have is a EPSON L475, the pattern to reach Update Mode was different. There is 3 patterns in total for different models. For me was Cancel+Left+Home+Power. I succeded at installing Firmware but nothing changed. After a lot of experimenting I tried something specific. I picked up an old machine with Windows 7, then I ran the Adjust Program for my printer with compatibility mode for Windows XP SP3 and finally I applied a "Initial Config". After all of that the printer is usable again 😁👍

[@lashontaporter2868]

Will this work for Epson Et-15000? Or what button to press on the Epson15000 printer. Its only has power, home, and help button on it.

[@dombi]

EPSON WorkForce Pro WF-C5790 key combination: 4 + 7 + Job/Status(i) + Power button. Then run the update from a PC. After the update is done, the printer will light up like a Cristmas tree (all lights blinking). Thank you very much for your video.

[@Rodrybur95]

hi! my lights up like a christmass tree too. then I turn it off, then on. IT SHOWS EPSON but then it goes completely black. Only led light on the power button.

[@orlandojr.lobramonte4324]

@@Rodrybur95 how did you turn it off?

[@legoguy23451]

thank you Kevin at BCH, you helped make my tech illiterate mum happy 👍

[@krystinaparrales4002]

Thank you so much the first method worked I am so relieved

[@EM-fk7mk]

xp-15000 doens't have those buttons. Whats the secret key combo on the xp-15000?

[@pinkisenvy]

YES THIS WORKED FOR MY ET-4760!!! YOU ARE AN ANGEL!

[@BCHTechnologies]

Thanks. Working on getting my wings.

[@breannagray2636]

what are the button combos for this model??

[@samirjuris4115]

Thank you very much man! I had this problem and I was able to solve this with your advices.

[@freeaed]

Thanks so much, this solves my problem with the first method

[@ΜΑΡΙΑΠΕΤΡΑΚΗ-ν5τ]

Φίλε, ευχαριστούμε πολύ. Το έφτιαξα!!!

[@BCHTechnologies]

Παρακαλώ!

[@lolalopez4097]

Muchas gracias / thank You so much

[@marleahknights6772]

This also worked for my ET-4750! You do have to wait 5-10 minutes for it to automatically shut down after the firmware update, it won't change immediately.

[@brithanymiraba]

thank you very much this video helped me a lot with the first option I LOVE YOU THANK YOU ❤️

[@inderanim11]

I accidently turned off the printer while it was on firmware update. now its not detecting through cable nor wifi. upon connecting ti iWIC its says Epson MFP-IPL (Service Mode). I dont knwo what to do

[@mtarkiel]

This was on spot for me! It solved my problem quickly!

[@BibekanandaSahoo1987]

I have tried but it's not working still

[@IonutAdrianLuchian]

The First method worked successfully

[@H2OHIPHOPSHOP1]

Gracias me ayudó mucho

[@fotinit9161]

Thanks Kevin

[@princessrachelmolina]

Hello, In this video, you said to press power button, home button, stop button and number 1 if the first method did not work. Do you know what I should press if my printer does not have numbers? I have the Epson 3760 on recovery mode, as well. Thanks in advance for your help.

[@modjitsunan9945]

Thank you so much for this VDO

[@NFSDriver]

thank you so much, fixed my printer.

[@jeanettegarde3450]

Thank you so much. It worked!

[@CallMePinoy]

Thanks Bro BIG THanks!

[@leo5mg2000]

It works, thank you very much!

[@flamealchemist7327]

Thank you very much 😃

[@weiszelee6685]

Thank you so much for your video!

[@mahmoudaljammal3709]

Thank you

[@JustCallMeInsane]

method one worked omg you're a life saver!!

[@cressmk76]

You are awesome! Thanks so much, you saved my sanity!!

[@lucycostello5858]

Thanks this was really helpful

[@GailyaWatson]

Method 1 worked.... Thank you!!

[@tikigirl00]

Let me start by thanking Kevin, if it wasn't for him, I'd probably just buy another printer. I have an Epson WF 2660 and I ran through "method two", three times before it worked. This is the second time I've had to fix my firmware update for Epson. Just like Kevin said in another video regarding Epson firmware updates, DO NOT UPDATE YOUR FIRMWARE, nothing good can come out of it. I've learn my lesson for good now, no more updates. In fact, I will not install any of their software, I'll let Windows manager my printer instead, or try the chipless printing method (Kevin has another video on that, kzbin.info/www/bejne/m6qqhGp4o6-isNE. Thank you again for all you do, Kevin!

[@selmanerkaynak7811]

Hallo, I have a problem. I just bought an Epson xp 3200 series printer. I think I made a mistake during the installation process and now the printer is not working. The error is, there is Epson Device Recovery Mode Update Firmware written on the screen and I cannot do anything. What should I do? Can you help me?

[@ashkaash8144]

I got the Same problem. Did you solve it? Could you help me

[@kirabui5554]

Do you have similar solution for epson et3750? I would try anything.

[@sonnycorson7682]

Hi I've got an epson l555 ecotank that's stuck in recovery mode after there was a crash whilst the firmware was updating, it doesn't have the home key, is there another way? Epson are extremely unhelpful and basically told me to buy another, any help much appreciated

[@macncheesegaming8309]

Tried both methods, but nothing, it still is on recovery mode. My printer is a WF-2830 and need help ASAP.

[@calafeabra3727]

Is there any software for C-5710? None of the solutions work for this model

[@paulamarkgraf3096]

Kevin, I have the new Epson ET-4760 with ink tanks. It does not have an "orange" button on the front of the printer in order to do the "4-finger" second method you described. How do I fix this new printer stuck in Recovery Mode?

[@cuentaparaarchivos6918]

gracias amigo

[@mariacruz5085]

How about the Epson ET-2760 Printer...? Thank you

[@Rebecca-vc6iv]

Hey Kevin. I’m trying to use the second method now with my WF7720 but the computer can’t find the printer (connected by the same cord they were 10 mins ago which caused recovery mode incident). Is there any way to troubleshoot this? Screen on printer is showing ROM FIRMWARE UPDATE MODE FA07. Thank you in advance!!

[@jackiekin5672]

Hello ! Thank you for your method video , could you please tell me if it also works with Mac 10.13 ? I followed your methods but the printer shows DATA File is not found .

[@ildefonsoberrun1985]

Hi there! good afternoon, excuse me to reinstall the firmware of the Epson L6171 printer, do you follow the same steps? or is it another configuration? Thanks

[@morrisonfurniture1]

My man, thank you!!!!!

[@morrisonfurniture1]

Now the screen only says "Printer Mode" and will not connect. When I start back up using the method described, the screen says "Program Update" and will not budge. I just installed a new main board and feel like there is no programming on it...I was able to update the firmware though. Any thoughts?

[@Audrius9Ro]

what about L386 and other ecotank models ?

[@alex.b6419]

Any idea for L15150? Please help

[@CadiV]

Hello, I have a Epson Artisan 835. The unit will power on and start the startup sequence, however stops about 15 seconds into the start up and shuts down. The menu, display/crop, back button and home button flashes. I’m not sure what that means and was hoping you can help. Epson tech support was useless. Thank you.

[@jhoselinmamanimamani1777]

Thank you¡ you're the best

[@jessewilson9002]

i have a wf 2850 thats stuck in recovery mode and i cant find anything to do what you did here

[@d.angelsa5599]

buen video

[@makennacowan1218]

Very helpful

[@arcy9448]

hello, this does not work on my Epson L485, do you have solution, on this model? Thank you!

[@yilima]

Hey Kevin, I have WF 4740, and my printer is stuck on the boot screen. Firmware upgrade doesnt work and it doesnt have a reset button except the power button. are you familiar with how to fix this? is there a hard reset of the software on this printer somehow?

[@GilbertoFreyreCE]

Thanks.

[@marypoppins7099]

How do you get it Epson P600 out of inspection mode??

[@__LIN___]

Hey, Kevin what should be the problem if the recovery firmware doesn't recognize the machine connected to USB? My Epson ET 4750 is in printer inspection mode and the recovery firmware doesn't recognize it as connected. When I connect an another working ET 4750 via the same USB, the recovery firmware recognizes it and it appears as available for downgrade.

[@arthurmoehrke4414]

Hi Keven. Great vid. Do you have to combination for aan Epson ET 3700 thats stuck on Recovery Mode? Cheers Arthur

[@lzappa9109]

Fix for Epson ET4750 Power off. Hold down following buttons, Power, Home & place finger on top right of screen Power on. Hold until power light turns on. Release all buttons Screen should say ready for update. Connect USB A-B cable. Run Firmware update. Wait for 15 minutes. Printer might turn off or you will power down manually. Wait a few minutes. Turn printer on and undertake test print.

[@Дмитрий-б8е7ш]

Please advise. Epson XP3105. When turning on the printer, the screen says System error and at the bottom the code 302625. At the top there is a cross in a red circle and there is no error indication next to it. Cartridges are inserted. Paper is inserted. What could it be?

[@Linealtntrock]

Thank you!

[@pengai6926]

Hi,Kevin,do you have any idea how to fix the L4168 model pls?

[@BCHTechnologies]

What’s wrong with the printer?

[@siljeherstadhagen9432]

Thanks, it helped! :)

[@idliboy]

For Epson WF 645 - Press Stop, Left Arrow, Print Photo (Green), Power to get into recovery mode

[@cidneyvalentine9825]

For Epson ScF100?

[@MrKevnomi]

WF-3823 stuck in recovery mode. I don't have any of those buttons to the right of screen! Please help!

[@ksportraits3660]

i have a newer version of this printer i have no home or stop button what would i do then?

[@ZOPASALTHA]

can u help hang/stuck problem? no function button then hang all printer programme.why? this video like how can ill return to SCM FT mode to Normal mode by direct on? epson L4160

[@topoxcad7640]

I can't find firmware for pro wf c4810. You can help me?

[@pauladriaenssens]

Hello Mr Kevin! I have an Epson XP-3105 with the same problem and no way to access the printer for a firmware update. Is there a similar method as the second one in the video? Thanks for your reply.

[@Imran-wg2yq]

I have the same problem, too, so you can tell me how you did it?

[@pauladriaenssens]

@@Imran-wg2yq Tried several things I found on the web, combinations of buttons. None worked. Had to take it back to the seller for a reset. Seller put it through to the nearest Epson technical centre (Utrecht in the Netherlands in my case, some 200km from where I live). I asked to join a note about how to do it myself if ever the need arose. None arrived. The printer worked, but the first thing the display said was to update the firmware, so they hadn't done that at the service centre. I'm a bit reluctant to try doing it once more. So far for Epson goodwill ...

[@Imran-wg2yq]

@@pauladriaenssens thank you very much

[@pauladriaenssens]

@@Imran-wg2yq Well, sorry that wasn't very helpful, was it?

[@yeksbataan5267]

How about Epson L365 same problem? Thanks

[@mitkooskov2854]

My Epson WF-2660 printer is stuck in inspection mode after firmware update. Haw can I turn it off? Thank you!

[@paolacutillo641]

Hi Kevin could help me for EPSON FR-2510? on display shown "Printer Mode"....Thanks Advance

[@JPL19]

Not exactly applicable for my model - but - put me on the right track on the button sequences to get to a start up screen. Thought my ET-2760 might have been bricked after a failed firmware update - thank you !

[@trentmitche11]

What button sequence did you use? I have an ET-2750 that failed the update and is stuck. Cheers

[@JPL19]

@@trentmitche11 Hold power and home button down and for me brings up a menu with choices - #4 is "NORMAL MODE" gets me back to normal menu. BUT - seems every time I power off I have to do this. Also - despite unit showing on my network EPSON software refuses to see it. It is on network - can even access it via Chrome . .. Good Luck - hope you can fully solve it.

[@trentmitche11]

@@JPL19 Awesome! That got me a little closer I think. Same deal though, firmware software sees it but won't allow me to update it. If I get further I'll post back. Thanks!

[@jareemisthebest]

It didn’t work for me. I’ve done everything in the video though I have a WF-2860 but even when everything goes correctly when I turn it off and turn it back on it goes right back into recovery mode

[@NeeshaAhseen]

How did you fix yours

[@DadIsntMad]

is there a method 2 for ET-3750? please help

[@1natedoggy]

A friend of mine has the Epson L6570 printer and it is stuck on update mode but there are no firmware update files on Epson for this printer. Would you happen to know where he could download a firmware file to get out of this mode and fix his printer?

[@JonaShanG13]

Wao thanks brother

[@diegosoteloayala]

Hi! reset l475?? Thanks

[@henrykrantz935]

Is there any way to clear dish printers are has I have o x 97 and have cleaned and unclog the printhead throw away

[@henrykrantz935]

Thoroughly

[@jamesanthonyebarle4393]

it did not worked on my L565, ive waited for like 5 hours and still no signs of any progress, is there anything i can do to fix it?

[@danielromero6115]

Hi, I have an Epson xp 340, I got a recovery mode screen after a failure to update a firmware (accidentally the printer's power cord was pulled out while I was doing the update) after checking videos how to fix it, I got to the update mode screen and I could download the new firmware (Epson support webpage) Everything went ok, the printer screen showed that the download was complete, but went I turned off the printer and back on, the power button light is lit now, but the screen went black and nothing happens, what could be wrong now?

[@petergaiger1852]

This is exactly my issue and I can't find a solution. Anyone?

[@BCHTechnologies]

Did you see the firmware update is completed on the printer? It usually takes 5 to 15 minutes. Don’t shut down the printer before it is done.

[@danielromero6115]

@@BCHTechnologies Yes, I did, the printer screen said that the download was complete, and it showed too what kind of firmware was and some others details.

[@MtroLuis-cs7cm]

Genius! Thank you so much.

[@bryan3132]

can someone please HELP me!! both options don't work. the printer lcd keep saying ''ROM IS NOT WRITABLE'' when I try to install the software

[@Paradise4Nerds]

Did you ever figure out this issue? I ran into the same problem even after trying both methods.

[@IronDesigns813]

all you have to do is hit enter and it powers off not shut off the power

[@myyyv7884]

Hi! Help please. How to do the 2nd method in L5190? Also, for the 1st method, the firmware update is not appearing on my computer. I think the firmware update on my computer was completed but in the printer is not. 😭😭

[@joanimperial4251]

Hello Kevin can you help me regarding of this problem to my Printer. My Printer Epson ET-2760 is stuck for Printer Recovery mode how can I fix that ... please help .. thank you

[@maryhernandez3780]

Hello, I hope you can help me solve my problem, I tell you... I have an EPSON ecotank L4260, I have the application on my cell phone, when I want to scan as I regularly do, I open the application and it tells me that there is an update which I accept, and it tells me to turn off the printer, in the end it gives me a message that the update could not be carried out and a message appears on the printer screen

[@ngembuinvestments5834]

what about being stuck i recovery mode epson stylus photo px660

[@claudegirard8549]

Ok, printer works again !

[@Sacha10461]

I have a epson expression home xp-4100 and can't get it to go into special Firmware Update Mode. It keeps coming up I need ink which I know. Is this interfering with it?

[@ncochran01]

My printer is doing this, but isn't the same model. IT's a XP-7100. Touchscreen only. Only button is a power button. How do I fix that? Method 1 didn't work

[@cafran]

Hi! What can I do if my Epsonxp7100 is stucked in program update mode :(

[@johnwerner4925]

This was one last ditch effort to save my Epson WF-4640 from the dreaded Error Code 0x8a. If you research on the net you'll get it's a Windows 10 error, a piece of paper stuck somewhere in the path, corrupted firmware,, or who knows what. Well...I was using a Mac first off. I combed the innards with a fine tooth and no stuck paper, so that left corrupted firmware so I thought. I then download the up to date one and install with USB to which it says "Firmware Has Been Downgraded" and there was no way continue to upload the latest FW. That led me here and I used the method with the 4-buttons in the turning on process which then enabled me to load the latest FW successfully. I thought WOOHOO I'll bet this fixed the Epson. OF COURSE NOT...REMEMBER IT SAYS EPSON ON THE FRONT. EPSON PRINTERS HAVE LET ME DOWN FOR THE LAST TIME. MY WF-4640 IS AT THE ROAD AND TOMORROW IS TRASH DAY! GOT A NEW HP COLOR LASER. EPSON = POS.

[@ibrahimgezen5918]

Hi.my printer Epson wf pro c5790. My printer have fatal error 031004.can you help me ?what should I do ? Thanks

[@youknowthisbruhhh]

hey hi my printer stuck on printer mode model is l565 can you please help with this