Revealed: Easy Trick to Keep Epson L1800 Printheads Clean and Unclogged for DTF

If your Epson L1800 printer is struggling to keep its printheads clean and unclogged, then this easy trick is for you! In this video, we're going to show you a quick and easy way to keep your Epson L1800 printheads clean and unclogged - without any expensive repairs! By following this simple guide, you'll be able to keep your printer functioning at its best for years to come! We will post the link to the whole KZbin video in the comment section.
For other helpful videos, go to / bchtechnologies
For printer repair:
🢡 Visit us: BCH Technologies, 506 Radar Road, Suite B, Greensboro, NC 27410.
🢡 Send the printer for repair! bchtechnologies.com/printer-r... Yes! We repair DTF, DTG, and sublimation printers too!
🢡 Donate your printer to us! Contact [e-mail]
More support options for your printer device are available at support.bchtechnologies.com
Continue the Conversation: [e-mail]
FACEBOOK: / bchtechnologies
TWITTER: / bchtechnologies
INSTAGRAM: / kevinatbch
LINKEDIN: / bchtechnologies
TIKTOK: / kevinsinknmore
SHOP NOW: bchtechnologies.com
About BCH: BCH Technologies is an innovative company focusing on ink and related products. Founded in 2011, the company transforms how people and businesses refill their printers through innovative technology solutions. Our core purpose guides the research direction of 1) preventing land waste and 2) bringing customers better products with lower costs. Every day, over one million ink cartridges are thrown into landfills worldwide. The company has focused on working with businesses of different sizes, from Fortune 500 companies to entrepreneurial starters, to develop custom ink, spanning from printer ink to stamp ink, re-entry ink, indelible ink, redaction ink, invisible ink, and more.
This video was produced by Kevin at BCHTechnologies.com.

[@richardgrotz8089]

Fantastic cleaning guide, thanks Kevin! Richard Bulk Ink SA

[@jjay7082]

Thanks for sharing the info, learnt something else new. Respect

[@BCHTechnologies]

Glad you got something out of it! Thanks for stoppin' by and checkin' out the vid.

[@tubeinfoful]

Very good ideals of performance thanks for your support

[@BCHTechnologies]

Always welcome

[@cyspawn23]

Amazing info

[@BCHTechnologies]

Glad you think so!

[@Trendzya]

All good information 👍 I just have little questions I am loss every time after completing around 400 miter ( 12" roll) After all talking care and maintenence. Du you have any suggestions please.

[@giorgitrapaidze469]

Thank you for the video,were can we find protective cover ?

[@samanthalock7090]

Kevin I have an xp-15000 can you take a printhead apart like you have shown in this clip. Or any suggestions on how to clear it.

[@zeroschr5483]

Thx

[@blasterfelix85]

Hello, a question so to clean an epson et2721 printer head in the ultrasonic tank I can't immerse it all? Or are there gaskets that would break? What temperature can it be set at?

[@jordanlotus188]

Very helpful Thanks

[@thepiratebayiso]

Good evening from Riyadh, KSA. I need to check if I have everything I need to unclog my Epson L1800 DTF. Syringe .41mm, DTF Premium Cleansol, Needle .2mm and drill bits .5mm.. Before I check out. Thank you and I'll wait.

[@stamposetogr8441]

when I do the daily check of the nozzles and cleaning of the head, I see that some of the white lines have been replaced by black lines, also sometimes the dumpers of the white have a dark color inside, I changed a new head, a new dumper and the capping station pump is fine, for a year I had no problem

[@rildolima9614]

friend good night what is the name of this glue that you use to glue the front plate of the print head

[@JonVarbero]

Some Epson print heads have a rubber seal. When reassembling do you need to apply any lubricant/grease on the edges of the rubber seal in order to create a proper seal?

[@Addieandabe]

when doing a nozzle check. Both my white columns half the middle half of them missing. Any idea how to fix it?

[@neeraj00875]

please give the link for the print head cover

[@jessedean2435]

Kevin would A bad print head or A completely clogged print head cause completely blank copy? Can you please tell me besides A clogged print head what else would cause A blank copy? Thanks

[@leksessongz8867]

Great video Kevin. My print head leaks under the nozzle plate instead of passing through the tiny holes when I do manual flashing. How can I solve this problem?

[@80sbaybe_inc]

Might have to buy a new print did you buy in off of Amazon

[@QertasStationery]

my printer 1.8m nozzel is clear but not printing, although the head is moving and geving code 000028, give your suggestion, please

[@zakyyusuf5896]

Ok.mantap

[@BCHTechnologies]

Thank you for subscribing to my channel.

[@enkhtsetsegivansan1458]

hi epson l1800 colors have problems help

[@dannytorres8326]

Thank you for the video, it helped me unclog my dx5 manifold. I have an issue with the printhead now. I've left the printhead soaking in piezoflush but one channel doesn't allow me to suction fluid. What do you suggest I do for that channel? I used the small drill bit and syringe. Printer sat for 2 years or more. Thank you in advance, anyone.

[@prckata]

did you resolve a problem?

[@dannytorres8326]

@@prckata I managed to unblock the heads but when I went to reinstall. I burned out the head. Ended up scraping it

[@prckata]

@@dannytorres8326 🥲

[@justintietz4477]

Can you show the process of removing the gold plate and replacing it. My clog was at the gold plate and could not be fix till I removed. But now I cannot find how to get a replacement plate for the l1800 and how to put it back on as it seems you need to glue it back on?

[@liveizpublike]

Hey, did you find a solution for this

[@justintietz4477]

@@liveizpublike there isnt unless you can afford 100k machine

[@liveizpublike]

So I can't glue the tile back on? I need to replace the printhead?

[@justintietz4477]

@@liveizpublike yuuup

[@madmedia3380]

If the printhead cable or motherboard is burned/damaged, will the printer still function? what I mean is will it still try to print or with it simply show an error and not function at all? I can still send print jobs on my machine but very little to no ink comes out and the nozzle check prints no lines.

[@jjay7082]

Wouldn’t work at all if the motherboard has gone.

[@madmedia3380]

@@jjay7082 thanks 👍

[@northeastfire4188]

I am very new in this topic and actually i was looking for head cleaning tips i have bought 2nd hand l1800 Epson printer to start a small business i want to use it for sublimation ink and the seller previously using there was normal epson ink so I don’t have technician around me can u suggest me

[@BCHTechnologies]

Thanks for subscribing to my channel. If the previous ink is regular Epson ink, there shouldn't be too much to do. You can use regular cleaning solution (or just distilled water) with Epson's self cleaning function, it should remove 90% of clogs.

[@zamball23]

I did this and now my printer won't turn on. Its an Epson L1800. Back power powers up the printer however the front button does not come on. I get an error 0e0 from the LED panel. It's a DTF printer. The first initial boot the print head moved and then it powered off. Now it wont move or power on.

[@adellcampbell2320]

Hi Kevin I have an Epson xp 15000 and the 000104 error code is showing I can’t find out what this means. Can you help me solve this Thanks in advance

[@whatstheteemorebyrocexpres3047]

Ink maintenance box needs to be changed

[@adellcampbell2320]

Thanks for your help

[@amitroy42]

sir good evening epson l805 printhead top plate which bond to stick and where to buy please

[@djgrandauto8541]

I did it all and when I run a print command it just does a head clean. Try nozzle and it just does a head clean. Is it software issue?

[@jjay7082]

More than likely you’ve reinstalled the Print Head incorrectly. Remove the power cord, double check that the Print Head control cable strip is pushed in correctly, both pins.

[@djgrandauto8541]

@@jjay7082 for sure. I checked numerous times. I noticed that when it would go to the spit station it would make a sound like disconnecting a usb from a computer. I checked the contacts. I know the ribbon appears to only go a certain way. Blue side down on top ribbon blue side up on bottom ribbon

[@djgrandauto8541]

@@jjay7082 I’ve seen a lot of your other videos and will diagnose the mother board. I can turn on the printer and my wims works. So power supply has to be good. Got to be a fuse near the heat sink. It no longer recognizes the usb. I hit the reset button. My board is the c655 mf

[@christiancastillo1778]

Him: don't do it at home Me: doing it anyway 😅

[@BCHTechnologies]

You got it!

[@pongkie25]

Im 100% sure his head was dead lol

[@user-EzbonMureithi]

Anybody here from philippine to connect to an electronic shop selling micro bonder glue please. The seller should be able to sell to international market.

[@leksmedina7062]

Yun po ba yung pandikit ng plate tyaka nung mismong head?

[@user-EzbonMureithi]

@@leksmedina7062 yes bro. Are you from phillipines?

[@cgrafficor]

"I must warn you.. Don´t do this!!" I agree!!

[@HijackedBell]

Do you fix clogged printheads?

[@BCHTechnologies]

Sorry, we don't.

[@haroldlee6143]

you destroyed your printhead that's why you didn't video the results

[@mothmoiloa]

😂😂😂

[@blackmustang5493]

Don't use needle for it! I did it and all I can do is put printhead to the bin. after using needle it sucks air instead of ink

[@myheartsoulcreations1624]

I did this and know I'm getting a fatal error...omg

[@Him-Sar]

why am i smelling thinner while watching the video at home...