Canon Printer Cartridges - How to Disable Ink Tracking Chip & Turn off Ink Monitor

[@BillyAu]

Thanks for the info. It's very important to make sure your cartridge is filled up with ink, and sometimes it takes a day to settle after filling it. I have had no printing because not enough ink and trap air in the cartridge, that prints after a night of sitting in the machine.

[@Picklebeanz]

Totally worked! Printer is printing again! Thank you! 😊

[@lefthandedluke]

One person that works for Canon didn't like this.........I did !!

[@christophertadeo6120]

At least he's honest that canon always want to make me buy new cartridges... 😁

[@yvettemonique4330]

Thank you for the video

[@chrisantonio7360]

Thank you so much if you didn't tell me I will waste all of my ink refilling the cartridge thinking there is problem in my cartridge and it was so simple to just press the f* stop button for 6 seconds i thought i was done for thank you for your lovely lovely video and I really appreciate your work

[@gracieq.7046]

thank you so much!!! this is the only vid that helped me!

[@nurettinsaiad2270]

Thank You very Much. You are really life and Ink Saver 😂😊😊

[@mohamadsatouf3104]

Very many thanks. your Tips helped me a lot. You are such a smart U tuber!☺

[@zhimomisumi873]

Very helpful information, one irritating problem solved. thanks subscribed

[@BCHTechnologies]

I'm so glad to hear that the information was helpful for you! Thanks for subscribing, and feel free to reach out if you have any more questions!

[@Robert-lo6uf]

Worked for me thank you!

[@dimitra3326]

thank you thank you thank you! its so easy, just one botton!! respect!

[@cleanhouse9512]

This is genius thank you 🙏🏻

[@szylvyamolnar]

This is perfect 🥰 💞 Than You! You have made my day! Ah! Many thanks again 🙏

[@keijones63095]

Thank you I needed this !!!!

[@dennissmith6022]

Thanks

[@Playtrack22]

Salamat poh it’s mean Thank you very much for the tip now I can refill and bypass stupid error.

[@BCHTechnologies]

You are welcome!

[@christianjayfortuno2150]

😂😂😂😂😂ohhhmy geezz , hahahaha thats just savage 😂😂😂😆😆 "if you dont want to see that yellow flashing loght , put a duct tape on it!" Ohh im dying😂😂😂😂😂😂

[@BCHTechnologies]

Right? Who knew duct tape could solve all of life's problems, including printer drama? 😂

[@goldy2210]

Thank you!

[@BCHTechnologies]

You're welcome!

[@jackflash5659]

"the LED light will be flashing yellow from now on. If don't like to see it, put duct tape over it. ROFLMAO!!!!🤣😂

[@aaftabluhar8890]

I have canon Pixma e560 printer. When colour ink cartridge running low I filled it. But still printer shows it running low!! What should I do sir??

[@Punjabibooksnapshots]

Same here, did you fix it ?

[@aaftabluhar8890]

@@Punjabibooksnapshots no.

[@amitminj4100]

Clean the contact point of catrige with cotton and contact cleaner or nail polish remover with cotton If not resolve try to press stop button for 2-3 minutes

[@yaseralbahli531]

@@amitminj4100 How can I stop the continuous light in the printer that indicates ink eperssion?

[@amitminj4100]

@@yaseralbahli531let the continuous light glow and try those procedures to reset and let the printer print.

[@nosynikki]

Thank you so much 🥰❤️🥰❤️

[@BCHTechnologies]

You’re welcome 😊

[@AhmedMohamed-cr7ry]

hi i have printer canon pixma mp 250 and the color ink catridge is broken but i still have the black one how can i use it ?thancks.

[@iamyourmuse]

Does this also work for a Pixma Canon 3522? It's very similar to this one as it looks like the same buttons on it.

[@BCHTechnologies]

Yes, the method should work for the Pixma Canon 3522 as well! Just make sure to follow the steps carefully, and let me know how it goes.

[@iamyourmuse]

I use to have an older Canon printer that all I had to do is click print anyway and it would continue to warn me I'd run out of ink but didn't totally cancel out the cartridge as empty and not print, surely there's a way to turn off the printer chip from keeping it from printing even though it thinks the cartridge is empty or low on ink. I know they've made it this way cuz they want you to buy more cartridges but it's insane the cost of cartridges and if you do alot of printing like I do, I learned early on years ago how to refill them but always had to tell the printer to print anyway and it's annoying, there's gotta be some way, a software thing or something that can cancel out the chip memory of the empty cartridges on these printers. I had looked into the printer with the wells that you fill and don't need cartridges but then I see in reviews that they don't last very long, some part in them goes bad on the tubes that send the ink to the paper and there is no replacement of that part....kinda shady crappy stuff is that when you think you are getting a printer you no longer have to buy cartridges for but then guess what, you won't be using it long and can't fix it either...so they get you everytime.

[@BCHTechnologies]

I totally understand your frustration with the ink tracking chip! It does feel like a strategy to push us into buying more cartridges. Unfortunately, there are limitations with certain models, but I hope some of the tips in the video help you find a workaround!

[@Devo1987]

How do i trick the canon ts3522 that the ink cartridge is new i have refilled mine

[@freemanfornow264]

Did you ever figure out? I'm dealing with this now

[@maicajapanmoments]

My printer worked with refill cartridges bought from Amazon but I made the mistake of “cleaning” my cartridge and I think that made my printer detect my cartridge isn’t genuine. Help pls

[@RobloxKing-we2np]

Oh same here i manually refilled mine and it said non genuine ink cartilage I just ignored it untill it wouldn't let me print anymore and then I just got a notification from hp saying "your hp cartilage seems to be non-genuine" and it asked me if it was non-genuine or not and I said it was genuine and it forgave me color cartilage but not my black cartilage that brother goneeee

[@craigywild]

Hi. Is there a way to use a Canon cartridge that is exactly the same size, fits in the cartridge slot but the has a different part number. Thx

[@tedblackburn8679]

What kind of ink do you use? Any kind? What about "leather dye"? 🤨

[@TheKweenOfKings]

so does this work for the 275 276 cartrige models?

[@Geographer499]

how to solve low tonner error after refill..canon 6330k

[@gimgimw]

Hi Any suggestions? The advice in the video is not working for my Canon TS3160. Thank you

[@minhcao7843]

No joke it worked. When the error popped up, press and hold the stop button for 5 second and let go. Restart print and walaa

[@zakdelarocha]

TNX bro!

[@acmeclasher4142]

where can i buy this cartirege

[@BCHTechnologies]

We don't have old cartridges for 745 (Asian Pacific model) in the US. Therefore, you need to buy a cover and do it yourself: www.bchtechnologies.com/accessories/refill-tools.html

[@eddieeddie8216]

Thx

[@BCHTechnologies]

Any time

[@TanakaNdhlovu]

Help me with the 5B00 error please

[@brianlacy8870]

My TR4522 refuses to print tho I've refilled the ink and it did print fine with the new ink for about 15 copies ... I've taken the cartridge out then back in. Tried the stop button method for 5 seconds. Any other tips? O ram I forced to buy cartridges? Thanks!

[@olaholvik6510]

thnaks

[@BCHTechnologies]

You are welcome!

[@khalidhanoudi]

Please how can cancel the printer flashing error of empty catridges

[@centrureparatii3409]

Superb :))

[@sayanimondal346]

It works for some day but after printing approx. 100 pages it says that the cartridge chip is damaged/it is not the original cartidge

[@gabriel_13the]

Did you manage to find any chip resetter?

[@Nghongan85]

help me reset ink level canon e470

[@dinhhuynh7595]

Help me! It didn't work with my canon mp270. I did as u said and nothing happened

[@gkthailighting2951]

MG5470 to fault code 1410 but i change all Printhead , Cartridges master but problem to same fault ,How i repair?

[@pedroalejandroorozcoloza6621]

Why my non genuine color ink cartridges not working

[@Just-one-Nalee]

My printer won’t let me print with after market ink how do I override

[@erinasatre4785]

Same here

[@LauryDepp]

hey, I have the same printer I bought it like 2 years ago..I paid 50 dollars for it! Same money for the cartridges now! A total rip-off. The point is , your trick about the " pressing the button 20 seconds,,... is not working in this one.

[@ifwgames]

Please tell me how we can solve zigzag printing

[@BCHTechnologies]

Here it is: kzbin.info/www/bejne/nWPQY59-ZtR7r80

[@johnston.scott64]

I had a thought. And I have a lot of experience with a lot of electronics, chemicals, processing of chemicals, the aerospace industry was very good to me. So I wonder semicolon do I really need the sponge inside of the cartridge or can I get away with something more coarse? The sponges that are used in a typical ink cartridge, I'm sure they were well researched by the manufacturers. And this is probably their idea of the optimal way to design a cartridge. But I wonder if they didn't do it for the point of view of trying to sell more cartridges? You know consumables. I kind of wonder if you can get away with basically anything from a cotton ball to a sink sponge? Or maybe just a piece of paper towel? My understanding of electronics is pretty advanced I never had to actually investigate in depth how inkjet printers work. My basic understanding is simple, it's an electric charge it's super heats the fluid and forces it to eject on the paper. But where does it care where it gets a source of liquid? If the only place that really matters is how much liquid is in the heated area when the inkjet sends the command to heat that heated area, theoretically you could just have a tube feeding this printer. Now nobody wants to set up an IV system for their printer, but I'm wondering if you can't just tear the lid out throw a cotton ball in there dump the ink in and let the cartridge ink projection system do the rest of the work. You know this is something I think I'm going to try because I have an extra printer around. I'm about to throw out in a couple of cartridges. It might be an interesting little experiment.

[@hansdegroot652]

aerospace industry was very good to me. lol you are going to take the airbrush art to a new level?

[@hansdegroot652]

or cloud printing?

[@Z-Ack]

I never understood the black magic photo printers have and somehow turn those 5 colors into everything with three little tiny lines.. like how do they know how much, when, where to distribute the ink on the paper and have it dry in milliseconds spitting out whole hd photos in seconds.. like where on that little cartridge or “jet” is the brain to make it take 1’s and 0’s then convert it to a hd crisp picture of some tits or something?!? Or how and who first figured out how to melt silica and get it to perfectly form a group of switches that can still mechanically move to switch with minute impulses all within an area of a few microns.. now they can do the shit where a single transistor is 2 nanometers meaning its so small even bacteria cant fit in between the ridges of the switch design.. like what devil did you let fuck your butthole to give you these powers?!? I mean try micro soldering on a smart phone motherboard., theres chips so tiny you cant see them with your eyes and a small breath can blow them away gone forever.. they can legitimately manufacture autonomous robots so small that they could simply land on your face and walk right inside the pores on your skin, walk right in to your blood vessels without puncturing the walls and go chill in your brain with the neurons and receptors to make you feel the best and be the smartest youve ever been as well as strongest.. fuckin beyond my mind..

[@SianaGearz]

People do set up IV systems for their printer - this is called CISS Continuous Ink Supply System, you can just buy retrofit kits. You can also get printers that have CISS from the manufacturer, for example EPSON EcoTank, the prices aren't even particularly shocking, though of course higher than loss leader printers. I mean this is a precision high manufacturing complexity device, any printer, and by all reason, printers under 200 dollars plain shouldn't exist, but they do and they cheat their way to profitability. The sponge is needed. If you just dump the liquid on top of the nozzle inner structure, the print head will leak the ink through the nozzles. The sponge suspends the liquid by capillary action and regulates pressure. Do not use fibrous material (paper, cotton) as a replacement, as the fibre will detach and swiftly clog the nozzles irreversibly. Replacement high capacity sponges exist, they have larger dimensions and possibly higher density, and with some luck you might find a suitable bulk material on your own as well. Not celluloid sponge. Dubious about kitchen sponge, the material is a random mixture low purity and low endurance. Remember inkjets are very sensitive devices that don't respond kindly to any particles, dust, contamination, dissolved solids that can precipitate out. Remembering how finicky colour photo inkjets with micro droplets were in the mid late 90s, i'm shocked the current devices with even finer nozzles work as well as they appear to. Your thinking that the sponge is an impediment to getting more ink in, is incorrect, the sponge wall structure only takes up a few percent of the chamber volume. Before every manufacturer settled on using sponges, there were experiments with spectacularly complex other solutions. They didn't work well at all. Yes the lid of the cartridge is sonic welded on but it can be cracked off for the purpose of replacing the sponge.

[@ronaldmaier6632]

Hi mates, can You help me? how can i solve the error message "supportcode 7700" at canon TR4651 ?

[@lisarobertson4485]

I want to do a lot of printing.

[@Militaryshortsrandom]

How to refill ink without having reseting it again again

[@michaelcatalino3717]

Set up Bluetooth on PIXMA MG3220

[@millspoolcare4469]

I would be open to product beta testing I own a swimming pool company and print documents and Contract all day long

[@yousfirihab9892]

I am using refilled ink cartridges with a canon printer and when i try to disable the ink detection feature using the stop button it won't work smoothly it takes a day and a half so that the printer gets back to work regularly. Do you have any tips that can help? Thanks in advance

[@christojoseph2476]

What do you mean?

[@kashigiri6624]

Canon printer ka jo bhi videos banate h . Language hindi hona chahiye tabhi to samajhme aayega. Aap videos me jo bolte h to samajhme nhi aata h.

[@Sir-Cebz]

Thank you so much, I almost three my ink away thinking that it doesn't work for my canon Printer

[@hansdegroot652]

ol. i never buy canon again. they are pure maffisa my ink isfull i even bought a new cardtridgethuis it way too complicatewd i never had this rubbisch with hp. it feelslike blackmail.

[@macmanjimmy69]

when is it best to start refilling the cartridge 1/4 remaining ?

[@BCHTechnologies]

Yes. Or, fill it up regularly, by recording how many pages printed.

[@Cent1796]

Thank you !!!

[@BCHTechnologies]

You're welcome!

[@Caguidance]

what to do if my ink catridge is showing error due to copper strip,

[@Bali_Evie_Buns]

Thank you!!😊