100HP Worlds Fastest RC Car Project on Drag Strip

🚗Win one of my cars raffall.com/kevin_talbot
Come to Santa Pod - santapod.co.uk/
Get Car Here amzn.to/3GNSGCZ
Scorched Parts scorchedparts.co.uk/collectio...
Perfect Pass Parts amzn.to/43w0IKt
M2C 6 Lug wheel Hex badtouchbreakers.com/products...
ONYX Lipos onyxrcpowersystems.co.uk/
Tires - / gone-bananas-racing-sk...
Motors
ESC -
Body deltaplastikusa.com/collectio...
Tires profile.php?...
Servo - amzn.to/3oE2pWy
GPM Wing Support www.gpmparts.com/arrma-infrac...
This is my fun channel, you'll find everything hobby related, rc cars, monster trucks, supercars, destruction and a bit of business stuff :) Most videos are RC Cars, business, Amazon FBA, eBay, Monster truck, Cars, insurance, cryptocurrency and other topics.
subscribe!!
#Kevintalbot #rccars #rc

[@KevinTalbotTV]

🚗Win one of my cars raffall.com/kevin_talbot

[@benistingray6097]

Everybody should at least once in their lifetime see topfuel dragsters live, such an impressive experience! The power of the sound and shockwaves is something else and the technical aspects are absolutly crazy aswell! By the end of the run they completly melted their glowplugs and they are essentialy dieseling/its a runaway to the end of the run until fuel gets cut off, completly mindblowing :)

[@volvo09]

I can't imagine being RIGHT next to 2 at the starting line! They shake you from the top of the stands!

[@rickietatum4319]

Top fuel is awesome, the noise, the fumes, the vibration is just mental for us spectators, God knows what it's like for the driver.

[@nordic5490]

Note, turbos and 4v dohc is banned in top fuel. They could be much faster, but... many tracks in the us are too short now, even @ the shortened 1000', and the NHRA does not want them to go faster. If modern engine configuration was used, tf would be much faster.

[@chadthunderstroke]

YES! The shockwave!

[@mabeline.13]

I say this to as many people as possible!

[@lucidity7532]

the fact that an RC CAR can have MORE HORSEPOWER THAN SOME SMALL CARS is absolute insanity

[@fuzzyturtlez8994]

Yup. Buying a Suzuki Cappuccino soon. Just saved up about enough for it so i'm going to be checking out some auctions. 63hp at 1550lbs.

[@Tminus89]

Indeed, my last stationwagon before my current one had 100hp 😆

[@jasonbirch1182]

My current daily is a 72 220d with 59 hp.

[@worldwolf9909]

Maybe he can use it as a skateboard..

[@martijnvkk]

Isn't the same

[@pagravel90]

If you want to try aluminum wheels, have the surface of the aluminum prepared with a knurling tool at the machine shop. However, I think I have a better idea. At work, we use a lot of urethane and epoxy for casting, and they are quite impressive. You could have an aluminum wheel machined with channels through the diameter of the wheels, then cast urethane around the wheel. This way, the tire would be mechanically locked to the wheel.

[@Matt-xy6cf]

He wont respond to logics like this , dude is not to bright with physics .

[@user-xl3mw7zt1c]

So what if he isn’t into that he probably knows stuff about rc’s than you ever will

[@Maximum_777]

I get the feeling you're going to run into ballooning issues there, and I think, especially with how often the current tires are being completely destroyed, it's not going to be cost effective, I think the current technology needs to be refined and I think we need to stick with plastic wheels but design them so that their structure accounts for the crazy forces that their experiencing.

[@Barbari100]

How about aluminum wheels with spikes? Milled from solid

[@Barbari100]

Very short spikes, so that he only gets good grip

[@codem0de]

Top fuel is no joke. Those things are controlled explosions down a 1/4 mile. The first time I heard one my hands couldn't cover my ears fast enough. Power!

[@zachrogers9418]

We need on-board footage of these speed runs. It would be epic! Also a good way for research on what all the components are going through at these speeds

[@superfeschi]

Exactly my thoughts. Put 2 cameras under the body to monitor driveshafts and diffs

[@lekkerding0908]

Hé can.. better drive also with a fr

[@saransmith8773]

​@@superfeschiRaz Schifrin does exactly that to test parts

[@larrysutton6530]

​@saransmith8773 that just proves what a good idea it is.

[@UN-intelligent]

Insta 360 is small and clear enough yo do it now. Camera technology has definitely gotten better since gopro came out. You couldn't fit those in small spaces.

[@brendancornwell6923]

Maybe the diff blow was due to the sticky part of the road, all that 100hp was put through the diff as the wheels were locked to the road from the sticky road, maybe usually the wheels spin up a bit on normal tarmac and takes strain off the diff. love the vids!

[@byrondinkelmann8506]

Yea I agree, far too much traction for the drivetrain to handle with all that power. Rolling start for next time Kev :)

[@grzegorzgawron9538]

I am almost 100% sure that the problem was too much traction, all the power suddenly went to the drive shaft which simply couldn't handle it. Under normal conditions, the wheels would spin and the power from the engines would be distributed. It's one thing to withstand the power transmission at high speed, and another thing to withstand the power at the start, especially from the electric motor which provides full torque from the very beginning. The cause of the car jumping is also too much grip, this is what a wheel behaves when it has too much grip.

[@Lee.gRC27]

I'm glad you are at the pod and giving it the recognition it deserves, if you live in the UK and you have never been, i 100 % recommend it, it's 100 % family orientated, it's an experience you'll never forget, just don't forget your ear defenders,

[@That.red.seat1]

Do forget ear defenders, it’s loud but that’s the experience

[@Flodis]

Loved the ride with Terry. He sure manages to keep a loose relation between the 'front of the car' and 'direction the car is traveling'. And all during a friendly chat. Impressive.

[@cgwworldministries83]

Here in the states we use aluminium rims with proper (albeit tiny) steel belt tyres. They are filled with foam but its the only way to keep things from exploding like that.

[@DavidGarland-ur5ld]

I have always loved drag racing, I grew up around it. I even travelled with NHRA for about 5 years. And I will never stop loving drag racing.

[@edbodell6912]

My suggestion if you are going to try a special wheel is to go to a skateboard wheel manufacturer and see if they will help you. They make hard to soft compound wheels and everything in between. I would think that a solid compound wheel would solve your problem of the rubber de laminating and the rim failing. Won't hurt to try good luck

[@JasonHenderson]

Except skateboards are not driven by a motor. They just coast.

[@davidskala7652]

Its 420am here in New York and kev drops a video, great stuff can't wait to how it goes. much love and respect brother!

[@freedom8480]

Yeah, it is always 420 somewhere😆

[@Kirk_Wood]

​@@freedom8480Sounds good but you must be high if you believe that true. 😂

[@peteroman4297]

I’m here in New York too but it’s not 4:20am for me, it’s 4:45am for me.🤷🏻‍♂️😊

[@davidskala7652]

​@@peteroman4297true it's not 420 anymore, unfortunately it was only 420 for about a minute when I typed my comment lol 😂

[@gillyboyNY]

Yup, ny here too. Had to see it before sleep 😂

[@robertrodriguez5558]

Been watching this project since the start. Hope you get a record! Good luck Kev!

[@cindyshields5753]

Watching Kev Learn the spirit of Drag Racing and Loving it! I actually drag race too! And its a blast to go 160mph at 4s in the 1/8mile

[@viewer02435]

Hey, One way to solve the problem with the exploding tires would be to increase their diameter. The centrifugal force that lets them explode decreases exponentially with increasing size (at the same speed of the car!!). In other words, the tires would tend to explode way, way less by increasing their diameter by only a small amount, even if the car is driving at the same speed. And the smaller the tire, the bigger the gain with small changes, so it's especially applicable to the rc world. Decreasing the mass of the tire would decrease the centrifugal force too, but changing the diameter has a bigger impact (because of squared values in the formulas). Of course, the gearing would have to change according to the new tire size.

[@snapped4433]

My uncles got a 1500-2000hp suppercharged outlaw car. It's awesome only thing is the motors don't stay together. 😂 fastest she has ran is a 6.90 on the "big engine" winsor and runs 7.36's with the clevo. I absolutely love working on it. Hasn't been together for 7 months becuse we have been waiting on piston sleeves and after that pistons then measure gaps and put it together

[@kasperhansen4310]

Would love to see some data logging on the normal tarmac vs the sticky tarmac on the drag strip!!! Thinking the amps and voltage drop will be massively higher on the drag strip⚠️⚡️🪫🔥 Kev please make some testing on it🙏🏻 Would really love to se how much more the setups sweat on that strip!! Thanks for the video😊

[@kyleteal5888]

Carbon fiber or aluminum. You must drill holes under the rubber. So when you pour/mold the rubber it will make a rivet. A physical lock instead of a glue. Through the rim to the inside by the webbing. Bloodhound (SSC) or (LSR) and the Thrust car had to do it.

[@tieofdnfk8017]

it's crazy how much power those drag cars make

[@volvo09]

I think you are pretty on point at what happened when you lost drive. The dragstrip is so sticky that when the car hopped it sent massive shocks through the drive line every time the car landed. It's amazing that a dragstrip is still not smooth enough for a perfect top speed run! They feel like glass in a car!

[@shize9ine]

Kev, I was thinking you guys should run mini drag chutes. Would save everyone!

[@stevenhuerta1975]

I have literally got all my cars because of your videos and how you show durability. Cheers and keep it real man

[@GaminGit]

Another absolutely stonking video Kev! Really loving the direction this channel is going, my eyes were glued to the screen the entire time!

[@KevinTalbotTV]

Thanks fro glad you enjoyed it

[@deeznuttts7271]

@@KevinTalbotTVwhy don’t you glue ur tires

[@haydenkatz8239]

I would try aluminium wheels with perforations on the road surface, then set into a mold allowing the foam to pass through the perforations from the road surface into the inside of the rim. Would be difficult to setup, but once done the foam no longer needs to be bonded to the wheel.

[@Orf45]

I am not sure if anyone else has covered this in the comments....but I have watched hundreds of drag racing videos from Santapod. That track as wonderful as it is for full-size cars has a fine 'washboard' surface undulation in the prepped section. I have noticed it many times when watching short wheelbase drag cars, such as Karts with bike motors. They hop about fiercely. In your video, at 21:18 you can see that washboard quite clearly. Great videos. Great fun. Please keep up the super work.

[@user-gk9ey2jk6c]

Hi Kevin if you would increase tier radius the centripetal forces in the wheel drum would decrease, (f=m(v^2)/r). Maybe line the periphery of the rotating surface with uni directional carbon fiber band and epoxi and then put on the foam / rubber. Great content by the way.

[@globyboulga1045]

Exactly

[@sheiladavis2304]

I think that glued section of the quarter mile is the car killer. I would run them from the other end of the track and use the glued section as part of the breaking area. Also that wind was like gale force it’s too bad the driving conditions weren’t a bit better. I think that must have been filmed in the summer right?

[@KevinTalbotTV]

Filmed about 2 weeks ago. Can’t run the other way we might hit the building

[@wyldcardsam]

They do run drag rc cars on prepped surfaces

[@jockmason5922]

​@@wyldcardsamare they as sticky as Santa Pod is. We did a human powered race their at bugjam. And it was very difficult to cycle on the sticky bit

[@volvo09]

It's a good thing they didn't go the opposite way! 2 cars already overran the track... they would have hit the building and not been invited back. Think about when these cars blow out the tires before hitting the prepped surface... Better to hit dirt than a building / flat wall.

[@Fizzure3000]

I know very little about RC cars but seeing how the wheels are like a "sponge" material I feel like the glue just rips the tyres off their rims, it's just too sticky.

[@TheRealBustinOne]

If you scuff the aluminum pretty good I bet you could get a good bond. The biggest problem seems to be the foam needs tweaked to be stronger or more dense. Hopefully a rc tire company will come up with a better high-speed compound

[@hi_tech_reptiles]

I watch a ton of car content, so its fun to watch ya have a blast inside the stunt cars and stuff. Imagine drifting like that but at 70mph downhill lol!

[@jamesazbill1864]

That was sooo badass either way!!! The fact that you can build that like that is amazing to me!!!! I have a success Arrma Kraton, a Vee five and I think I’m awesome because I can kind of work on it! 🤣🤣

[@wiresmith2398]

Kevin's gonna end up building his own drag car to park next to the monster truck, I just know it.

[@DetoursRC]

Great video. Soo cool you guys got to run there at santa pod. Hated seeing all of the carnage though. Im a speed runner myself soo I know how crashes can be heartbreaking. My PB is 155mph soo far with an open wheel Limitless and 2028 1700kv w/ xlx2. Its all Scorched out too! Awesome parts!

[@KevinTalbotTV]

thats epic for open wheel!

[@DetoursRC]

@@KevinTalbotTV thanks man. Those 2028 1700s are no joke. Kinda hooked on speed running now. Im gonna turn my infraction into a GT speed car. A hobao is on my list too!

[@tarrman]

Been there in May watching them, they really have to be seen to be appreciated. They actually register about 2.4 on the earthquake ricter scale! Awesome spot to get behind the Xmas tree too, top stuff 👍

[@wags9777]

Unless your front and rear wheels are spinning at exactly the same speed you are going to hop on a surface that is super sticky. I'll bet that the single engine rear wheel drive cars didn't hop as much.

[@billbenedict4664]

Love the video Kev! A couple observations... Your car definitely looks too heavy for plastic wheels at those speeds and loads. Carbon fiber or aluminum wheels do sound in order. Perhaps you can afix a plastic ring outside the circumference of an aluminum wheel, then glue the rubber/foam to that plastic? The solid link instead of a spring and shock is certainly where the wear and tear on your suspension arm joints is coming from. If the arm can't pivot, it's going to try and move somewhere, and those pivots looked to be the weakest link. Perhaps go for a very strong spring and use bump-stops to prevent travel going too far. A suggestion for stopping the cars when you lose driveline or tires: rig a parachute system on another radio channel. It's how the big boys do it!

[@BobBasshead]

Damm how I miss Englishtown Raceway Park (New Jersey - USA) Used to go there in the mid 70's early 80's, seen a lot of Top Fuel dragsters, Funny Cars and occasional Jet dragsters and Monster Trucks. Always went to the pit side to see them up close (and I raced my street cars, nothing fast but won trophies). Great memories!

[@genztuberguy3173]

Whenever I watch your video, I always think of if you had some kind of fpv setup on car in a secure way, you could pilot the car much more safely, and avoid it from flying far away after collision at such high speeds,

[@hepworth1086]

This man is keeping my bank account empty. Thanks kev 😂

[@zachyurkus]

I absolutely think the reason you are getting the bounce is because of the prepped track surface. Same thing happens to real cars when they have too much grip, it’s called wheel hop. Wreaks havoc on the driveline parts. Those little cars with all that power need to be able to have a little bit of wheel spin, I would think. Especially when accelerating early in the run.

[@michaelhorne8366]

No such thing as too much traction in drag racing. Wheel hop is caused by the driven wheels pushing forward and losing traction. On an IRS setup you see an increases in toe angle which causes the wheels to slip. Once the traction is off they snap back to their normal position, bite back in, slam forward again, rinse, repeat. It happens on live (solid) rear axles when the whole diff assembly rolls forward, compressing the lower trailing arm bushings to a point where they cannot move anymore. The sudden bump as the diff hits limits causes it to break traction, which allows the diff to fall back, wheels to bite back in, push forward again, also rinse, also repeat. The answer is always a stiffer bushing in your lower control arms (IRS) or sturdier trailing arms for live axle racers. Considering the twist visible in the lower control arms at the end of the video this is almost certainly whats happening. I would be putting a solid control arm at the front instead of a damper as Kev speculated. Hopefully he'll have a look at some drag car info for advice.

[@muskokamike127]

100% that's why. The prepped surface helps with traction but it also prevents the wheels from rotating by increasing rolling resistance and since it isn't consistent, you get wheel hop.

[@KevinTalbotTV]

Maybe alloy lower arms?

[@muskokamike127]

@@KevinTalbotTV no, just stay off the prepped surface, it's also weakening your foam.

[@truckinghell1655]

Good to see the free loader is there again . Even rc mann has clocked max and his agenda

[@LuckyColt2005]

And this is why I love drag racing

[@TylerSL92]

Who let Max out of daycare? Boy follows Kevin around like a lost pup

[@narutofanz4]

salty boy jealous you dont have any cool friends

[@ProbablyRaife]

1hour club 👇👇

[@TheSimHome]

Racing down, one of these drag strips is actually what I do. I have a lot of fun doing it.

[@andrewlongman6308]

The move to larger diameter wheels is certainly a good idea. While they require more initial torque, larger diameter wheels can sustain much higher speeds.

[@Ziggiep09yt]

first

[@KevinTalbotTV]

Boom!!

[@circulatingflute]

I love your videos Mr Kevin!!!!!!

[@furtivedoom5261]

@@circulatingfluteyou mean Mr. Talbot?

[@michaelcicone9837]

What about a solid resin wheel you could make it on a lathe

[@Minnesotavikingsfan738]

@@KevinTalbotTVHi love your videos

[@DustinDIY]

Another maybe tip.... Throttle extension. So you can more gently and precisely apply throttle. That will help with human error shock to tires and drive train.

[@nicholasstocker8864]

Fun Fact: These dragsters are so loud and thundering that if it was measured on the Richter Scale, it would the equivalent of a 3.2 magnitude earthquake! 🤯

[@mcb0b1]

Race tracks are finally getting smart and bringing in influencers to help promote the track.

[@PiX3LS_XD]

7:05 "whats goen on?!"😂❤

[@TheRocker9981]

I'd love to see Kev build a drag car - maybe not jump into top fuel/funny cars but maybe Super Comp or Street Eliminator

[@fltltspike232]

omg i was thinking the same. maybe pro alcohol. we know he wants a loud car haha.

[@hagerdhotrodz]

It would be cool if your group of speed runners could put on an exhibition intro as part of the actual show! 💡

[@KevinTalbotTV]

that would be fun!

[@coventrykid08]

I think if the issue with the wheels fracturing can be overcome. By machining some solid single piece wheels. The next issue is to try and look at the layout of the internals to improve balance. Finally the down force could be tweaked to get more load on the wheels at high speed. I’d try contacting a local university engineering department to see if they have a wind tunnel and would be willing to help.

[@tonyv7660]

Dunlop, McGuiness, Martin AND Talbot? IOM going to get crowded with superstars 🇮🇲 🇺🇸

[@CarlBradbrook]

KEV... make the wheels aluminum and the tyres use brake pad material - high speed composite material (FORGET THE FOAM) think outside the box on this

[@garage5125]

Remember you pinned the throttle on a drag strip. Those things as you know are sticky as hell, and by putting full throttle with ton of grip, you put too much stress onto everything. Combined with the entire car hopping around you end up with massive energy jolts onto the drive system. Might be worth it to take the car to accelerate on the normal surface and use the extra sticky only for braking

[@KingLoggFrogg]

Have you ever thought about running a split driveshaft with mid shaft bearing supports? It’s likely at that length with any small imperfection it will start wobbling! Mid span supports (bearing cradles of some sort) are super common in the real world and in RC

[@snjert8406]

I think he's put that in recently

[@snoop6300]

Classic Talbot driving

[@dspencer8827]

Maybe put a camera on your speed car kev . Try and link it to a screen so you can keep car in a straight line whilst keeping power on

[@a_bad_channel]

my man is living his best life

[@AutoMaverickPete]

Loving those legend cup cars, I'd of liked to of raced them yrs ago when I did Caterham. Nice to see Mark the graveyard channel guy there.

[@OliveiraX]

Although the surface seems completely flat, it isn’t. Nothing is. IMHO, either use higher profile foam tyres, or install shocks. The car needs something to absorb the surface’s irregularities. At that speed, any tiny bump is magnified tremendously. That’s why it hops. Nice job. Keep on pushing!

[@rubenthemastertech8631]

Agreed.

[@slayreshilkett8173]

Everyone should go watch a nitro drag car run! It really is unbelievable

[@s1lv3rbordeaux47]

An idea for high speed wheels, is to find a company who is able to produce copolymer injection molded plastic. That way your wheels would be basically one piece with two densities of plastc/foam. An example of this process is those toothbrushes with grip on the handle as they are made as one piece.

[@SRS-GAMES]

Just found your channel, very impressed, lots of great content to binge on. hope you manage to sort out the tyres and get the record Kevin, can't wait to see the next episode in this series, that's some seriously impressive engineering and knowledge.

[@hillbillygaragecs2921]

Kevin must read!!!!!! Build a carbon wheel but use a over cage aluminum structure over the carbon fiber where it can be glued to the foam carbon fiber in between like a ladder folded around the rim then you have more carbon fiber glue to but it will be stronger

[@rudemotos137]

Traction control. Nice power curve. 👌

[@m2cracing168]

WOW! what an awesome experience!!!! so many different fun things happening!!! M2C 6 LUG HUBS MADE IT THRU!!!! btw, now you know what your infraction feels like!!!! Keep it up you'll hit the goal!!!!

[@christoskaragiannis7973]

This car needs to become a 6-wheeler and get that WR. More POWER & MORE TIRES!

[@user-li3so1tb2t]

You got ear plugs in and “ears” on and it’s still loud AF. The camera does not do it justice but I know what it feels like and your expression is priceless Kevin. Especially when it caught you off guard…🫶🫶🫶

[@needmoreboost6369]

Absolutely epic! Santa pod is definitely the place for speed! Had me worried with that prep though! The base of the rc was never meant to see that weight/power and traction!Definitely a good idea with the shock’s Too! If it’s possible on those arms To limit torsional unloading of the control arms a pair of shocks per arm at the front and back of the tower will help reduce tramp and help keep dampen those vibrations when peeling the tyres also at that power and weight an extra trailing link or link’s from the rear of the chassis to the leading edge of the lower control arm or both will also reduce the unloading, I’d suggest going back to springs but source some seriously heavy wire! perhaps small engine valve springs or similar with heavy shock oil to suit,And for the wheels I’d go carbon fibre! the only wheels that stay on the front of my rwd speed run car are carbon/foam! It’s 1/8th scale rear drive but with a 1/10th front end, so the little wheels are properly spinning! Plastic wheels just expand or explode!

[@alexpetro240sx]

Soooo dope. Great way to start sunday morning.

[@nothing0062]

Where the garages are behind the start line, there used to be a shed where you could stand. When they took off it filled with smoke and you got peppered with rubber. Loved it! Sadly thats long gone.

[@kingtriton7202]

I went to the drags once. They where so loud and powerful they made my eyeballs shake.

[@ElSelcho77]

I like track racing so much more than a thing just going in a straight line and after 4 seconds the run is over. But to each their own :)

[@adrianpilbeam7403]

Love this video mate. Keep going. Your determination to get that record has to pay off soon!!

[@OVGR]

If you look at slowmotion video of racecars and dragster tires. The rubber tires have loads of flex so much you can see the wrinkle in slowmo on launch and match that with their suspension travel. Id say thats what keeps them from hopping on that prepped surface. The RC not having any suspension or flex at the wheels to absorb all that torque on such a sticky surface. It makes you wonder your wheels arent the issue of why they keep failing but maybe finding the proper surface to account for the wheel spin. Also having a lengthy run up to gradually build up the speed so all the G force isn't put on the wheel/tire so quickly just tearing it apart or so your not giving it the chance to spin the tires and make them blow out that way. But im just kind of shooting in the dark. Im not an expert and im not sure if all that makes any sense but yeah.

[@wijibo6772]

Standing by the starting line as a top fuel car takes off is an experience. I'd suggest doing it at least once. Fun Fact: Top Fuel cars idle at 100+mph.

[@speedy_brian2693]

Hi Kev, I always love watching your videos, could not draw myself away from the screen, that car is absolutely insane!! Keep up the amazing work. Mabey at some point you could do a vid on you camera gear like the one from 5 years ago? Stay safe. Looking forward to the next vid!, 😁❤️

[@core_jared8441]

Those drag cars were crazy

[@robertestrada912]

Awesome video!!!! Happy RC’ing Y’all!!

[@deanopud69]

It was so cool being at Famjam RC event one weekend and then the following weekend bumping into Mr Kevin Talbot again at Santa Pod Main event I’m not stalking you Kev lol we just have the same interests! RC cars, monster trucks and fast stuff ❤

[@brandens7615]

When you overpower a high traction surface to get wheel hop. The tires don't completely break free but they break traction and gain traction in rapid succession causing a hopping effect.

[@RCTVKOROPower]

Wonderful. I always enjoy watching videos. thank you.

[@BeardieD]

Aluminium wheels that are 2 part bolt together, you then have a foam tyre that can be pinched within the join, ideally the foam should be shaped to fit rather than pinching randomly. BUT also use glue aswell!

[@bigbadwrastler22]

EA6398 and AF163 adhesives stick to aluminum great (literally used for aluminum helicopter blades) Or just use JB weld

[@stonedpanda6903]

kev you need to start a drag build like this if you want kev to make a rc drag build

[@michaeltorpy3366]

Awesome video as usual been to santa pod a couple of times when in the UK every petrol head should visit at least once in a lifetime you have to feel it to believe it brings back good memories typical u k weather though rained for the whole 3 months I was there end 2019/20

[@bryanhill1419]

The percussion from a Top Fuel Car off the line definitely stands you in place!

[@Im_a_bot_in_apex]

The g force must be insane on those dragsters. Going to 225 in 4 sec is absolutetly mind blowing

[@Livlifetaistdeth]

Clicked to see the rc but stayed for the real power. That was fantastic.

[@dazofthemoo1531]

WHAT A FANTASTIC VID. LOVING IT.!

[@jasongardner9127]

Epic video.. I ❤drag racing the feeling u get when they take off. The Best is doing it yourself.

[@oXblacknightXo]

Errinnt mich an Richard Hammond der gute Mann. Stabiler Bastler, danke für die wilden Videos

[@codyvirga]

All right, Kevin! Thank you so much for posting this we have all been waiting!

[@geekyzebra91]

Nothing sounds better than a hemi power funny car

[@brotherclinton.]

I can see the world's Best Truck in the Background and Love the colour

[@LJGonz7747]

Greatest RC content on KZbin by far! Thanks for all the hard work Kevin CHEERS MATE! Love your channel from Washington State!!!!👍🏼👍🏼👍🏼👍🏼🔥🔥🔥🔥🔥💯💯💯💯💯😀😀😀😀😀🇺🇸

[@Calibra_Luca]

Finally a new video for this car 🙏🏻