Expensive ALL Metal & Carbon Fiber RC Crawler Car

[@johnnyrainscustomrc]

I really like that chassis bro very clean it would look sick with a proline 1955 f100 body bro i can send you one if you want kev ive done one recently bro 🤙🤙👊

[@KevinTalbotTV]

Arr man that would be epic! Obviously you'll get shoutouts to your channel, I've got more vids planned with the c10 too :) Everyone check out Johnnys channel, he does the best rust rc bodys ever!

[@johnnyrainscustomrc]

@@KevinTalbotTV awsum bro ill send to pats for you as i have a Christmas present for pat as well bro have a great day mate🤙🤙👊

[@donkdave83]

@@KevinTalbotTV ever thought about a rc jet car just because would be a neat build

[@everythingjacksrc7201]

Yep everyone check out Johnny rains channel he does the best body shells in the world 🌎 I am a subscriber and I can not wait for another spray painting video Johnny.

[@KevinTalbotTV]

@@johnnyrainscustomrc thanks man, love your work absolutely stunning!

[@tomtinkersrezlife278]

Man from when I was a kid in the 80s these have turned into a peace of art over the yrs dam

[@aydanangus]

Kev: I have to many RCs Also Kev: gets more RCs

[@botdriver3761]

He already said that those RCs get sent to hin for free!

[@johnnysix7162]

kev: expensive rc crawler - $259 also kev with a $500 rc: hey guys this rc is dirt cheap

[@barracuda6817]

Ikr

[@tyladube801]

Yea but it is considerably a expensive RC crawler chassis cause it's build to be light yet durable. But yea that's Kev for ya😂😂😂

[@anonemoose4138]

There you go

[@ezeNdog]

Well my factory plastic axial wraith cost $600.... So $500 for medal, carbon fiber, and all electronics... That's cheap...

[@travex4706]

All thanks to you I’m deciding to lay off games and go out there and drive and start bashing and repairing,thank you

[@Acheiropoietos]

I’m loving this axial setup. So many bodies available!

[@stevenboss8112]

Awesome video kev 👍

[@yjmoneypit]

Were i work, we have small parts tumblers, i was walking every time i used it saying "TUMBLE WUMBLE"

[@KevinTalbotTV]

haha

[@antoniorios7289]

A blue truck like your real big one👍

[@lukasvelin6565]

The truck is massive

[@RenegadeAmiga]

Best mod for this chassis is to flip the front hubs to lower the steering link, drill the hub carriers so you can rotate them back to give a decent amount of caster angle. This will raise the steering arm close to the servo horn and give as much caster angle as a TRX4. This has none stock and the front wheels scrub bad! Also remove every screw and locktite it or you'll constantly have things falling off.. also grease the diffs and gearbox they ship dry. As do the shocks.. they also suffer from stiction so you need to remove a seal from the lower shock cap, they wont leak with one seal. Mine didnt have a friction disc in the slipper clutch either. Sort that lot and then drive it.

[@KevinTalbotTV]

Thanks dude, steering mod sounds cool :)

[@rollonwalker2403]

Very cool, can’t wait to see you take it out for a real test 🙂

[@theirishaxe9405]

I wonder how much the Mark up on this truck is those exact aluminum shocks are 20 bucks on eBay i actually just bought a set and they feel great after you bleed them correctly

[@msrcracing8387]

can you link me to parts for this? Mine came with a bent axle shaft :-(

[@rcjoe406]

Holy cow that's a nice rig the big manufacturers could learn something from this

[@muskokamike127]

The frame itself is $585 CDN. If you want to add that cost to your car, more power to you but not all of us want to spend that kind of dough. I mean, literally I spent $700 on a 2006 Ford F150 4 x 4 crew cab 3 years ago.

[@itchyprince3793]

Yay! Back to the rc content! Not that I don’t like the business content it’s just not quite for me.

[@easondailey6316]

Ohh kev I think a Dodge power wagon body will look sick on it 👍👍👍

[@6ssam996]

A JEEP BODY OR FORD F 150 BODY WOULD BE SICK

[@shadowkeeper1217]

Go get a 1971 Challenger body and make it 'Kev red'. That would look good and silly with those monster tires🤣

[@abnernelson7962]

Shadowkeeper121 it would remind me of a crappy Walmart rc car that can actually crawl😂

[@atomicdeath10]

Was there ever a follow up to this video? Just ordered this off Banggood and can't wait.

[@Shahbazabdulla]

Is it good?

[@atomicdeath10]

@@Shahbazabdulla it's not bad at all. I put 15wt shock oil in the shocks and the old electrics out of my Trx 4. I think with a better Esc it would be really good.

[@thegreatsoutherntrendkill272]

@@atomicdeath10 Do you know of stock acx10 diff gears fit in the axles?

[@1622_SCALE_DIVISION]

Excellent review on this 👍👍

[@pablofinklmatter5278]

Kevin I’ve been subbed To you since 1K and I still love your videos keep doing what you’re doing

[@KevinTalbotTV]

Thanks bro :)

[@pablofinklmatter5278]

Dude there is no way u just replied

[@kahlil-khaos9996]

It's really nice that it's mostly fastend with Allen bolts instead of screws

[@barracuda6817]

Most rc cars are

[@jxyyvans7350]

I got the same for chrismas last Year it is a good crawler.

[@mdfishman1959]

1951 Chevy stepside pickup would be sick on that chassis

[@ljluke5669]

Oi from Australia 🇦🇺 Massive fan! And what an absolute awesome video man! KiLLERBODY" LAND CRUiSER LC70 4WD body... Seriously something for you that’s different, it would LooK KILLER AS! 💯🔥🏆😎👍 Ps. That land cruiser body on that all Metal & carbon fibre chassis out on tracks would be the best!! Js lol

[@mdfarizal]

First video i saw and subscribed instantly.

[@6ssam996]

WOW NOW I KNOW WHERE I AM SAVING FOR😍

[@rcbymatej3189]

Kevin, when to put loctite and when not to? So, you put it on a bumper, but not on the belly screws. Also, no oil on pinion gear? I am just curious and want to learn more. Tnx

[@Bawla187]

Very solid crawler ✌🏿 you can blue lock tight every thing 😊

[@saulsrc5714]

Try a Toyota land cruiser from top gear. That would be so cool kev Very nice crawler 👍👌💪😜

[@willgerdesrc3687]

Dude nice easy build I think the proline willys body would be awesome!

[@ckheights3147]

Dear Kevin, thank you for making kid friendly videos! My 6-yr old is obsessed with you!!! Keep up the good family friendly work! ❤️❤️ But he’s hoping for an Xmaxx for Christmas - so, I guess no thank you for that. 😂

[@KevinTalbotTV]

Thanks you for your kind words, he will love the x-maxx, if you get the bluetooth module to can slow it down for him while he's learning :)

[@ckheights3147]

Well he will have to save for an x-maxx!! We have 2 devastators for inside RC and we bought the RedCat Shredder and blackout pro sc10. He is the best driver out of all of us. A 6 yr old!!!!! 🤦🏼‍♀️🤦🏼‍♀️🤦🏼‍♀️🤦🏼‍♀️He’s watching you now. Obsessed!!!!

[@deslygeuns6234]

Kevin can you help please i bought the same crawler on your video but what for pinion do you use? grtz from Belgium

[@whatdudeman]

As per usual Awesome video😀

[@ExperienceRC]

Perfect speed on the video, well edited 🤟🏻✌🏻

[@bradley5157]

Love this channel! We love this guys character! Your awesome brother!

[@lacos1795]

Pretty awesome looking chassis/roller🤙

[@ranilintong9715]

That's so cool.. 👌👌👌😲😲😲

[@beetlebailey9510]

Baja bug body would be cool Kev... Nice video love your channel 👍

[@0zmosis2001]

Thanks for explaining how much backlash you should have between your pinion and spur gear I'm sure that will save a lot of headaches down the road for quite a few people if they do it correctly

[@msrcracing8387]

DAMIT KEVIN.. I just ordered one. I have a new in the box transmitter and stuff at home already this is sweet. Cant wait

[@moisescastillo217]

What a great quality, you need to have a lot of this things, far better than the another chasis, except that will be expensive to repair, a great quality upper cover will be a great improve, specially if will be indestructible

[@TheRCBasher69420]

3:35 thats what she said🤣🤣🤣

[@cdub015]

Those driveline angles are insane....

[@TargetingXmod_RC]

Got one like that a few years back... still "blings" :P I moved the batery tray to the front and put rx box at the rear! I have it on a Hard Mercedes G Body!

[@konkor9940]

Nice! Do u have some pics?

[@christofferlarsson6989]

The proline jeep comanche body is good looking!

[@weedking8357]

defo should do more crawler videos maybe axial scx24 stuff be epic

[@rcgarageph7228]

2:55 I need that music I've been looking that for 2 years

[@ChiTownBallin2]

Dansez - Fasion

[@rcgarageph7228]

Thank you so much

[@tabdougherty8549]

YO! Kev doing my part. Thanks for all the content

[@faceplant755]

What kind of loctite do you use? If you use the super strong stuff on your pinions than if you break one you can’t get it off.

[@jan.w.g.n.r]

Can you pls try the reely free man? Please🙏 I don't know if I should buy it as my first rc crawler.😅

[@DirtDobberRC]

I got this same kit. I would love to mount a pan hard bar for the servo. I have one but no idea how to mount it and the videos I’ve seen really doesn’t help much. Do you know how to mount a pan hard?

[@wakdanbarrakuda]

why the battery place change back side?? its disturbing servo ?

[@stevensalvador706]

Can't wait to see what it can do for rock crawling

[@RevXSCustoms]

Put them diffs in a few of my custom projects,Well built units thats for sure

[@iverdh3780]

The Rusted body looks awesome!! I´m waiting to watch how this chassis perfom.

[@Jack-sy8hs]

Can you get a 1/5 monster truck? the red one that the other youtuber has, it’s bigger than the xmaxx and should be fun for the channel! Nice video as always buddy!

[@gavey100]

That’s a great price for one as well 👍🏻👍🏻

[@GRAFFREVIEWS]

get the Pro-Line 78 (I think that is the year) K10 Step Side 2 piece body. its one of my personal favorites and if you aren't a fan of the square body style you could always run the stepside bed on the C10 cab. I got the stepside bed mounted to my now discontinued Pro Line trail honcho 2014 Chevrolet Silverado 2500HD Cab and absolutely love it!

[@kriscarter5440]

Hi. Recent subscriber. I'm 44yrs old and recently gotten into the hobby 2 months ago with a new 4wd base slash. Now I have 7 including a UDR and 2 crawlers. Haha. I've been watching all of your videos ever since I found the channel. l just came across this one. I've searched but did not find a follow up video on it. Did you, or will you be doing one on it? I know it has been a long while since this video posted. Can you share a link to the video if you made one? Thanks Kevin! Keep making these awesome videos and living your dreams man.

[@1622_SCALE_DIVISION]

Great review 👍👍

[@fabianrengelink2662]

A Fooord Raptor, or Toyota Killerbody LC70 in black would be nice. 😉🇳🇱👍🏽

[@nathanz602]

Shocks look like they need some oil, they look way too bouncy for a crawler. Great video though!👍

[@LulzRoyce]

5:42 OH MAN i can already see the chassis flex there. This thing will take one bad landing and will bend and job's done lol. Keep things plastic yall. It flexes.

[@isaiah9313]

Carbon fiber is very flexible, it's way better than plastic.

[@mailmanx69]

I hope the pinion and spur don't strip out in a hard crawling situation. When gapped correctly, they seem to have very little tooth-to-tooth contact.

[@sueatkinson5370]

I like the rusted body on it looks cool

[@miguelgaviria5836]

Wait so is the reciever box waterproof or do you have to do some extra modifications?

[@FarmerFpv]

Kevin, can you please update the link to this crawler kit? The link doesn't work. Thanks, buddy! You're awesome!

[@jeremyperez4771]

Definitely the rust body. It looks sick

[@clodbusted1776]

Looks good! I’ve been looking to get a new trail truck 👍🏻

[@cowza3]

apart from a couple of parts,how is this better than the RGT EX 86100 Pro kit ?

[@eliobakhos8740]

hey kevin just a qustion man ! can you do for this chassis a 2 speed mode like other crawlers ? or something to adjust the speed lower and higher ?

[@dflyingmonkey9]

I wanted to buy that in my 1st ever 1/10 scale. Is it good??? the performance? transmission?axle?shock? is it worth the price?

[@biosponge7123]

Could you find a dodge power wagon body to put on it

[@mrplay145]

Ive been waiting for this review!!

[@JohnConnor12]

Need to get a new servo for my TRX 4 sport, so I think I'm going to give that servo a try.Waiting on my WL 144001 that I ordered on Thanksgiving. Pumped for that!

[@thijsheinen7846]

Like the crawler video's but miss the bash video's hahaha

[@straubz5450]

Started watching your channel 7-8 weeks ago, now have 5 crawlers and this is my latest one, building it into a miniature version of my real grand cherokee 🤣

[@KevinTalbotTV]

haha epic man :)

[@dana2750]

So that whole kit was only $259? Including axles, transmission wheels etc?

[@KevinTalbotTV]

yes

[@85LARGE]

@@KevinTalbotTV I got one for 257 + shipping, motor, speed controller and a servo on Ali

[@ryanjohnson742]

Put an old Ford on it. That would look sick.

[@dougwaxler3088]

Would love to see this upgraded to 4 wheel steering. Is it worth building over buying a redcat and upgrading a bunch of parts?

[@Happydays2513]

That thing looks so good ray body bud

[@tomthurgood3712]

Would it be possible to get spare parts for this like gear or driveshafts

[@bobzilla9p0]

It is almost 100% SCX10 gen 1 based. Someone basically took all of the aftermarket Chinese copy parts that are SCX10 compatible and packaged it as a complete kit instead of you buying them all separately. The "Rock Lizard" kit is the same thing but with SCX10.2 parts from Xtraspeed (a Chinese aftermarket clone company). The parts aren't bad. I have a set of these exact axles under my Redcat Gen 7 and a set of the Xtraspeed "Currie style" Wraith/Bomber axles on my Force RC Hammerjaw. You have to watch out for weird little things like check all the grease, or no thread locker on the metal assemblies, or a friend received his SCX10.2 axles with the pinion shaft output and cover upside down (no issue just had to flip both) because the workers don't necessarily understand what they are assembling.

[@tomthurgood3712]

Ok thank you very much

[@thegreatsoutherntrendkill272]

@@bobzilla9p0 So the stock scx10 diff gears should fit these axles?

[@robertkarsner8874]

Very interested to see more on this crawler. You have a bunch of the C10 body's go with an old school Ford body now, change things up a bit.

[@ImurTuta]

When are you going to bring this one out again?

[@main_beatz262]

Nice chassie it would look cracy with the trx4 tactical unit

[@dwaynethayer7868]

Looks great 👍

[@Charliebrunker67]

what would be a good water proof motor and esc

[@jannovak6193]

I've replaced gearbox in my gmade r1 for same you've got in this video, unfortunately can't climb anymore, the motor start burning. I tried 27 and 35t motor and it's fast until goes uphill, then get stuck and start burning. I'm waiting for different pinion gears, hope it will help.

[@drakunusrcmaniac8708]

Hey Kevin.. What happens with this one? Can't find the continuation of this Chassis..let me know Please

[@1990themule]

I reckon something you wouldn’t expect to be a rock crawler like a sports car body

[@need4drift]

Waiting for that gear box in the mail for a project. By the looks of it the spur gear is not 32pich.. Do we know what pitch that gear is? Thanks for any good info.

[@theflamingoboy7638]

Im thinking about buying this myself.. But is it waterproof? Or do u have to make it?

[@demislazzeri5508]

Hi Whot is the blue Liquid called? In the little Red bottle, which you used for the screw. I always watch look at you videos Thank you very much

[@mavsgarage5245]

Put the ripper motor in since the transmission is made of steel

[@jamiehill5849]

What would you say would be the best buy around the £400 mark?

[@squarebodyobsessed7287]

Put a k5 blazer body on it that would look sick

[@4wheels269]

I go to Walmart in find bodies that fit my vehicles and I will actually buy a dirt cheap Walmart car take the body off it and put on the crawlers cuz those look really good. And they are pretty durable for crawlers because you're not bashing them and most of them have had lights in them now I took off a Ford raptor body and put on my arrma outcast needless to say it only lasted about two runs about crawlers will last way longer. But good luck and keep the good videos coming Kev..

[@callumroxton5017]

Hi Kev I think the rust body on the that chassis would be awesome

[@christopherlastname7638]

Good looking truck!