Right on! Very informative. I’ve got a 13 Sportage ex awd with a severely grinding outer passenger cv. Picked up the part from a local store and now have a visual manual....SCORE! We need more people like you out there saving us time and money! Thanks again and keep it up
@jiwbink Жыл бұрын
LOVE THE INTRO PROMO,TOUTING THE BEST HOW TO MANUAL, THEN MISSPELL AXLE!!LOL!!
@jayspencer4982 жыл бұрын
The 2013 Kia Sorento AWD has a different strut setup. The upper control arm is not on this model. The upper part of the knuckle is connected directly to the strut. Only remove two bolts from the strut and the knuckle will pivot forward.
@KuriVaiM2 жыл бұрын
this is left side right? i have to replace whole right side witch is bit longer shaft
@domwebhost2 жыл бұрын
What size socket are you using for the axle nut?
@BugzKiller7 ай бұрын
Can anybody PLEASE tell me if you get a New Spring Clip when you buy a new axle? If not, can you use the old one?? Thank You.
@HewHolden2 жыл бұрын
Is it possible to do this without removing the knuckle? I have to replace the hun anyway
@HaynesManuals2 жыл бұрын
Unfortunately no, as the manufacturer calls for removing the knuckle as shown to allow room for the axle to be removed.
@marialee576 Жыл бұрын
How to replace 2004 kia sorento 2 WD wheel bearing or hub bearing driver side it seems everywhere we look cannot find anything on this vehicle so frustrating😡😵
@baltazarferreyra3 ай бұрын
It is for a 2007 Kia Sorento 4x4 K single
@jimmymolinaro75542 жыл бұрын
You conveniently forgot to show the most difficult part - removing the axle from the mid-way carrier bearing!!!
@genelambert47192 жыл бұрын
What.if.the.axle.dozen.come.out
@abirdiamedic42683 жыл бұрын
Zamjena semeringa kardana zadnjeg diferencijala kia sorento
@loganj.23292 жыл бұрын
What an odd way to install...everyone has their own ways but this one is very odd.
@colestaples20108 ай бұрын
This isn’t very good info. That axle tool won’t remove it from the transmission
@jayspencer4982 жыл бұрын
The 2013 Kia Sorento AWD has a different strut setup. The upper control arm is not on this model. The upper part of the knuckle is connected directly to the strut. Only remove two bolts from the strut and the knuckle will pivot forward.