KickAss Circuit Protection Systems - Fuses, Fuse Boxes, Circuit Breakers & More!

[@davidoconnor6051]

Craig should do all the video's, I don't mind watching his video's and he explains everything very well. There is a guy doing your scratch and dent sale video's for ebay and he doesn't do half as well as Craig. Craig makes you want to buy products and he seems like he loves his job.

[@KickAssProducts]

Thanks. We try to get Craig to do as many videos as we can but he is also actually our primary technician and is actually very busy helping our customers.

[@davidoconnor6051]

@@KickAssProducts you better work him harder then 😂

[@Solarlube]

Kickass really does kicks arse!

[@datghettoazn127]

Can you do a stress tests on them? I would like to know if they would end up burning or sparking

[@Aussie_Damo]

A 50a resettable circuit breaker is a dumb idea and start a fire once it resets itself and keeps shorting out

[@KickAssProducts]

The Idea of a resettable circuit breaker is so you can trouble shoot your system. ie, Un plug your appliances and then plug them back in one at a time in an attempt to find out what is causing the problem. We do not recommend that you just keep switching it back on if you have a fault or short circuit in your system.

[@pelecho]

Hello. The breaker work both way if something happens?

[@broderickproeger4025]

In the system you've got set up for demonstration in this video, you've got both a resettable circuit breaker and a fuse box (seen at 0:10, 2:47 and 5:45). Why would you need both?

[@KickAssProducts]

G'day Broderick,it was to show all the components off,with the fuse box you have to replace the blown fuses & also handles all your low current items,when using inverters & higher current items you would be needing higher current fusing systems like the resettable circuit breaker

[@kirostojkoski3684]

Do I need to use a fuse if I have a 120ah lithium kickass battery box with a 1200w kickass inverter?

[@KickAssProducts]

You do not, The BMS in the battery provides built in protection.

[@knight3131]

I have a question. I want to connect a fuse, circuit breaker and relay (since I only want to provide power to the device when vehicle is on). So should I Connect the battery to circuit breaker then to the fuse and last to the relay ?

[@KickAssProducts]

Unfortunately I cannot give specific auto electrical advice in a youtube comment section. I you are unsure about your specific setup I suggest you consult a qualified auto-electrician.

[@rodallen6652]

Hello. Thanks for your explanations. Do you have a 40A automatic resettable circuit breaker similar to the 50A?

[@Aussie_Damo]

You shouldn't use an auto reset circuit breaker. If you have a short the last thing you want is that to keep reseting/shorting as then It will heat up the wire or where the short is and can start a fire easily.

[@kennethwilson8633]

Love the name .

[@KickAssProducts]

thank you

[@marionsutcliffe1119]

No double pole DC breakers? As required for solar panels.

[@KickAssProducts]

Only one breaker/fuse is required for ground referenced systems.

[@marionsutcliffe1119]

@@KickAssProducts ah, I'm in a vehicle.

[@Nic7320]

A chassis rub on an earth wire?

[@KickAssProducts]

Not sure what you mean sorry Nic.

[@googlelimp9834]

yeah have one but everything has live and earth yet you only connect the live?? makes no sense sorry??

[@andufuse]

Got it.

[@KickAssProducts]

Thanks.

[@mtbc-trailsmihajlovic8909]

Those Killswitch are really poor quality I had a bad experience with three of them

[@KickAssProducts]

Sorry to hear that, if you have an issue with any of our products please contact us through our support portal and one of our customer service team will get in contact with you. supportportal.australiandirect.com.au/

[@marionsutcliffe1119]

Ya, seen a few videos recommending against them.