KICKER LX1200.5 First Look and Amp Dyno Test

[@wal]

*KICKER LX1200.5 - Five Channel Amplifier with Control Center and Bass Remote* *Shop for this Amp*: ebay.us/dQd4c0 Amazon: amzn.to/40OST32 See Five Star Car Stereo's Video on the LX Control Center - kzbin.info/www/bejne/imqyfnprlK-AaMU See My Previous KICKER Videos - kzbin.info/aero/PLu98-M_EowHOg5lUzMUQfxO9nRQ6i09vy ➡ Support OSS / Williston Audio Labs for early access to videos: www.patreon.com/OldSchoolStereo One Time "Tip" for Video Support: paypal.me/BigDWiz *VIDEO AND AUDIO GEAR* Camera - iPhone 13pro 1TB - amzn.to/3nCjGvc RODE Wireless Go II Microphones: amzn.to/3Q6NVHl Shure MV7 Microphone: amzn.to/3A4OICK Zoom H4n Audio Recorder: amzn.to/3BXjVsS 960 LED Panel: amzn.to/2Sxoq3S *TEST BENCH EQUIPMENT* SMD / D'Amore Engineering Amp Dyno (AD-1): is.gd/wccad1 XS Power D1400 Batteries - amzn.to/2BPFCKW XS Power PSC60 Charger - amzn.to/2CHGcfs Fluke 1000A AC/DC Clamp Meter: amzn.to/2Rw5WDA Handheld Dyno AMM-1: is.gd/wccamm1 My Favorite Precision Screwdriver Kit: amzn.to/3yAaPmn _DISCLAIMER: This video and description contains affiliate links, which means that if you purchase from one of the product links, I may receive a small commission. As an Amazon Associate I earn from qualifying purchases. As an eBay Partner, I may be compensated if you make a purchase_

[@kjata77]

"Watts you talkin' about Willis[ton]?" J/k, another great video. I just hope John Myers returns for the Kicker UnMasked detaild LX Series video in December :D

[@WidowedAudiophile]

Awesome video thanks for the great content Big D wizz

[@BudgetBassHead]

Big Dee sounds like he's living his Best Life! 😀 Great content as always 👍

[@WILLSHIP916]

Your videos always got the dope visuals...pat yourself on the back. 👍 👍 👍

[@wizardindustriesusa]

These might be the most well-thought out amplifier designs ever. Kicker is flexing! 💪🏿🔊

[@mattusapparatus5968]

Kicker has really stepped up their product development, this is a super impressive system setup.

[@AraceaeFanatics]

Stepped up? They've been an industry leader for decades.

[@mattusapparatus5968]

@ I know, and they've stepped up from even their own bar lately. What's your point? Did I deny they've been a leader or disparage their history?

[@WidowedAudiophile]

Kicker keeps on innovating hell yeah

[@TikiDoorman]

After the last amp you reviewed, it's nice to see the Kicker do well over its rated power in certified mode on the SMD AD-1, even when undervolted. Kicker doesn't mess around.

[@vincentrusso4332]

People rag on Kicker but they continue to be Innovative and consistently putting out new products .

[@gregdragoo4777]

They continue to overcharge as well. I would much rather go with ds18 or d4s or even skar for the money

[@natskar]

Woah! I could instantly tell you filmed this in HDR as soon as the video came up. Looks really good Williston. Also, really excited about these new amps, looks like kicker finally released a new amplifier that would be a worthwhile upgrade for those of us who have their IQ line

[@Bill_Bacon]

Love your video as they're on point, no conjecture and to the meat of the matter every time. Posts are on topic nearly all the time as well, Thank You!

[@Argedis]

Gotta love Kicker, that seems like a very high quality amp. Would def consider that for my next build. Wish Rockford Fosgate would get back in the game like Kicker.

[@Wolverines1]

Numbers are impressive but for me, it's all about sound quality. Looking forward to next vid.

[@Bassotronics]

Great amplifier! 👍🏼

[@chabat124]

Impressive dyno stats. The control center looks next level, to be able to make crossover changes from the driver's seat of your vehicle? -- That's really a Cadillac feature. I'm sure it'll be a Cadillac price, but it looks to be worth a premium price for an all-in-one solution. Your video is great. The time you spend on all the details really make your videos so easy to watch and they communicate the data in a way that's easy to digest and understand.

[@wal]

Thanks for watching and commenting!

[@hectorortega9131]

Your videos have gotten so much better with time.Congratulatios. I like how you put the ratings in the corner of the screen while you are doing the test. Hey, on your next follow-up video.Let us know to what is the signal-to-noise ratio on this amp.Appreciate it derek have a good day

[@wal]

Thanks for the feedback!

[@19_96tyler]

I was grinning the whole video! Pretty sweet unit!!

[@mac24seven]

That thing is a beast

[@ScottGunMag69]

One would be a nice solution for a kick ass well rounded stereo system. I only wish I had one of these back when I was younger and putting in stereos in my vehicles! If I decide to again this would be a simple component to start with.

[@danfalley9296]

Do it. I'm in my 40's and still put subs in my car, it's just so much cheaper to do it now.

[@MrTexaspete30]

I cant wait for it to come out i want that thing

[@johnpolaski6126]

I love kicker double thumbs up if i could

[@jlee8262]

Man thats a great looking amp! Wish the warhorses had those kinda of esthetics.

[@firebirdude2]

Mad your "Warhorse" doesn't have braids? 😆

[@jlee8262]

@firebirdude2 lol. I don't own one

[@smokeyou812]

Kicker said, "We need to go Old School! Plus JP's amps making us look bad. We need to step-up our under-rating game."

[@CajunReaper95]

Big D putting the power certificate claims to the test with the AD-1, love your videos man!

[@wal]

Thanks for watching and commenting!

[@willsteele9249]

Noooooooooooooooooooooooo! I really wanted to see the .5-ohm test... Thanks Big D!

[@thatguykai479]

Huh??? Never seen a 5 channel rated .5 on the 5th channel. Amplifiers run much more efficient at higher ohms loads to with higher voltage lower current.

[@wal]

Sorry I decided to save it and some other tests for the 2nd video once we know price and release date. Hopefully Jan 2025 🙏

[@slowbrezze]

1700$​@@wal

[@SG-Cichlids]

A lot of people hate on kicker. In my opinion they're one of the best car audio companies. Terrific products that perform and last.

[@leegiovanni8933]

Its not that they hate, its their pricing, this amp will cost near 1500 if not more for stuff that is not needed. JL audio does the same thing, and both are getting out bumped for the dollar.

[@SG-Cichlids]

@leegiovanni8933 but you get the quality the others you say out bump then for the dollar don't have. Yes you pay for the name but you have to think about the longevity of the product and consider that in the price. Also people hate on kicker constantly. Especially their subs. When their subs work very well and last forever. People just put them in to small of a box.

[@vincentrusso4332]

​@@leegiovanni8933the last thing car audio needs is another Alibaba build house cookie cutter amp.. R&D costs as well as proprietary design features. It is what it is.

[@LivinLoudwithAndy]

SUUPA CLEAN AND POWERFUL 🔥👊🏼

[@Watchingyou-daily]

They under rated it cause they know you will test them.

[@TikiDoorman]

Kicker has been underrating their amps forever.

[@miatgrad76]

Differential inputs...I like it!

[@PedroKing99]

Thank you looking forward to the processor review! Thanks Big D peace out

[@happygarage6310]

I'll be checking on pricing and availability. This amp looks like it will fit my needs in one tidy package.

[@kjata77]

Side Notes: STILL use a DSP, the control module is NOT a DSP... and STILL set the crossovers on the amp (with more tolerance on the crossover points as a safety measure in case the DSP ever fails). Also, SO HAPPY to see magnets used by manufacturers. I've been using magnets for installs since early 2000's (Harbor Freight, my friends... a good maybe CAF or Justin/DIY Audio Guy video).

[@JasonWW2000]

Exactly! This amplifier may have a few DSP functions (like a headunit would have a few DSP functions) but it is not a traditional full blown DSP that is capable of adjusting EQ, time delay, levels and crossovers.

[@wal]

I never said it was a DSP? It does have some time delay options but not a full blown DSP

[@bigredtruck42]

I think he's referring to the Features list at the 4 min mark where it says DSP Functionality

[@JasonWW2000]

​@wal This is in reference to some other people that have described this as a DSP amp. Some people get confused by it having a DSP chip in it. It's just a very basic chip. Mainly for the crossovers.

[@JayTR_10]

I didn’t hear him say this amp had a DSP and you didn’t need one?? Where was that you are referencing?

[@jesd319]

i like it depending on price i might switch out my current amps for it in the summer.

[@Luisv951]

I just bought a new amp for my mids and highs 😭 I’ll buy this one for another build down the line 😀

[@SouthFloridacarshows]

Kicker stepped it up. Great testing Big D!

[@wal]

Thanks for watching and commenting!

[@ShaneMcguire-x1m]

Devil went down to Georgia... Tested a kicker amp .. gee, I paid for my items at a store once, seeing that the Grand total was the number of the beast... I swiftly grabbed a totally un-needed bic lighter to change the total amount of money that I owed. Can't believe triple 6 showed up on your SMD Dyno! 😂

[@wal]

Have you heard “The Devil Came Up to Michigan” by KMC Kru? I’d highly recommend if you haven’t

[@r3d-1truth17]

Thank you again, as always, for all the hard work and investigative reporting that you provide. I will make this quick- although we all love Mo Powa… is it not dangerous/concerning when ampsnlike this are putting well above their RMS power output? I would fear if I hooked this up to my 125rms component sets, this amp would sizzle the voice coils when I try to bump dem things… what you think/have to say about this? Thanks & Cheers!

[@justgoofingoff]

These amps are game changers, looking at the 7 channel to replace my aging JL..

[@firebirdude2]

Kicker FTW!

[@Geerladenlad]

I could power so many tweeters with one of these!👍

[@xiongxiongloft5937]

What about the mono block ones

[@Andrew-fr3bp]

I just found my old pair of 1995 10" Kicker Competition C10a subs (red white black logos) in their original boxes. I wish I could send to you for testing ! They will be my project for next year for a garage stereo. Cheers and happy holidays !

[@jeremyglasco5936]

Very impressive!

[@tatsumaru12345]

Really, reallyyyyy digging this! This seems like the upgrade from say a pioneer d9705d. Im just curious what the price gets announced at. Would not be surprised to see 599$ msrp or higher.

[@bubbawubba2307]

Decent watts for the front stage but I'd like to see more wattage for the sub. And I'm sure it's not budget friendly either

[@donaldhastyjr4066]

This amp looks fantastic!! Did you ever test any Infinity amplifiers BigD?

[@Pi_Cue]

I really really like this amp style 😍. Well done Kicker

[@ABEULER1981]

GREAT VIDEO!!!!

[@darrenc7490]

What topology is the 4-channel section this amp?

[@wal]

Class D all around

[@cedoman1]

I like it... well thought out

[@ripplesnake]

I want one.

[@bobbybyrkett7751]

EXCELLENT 👌

[@JasonWW2000]

I was thinking the circle arrow on the LED control panel was for it to automatically cycle through different colors. You say it's a reset button? Why would that be needed?

[@johnmyers5653]

If you decide to put it into a different vehicle or change your speaker configuration it will give you a clean slate to start tuning for the new setup.

[@JasonWW2000]

​@johnmyers5653 Is this John from Kicker? So your saying it's not an LED reset button, it's actually a reset button for the amps internal crossovers, settings, etc...? Why would the reset button be next to the LED controls? It seems easy to press by accident. A tiny button or one you need a paperclip to press might be a better choice to avoid accidental presses. Why do the mono block amps have the same reset button when their controls are all manual (no Control Center functions)?

[@johnmyers5653]

@@JasonWW2000 The position had do do with the layout of the circuit board. It would not have worked in another location without redesigning the entire board layout. The good thing is it is not a press once to reset, you have to hold it down for 10 seconds and that should make sure it does not get reset by accident. The reset on the sub amps is to reset LED back to factory red color and just like any computer or head unit, its there for reset or diagnostics if something in the microprocessor goes haywire. I doubt it would be used but just in case so it could be easily user reset. The crossovers and Kick Eq are DSP based and will immediately reset back to where the front panel controls are set.

[@JasonWW2000]

​@johnmyers5653 Okay, that makes good, logical sense. Thanks John. 👍

[@ShawnKDooley]

Good looking amp

[@nunyabizznizz7326]

the only channel i have notifications enabled on, big D for the win!

[@koolBOY8323]

single allen key for all connections, and all the connections on one side. as the universe intended.

[@justinvanburen8259]

Another great video!!

[@wal]

Thanks for watching and commenting!

[@themadmallard]

I've been meaning to ask, these newer amps of the last 10 years with remote connections, those RJ connectors, is the cable just a CAT cable?

[@wal]

In most cases they are CAT5 or CAT5e cables

[@rustybrown9829]

Really awesome.

[@AnthonyO-t1c]

Do you get cleaner power at higher ohms, rather than wire to max and keep it turn down?

[@johnmyers5653]

higher impedance will give you better overall sound quality, speaker control, and headroom but obviously will not be as loud. there is always a trade off.

[@matthewborunda9711]

What website do I look up thinking about getting one?

[@BrettStevens4321]

Will we ever have a wireless audio input so I don't need to use a poor sounding line out converter?

[@johnmyers5653]

Kicker amplifiers have not needed LOCs since 2010. The only time you would need anything else is if you have a radio that needs to see a load to operate (expecially, but not only chrysler). Thats why we offer the KISLOAD2/4. 25Ω loads that do not have any effect on voltage or frequency response. The CXA and LX accept 400 watts directly into the amp with no LOCs or signal loss. Some vehicles require interfaces that do a good job but are somewhat expensive.

[@tallnrough68]

What was the efficiency?

[@CVLova]

would love for you to test the Onkyo X-T4 car amp :)

[@mrfatabeatties5055]

Where do you get one ?

[@shaneweighall4013]

Ty for sharing this

[@wal]

Thanks for watching and commenting!

[@Bassknots]

To me the amp resembles fosgate and Jl amps .

[@OxBlitzkriegxO]

That's a nice amp

[@Raymo2u]

I wish someone would make a 5 channel that does 250w x 4ch @ 2ohms and 1ch doing 4k @ 1ohm. I know SMD has one thats close...but still a little lacking for the subs. Id get one for each vehicle I have.

[@wal]

I think KICKER makes these for people who just want basic updated bass and not window shaking style. I’d love to see a bit more power on the sub side as well, even taking a couple hundo from the main channels if needed. I think 150x4 plus 1200x1 would be a killer sweet spot. They are not far off and still have a very compact size as well

[@mugsybonze968]

My amp is 2 channel amp rms 600×2 = 1200 and volt 34.6, bridge 1x1200 at 4 ohm volt 34.6, i'm using bridge for 4 midrange speakers rms 300x4 = 1200 with series/parallel what is the best way to get burn out amp, stay with dsp and don't gain the amp or gain my amp and or vice versa, wha u think

[@dustincrosby8158]

I WANT TO SEE A MTX AMP DYNO

[@kjata77]

Dean's video was GREAT, as his usually are... Five Star Car Audio. No need to repeat the same info. Also, Kicker UnMasked (every other Tuesday) will be doing an in-depth features vieo also but not covering what Big D does. *Spoiler Alert: The most overpowered:RMS power rated Kicker has made since the XS50 & XS100 :D Livin' Loud (and clean), Baby!

[@CoreyBrainard]

Between us and 5 stars video I can already tell I'm going to be ordering one of these for my daughters car. I just got her a 2017 fiat 500 and I have some down for sound components for the front and coaxial for the rear and a set of nvx 8" subs. Can't remember the model number but there the cast basket w carbon dust caps. But I'm in the process of building the box now and I have an old school kxa 1200.1 I was going to use and buy a separate 4 channel but there's very limited room In the Fiat 500 so a 5 channel is going to be alot better option. I've always preached kicker amps to people but everyone always thinks of Walmart kicker so they've gotten a bad name, but high end kicker equipment is hard to beat for Sq installs. Now if your just trying to move alot of air there are better options but if you want good clean audio there definitely in the top 5 in my opinion thanks big D for another good video

[@wal]

Thanks for watching and commenting!

[@RJSDZNS]

Kicker coming in for the win! I want one! Waiting for the full DSP amps from RF though.

[@drewjohnson4794]

Forget it. Rockford is always overpriced. Not as bad as JL but guaranteed they'll want like 2 grand for 100x4

[@RJSDZNS]

@drewjohnson4794 No, they're not going to be that expensive. But they are going to be full DSP amps so they're not going to be cheap. But RF is expensive because they're high quality. I got no problem paying for that.

[@JayTR_10]

The LX line is definitely something that Kicker was missing right now to pair with their speakers and be competitive in the market today.

[@emii4233]

This amps looks similar to the old t series amps by Rockford Fosgate especially with the removable cover plate that hides the controls and wiring inputs...they also had bigger hardware allen keys

[@donjaun540]

Super nice.

[@yonielihudelcamporamirez4066]

un test de alphasonik 5000 wats mayem

[@TheGoodLoserDavid]

Wow desde cuando esta en español ❤

[@CoreyBrainard]

So u basically get a 1200 watt amp on the 4 ch side plus a 1000 for ur sub. This is a really nice amp, but I'm guessing it's going to be close to $1000

[@MarcusSandoval-kx2th]

$1200 😢😢😢

[@stickboslightning]

@@MarcusSandoval-kx2thwhat? Is that confirmed? That's just...no.

[@johnmyers5653]

@@MarcusSandoval-kx2th $850 is UMAP price

[@johnmyers5653]

@@stickboslightning $850

[@stickboslightning]

@@johnmyers5653 now that sounds more realistic lol. $1200 is STEEEP in today's market

[@vernonthompson3060]

Anyone know who does refurbishment work? Ive got a 1995 Punch Power 500m afraid to hook it until i get it at least looked at.

[@wal]

Repair (at) freemanscarstereo dot com or Shawnmking (at) Gmail dot com

[@dougmasters3875]

Hmmm, a worthy replacement for my old PDX-V9 if it ever dies.

[@wal]

Agreed!

[@Rustyrider-og4pf]

Better run this on the quad box

[@HeliVabrik]

Hey Big D Wiz! Love your videos! Would it be possible for you to test something available on EU market? We have this STEG Niko 40000.1 (Italian brand) amp for our project, but we haven't had a chance to really push it. We also are the resellers here for STEG brand and would really like to have a physical proof of that amplifier pushing those numbers. If you are interested in making a video, please contact me, maybe we can arrenge something with the shipping of the amp. Greetings from Estonia!

[@floydwilliams3321]

Nice

[@johannjohann6523]

It's about time somebody offered a "Control Center" to adjust your amp instead of using a stupid cell phone. Still don't own one. And I'm still alive, imagine that. With todays tech every amp should something like a "Control Center" and/DSP. Even if the DSP works through your cell phone. That should be standard on most decent amps. You can get a DSP circuit for $15 off TEMU.

[@el_tate]

Would be nice to know the DAMPING FACTOR, to see if it is truly a beast!

[@johnmyers5653]

you can see all the test measurements on the bottom of the amp page for each model. Click link for whitepapers under specifications.

[@rideordivekerry4830]

2 of these for an SQ build would be awesome

[@SHAYDEE3]

Man I'm an old school class ab bipolar outputs triple Darlington amp guy, no turning back for me...

[@chiefgeek2020]

Anyone ever tried to dyno a Wet Sounds Synster line of amp (SDX-4 or SDX-6)? They seem to be the only marine amps left that claim to do 300+ RMS / channel.

[@JakkiPi]

Probably better to say "ethernet style" cable. That's barely a Cat3. It's not twisted. I usually replace these flat cables with a real Cat5e TP patch cable because you don't get interference noise like you would with a flat cable.

[@johnmyers5653]

This is all switched in the digital domain. No audio passes through the Cat5 cables. There is no chance for added noise.

[@Adam-nv9zo]

But do it bump doe?

[@wal]

2nd part with the additional tests and bass knob / controller info

[@darreng2639]

Man I bet kicker loves you with those great results 👏

[@toma.cnc1]

RJ45 connector if 8 pins, RJ11 is 6 pins.

[@fanatic26]

While the power is great, everything else about the amp is telling me "hell no". Im not paying for RGB like its a 12 year olds computer case, I dont care about flipping panels and covers. They all add cost that I just refuse to pay. That whole extra controller thing? Dont need that either. Its all just a waste of money.

[@mrjcanada5843]

Dyno the Timpano Amp

[@thatguykai479]

Everything but my girl Tiffany god dammm it

[@wal]

PROS and CONS in the 2nd part but yeah Tiffany gets no love

[@edd7299]

PLEASE DYNO A CROWN XLS DRIVECORE 2 AMP!!!!!!!

[@ramseyspencer1243]

Memphis did this 8 yrs ago with the VIV 900.5 I guess that patent ran out Same amp 😢

[@wal]

I doubt you can patent magnetic covers 🤷‍♂️

[@johnmyers5653]

am not sure i understand. What patent are you referring to and what did the Memphis do that this does besides selectable LED color? It is less power and did not have the remote control center. No disrespect, just wondering.

[@andrewmitchell2666]

Thank you Thank You Thank your to kicker. Beautiful and innovative. (Even though the control center should be an on hand’s device)😢 This is what I’ve been waiting on! Hello JP👋- are you listening? Now that’s a 2025 car audio amplifier. Plexiglass and fancy colors does not an amplifier make. Thanks again guys, great job.

[@geminidefect]

🤤🤤🤤🤤🤤

[@tatialo37]

Dang! Mo' powa' Youd beyter have speakers that can handle this!!!