⚡️MAGNETIC⚡️ - Making A Magnetic Leather Money Clip - Leather Craft

In this leather craft video I show my process of making a magnetic tooled leather money clip from start to finish. This money clip holds cash via two powerful Neodymium magnets that are sandwiched between two pieces of natural vegetable tanned leather. The outside of the money clip is tooled with a basket weave pattern and is hand stitched together using purple Tiger threaded that matches the purple dyed basket weave accent colors. The edges of the clip are beveled and burnished by hand, and the surfaces have an antique finish applied to help give the clip a vintage look. I hope you find this little leather project interesting and enjoy the creation video.
👇See below👇 for a full list of the tools and materials used on this project, as well as the basic leather dimensions.
What is the Gospel?
• What is the Gospel? | ...
Check out my work on my Instagram account .
Follow me at:
/ kingdomgloryleather
Dimensions:
- Outer (Tooled) Piece: 5-1/2” X 1.5” (140mm X 38mm)
- Inner Piece: 5-1/4” X 1.5” (133mm X 38mm)
Materials:
- 1.5mm thick natural vegetable tanned leather.
- N45 Neodymium Magnets (2” X 1” X 1/16”) (51mm X 25mm X 2mm)
- 0.6 Ritza Tiger Thread, Purple
- Fiebing’s Purple Leather Dye
- Fiebing’s Black Pro Dye
- Fiebing’s Black Antique Finish
- Fiebing’s Mink Oil Liquid
- Bee Natural Leathercare RTC Sheridan Resist & Finish
- EcoWeld Contact Adhesive
- Water (For initial edge burnishing)
- Tokonole (For edge burnishing)
- Scotch Brand heavy duty shipping tape. 1.80” wide
- Paper Towels
- Cotton Swabs
- Round Cotton Pads
- Wool Dauber
Tools:
- TechTools 12” T-square ruler
- TechTools 12” Cork backed ruler
- Husky brand box cutter
- X-Acto Knife
- Scratch Awl
- Craftool #X502-2 Basket Weave Stamp
- Craftool #C770 Camouflage Stamp
- 4mm wide piece of wood (For basket weave guide lines)
- KS Blade Punch 4mm Diamond Pricking Irons
- Craftool Pro Burnishing/Sanding Machine
- Owden #1 edge beveler
- Wooden Slicker
- Craftool wing dividers
- Bone Folder
- 1/4 round punch
- Airbrush
- 1” foam brush
- 5oz tack hammer
#kingdomgloryleather #kglwallets #kgltooling #moneyclip #leathertooling #leathercraft

[@KingdomGloryLeather]

What is the Gospel? 👉 kzbin.info/www/bejne/gZ6ui32uaqafjbs 👈

[@re4mdjd]

Are you planning to add Bible recovers to your repertoire? Providing it as a service?

[@jasonhughes3568]

Beautiful!

[@KingdomGloryLeather]

Thank you!

[@ToshaViktorovich]

Вот смотришь на это и процесс кажется таким простым, но если сам сяду - нифига не получится 😂😂 Отличная работа) Просто шикарно)

[@KingdomGloryLeather]

Я обнаружил, что большинство моих идей по изготовлению изделий из кожи кажутся мне простыми, но как только я начинаю над ними работать, они становятся намного сложнее, чем я ожидал.

[@mirtaferrari4675]

WHAT A NICE COLOUR!!😍

[@KingdomGloryLeather]

Thank you.

[@viviancovington7813]

Very cool 😎

[@Robert-xp4ii]

Looks great! Nice job.

[@KingdomGloryLeather]

Thank you very much!

[@johnhull2941]

what a cool project i love it must try it thank you for sharing

[@KingdomGloryLeather]

Thank you. It is a fun project, go for it.

[@michaelrussell9890]

Absolutely beautiful no doubt! I have to make one now!!!Lol!!

[@KingdomGloryLeather]

Go for it!

[@m1guellopez7429]

Wow 🤩

[@KingdomGloryLeather]

Thank.

[@gregorywoodbury7415]

Very nice! God bless and thanks for the video.

[@KingdomGloryLeather]

Thank you !

[@catchandrelease6196]

Very nice work. Love your editing as well - always nice vids

[@KingdomGloryLeather]

Thank you very much!

[@sachinrv1]

simple and useful

[@KingdomGloryLeather]

Thank you.

[@freestyleleatherstudio5800]

Great video. Nice work.

[@KingdomGloryLeather]

Thank you very much!

[@madisonham5384]

That wallet snap to the music was clean

[@KingdomGloryLeather]

Haha thanks.

[@victorcolon364]

Man, that’s nice!

[@KingdomGloryLeather]

Thank you very much 🙏

[@victorcolon364]

@@KingdomGloryLeather I’d like to make one of these. Can you tell me where you got the magnets?

[@ness126]

Bello 👌👌👌👏👏👏👏

[@KingdomGloryLeather]

🙌

[@michaelrussell9890]

Wow I just bought 4 of those magnets wow!!! Going to have to charge more than I thought!!

[@KingdomGloryLeather]

Nothing is cheap these days

[@michaelrussell9890]

Absolutely!! I agree

[@michaelrussell9890]

Really thank you for the great ideas!! And as always you do amazing work! God bless!!

[@KingdomGloryLeather]

Thanks for watching and supporting

[@captainrosa7350]

What is the white paste you use for burnishing your edges? I've seen you dab that on in every video. I'm new to the craft, looking to learn more so I can create masterpieces like yours. Thanks and God bless.

[@KingdomGloryLeather]

Thank you. That is a product called Tokonole.

[@pmbbike]

Nice! Now make one from horse hide that can hold 12-14 cards and some cash. Then I'd buy one.

[@mikeswaim2670]

The purple looks great with the black. I just got and air brush. I see you just spray in your shop.

[@KingdomGloryLeather]

Thanks. I do all my airbrushing in my wood shop where I have my homemade ventilation station set up. It’s never a good idea to breathe in any dye particles.

[@sparksandchips]

What edge slicking fluid is in the small bottle with the fine diameter tube?

[@KingdomGloryLeather]

That is Tokonole.

[@GuiltyMalice]

Awesome piece, I love the purple and black. What is that stuff you use on the edges to burnish? The stuff in the needle bottle?

[@KingdomGloryLeather]

Thank you. That is Tokonole

[@GuiltyMalice]

@@KingdomGloryLeather awesome thanks for sharing bro. Your work is incredible.

[@toddg6548]

Are those Barry King stamps? If not, do you have a preference? Great project! You are the only person that I have ever seen air brush leather, lol!

[@KingdomGloryLeather]

Those are Craftool brand stamps. I don’t really have any preference. You can really control your dye amount well using an airbrush. But I also love the look of a hand rubbed finish too.

[@rojeliosalazar7713]

What kind of finish do you use for your money clips?

[@KingdomGloryLeather]

I believe everything is listed in the video description.

[@Basspiper]

Hi, can you tell me how you get burnishing cream in that little bottle that has the tip on it? Do you water it down. I bought some bottles but can’t figure out how to get the tokonole in the bottle.

[@KingdomGloryLeather]

I take the top off the bottle then squeeze it before dipping it directly into the Tokonole. I let loose the bottle and let it suck the Tokonole up.

[@Basspiper]

@@KingdomGloryLeather Thanks brother.

[@greenmango9436]

Where did you bought the magnets, I bought some but they are to weak when covered by leather

[@KingdomGloryLeather]

eBay.com

[@ToshaViktorovich]

Greetings. Which airbrush compressor do you use?

[@KingdomGloryLeather]

Not sure. Cheap set from Harbor Freight

[@mex700g8]

Where do u buy the magnets. I have searched the web and can't find that size. Would make great Christmas gifts. Thanks for the idea and good work

[@KingdomGloryLeather]

Thank you. I believe I’ve purchased them on eBay a while back.

[@mex700g8]

Thanks

[@user-ud7xb9sf5q]

Cool brother! What did you use the name of the tool chalice shape did what is called?

[@KingdomGloryLeather]

The stamp is called a basket weave stamp.

[@aaronrichards606]

What’s the measurements of the boxes for your basket weave?

[@KingdomGloryLeather]

The stamp itself is 8mm x 5mm

[@stimpymcwhisky8129]

So i tried making it to this specs. Used 4oz leather, the magnets from Tandy werent strong enough. The pattern i made didnt work.

[@KingdomGloryLeather]

I would make sure the leather is not thicker than 1.5mm. 4oz leather thickness usually starts around 1.6mm and up. I’m not sure what kind of magnets Tandy sells but I got mine from eBay.com and they are super strong.

[@stimpymcwhisky8129]

@@KingdomGloryLeather what are the dimensions on the magnets?

[@KingdomGloryLeather]

N45 Neodymium Magnets (2” X 1” X 1/16”) (51mm X 25mm X 2mm)

[@cd3845]

Awesome!!! where did you get the magnets?

[@KingdomGloryLeather]

Thanks. eBay

[@michaelrussell9890]

I’m sorry but where did you purchase your t square?

[@KingdomGloryLeather]

It has been a while, maybe Hobby Lobby

[@sairajgawas5331]

Man you are just awesome👏 I love your leather work. And i have seen all your videos. Brother please can i aslo get something like leather wallet or leather backpack... Anyway I just love your leather work. #love from india🇮🇳

[@KingdomGloryLeather]

Thank you for all your support. Sorry I’m currently not selling unfortunately.

[@niogel]

@@KingdomGloryLeather Please be sure to let us all know when you do! There would be many of us looking to acquire such fine accoutrements! Psalm 90:17 🙏

[@stimpymcwhisky8129]

Where do you get the magnets from?

[@KingdomGloryLeather]

Ebay

[@Him__3000]

Sweet work bro! What airbrush are you using?

[@KingdomGloryLeather]

Thanks. Cheap central pneumatic brand from Harbor Freight

[@Him__3000]

@@KingdomGloryLeather Gotcha! I appreciate the info! 👍

[@michaelrussell9890]

What airbrush do you use?

[@KingdomGloryLeather]

Not sure. it is a cheap airbrush from Harbor Freight

[@michaelrussell9890]

Love harbor freight!!! Hahaha!

[@beniaminratiu6966]

Can you make a video showing how to make a Bible cover?

[@KingdomGloryLeather]

That is definitely on the list.

[@hansleyollivierre8445]

$? Talk to hold box

[@amitpatel5822]

do you sell any of it?

[@KingdomGloryLeather]

Sorry I’m currently not selling anything at the moment.

[@shivavenkatesan4046]

Where to buy?

[@KingdomGloryLeather]

Sorry I am currently not selling. I appreciate your interest.