Angle Grinder Hack! Don't Throw Away the old Angle Grinder!

I installed a 220 volt blender motor on the broken grinding machine.
It's not as strong and fast as it used to be, but it can be used in small jobs.
If you like this video leave like, share and don't forget to subscribe on my channel.
Thanks for watching.
MY INSTAGRAM: / king_of_homemade

[@kingofhomemade]

Thanks for watching.

[@RofiqulIslam-nd8gu]

awtd

[@user-kp3mk9ft7p]

@@RofiqulIslam-nd8gu l UK

[@lehyokhau1822]

@@RofiqulIslam-nd8gu pm.

[@alexraphael7896]

@@user-kp3mk9ft7p jmj Kbhj

[@laurens661]

@@RofiqulIslam-nd8gu /

[@davesstuff1599]

So even though it can be used again it has a much smaller motor now with a real chance of catching fire, well done.

[@dakotaday3465]

You forgot to add 1. He made a dollar stretch further doing this than throwing it away 2. Its awesome to see some people still interested in engineering and electical technology trades. Tradesman are a dying breed 3. He dont give a fuck what you say, he's gonna do what he wants anyway lol

[@derdrolftesinn]

Even with original it broke. So for smal jobs it is absolutely great . Love it :-)

[@morkaubl9268]

That was a very clever troll video. I realised what you were making after just a couple of minutes, yet you kept me watching until the end because *surely* there would be more at the end.

[@mitchellpawlina586]

For someone who fix something that was broken, with stuff you had laying around, I think you did a fantastic job. For something that was broken , and now works, I think you hit the nail on the head.And if you need to upgrade it, I’m sure you will. Keep up the good work.

[@rc-huina8221]

Hello 🤗

[@mrhollywood1173]

LOVE THE GUARD on YOUR GRINDER .......... BRILLIANT !!!

[@thanhnguyenvan2298]

I had a lot of old pipes and rebar to cut up and from what I read kzbin.infoUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.

[@alansmith9814]

This should be titled 'Take a weekend off and build an angle grinder'.

[@ramonmesta4414]

pretty good hack my man . i guess a motor w/more power is even better

[@GOLDENWORKSTV]

This is what I'm looking for, very nice demo on repairing angle grinder. Regards from GOLDEN WORKS TV!

[@VV-ye6nq]

see this full guide kzbin.info/www/bejne/famwoJyGj7h8rNE

[@MichaelWTurner]

My first thought was, why the hell would I do that when I could get one for less than 20 bucks. Then I thought to myself, I just sat here and watched this whole video and it has 2.2 million views. Well played sir...well played.

[@SedoY_Ural_]

Вот именно так, американцы потеряли способность думать. Какого черта я буду это делать, когда я могу это купить... И я не конкретно про этот ролик.

[@user-vt6jv8yz4i]

@@SedoY_Ural_ Они практичнее нас. Мы готовы потратить несколько часов жизни, чтобы сделать пародию на то, чем был сей девайс до того, как сгорел. А они просто купят в магазине новое полнофункциональное изделие за небольшую сумму. Без затрат личного времени. Не, ну если кому-то в кайф возиться с железками, никто не сможет ему это запретить.

[@randymarsh8058]

now thats worth it ,ive got several layin around with a bunch 18 volt motor parts from cordless drills ect

[@sammorris2721]

Yeah! No. Got it, only the foolish mock the reaper. I felt my IQ drop watching this.

[@geromelim3704]

-99 IQ

[@OBENGPedia]

Amazing, old angel grinder become useful

[@isaacmadhavan]

"ANGLE"... and NOT "angel" (which means messenger of God)... :D

[@zafardurrani9544]

No doubt you are kind hom made, I like your idea Thank you for this video

[@georgedennison3338]

There IS a reason a side grinder, 4" or 9" version, has a small pinion gear driving a large ring gear. The reason is the necessarily small motor, (especially in a 4" grinder, which most people think are a direct replacement for 9" grinder. They are NOT.), needs to gain some RPMs, so it will have some torque. The gear ratio enhances torque, as well. If the manufacturers could get away with direct driving them, they would, since it would be so much cheaper. You have resurrected a good little Bosch side grinder as an underpowered shadow of it's former self. I did come up with a much better use for part of the side grinder, though. The part was the output shaft of a 4" side grinder I killed a few years ago. I don't know the brand of the shit-brown grinder, I found it in the trunk of a car at the wrecking yard, and they gave it to me when I paid for my car parts. It lasted almost a year, but it didn't have a spanner nut like most grinders, it had a large cup washer, and nut; like a bench grinder would. A few months ago, I bought one of those cubic manmade superstone grinding wheels, (hard enough to grind carbide), from China via eBay. The problem was, I needed an arbor for it. I planned turning one from round stock, but looking in my 'inventory' for a nut and washers to use, I ran across a couple of output shafts from dead side grinders. Because of the nut and washers, I first thought it WAS part of a bench grinder, then I recalled tearing apart a couple of 4" grinders I had smoked one day, because I wasn't up for wrestling with my 9" side grinder, but there was stone needing to be polished. I got it done, but I was down to my last 4" grinder, (and I've been hesitant to get it out, since!), though do still have the 4" air side grinder. After checking then for runout, I ended up using the side grinder output shaft as the basis for an arbor. They are good, tough alloy, but still machine easily. I turned the gear end of the shaft down to ½", then turned a bushing for the ⅝" shaft and 20mm grinding wheel. In the end, it was a much easier project to use the output shaft, than to re-invent the wheel, making one from scratch.

[@fernandlust532]

When RPM go up, torque goes down. M=(P*9550)/N. M in Nm, P in KW, N in RPM.

[@user-ps6sp2rx4g]

Тоже со старой машинки сделал то что увидел. Если дать мощно е питание, всё отлично, но от аккумулятора не тянет. Вобщем убил время. Проще купить аккумуляторную машинку и не парить мозги

[@davidwillard7334]

So WHAT ! DID ! ALL !! THAT !! PROVE !! THEN !!??

[@georgedennison3338]

@@fernandlust532 Not so... Look at graphs of torque curves for electric motors to disprove your statement.

[@andrewjschutz]

@@davidwillard7334 ya goof lol dude clearly knows what he’s talking about and besides, some nobody on yt telling someone who’s spreading good ideas at the least has no pull😂👍

[@thegeneral3094]

Fantastic work my good fellow. Keep it up

[@sarfarazahmed2022]

Good for polishing and buffing,

[@prithvirajkanne]

Very good experiment. You succeeded. All the best. Keep doing more. This tool will be very useful in emergency situations. It's better to use it like this than throwing it in trash can. Spending money in replacing the internal parts like motor is very expensive. It's a good try. You have succeeded. Don't listen to the looser's words, they don't know what to do, how to do. Even if they know rocket science, they will simply eat and comment others. Don't listen to them. Do whatever you like. You are born to live your life.

[@rhsking05]

This video is a representation of your life.

[@elisavvasile5710]

Super. Felicitării.

[@basher_9754]

7mins of my life I ain’t getting back

[@BaDahl]

Agree

[@vitaliivitalii7763]

С такими оборотами пластилин только пилить, да и ножовкой быстрее будет, чем на видео шпильку грыз этой "болгаркой"

[@user-gu4ky2iy1i]

Я один вижу. что отверстие просверлено не по центру? И что ножовой можно распилить болт быстрее?

[@kostyadazel7010]

и я вижу

[@Bukamacho]

я такое делал но соединение редуктора от болгарки к двигателю произвел гибкой сцепкой через пружину без сверления пружина надевается на вал редуктора болгарки на двигатель сделал пластикавую вставку такого же диаметра что и пружина пружина распирается между валами и дает хорошую сцепку с возможностью пробуксовки в случае заклинивания например пилочного диска в дереве что очень удобно + нет вибрации и биения, удачи в эксперементах движок лучше заказать с али 775 например или еще мошьней те что в шуриках слабоваты и обороты маленькие))

[@ZaftDima]

@@Bukamachoспасибо!

[@csabilibu]

Good job! Thank you for video!!!

[@capchassuck]

Dewalt almost never dies ..

[@danielcarcamo6336]

It's a heavy duty tattoo machine 🤣💯

[@Dutcharmytent]

The torque on that motor adapter screw will tear out the way we lean on the grinder at work.

[@SPICEVlogPh]

nice good idea to make this good job sir

[@rc-huina8221]

Thanks 🙏 My friend 😊😊

[@charliem5332]

You just fixed it!

[@sivakaruni9883]

Good job bro keep uploading videos all the best 👍👍👍👍👍👍👍👍👍

[@charlestoweh1613]

The angular adaptation seems to be useful for something like a small, and I mean really small wind generator

[@Shadobanned4life]

Your dedication is admirable. You have the drive and the skill. You need bigger and better projects-take a chance!

[@eduardomachado6431]

Ótima idéia!

[@jayeshrawal5250]

Nice job bro !

[@kingofhomemade]

Thank you bro!

[@RussianCuban1]

I give you a like for trolling and bloody tears from the eyes of Bosch engineers...

[@persistentprogress3225]

You've not only wasted your own time sir you've also managed to waste all of our time as well.

[@mitchellpawlina586]

Treats Boogie If you feel that your time was wasted, then never watch KZbin again. Because you are going to find things you definitely don’t agree with. The guy used his ingenuity and fix something that was broken, I think that was the point. Any person with a half a mind, would put a bigger motor in it. Just relax a little on the hating.

[@persistentprogress3225]

@@mitchellpawlina586 lololol writing me was a complete waste of your time

[@mitchellpawlina586]

Treats Boogie And so was your reply a waste of your time.

[@vaquero3578]

@@mitchellpawlina586 & Treats Boogie you both just wasted your time commenting & replying to each other...and I just wasted my time pointing out your waste of time. this could go on forever lol

[@rc-huina8221]

Hello 🤗

[@gilfredooquendo8731]

I can see my self building a trolling motor 😛

[@user-sp3yn4gm8v]

Браво мастеру.👍😊

[@donalddarnell7467]

If he had a grinder he wouldn't have needed a hach saw for that. Lol.

[@pesho9971]

A manual saw has a thinner blade and can make more precise cuts(depends on your skill)

[@boblewis5558]

WHAT was the point in that? Was the original armature screwed? The replacement motor is WAY underpowered for the job though! An angle grinder should run from around 10000 to 16000 rpm. That motor sounded like it was barely making 3000! BAD move!

[@user-dq1fs7de9u]

Смотря для чего использовать , например газонокосилка .

[@robertwood3970]

My thoughts exactly. Took a broken grinder and turned it into a broken grinder 😳

[@chrislingham757]

Very good and useful to have 12v. Grinder can even plug lighter socket

[@boblewis5558]

I have an 18v grinder and while useful it is NOWHERE near the power and capacity needed for big jobs. Most mains powered 115mm and 125mm grinders are around 500-600 watts that means over 40-50amps at 12volts! Even heavy duty lead acid car batteries are not going to last that long at that rate!

[@ObsidianFrog]

The point of that abortion, is he's made several thousand $$$ from the amount of views he got from us suckers watching......

[@lucktriangle]

Очень хорошо наложить новой смазки на старую грязь!

[@SpeedomusicSM]

Good for light sanding

[@ws2228]

BRAVO !

[@artsofchance6400]

12volt dc motor 775 is designed for light duty application such as act as part of component of any machinery. this motor itself will fail to carry peak load in compliance with factory specification not only that but also motor seems to be loosing its life very soon if engaged to such heavy duty application.

[@TechTricks786]

Good work

[@kingofhomemade]

Thanks for watching 😊

[@pauloinventostube7533]

Ficou das boas !💡👍

[@billybobb7252]

Mr Tosser is in the house.. again!

[@daryletoney8118]

You're having a laugh!

[@user-fs2lk7vj8t]

Я сделал так с питанием от аккумулятора шуруповерта,отлично работает,режет уголок 50 , но недостаток-по причине вибрации моторчика расшатываются его контакты и питание от аккумулятора исчезает.При интесивной эксплуатации хватает на 3 месяца работы.Также испльзовал в качестве сучкореза в саду,применял диск БОШ по дереву.

[@savneetsinghrairai6823]

I got same old grinder ..I got new but good idea to make it 12v dc grinder....is this motor 775...it's my favourite dc motor high power n rpm low cost reliable..😊👍🏽👍🏽

[@johnathankelly939]

I think the bolt was worth more than the grinder 😆 🤣

[@user-sp3fr3si3y]

جيد احسنت 👏🌹👍فقط ملاحضه يجب ان تكون قدرة المحرك اكبربقليل

[@ScareCrow413]

Took me awhile to figure out why he cut the original motor off, when he could have just unbolted it from the inside. He must not have a motor with a matching pin, with a long enough length to replace it.

[@Al-Qurmuti]

From now on, i call you the "Middle finger kid"

[@jhonfredynaana7893]

Sigue esforzandote. Algún dia lo lograrás

[@jblcontrol28crossover76]

How many watts was the motor you took out? The motor you put in needs to be about that same wattage if you expect it to do about the same amount of work.

[@davidmuchoki1489]

I can't see the video for opening a padlock...do you have it?

[@gorgojoverdadero]

ahora tenes una amoladora en slow motion , felicidades

[@kapahrt3424]

good idea

[@alikaba4386]

elektrik bağlantısı için kullanılan devrede açık kablolar var onları izolasyonla kapatmak gerek

[@tannermartin7263]

Funny as Im seeing this and I had found my grinder in the shop yesterday and it was dead lmfao makes sense its just the motor that fried everything else thoigh work fine for a while

[@markrankin9205]

As waiting for that power supply to hit that vice and have big fireball

[@yavuzturan6704]

Mükemmel eline emeğine sağlık usta teşekkür ederim

[@markmichaud9517]

They call me stumpy now. I got no more fingers to pick my nose. 🤧

[@hsnkrm2916]

Kreatif dan inofatif....

[@johntilbury2097]

wonderfully creative and great video, But HF's cheep throwaway was $11 last week. and if you live where there is not one, I think they ship for $6

[@evaork3746]

Thats a powertool👍

[@johnconnersmithllc6095]

I made a giant fan one time out of a weed wacker motor. That thing was crazy insane. The thing to blow across my whole house and take everything with it . When it finally spent itself off I was thinking God how I knew about the danger of the Ark and had it pointed the right way. F****** thing went right through the wall just above the cat litter box. If my girlfriend's cat would have been there he would have been cut in 2

[@jackmehoff4165]

Instead of putting a new motor on it, just put the angle gear section on a high speed drill.

[@XHmotor-Emma]

We specialize in producing this kind of motor.

[@seregahalloween]

Из болгарки на 220 сделал болкарку на 220))

[@yogibeer9319]

The CIA should use this video to break down prisoners they are interrogating.

[@carpediem19999]

:) lol

[@markevard7157]

Spent hour or so doing that for a tool that's vibrating and might last a week.

[@user-pf2ss1bl5s]

Для вентилятора пойдет движок но не для болгарки

[@joelyons2962]

5 stars for effort, but 1 star for practicality. I think I might be able go get through that bar with my tenon saw quicker. 😅

[@user-pl3tz1rm5g]

Мне интересно,как ты нашёл центр на отпиленном валу редуктора?

[@marlennery9528]

Tienes la ideal pero no es la misma potencia yo lo quise aser con el.motor del taladro y no da las mismas revoluciones asi q cada cosa con su cosa pero es bueno pq asi ya nadie mas lo va a intentar

[@johnconnersmithllc6095]

The whole time I thought you were going to make some kind of electric boat motor out of it or something

[@SergeyPRKL]

me too. because i did exactly that.

[@rafaelavilaperez9575]

Esa es mi verdadera historis

[@rafaelavilaperez9575]

SI DESGRACIADAMENTE fui jakeado

[@rafaelavilaperez9575]

Yo no hice nada contra nadien

[@cuteedits8411]

Thanks you

[@peterduxbury927]

Original Angle Grinder probably only needed new brushes.

[@stevecarlisle3323]

The first item to wear out on a angle grinder is the bevel gear set.

[@CutlassOutdoors]

How to make a super-weak angle grinder toy, using only* an angle grinder! *(and 7 minutes of your life that you can never have back)

[@justinmacd859]

So happy o skipped to the end and saved 6:30 seconds

[@user-uc2in5gg7n]

Хорошая поделка ,из сломанной ушм, только не понял ,что за микро схема с канденцатором перевод на 12 вольт ,просьба написать,пригодится просьба не затягивать ,с ответом!!!

[@joshuamcalister4381]

If you have came to the comments first, welcome! You did the right thing. Please enjoy the comments and move on to the next video. There is literally nothing to see in this vid and you cannot regain the time lost viewing it.🤦‍♂️

[@jouhaed841]

Super Bravo

[@Professor4all99]

Good idea

[@manjunathg896]

Nice ineed need discription for this

[@jonneduke65]

Wow an angle grinder made from an angle grinder 😪

[@goss4444]

I think creating a right angle drill would be a better solution.

[@eokstwew]

amazing

[@viciriuctoader8406]

Ok felicitări

[@moisesmartinsdeoliveira8859]

Top ideia acho q um motor de interclima serio bom ele tem auta rotação tudo seri um teste qu ten um redultor na lixadera

[@Mike-sf7ex]

Great. Well now what about that blender? 🤔

[@nicstr28]

Anybody ever hear..."because I can"? Cant criticize folks for using their imagination regardless of results. He was "doing" while we are utubing.

[@vahteddineker8701]

Metall eş testere si ile daha çabuk kesilir çünkü motor zayıf veya çok küçük çapta disk kesici taş takılır sa olabilir

[@user-zf3mx1dc7j]

Пришлось пилить ручной пилой, потому что болгарку разобрал.

[@VV-ye6nq]

kzbin.info/www/bejne/famwoJyGj7h8rNE

[@rafaelavilaperez9575]

Pues yo me dedico a la mecánica de carros de motoneta de 4 tiempos yo me gusta trabajar no dependo de nadie mas k de dios nuestro señor y no hago mal ha nadie nos jamás haría danos ha nadie ni siquiera aun animal porke yo pienso k un animal tiene más sentimientos k todas las personas k me kieres dañar

[@arjostv8397]

Nice music (headbanging)

[@user-tj9lb1yc4c]

我改了牧田的 用895馬達 12-24V 還可以 中心鑽的下 側面很難鑽 所以用亞焊 焊死

[@emanikebiz]

LA IDEA ESTA GENIAL PERO CON MOTOR BRUSSLES SERIA PERFECTO

[@mikemoss4687]

Well that was the best I hear you can get a brand new one for under $20 and I believe it comes with a couple of discs an cord to plug-in the wall and a variable speed switch thats a lot to ask for for twenty bucks

[@jflemmingjf]

And and and... a safety cover...

[@mikemoss4687]

I knew I forgot something

[@rafaelavilaperez9575]

Hola como están las cosas aya afuera por k yo he sido completa mente jakeado que tipo de bromas están aciendo conmigo

[@rafaelavilaperez9575]

Todo el mundo lo está haciendo menos yo yo no se k esta pasando solo se k me tienen amenazado k me kieres encerrar en un pinche anexo de mierda donde te matan de ambre te tratan como un puto insecto eso k isieron haser con mi vida destruirme k todo mundo lo sepa como ya lo saben yo ni sikiera he sido difamado jakeado humillado pero no me crean un pendejo