Wooden bath

[@solarcarrot]

As an amateur with woodworker, i typically feel overpowered with the entire arrangement kzbin.infoUgkxrYREG3-7f1Aqk9ams3ZESRNzGnfdUtyQ . Be that as it may, this arrangements drove me through with much clarity and effortlessness woodplans. Works i now work like a genius. That is great!

[@kennethkrabat]

A Danish barrel maker company now specialising in wooden bathtubs realised after 10-15 years of trying all sorts of wood that TEAC is the only sort, which would satisfy quality demands in the long run. Thanks for being an inspiration here. Best, k

[@RynoTheMagnificent]

I love your courageous approach to this seemingly unapproachable (untested) concept. Very well done! Gives us lesser experienced woodworkers some inspiration to dive into the deep end... so to speak. Thank you for your extremely detailed documentation - especially with the obstacles you encounter. Cheers!!

[@KingPostTimberWorks]

+Ryan Scott thanks. It was a bit of fun. And still works just fine too.

[@yak-namwang5032]

Beautiful work! We found your channel while doing research for our bathroom sink build, which we will make from walnut. Thank you so much for being honest about your mistakes - I think we learned more in this 20 min video than in the past 4 months of planning! You also may have saved us from making a big mistake with our choice of epoxy.

[@KingPostTimberWorks]

+Yak-Nam Wang cool glad someone can take something away from it. Would like to see what you end up with too.

[@yak-namwang5032]

After 6 months have the sink finally done! I don't think I can post pictures here. Will try to do it via instagram. Thanks again for being so generous with your knowledge!

[@drmkiwi]

You are a beast! Looks great. Somewhat daunting project to take on and you won. Great at last to see how it all came together. Thanks.

[@PingMan007]

Looks great Joey. You know this will start an avalanche of DIY wooden tub videos now. :).

[@KingPostTimberWorks]

hope so,,,

[@ronbumgarner3589]

Well done, beautiful tub. 20 years plumbing, 45 years working wood. WELL DONE...

[@doug.ritson]

Very cool project Joey. Really look forward to your house build because I know there will be plenty of custom mods. Thank you so much for sharing.

[@prenticepreneur6985]

Really cool Joey. I especially like your use of CNC and the way you measured the bath to your body and preferences.

[@KingPostTimberWorks]

+The Apprentice cheers, you don't get that in the shops!

[@sanjaysami4315]

Incredible work. Don’t know whether to feel inspired by your work or disheartened by how far I am from getting there.

[@duanedickey3619]

Absolutely beautiful! This inspires me to do more-bigger and better projects. Thanks for taking the time to show us your process.

[@KingPostTimberWorks]

+Duane Dickey cool cheers

[@irecruitu6128]

I've said it before.... best woodworking channel on youtube right now in my opinion.

[@KingPostTimberWorks]

thank you!

[@paulbaker2776]

I don't know how you can pick one. There are so many goods ones. But this one is definitely great.

[@KingPostTimberWorks]

thanks , I think my audience is pretty smart so try to keep talkie talk to a minimum. cheers

[@mashirjamaidi8396]

KingPost TimberWorks briliant

[@johnscott4118]

Guys I am learning woodworking at *TopFineWoodworking .Com* I recommend this website all you guys who are beginner or advance in woodworking

[@cvanzyl73]

Jeesh, nice job man!! Love that you just went for it and figured it out as you went! Turned out spectacular!

[@andrelicas2067]

Awesome and inspiring work, great video and so fab to see the family adding their bit too :)

[@leosway4320]

Great job, but in the future, use cabosil fiberglass filler with the epoxy to fill in the gaps. it'll add strength to the joints. It mixes up like a paste and will not run and ruin the pieces you're working on.

[@howardhagadorn9443]

I'm green with envy......... It's absolutely beautiful. If I were a tad bit younger....... but I want to be able to get back out of the bath after I get in it ha

[@KingPostTimberWorks]

Ha, cheers

[@beautyschoolbooks]

Spectacular thank you for making this video. Thank you for also advertising the "orange washing vans for street people in Australia.

[@KingPostTimberWorks]

+Robyna Smith-keys um not sure what you mean

[@AngelLuisTrinidad]

I wonder if that tub can double as a boat? Definitely, is a piece of art.

[@happyface7342]

Angel Luis Trinidad You should have used a belt sander to take the roughness out, then a small block plane for finshing, finally using a thumbscrape

[@berthawarren6921]

Yes

[@MaximGhost]

It does look like an ancient Egyptian coffin which they would float down the Nile. (Yeah, I know Egyptians don't send off their dead like vikings do with a water burial.)

[@musamor75]

@@MaximGhost Oh yes they did- not any longer. There were beautiful burial boats, used to cross to the "Other World".

[@cobberpete1]

Definitely the Artist... VERY well done, I was going to ask if it was for a client, but you answered the question. A little bit backwards, build the bath before the bathroom :D :D New addition to the shop.. CNC, hopefully you will get a lot of work for it, although to look at it from a different perspective, you can now take on work that would have been difficult and time consuming . Thanks Joey great video and very original.

[@KingPostTimberWorks]

CNC is in my workshop but is my father in laws toy. but sure is handy to have around

[@angymede]

Por fin¡¡¡¡¡ alguien que hizo un tutorial bueno, es excellente, se lo agradezco mucho, la voy a hacer me encantó reciba un afectuoso saludo desde el Ajusco México

[@GregsGarage]

Fantastic. The world's biggest segmented bowl! Seriously though. Great work as always.

[@KingPostTimberWorks]

thank you

[@badassbren1]

Love the game controller on the Cnc machine. And of course love the workmanship ( and workwomenship) subbed!

[@TrustNotta]

Lol. The best part is when you had to wipe the sawdust off your glasses with your fingers so you could see. Classic. I've always hated using a grinder on wood for this reason. Nice job.

[@harrykourm2462]

Good work! That CNC machine made your life easy

[@rodbinder3789]

I was curious. With access to a cnc machine like that why didn't you cut each level on that and then epoxy them together?It would have saved many hours of work.

[@KingPostTimberWorks]

+Rod Binder hi, possibly would save time if I wanted to make a few baths. Though its not as easy as it sounds to do that on the CNC . It poses it's own problems etc. But mostly I wanted it to be more of a sculpture.

[@rodbinder3789]

this I understand. I plan on making a kitchen sink and bathroom sink using a log and a grinder with a wheel is actually a small chainsaw chain for a tinyhouse I am working on. I also understand about working in 3d. I have been involved in that since we had to work in dos. Which I still do for some of my modeling. Anyways I didnt mean to slight your work it is beautiful. I can only imagine how many hours your worked on that tub. THanks for sharing the video. Rod

[@KingPostTimberWorks]

+Rod Binder all good, sounds cool!

[@christopherstube9473]

I used to draw saddle trees in Rhino 5 and slicing it by level is relatively easy once you have an accurate three d drawing. And it converts easily to g code. We were cutting them out with a cnc in spruce because it made the leather workers life easier when they had a consistent shape to fit to.

[@jamesmitchell5013]

One things for sure, no one else will have a bath like yours! Nice work btw.

[@1Odama]

For the inside probably would be better with fiberglass and epoxy similar to the surfboards. Also, you may use a semi-flexible grinding disc to finish off round surface inside. Thanks for sharing your ideas and mistakes! Great to watch cheers

[@josephmiller7282]

A family that woodworks together, stays together!

[@Erowens98]

You shoyld have considered using fiberglass mesh to seal the tub, they are used in boat building quite often and in my experience are easier to apply than several coats of epoxy.

[@AddictedtoProjects]

Very nice work. I really like that bath. And good on your for being so honest about the mistakes you made along the way. To be honest, as this was a prototype, try not to be too hard on yourself for making mistakes. It always takes 1-3 test runs before really know how to make a particular component, so the is all part of the game. Well done sir! =)

[@KingPostTimberWorks]

cheers !!

[@donfinch862]

Luv it! And off the top of your head, well done. Inspirational

[@leodrake252]

wow,something i would like to try but you did a excellent job which beats out me and all others who havent done what you have created,just awsome

[@KingPostTimberWorks]

+leo drake cheers

[@nitramretep]

I am amazed the blocks held with the resin/glue and no clamping or mechanical bonding. You have really surprised me!

[@KingPostTimberWorks]

+Peter M me too, because epoxy is gap filling the pieces don't need to be super tight.

[@PtrOBrn]

I think the only other way to do it would be to make the rings and then you can add a couple of loose tenons to join the rings. With rings you could use a jig to line the up and strap to pull them together... maybe.

[@maxdondada]

I thoroughly enjoyed this video from beginning to end. You've gained a new subscriber.

[@KingPostTimberWorks]

+Max Jerome cool thanks

[@barryedwards2865]

Great job Joey, beautiful work.

[@kaelinlariviere6523]

Absolutely beautiful and you answered a few questions I've had after seeing similar baths. great job man.

[@KingPostTimberWorks]

+Kaelin Lariviere cool cheers

[@ishalgen3224]

Brilliant job , Looks awesome!

[@RafMatthyssen]

Great job! Great musical tastes too, I heard some good ol' Bad Religion playing in the background! 🤘

[@KingPostTimberWorks]

yup love em,

[@leksey7870]

This is awesome! Wooden bath is a charm!

[@jgetscensored7837]

This is one of those random stumble across KZbin algorithm glitch things… But now I want a wooden bath tub. I don’t even take baths. I strictly shower. But I want this thing.

[@mmanut]

Need to apply many coats of gloss epoxy & will never leak. More the better. Leave tub on it’s side and apply epoxy while each area is laying flat with gravity, no sags this way. Every few hours just keep flipping the tub. 👍👍 Vinny 🇺🇸

[@Freakybubblepig2]

Wow, love this design. I'd love to recreate and play around with this idea, would be nice to have at home. Subscribed!

[@SmithMr1256]

Your MISTAKE was that you made it too small. It is so beautiful that your loved-one could not keep from wanting to join you for a candle-lit bath!

[@BigMeanyVids]

Pretty cool. Lot of work for sure. Good job

[@a6cjn]

That's a lot of work but unique pieces usually are. Very well done, most impressive - again!!! CNC eh? I really look forward to see what you come up with using that combined with your superb traditional skills Chris

[@KingPostTimberWorks]

CNC is in my workshop but is my father in laws toy. but sure is handy to have around

[@mauricioreyes9756]

Maybe a layer of fiberglass inside to reinforce. Like a surfboard, equally exelent work

[@annamamo3645]

And ruin beautiful cedar with fiberglass? It's a sin!

[@roboslug7582]

It doesn't ruin it if you apply it correctly. Wooden boats are often given a layer or two of fiberglass on the outside, which is then brushed over with epoxy or urethane. Once you apply the adhesive, the fiberglass becomes clear and actually adds a lot of visual depth to the wood. It adds a lot of strength and because it's a continuous layer, it prevents things like the pinhole leak he got in the sidewall.

[@rogermccaslin6750]

You can find a leak using vacuum. Attach vacuum to the outside where you see the leak (empty tub first, of course). brush resin over the area you suspect to be leaking. Vacuum will pull resin into the leak. Even if you don't see it, the resin should seal the leak. You can also use a body filler spreader to move the resin around.

[@KingPostTimberWorks]

+Roger McCaslin huh good tip!

[@DarinWixon]

Cool. You should put a white boat gel-coat over the whole thing! It'll seal it up good!

[@sls2111]

Super cool looking. Very nice project.

[@ADHDbuilt]

I need to get myself one of those grinding discs, made it look easy! Tub looks awesome!

[@leapinglemurcraftworks6426]

Looks great. Now you just need to make it into a hot tub. I wonder if a Stanley 113 plane would have been useful on this? It could work on both convex and concave surfaces. Fantastic in the end no matter what. Scott

[@michaelhogan9053]

Cool! I watched guys make wood canoes and they fiberglass the outside, no leaks.

[@bill3641]

When he started using the angle grinder after the glue up of the perimeter I swear I could smell sawdust.

[@christopherstube9473]

If you thicken the epoxy with a some glass beads, it makes it more manageable when you are filling voids. We used to put a bit of sand on the top of skateboards because it did not show but gave traction.

[@hendryzulfian7980]

Idea yg gila tapi nyata yg gak bakalan difikirkan oleh tukang kayu dunia 👍👍

[@AndreaArzensek]

Holy cow! That's a great job!

[@KingPostTimberWorks]

+Andrea's Workshop cheers

[@aldoalexanderquispebecerra5241]

Eres mi gran Maestro Saludos desde PERÚ te admiro no sabes cuánto gracias por todos tus videos.

[@bengrant750]

The finish looks great!

[@PirateDynamics]

Bad Religion playing in the shop, nice!

[@jamest.5001]

that's a very nice tub. great work.

[@meanders9221]

Man I know how much work that is from having done similar "brick-ups" on a smaller scale for round and half-round table aprons. And they don't have to hold water, just have to get them smooth enough to veneer. Normally use some kind of lightweight but stable wood for the "bricks", such as white pine, and cedar should work too, never tried it. Anyway, it was gutsy and I bet it was a lot of fun and frustration, but came out beautiful!

[@jdog4534]

There's a company that makes inflatable ball and drum sanders for sanding inside curves. They cater to wood turners and carvers, and come in various sizes. They're all named after king arthur and stuff like that. ..guenevere, merlin, etc. Do an Amazon search of "king arthur sander" or something to see what they have. Great job on the tub. Nice video. Thanks for sharing

[@pierre5325]

Dear friends, I truly enjoyed this video. Thanks for sharing it. It was fun also, to see the Good wife and tyke! I guess I shall have to subscribe... can't stay away. Blessings to you all, pierre from New Mexico

[@ronh9384]

Excellent job. It turned out amazing! You two did a really good job!!! Dominos would of helped with the small pieces but that would of been a lot of dominos!!!! To bad you live on the other side of the world! Ron

[@corybeyrer1039]

Maybe a Kutzall grinding dish would have helped out on the interior of the bath as the have curved faces! Awesome video and project!

[@poe3ful]

Priceless amazing work with tons of love! :-)

[@cactustorso]

That looks absolutely incredible!

[@bobbybob3679]

Looks amazing! I think there is a major flaw though. If each block is not evenly dry I think hot and cold changes will cause the blocks to expand and/or shrink. It will crack and leak without question. Boats aren't made from tiny blocks and don't have to endure such high temperature changes.

[@More-Space-In-Ear]

Great build, well done 👍🏼😊

[@stephenpeterson7558]

I had a idea 💡 for the sanding you could use a multitool sander and go over all the lines first then use a marker and sand the rest like a turtle shell design until the marked lines lose their marks

[@Primm1171]

Man you did a fantastic job.

[@KingPostTimberWorks]

+Mike Primm cheers

[@masn1881]

Good work! I can’t imagine the time put into this... wow 😮 Again, good work!

[@christopherstube9473]

Nice project, reminds me of the Salish ocean going canoes. I have had very good luck sculpting with a carbide oriented strand wheel in the side grinder but the cutter you were using seemed like it was good.

[@amosluyk]

I would really like to know how this is doing after a couple of years of use... lovely project :)

[@KingPostTimberWorks]

So far so good

[@nathantonning]

This is a stunning piece!

[@Beowulf-sd5gh]

After watching this I consider making my own. I think it would be less tedious to do each level on its own as a oval and stack these up later... Thank you for the video!

[@onlineidentity6826]

This is a true work of art. Nice one !

[@greatplainsbow]

Very cool! However, if you have a cnc why didn't you machine the side blocks to to fit perfectly thus doing away with all the cracks

[@KingPostTimberWorks]

+Great Plains Traditional Bow Co. The cnc would not have helped in that way. The one leak was caused by lack of clamping pressure wile glueing. I was really aiming for this to be a sculpture rather than perfectly formed machine cut object.

[@joebleaack]

Great job man looks great

[@mangosmakemesmilee5164]

You might have found another sanding tool by now since this video is 6 years old, but wanted to recommend something used in on cars. 2 inch orbital sander/polisher (usually an air tool, but some electric ones exist), and an interface pad.

[@steveuzelac5807]

Building new bathroom now, how would you like to send it to Ga USA. Only kidding! , my bath is just shower , sink and toilet for handicap. Hats off to you and family, lots of patents Great job on tub, love to see what kind of house you would build . Cheers to all --Framerman. Yes even disabled I still do all work myself, Tile soon want to help?

[@jmdowdy]

Incredible job! Fantastic idea and very well done. Cheers!

[@Caralegall1]

Wooooow.. Im your Fan...Congratulations ..

[@KingPostTimberWorks]

+Caralegal Sp. Thanks

[@ArtfullyRogue]

very cool project! I had wondered early on in the video about how the use of cedar would play out, but managed it well and have a great finish piece. You have a sub out of me! Thanks

[@KingPostTimberWorks]

+Artfully Rogue thanks!

[@shanek6582]

I've got to build one now, wonder if it would be better to use two layers of wood but with staggered joints, that would be strong as hell and couldn't break or leak very easy.

[@shopshop-lx9hj]

so, after 18 months how is it holding up? One thing I've unfortunately learned is that epoxy doesn't stop wood from moving

[@KingPostTimberWorks]

So far so good. A few dents front the kids etc

[@Lounichias]

what kind of resin you use ? For my washbasin , i use gloss epoxy resin. It's perfect for flat surface but when the wood is vertical , i think your resin is better... thanks

[@hwhack]

Wow. That's just awesome. Google says that tub costs $8K. And you built that in your garage.

[@KingPostTimberWorks]

+hwhack Google's not quite right.

[@hwhack]

I live in Los Angeles. I've never seen something this awesome before offered in any of the high end stores. You might be undervaluing your products.

[@xiaochungu2109]

This bath is art of love is priceless！Google should know that such a red cedar tub in China is at most $800！Plus $200 for shipping, you can bath in your home in Losangeles！

[@user-karenforchrist]

Thankyou you gave me a lot of info to think about. I want to make a tub with a door and rubber seals😊

[@danbrit9848]

subscribed over that grate transition at the start :)))

[@KingPostTimberWorks]

+Dan Brit cool, I liked that bit too

[@kenmarapese9085]

Beautiful build, interior curves can be challenging.

[@MattWilliams7]

Great work Joey. The cedar does look great even if it is a bad combination with the epoxy (hindsight is a great thing).

[@juniormattos2448]

Congratulations from Brazil... It's a very nice job... Lol lol lol

[@agrippanyagwaya2308]

So amazing,I would like to know how many pieces of timber did you used to make the tub

[@stevebulach5198]

Well done Joey, absolutely beautiful!! :)

[@polovilla1958]

Sorprendente y Maravillosa tecnica de construcción Felicidades por tu Profesionalismo y conocimiento de la madera. Saludos desde la Ciudad de México :)

[@sharonrogles8301]

Do you take orders??? Beautiful!!!

[@gian534able]

I liked the big gun. Very funny 🤣🤣

[@samwise1989]

so good man well done. been wanting to do one for so long

[@UrsusKombat]

"EVERDURE Epoxy "... Woooo ! The skin of your child will love it

[@KingPostTimberWorks]

+KolbUrsus what's the difference in a fiber glass bath from a store?

[@UrsusKombat]

It's your choice man ... pas le mien !