DIY Speaker Build | 2-Way Side Fire Subwoofer Speakers

🔊Storyblocks Audio - www.storyblock...
👉 Buy The "Side-Fire" Speaker Build Plans! - gum.co/sidefir...
👉Tweeter/Mid Driver - bit.ly/PS95-8
👉Woofer - bit.ly/DS5paper
👉Free Speaker Build Plans - bit.ly/FREEplans1
📲FOLLOW
Instagram - / kirbymeetsaudio
Facebook - / kirbymeetsaudio
🎵MUSIC
/ tracks
⚙️ALL YOU NEED TO GET STARTED
Drill - amzn.to/2641yxs
Circular Saw - amzn.to/23iuCfx
Speed Square - amzn.to/23ivhgQ
🛠️TOOLS
Router - amzn.to/23isnJh
Router Table - amzn.to/28NaaHE
Router Adj. - amzn.to/1UUvwuY
Chamfer Bit - amzn.to/1UUvV0w
Mortise Bit - amzn.to/1ZYQ3An
Table Saw - amzn.to/28NdP8o
Miter Saw - amzn.to/1ZYQfQ9
Cordless Drill - amzn.to/2641DRD
Orbital Sander - amzn.to/1UUyU9n
Finishing Sander - amzn.to/1ZYSjrk
🛠️MORE TOOLS
Bar Clamps - amzn.to/28Neoz0
Soldering Iron - amzn.to/28NedUs
3” Forstner Bit - amzn.to/1ZYS8fz
Forstner Bit Set - amzn.to/1Upcayn
Measuring Tape - amzn.to/1UUxpb4
Push Stick Pack - amzn.to/1XwjV8U
Auto Center Punch - amzn.to/2643yG3
Digital Angle Gauge - amzn.to/28Nc0Zb
Combination Square - amzn.to/1XwkhN3
🎥CAMERA GEAR
Camera - amzn.to/1W5Pci8
Wide Lens - amzn.to/28NeQ0j
50mm Lens - amzn.to/1W5PR35
Microphone - amzn.to/1ZYU9II
Big Tripod - amzn.to/1ZYUv23
Flexible Tripod - amzn.to/1UUAwzX
🤙If you have any questions, comment!
I invite you to be a part of this awesome community.
Thank you so much for watching!
-Kirby

[@vasileiostsalkos6174]

I’m so jealous of all the people who can buy your speakers. I’m so proud for you for staying so humble though you are the name in the speaker building on KZbin. I’m so glad for you that you constantly search for greater sound with so much passion. Bless you mate.

[@MrMarnix1234]

I was really wondering what that side fire subwoofer would do, I'm disappointed that you almost never do an audio test after. Nevertheless, great build.

[@DominusFeles]

Not fair! Now you revived my fantasy on building a side firing speaker with a quite spectacular design. Only problem, I don't have the time nor the money - and have never built a complete speaker before! 😅

[@gerritduplessis7122]

THE WAY A MASTER OF HIS CRAFT WORKS..

[@alistaircochrane7121]

Let it not go unsaid - Kirby does excellent work.

[@KirbyMeetsAudio]

I appreciate that! Thanks for watching

[@Bagoesbudianto]

Woohhhoooo.... Got a nice KZbin notification before sleep. Finally I can sleep well now. And I had that speaker box but a little bit smaller, i will put my 6" woofer

[@markoduvall]

Hey Kirby, I liked this build, really clean. Hope you're doing well, sir.

[@Test-Pilot1194]

Love great, but would have glued the 2nd front baffle. The head of the screws not facing the same way would distract me 👍🏻👍🏻👍🏻

[@dannyvossebelt4488]

Looks amazing! Try to make a kind of boom box what you can take to the swimming pool.

[@palehorseone]

Beautiful building technique. I know firsthand the patience required... Well done, brother

[@KirbyMeetsAudio]

Thanks so much for watching!

[@ariskazis4663]

why don't you record some audio clip to get an idea of how they sound? :) cheers and keep up the good work with these videos!

[@felipemarinho1326]

what are the calculations for the enclosure?

[@jonathandilin5301]

Would love to see a budget build of the barefoot footprint 01. I'd pay for those plans.

[@ALPHONSO_NANOOK]

man this is awesome. to be loudspeaker builder is my dream job....

[@dawn9340]

The audio in your videos is A+, Paul McGowan has a thing or two to learn from you!

[@95lovi]

Nice build, for aesthetics you can use black anodized screws with a unique key pattern for the solid wood front applications. Would look very professional

[@nicholasbrown8384]

Beautiful build 🙂 I'm getting my PS95-8's soon and can hardly wait

[@jked7463]

Love your saturn rocket in the background. I watched the moon landing live and actually built that model in the 70's. Hmmmm.

[@AlphaMachina]

Man, this is fantastic. Love the detail and accents. Really, really well done.

[@gizmoknow-how2022]

Great job

[@GCustoms]

Beautiful speakers! Love the design!

[@thomasschafer7268]

😅😅im Leben nicht. Hässliche Kreuzschlitz messimgschrauben.👎🇩🇪

[@dam4274]

Table saw, drill press, router and table, drill, just to name a few. I use have that stuff. Now I’m 60 with the talent and the want but no money to do it.

[@zeljkostanisavljevic4665]

5:50 EPiC bro!

[@davekazoroski6548]

Gotta love them Dayton drivers!

[@a.k.m.manzurmurshed210]

Fantastic

[@englishsteve1465]

Nice to see that you didn't waste the round pieces when you cut out the holes for your tweeters. You made "nice" ear decor with them, well done.

[@xvariabledesign]

i really enjoy your channel. the hard part for me is getting a sense of sound quality in ALL speaker reviews. i realize sound quality is very subjective, but is there any way to compare to an off-the-shelf speaker for your review of sound quality? sound quality seems very personal, so it would be nice to compare to readily available equip stocked at common retailers as a reference point.

[@vasileiostsalkos6174]

Like even before I watch the video. You are the best worldwide you tuber.

[@cjmarsh504]

I love the speaker design. especially that walnut finish

[@LBCAndrew]

Walnut makes everything better. It has a very distinct smell when working with it as well.

[@eximiamedia7897]

Very excited to see these! Great work.

[@gerritduplessis7122]

AMAZING CARPENTRY WORK!! YOWR!

[@attainableaudio4533]

Always great to see a Kirby build!!!

[@leonking9459]

Nice workmanship.. but i wish you have made a video on how it really sound.. sound test in short..

[@emiliomaraganas5042]

Beautiful design.

[@beatsandbass1284]

Will you make a sound test?

[@KirbyMeetsAudio]

YES! Coming soon, keep an eye out! (or hit that bell ;) Thanks for watching!

[@maincharacter2677]

Kirby Meets Audio hurry up with that sound test will ya? I’m joking very nice video!

[@cleberarioth]

Sounds fake... No crossover, no sound test, no internal footage, I think he just build the wood part, probably not a functional speaker.

[@blazed85]

It's been over a year. Don't think it's coming at all

[@beatsandbass1284]

@@blazed85 did you see my comment is a year ago?

[@Grommet2007]

Looks nice, but there should really be a separate enclosure for the midrange speaker. Shouldn't be that difficult to add on to the existing build - just find a plastic tub or cup that's large enough to fit behind the mid, insert it into the enclosure through the hole you made for the woofer, and fasten it in place (glue, etc) behind the midrange. Add damping material in it for better results.

[@Grommet2007]

Ok, looks like I'm an idiot - I see in another page that they are already in two separate enclosures...!

[@davidantell2855]

Very nice. I saw a similar type front piece on a sub build and they put a thin layer of cork between the box and the front plate. Looked very nice and reduced potential vibrations

[@yttean98]

good effort, one thing missing what about the sound, no sound demo or verbal description about the sound quality?

[@wspolczynnik_poissona]

These look great. Love the aesthetics of your builds.

[@KirbyMeetsAudio]

Thank you!

[@AndreCapone2000]

More speakers of this type 😍

[@Ocunfurco]

Brilliant as always!

[@KirbyMeetsAudio]

Thank you!

[@aravindasandun7450]

Nice work

[@timschutte6924]

, I love side fire woofer speakers. I have 4 large speakers in my living room with this design with 8 and 10 inch woofers

[@Kerryhouseforrent]

Beautiful!!!

[@SuperSanch0]

I wanna make these but don't see the plans on your website?

[@f4phantomf4]

Great looking build! I would love to know how you set up the crossover....can you send a pic/or describe the crossover?(I assume there is a crossover). If not, how is it wired?

[@alcolavista-22]

Nothing but awesome job👍

[@hardcorecap]

gorgeous build like always, my dude

[@KirbyMeetsAudio]

Thank you!

[@timschutte6924]

Beautiful work. This is my all time favorite design. I'm gonna use this design with 61/2 inch TB subwoofers in a multi chamber design. The bottom part for the woofer is either gonna be a T-Line type or band pass chamber like Bose Acoustimas. The full range driver with be the Dayton Audio PS 95 copper phase plug ( full range driver) and a Fountek ribbon tweeter with the appropriate bass blocker. I will just run the full range driver and subwoofer straight. Not sure if I will put a 80 Hz bass blocker on the full range driver or not. Trial and error I guess

[@ingusmant]

Noob here, what the difference between side subwoofer and front ones?

[@timschutte8310]

, my home speakers are made this way. they are Theater Research. they have two 4 inch mid ranges and a one inch dome on the front and a 10 inch side fire woofer. they are 3 1/2 feet tall and about 14 inches deep by 6 inches wide this configuration works well. I'm gonna build these little speakers for my laptop computer. I have an SMSL small t amp that's 20 wpc / RMS. it should sound good. keep up the good work.

[@dylanBehrproductions]

Correct me if I'm wrong but I'm pretty sure that theater research is a white van brand

[@PanCakeMixer101]

those are some good lookin speakers, kudos!

[@miketan373]

Tnx for showing, keep up going! For the one‘s who wanted to see the separate compartments, look at 2:53, lines are drawn on the wood, and I think to indicate the place of the upper compartment... for me this is not important I am going to put the case in practise as an example for all the teachings - tnx Kirby - and design the case from the ground up. The same for the electronics inside.

[@dunbarad]

Any chance you'll be making the crossover specs available?

[@KirbyMeetsAudio]

Yes! Plans for this build will be up on KMAkits.com at some point. Subscribe to the newsletter if you want updates. Thanks!

[@jasonoliver3548]

Did you put a woofer on each one or just a single? I think it would've looked a little slicker without the brass screws... But maybe some sort of copper fastener to play off the cone?!

[@craigmonteforte1478]

Man I’m new to your channel and i am really liking it i had looked for something similar a while ago and there wasn’t any. Thing on KZbin. I’m glad i looked again and found the series ! My background is woodworking and i like good sound but dont have any formal training in it I am so happy that you are showing These procedures and have the plans that is exactly what I started out looking for originally

[@hififriend4512]

The wood is so beautiful 😍 and even the screws fit nice in this combo! What type of wood is this? (Rosewood?) I would like to use a similar one for my new speaker enclosure (full range MarkAudio CHR Champagne). Keep on going your videos are the best👍

[@KirbyMeetsAudio]

Thanks for watching! The front baffle panel is walnut.

[@hififriend4512]

@@KirbyMeetsAudio Thanks a lot

[@Fildakor]

Hey Kirby, beautiful speakers as always :) anyway could you please upload some sound demo here? :) thanks

[@KirbyMeetsAudio]

Sound demo coming soon! Keep an eye out

[@msumatt83]

These are great! I’d love a build talk on this video. Are there build plans (crossover) for these anywhere? I’ve looked, but can’t find them. I love the inspiration and how-to sides to your videos. Excellent job!

[@cburner]

I'm interested, too!

[@Azmodan911]

Hey Kirby, i really enjoy your woodworking. You definitely have some talent there. Are these the towers you mentioned a couple of videos ago? I was hoping to see a much larger 3-way floor standing pair. Maybe they're still under construction?

[@KirbyMeetsAudio]

Still working on those! Much bigger build. I'll probably make a design series out of them. Thanks for watching!

[@timschutte8310]

Eric H , I agree, I would like to see a larger floor model made. I currently have a store bought set with side fire 10 inch woofers, two 4 inch front mids, and a one inch dome tweeter on the front, 3 1/2 feet tall. they sound incredible.

[@Azmodan911]

@@KirbyMeetsAudio Awesome! Looking forward to it!

[@MrMullerLove]

Very nice job!

[@andremoura.produtodesign]

Cool!!!

[@vVANQUISHERVv]

Did you wire the sub to the mids? I'm a novice btw

[@robertsoncletokoerner7012]

Que belíssimo trabalho e também perfeita é a apresentação...parabéns!!!

[@MrJMagoo]

Always enjoy watching your work. The speakers are so beautiful and clean.

[@timschutte8310]

, great job. I am definitely building a pair of these and I'm using the Tangband 5 1/4 inch woofer !!! Question Kirby, why do you never use any Polyfill ???

[@raymonddegennaro3097]

I love the thin design. Any thoughts on a thin near field center channel speaker? Ideally one that could be used as a monitor stand.

[@bh69videa]

It look nice but I doubt that it's the best solution - what about phase shift and directivity ? It can work with (sub) woofers, but in this case x-over frequency is too high. Tweeter and woofer are in different distance from listener. They should be close to each other and in the same distance to avoid time/phase shift and interferencies in overlaping gfrekvencies area.

[@arena_rock_man9030]

It'd be nice get a little bit of a demonstration to get an idea of how they sound. I'm sure there's other people out there who be a little hesitant to spend money on plans and build something that they might not end up liking

[@Aakashh_Sharma]

Will the subwoofer won't push the speaker from inside While excursions?

[@KirbyMeetsAudio]

The two drivers are in individual enclosures. You can see it at the beginning of the enclosure box build. Thanks for watching!

[@Aakashh_Sharma]

@@KirbyMeetsAudio ohh thanks.. Amazing work with built mate..

[@kencohagen4967]

Could I get plans for these?

[@shido641]

Hope you answer cos I've been looking everywhere for a definitive answer. But how do you cut recesses for flush speaker mounts? What bit should one use on the router?

[@belovedconsole]

0:57 starting this because I am so curious where you're going to cut off the sub and how you're going to keep its enclosure separate from the top. Also from your last review of the build of the little 3.5s, I myself had though of pairing with a bass and letting the smalls be essentially mid and tweeter.

[@belovedconsole]

7:19 I'm guessing you were able to keep them in the same box non-separated because the waves from the side-firing at 90 degrees will not have significant impact on the front-firing, since they are crossing each other? As opposed to both front-firing where the air from the back of the sub would push-pull the back of the smaller driver.

[@jakubnic182]

Excellent nice work. But same volume for two different speakers is rubbish....

[@hernanl.1165]

Is the woofer sharing the same enclosure as the speaker? If yes wouldn’t they counter each other causing loss of quality? Other than that they look beautiful and unique.

[@frosty6845]

Some really advanced speaker designs use side firing subwoofers, the Kii 3 comes to mind, granted those are incredibly expensive and have internal amplification and digital processing to optimize sound quality

[@attainableaudio4533]

There is a divider between them if that's what you concern is...

[@davekimball3610]

Brass and, is it walnut? Looks awesome!

[@KirbyMeetsAudio]

Walnut, yes! Thanks for watching!

[@annihilationindustries1990]

so your sub is sharing the same space as your ps95 ? im sure that doesnt help the highs

[@LucasGabriel-lg3kr]

Bro, I have the Samsung MX-F730 mini-system and I want to make an adaptation, use the speakers and just put them in a little box on the PC table to make it more compact and have a nice sound... do you think it can be done? I'm from Brazil (São Paulo) and I really liked your video

[@timvanduijnhoven2777]

Pioneer X-PM32 has also a woofer at the side. Nice vid btw

[@luigitabacco7193]

hello what oil did you use for the front cover?

[@justincase3880]

What crossover did you use?

[@gerritduplessis7122]

VIELEN DANK! Baie appreciated! most excellent work! can one not simply order a basic Kirby speaker set? im in South Africa...

[@edstachura1682]

Hi ordered the side firing speaker plans and haven't heard anything? What's up with that .

[@matthewvalenti286]

Do you think the duo build or the side fire build you did would be better for a record player in a midsize room? Trying to incorporate one of your builds into a full record cabinet build. I just can't find your plans for either of those builds.

[@-martintheengineer-7465]

I would like a sound sample of these speakers. Best regards Martin

[@KirbyMeetsAudio]

Sound demo coming soon! Thanks!

[@faisal_basha]

That's so amazing bro I love it

[@KirbyMeetsAudio]

Thanks for watching!

[@faisal_basha]

@@KirbyMeetsAudio Your welcome anytime 😉

[@felipehelal3782]

Hey Kirby, nice job! It’s a interesting design. The woofers have a separate enclosure inside?

[@KirbyMeetsAudio]

Thank you! Yes, there are two areas inside the enclosure.

[@SmR8008]

Now those are a sexy pair of speakers 😊

[@garlicbad]

Great work! want to see the build plans.

[@Tonewood]

Hi Kirby please do a measurement on them 🙂

[@3rutu5]

very nice Kirby, i would love to see what the crossover was for this. I loved the look of the boenicke W5 and these look like a more affordable solution to them :) Will these running of an internal or external amp? Keep up the good work!

[@KirbyMeetsAudio]

Thanks for watching! I'll probably do a follow up video on these talking about the crossover and do a sound demo. External

[@isaiahbanks3801]

Do sound test on your builds plz.

[@KirbyMeetsAudio]

Sound demo coming soon! Keep an eye out. Thanks for watching!

[@alexandrulucian8701]

@@KirbyMeetsAudio is like shit to make a video build speakers then no sound test.

[@arthurwatts1680]

@@alexandrulucian8701 Give the guy an effing break - he's shown you how to build a pair of speakers, often accompanies his videos with complete build plans and parts lists and you're still hammering him for a sound demo that will be - at best - a facsimile of what he hears in his listening room ? Sweet Jesis - entitled or what ?

[@alexandrulucian8701]

@@arthurwatts1680 i do not need to show me how to build a speaker they are many more tutorials here more efficient and with more skils then him!

[@arthurwatts1680]

@@alexandrulucian8701 Then your choice is obvious - watch the other videos or (even better) build a pair of speakers. Problem solved.

[@eperksmedia]

It’s a tricky compromise you’ve made with this design. I tried to design something similar but there is simply no way you can get the woofer low enough on a speaker that size to negate the issue of directivity. I’d like to see the crossover!

[@callmeclife4366]

Realy great video and keep up the good work. I love this speaker design I think im going to build something similar too this.

[@timschutte6924]

Suggestion , work for Tyson chi

[@photojunkysdronezonevlog]

Do you stuff the insides with any sound dampening material?

[@andrescasasfranco2646]

How can I download the plans?

[@kaedeschulz5422]

You know that mounting the driver's behind a plate like you always do is acoustics wise not benifitial? Apart from that it looks good!

[@timschutte6924]

Why dont you date or Brad nail your speakers ? Just wondering. You do great work Kirby. I really like your style.

[@shibbi972]

nice build but the woofer sharing the same space with the mid im not sure about this

[@henriquermendes]

Did you watched the video?

[@shibbi972]

@@henriquermendes my bad i didn't paid attention but it was very subtle