SIMPLE tech. Real price. Detailed analysis of the process and cost

All coincidences are random. Videos with auto-subtitles. You can independently enable translation of subtitles in the KZbin player. In this video I show how to paint on metal at home. I show in detail the process of metal etching and give prices of the products I use. The cost of materials and tools is relevant for the region in which I live today.
I wish you pleasant viewing.
Video about etching metal using a laptop power supply. • How to draw on metal. ...
To support and develop the channel:
/ kirill_runz
_
• Drawing on metal. Ax r...
• Drawing on metal. How ...
• Drawing on metal. How ...
• Drawing on metal. How ...
• Drawing on metal. Old ...
• How to make a stand fo...
_
www.facebook.c...
/ _saved
_
www.amazon.com...
www.amazon.com...

[@KirillRunz]

laptop power supply: laptop power supply tracing paper : tracing paper primer : primer white paint : primer artistic oil paint black : artistic oil paint black acetone : acetone nail polish: nail polish engraving pen : engraving pen impact engraver : impact engraver crown batteries : crown batteries cotton wool : cotton wool salt : salt

[@AliAli-ov1ll]

You are a great artist

[@KirillRunz]

Thank you for your attention to my work.

[@marcob6218]

Sei un vero artista

[@chewy7192]

Why did you use a laptop power supply for one part and 9v batteries for the next?

[@camenbert2575]

очень хорошая работа, можно ссылку где можно купить именно этот нож в заготовке

[@bigoldgrizzly]

I wish I had access to this excellent information 25 years ago before my hands got too arthritic and shaky and when I had good eyesight. I have, however, got my eldest interest in having a try. Thank you for sharing this technique freely with everyone.

[@KirillRunz]

Thank you for your attention to my work. Glad to read your comment.

[@rmy15956]

Thank you , for this beautiful art and thank you for teaching us how to charge !! That was the main thing that I didn't know !!! Well also the art 😂

[@TienNinh-nl8om]

Quá giỏi

[@ryanmarsh4713]

I have tried many different art forms and have always loved gun engraving but never thought drawing on metal was something that would be easy to start until watching your videos, thank you for the inspiration.

[@СергейАренин]

Кирилл, считаю Вас своим учителем. Когда впервые увидел Ваше видео, решил тоже попробовать на топорах. Сейчас получается уже сравнительно неплохо, но до Вас пока далеко. На днях должен прийти электрогравер и всякая мелочь. Буду продолжать учиться. Спасибо за творчество. Желаю успехов!

[@KirillRunz]

Спасибо за Ваше внимание к моему творчеству. Желаю Вам дальнейших творческих успехов.

[@GarageArt]

Друже доброго здоров'я🤝робота як завжди бездоганна,подача процесу в відео все зрозуміло і повчально,успіхів тобі і натхнення✊✊✊🤝🇺🇦

[@СергейАренин]

@@GarageArt спасибо огромное, хотя я не очень всё понял, но суть уловил

[@СашаБистрицький-ь1е]

Завдяки вашим відео я теж почав вчитись травити, іноді досить непогано виходить. Хоча до виших робіт ще далеко, але в цьому ремеслі я вважаю вас своїм вчителем. Дякую вам!!!

[@jay8353]

Dude you are magnificent, I have been following you for a while now and I have done an etching that I'm reasonably proud of. It's definitely a time consuming process,but the finished result is worth it. So thank you so much for sharing your knowledge, it's very much appreciated

[@MaxxM-id6kv]

Иметь такой нож удовольствие,,но смотреть как такое создаётся двойное удовольствие.Спасибо за ролик и объяснение и желаю успехов исчастья уважаемый Мастер!

[@MihailKupec]

Очень красивая работа. К сожалению в таких работах только известное имя поможет продать по хорошей цене. Я предполагаю, что не меньше месяца требуется создать такую прекрасную работу. Спасибо за за бесценный труд... Удачи в творческом развитии! 🤝🤝🤝

[@KirillRunz]

Спасибо. По времени такая работа занимает около дух недель, если делать не спеша, но постоянно. К сожалению, у меня сейчас нет такой возможности. Желаю и Вам творческих успехов.

[@MihailKupec]

@@KirillRunz , Спасибо, я потихоньку стал осваивать технику "тюканья" по металлу...))) Только до меня дошло, что в ручную лучше будет и это видео выходит. Удачи в делах и побольше свободного времени, береги себя... 🤝🤝🤝

[@Nasko_Akimbo]

C'est tout simplement magnifique un grand bravo ! Je me suis mis à l'électrolyse grâce à vous il y a quelque mois je vous remercie de transmettre cette passion grâce à vos vidéos ! Attention tout de même le phénomène chimique qui se déroule rejette de l'dydrogène, donc il est recommandé d'aérer la pièce mais surtout de ne pas fumer ou de travailler avec une bougie ou à proximité d'une plaque de cuisson... L'hydrogène est un gaz détonnant très puissant, alors prenez garde. Encore merci continuez ainsi votre travail est magnifique de qualités et passionnant !

[@александра-б8й8ф]

кирилл ты лучший! и ты прав такие вещи уходят на подарки хорошим друзьям, а продать их за гроши жалко.удачи тебе!

[@Guildofthegildedhilt]

Unbelievable, as always. The level of detail you tackle on such a small surface is awe inspiring. Thank you for sharing your work.

[@YakoB_111...]

Смотрю не первое ваше видео. И восхищаюсь вашей работы. Желаю удачи и процветания вашему каналу. Работы всегда очень красивые.

[@straxacore]

That's a very beautiful knife. Not normally one to say that but you put real craftsmanship into that

[@KirillRunz]

Thank you for your attention to my work.

[@elisoncorreadasilva4937]

Simplesmente maravilhoso!!! Grande artista você é!!! Parabéns pelo trabalho!!!

[@KirillRunz]

Obrigado pela atenção ao meu trabalho.

[@TeaClipper1976]

You have an amazing dedication and artistic skill! Absolutely amazing! Excellent step-by-step explanation. Thank you.

[@hivus6499]

Это просто шедеврально, всем бы такой усидчивочти 😂 мне кажется тут не то что любой сможет, а не каждый художник такое сотворит. Удачи вам в вашем прекрасном творчестве.

[@ТихонХарченко-и9ц]

Спасибо за огромный труд,вы отличный специалист. Удачи Вам!

[@gillouleloup5012]

C'est très beau ! Merci pour ce partage. Amitiés de France.

[@KirillRunz]

Merci de l'attention que vous portez à mon travail. Salutations d'Ukraine.

[@leatheraccessories646]

Beautiful ! and it's true, you can't always charge the value of work with x3, sometimes it can go over x20... I'm waiting for your new achievements, and may God bless you with peace in this absurd war, started by some sick minds, I hope end as soon as possible and let everyone return to their personal lives, sorry for the lives lost

[@KirillRunz]

Thank you for your attention to my work. I am pleased to read your comment. Peace to all of us.

[@Bilbo0472]

What a great drawing skill and great management of shadows and depth in the designs !! You did a super great job !! Amazing !! And VERY NICE !!

[@luisalfredomena9093]

Hermoso trabajo maestro. Es una inspiración para mí. Espero algún día estar a su nivel... Pero lo que usted realiza no tiene comparación... Saludos de Argentina... 🇦🇷

[@S.D.-oz2oi]

I have been watching your videos for a long time. You are a great artist! Thank you for sharing how you do your master pieces!

[@mi4ilvideo]

Первый раз наткнулся на твой канал…. Ты мастер своего дела. Отличная работа. Всего наилучшего тебе. Лайк, подписка 👍👍👍

[@cris-ci8fs]

Bonjour kirill. Quel plaisir de te revoir .De pouvoir apprécier ton talent, ton art . Merci pour tout le temps que tu prends à nous expliquer en détail. Tu es un maître en la matière ,tel un alchimiste. Merci encore pour tout , pour la transmission de ton savoir !!

[@KuulSHep]

This is just me, but I think you should sell the rendered sketch, signed, along with the knife.

[@KirillRunz]

Thank you

[@MrBealsibar]

I can not wait to see what you will be capable of the day you feel you no longer need "Cheap Knives". Stunning Work, as always.

[@KirillRunz]

Thank you for your attention to my work and your comment! I myself really want to move on to working with expensive products. But almost everything I did before was experiments. I am self-taught, and I do my work based on my own understanding of how it should be done. I would also like to learn classical techniques of engraving and metal etching. Then I can take the best experience and responsibly use it in my work. Thank you.

[@waltermoreira3811]

Otra obra de arte amigo genial trabajo ...te pregunto las pintura aguantan el grabado por electrolisis o hay que poner dos capas de pintura ?? Gracias

[@sylviede-benedetto9695]

j adore votre conclusion de fin . L expérience aquise en travaillant est plus enrichissante que le prix du couteau . Merci pour votre travail et votre partage

[@gilbertosantos8192]

Kirill , fico muito feliz em ver seu vídeo recente ! Sentir falta da sua arte ! Deus o abençoe ! Sou seu fã !

[@KirillRunz]

Obrigado pela atenção ao meu trabalho. Fico feliz em ler seu comentário.

[@nomad127]

Слов нет! Одни эмоции! Как всегда, восхитительно!!!

[@KirillRunz]

Спасибо.

[@medved6093]

Отличная работа! Молодец!

[@KirillRunz]

Спасибо.

[@robeccs]

It heartbreaking to see real artisans sell off their hard work almost for nothing these days. Common folks just don't know the amount of details goes in work like yours.👏🏽🍻✌🏽

[@Alex_Pervach]

Чувак, ты видел цены на расходные материалы? Это цены российских магазинов, а не американских. Цена продажи тоже российская и она конкурентноспособна именно на российском рынке.

[@NomadicWolf]

@@Alex_Pervach The time of the artist is not worth anything? The talent of the artist? Also on discount? This job requires a certain amount of skill and talent that many do not have. "Don't sell yourself short" is a compliment about the quality of work, not a negative thing but cautionary. This is decent work. :)

[@Alex_Pervach]

​@@NomadicWolfименно так. Я объяснял, почему эта цена конкурентноспособна на российском рынке. В России 1 киловатт-час электроэнергии стоит примерно 5 центов. Это для сравнения расходов. Квартплата 30-50 долларов в месяц, это коммунальные расходы. Бензин - 55 центов за литр.

[@NomadicWolf]

@@Alex_Pervach those prices make me envious. Wow.

[@Alex_Pervach]

@@NomadicWolf welcome to Russia, bro!

[@-SlamDunK-]

In your pricing you never accounted for your time, that's where the true value lies. Excellent work.

[@iknowwhatudid712]

I have been a fan your work for years now and until this video I had no idea that the spray primer and spray paint were nitrocellulose and thank you and much respect.

[@Leonarco333]

Regular lacquer works well also. Some parts of the world NC lacquer is cheaper or more expensive than other lacquers. Whichever is cheaper, the right color, and resists the etch is fine.

[@yanivGur]

Spectacular project my friend 😀

[@KirillRunz]

Thank you for your attention to my work.

[@ezequiel3906]

Que impresionante gracias por compartir su sabiduría saludos desde Venezuela

[@ОлегГаврилов-п8щ]

Работы просто шикардос ! Причём все .

[@ВахтангВоловикис]

Ты конечно же лучший в своём деле Кирилл!!! За счёт многоразового травления, в твоих рисунках есть перспектива, как говорят художники, это когда видно расстояние между предметами и конечно же всю погоду делают тени. Пересмотрел сотни видосов, и у всех они в одной плоскости. Ты мастер и художник это факт. Я тоже пытаюсь учусь у тебя, делаю скриншоты после каждого слоя травления и т.д. Теперь пытаюсь работать с тенями. Купил финскую спицу (тведосплав) заточил под таким же углом, вроде точки набиваю, пальцем краску наношу , но начинаю вытирать и краска почти уходит. И сохнет на металле очень долго, двое суток лежала на батарее и один хрен не достаточно высыхает. У тебя на видео всё так быстро. Или ты феном сушишь ? Тюбик использую такой же, Ван Гога

[@XeenoMorph]

you make it look so easy that I almost want to start myself! 😄

[@KirillRunz]

Thank you for your attention to my work. I wish you creative success.

[@BengtRosini13]

I really enjoyed watching this video you explained your steps to the whole process very well. I feel more confident now, having seen and understood your process and explanation. Thank you.

[@giovanniruggiero622]

I really love your works. Great jobs!

[@KirillRunz]

Thank you for your attention to my work.

[@rainbowchild63]

Молодець,Кирило! Як завжди супер!

[@tituszx1]

Если при травлении после образования коричневой жижи переключить полярность на обратную, то металл будет зачерняться. Работает на многих сталях, но не на всех. Автору спасибо за видео и удачи в творчестве!

[@ShaunRoyce-z4u]

I’m having a hard time locating the paint you use in the states, any recommendations for paint types that dissolve respectably with acetone or paint thinner?

[@steveocvirek6671]

I think your art is absolutely fantastic! But I also think that your work is worth more than you think. The Mona Lisa and a $10 picture are both painted on canvas, but the artist makes the value. Your art is spectacular. I would recommend putting it on axes which are worth more value than a cheap pen knife.

[@samuel.t4783]

Vraiment très beau travail ! Pensez-vous qu'il est possible de faire un travail similaire sur de l'inox?

[@KLiM-RUSS]

Братик, ты красавчик. Смотрю на таких людей как ты и грустю (нет это не опечатка), что я так не умею.

[@NORTH-ZONE-tz7dd]

as always you do awesome and beautiful work, what I would like to know is how long did it take you to produce the finished product? even an approximate time would be interesting to know...thank you for sharing with us! Power to you

[@gunterschone8402]

Nice video. The knife looks great! 👍 You explained and showed it very well! 👍💪 I hope you have a nice time studying, with some nice ideas for designing tools (axes, hatchets, knives, etc.). 🙏

[@I_Lomaster_I]

Титанический труд для терпеливых и талантливых . Я бы закончил, пожалуй, на покраске ))) Далее повторение невозможно. Ваш труд и талант бесценны, потому что неповторимы и индивидуальны. Даже если кто-то перерисует рисунок, это будет другой вариант.

[@sirmarkmagee1315]

You are a true master wish I could take classes from you totally awsome art

[@dnkal2875]

Can i ask what protection you use because from what i have seen because from your videos i also wanted to try it but using salt on stainless steel is highly toxic. Both fumes and the water

[@eddietowers5595]

I am usually just etching peoples initials and pertinent identifying numbers on their properties using a converted PC psu made into a benchtop power supply, banana plug and connector, and alligator clips. I use the plastic body Q-tips/Ear buds, cut these in halves and slide thin brass or copper rods from K&S Hobby metals that would have a good snug fit into the Q-tip/earbuds body, push the rod into the cotton, soak the cotton in the salt solution, grasp the brass/copper rod with the alligator clips of the power supply and have a re-useable "brush" for etching. I make my own stylus from acetyl/Delrin with the copper/brass rod going through to a banana connector, on the end of it now, Just for comfort.

[@mykolapshenytskyy6238]

😮 Це неймовірно: малювати на металі з допомогою травлення електролізом.' та гравіруванням. Таку технологію можна і на термосі.

[@norbertr823]

Thank you for sharing your art, and the knowledge that you work so long and hard to gain.

[@ananoplay5234]

Seu trabalho é realmente muito bonito! Parabéns!

[@r.davidhill7639]

Excellent video of how to do this process. Thank you for sharing.

[@stonesmatters]

i love that you use ai voice and explain in english the steps in detail, the best i have seen yet

[@richardcaplinger3622]

Always love your work. In USA you could sell your work for what ever you wanted. I would love to have one of your pieces in my knive collection. Really liked the Game of Thrones one.

[@kriegshelden6816]

Thank you very much for this video, it has helped me a lot in my oficine, great work brother, your talent is amazing.

[@mixmix74]

Завидую! Красиво! Смотрел сериал,увидел уведомление, бросил сериал и включил Ваше видео!

[@KirillRunz]

Большое спасибо за Ваше внимание к моему творчеству.

[@mixmix74]

@@KirillRunz я тоже этим занимаюсь но до Вашего мастерства как до Марса. Даже купил масляную краску(не ван гог), но не очень то помог🙃

[@СергейАренин]

​@@mixmix74тоже зацепило творчество Кирилла. Занимаюсь рисунками на топорах. Получается неплохо, но до работ этого мастера пока далеко.

[@asds-m5u]

Согласен именно мастера

[@asds-m5u]

Сам топорики порчу.рисунками.

[@wizardforge7734]

І вам теж подальших творчих успіхів 👍

[@RealconstructorStas]

Кирилл, могу сказать одно - реальная стоимость и цена это способность быть художником. Если человек не может провести линию в нужном месте и поставить точку что бы создать тень, то стоимость материалов не имеет никакого значения. Рисунок не получится. Хорошая работа, ждем новых творений автора.

[@anatolybulatov4931]

Огонь 👍👍👍. Спасибо за видео

[@ddoherty5956]

A beautiful knife, well done 👍🇬🇧

[@KirillRunz]

Thank you for your attention to my work.

[@marksstudio]

That was a terrific project and an informative and very much appreciated video. Thank you for that.

[@frankisrael3264]

Thank you for this great Videos.

[@pigmetto]

Gran trabajo. Que voltaje usas para grabar en metal?

[@RightEyeOfRa]

bro, your skills are priceless, u are a great artist! keep going on, thanks for share your amazing art and knowledge.

[@vintran9777]

Love your work.👍I have a question? Is it possible to add some colours?

[@Володимир-ю4п]

Гарна робота 👍🇺🇦 🤠. Давно не було видно, як справи?🤔🤠

[@richardhenry1969]

Dude your are a amazing artist. That drawing was beautiful

[@waltermoreira3811]

Hola amigo ya sabes que me impresionan tus trabajos te quería preguntar la electrolisis no afloja la pintura en aerosol ??

[@diabhalman]

Beautiful work!!!! Do you treat the metal in any way to keep the oil paint from being removed during the wipe down?

[@padre2211]

Hi Kirill! Love your work! Quick question - would the Ferric Chloride method (without the current) work on etching a motorcycle gas tank? I am thinking about removing the paint, cleaning it and then do some sick art on it. Thanks!

[@peterlee5535]

I can answer this question for you. Yes! I have done what your are suggesting but on Vespa side panels. They are mild steel the same as most motorcycle gas tanks. I used vinyl decals for putting my design on rather than the paint method here but it is the same process. With a gas tank you will need to keeo it sealed so the ferric chloride doesn't make it's way inside the tank as you don't want to eat away the internal metal. It is very doable tho so long as you use fresh ferric chloride and only use it for similar steel afterwards. Once you use it for etching one metal it loses it's effectiveness on others. Also, you can do a mix of ferric chloride and citric acid which is onown as Edinburgh Etch and alledgedly gives a quicker and smoother bite to the metal. I hope that helps :)

[@aandc2005]

That's outstanding!!! Great job making this and your a really good artist also!! That's a good story line on the knife time, money, drugs, reaper, beautiful women destroyed by all of that and maybe recovering...I'd say that knife is now worth near 200.00 maybe a little more.. also you should sign your work and date it also 👍

[@GiorgosPapadopouglou-fn3os]

Hello and thank you for your videos! I have a question where can i find a good item holder?

[@Empqre]

Hey! I've been wondering for a while now, what is that object that you placed the knives back side on? I saw that you can put your object in place and it doesn't move. Thank you.

[@ClaudioRosmani]

SPETTACOLO !. . . . bellissimo lavoro , complimenti !

[@T_B]

Incredible!! I love the shadow work! 💪🏻

[@xaap8408]

awesome work, just one question. How do you seal the end product, so the artistic oil paint you rub on wont come off?

[@IgorANUR]

Здорово получилось!👍А я травлю по другой технологии,с помощью раствора медного купороса.

[@Silentpavel]

Нереальная красота

[@johnnny9]

thank you for sharing your skills and talent and letting us learn from it

[@DivinePonies]

Laser etching goes brrrrrrrrrr But in all seriousness, it would be really hard to find a customer to pay a realistic price for the handwork and hours that go into this type of product. Video like this helps to show the real work that goes into the whole process.

[@AWS91]

Video very good

[@KirillRunz]

Thank you for your attention to my work.

[@estebanlopez5372]

So nice!

[@Ермек-з6г]

Базара нет, вы молодец очень круто 🔥🔥🔥🔥🔥

[@reekz8089]

Aloha from Hawaii. I’ve been watching your videos and I love it. How can I buy what you made. I just wanted to collect them. Mahalo and Aloha 🤙🏽🙏

[@johnkemas7344]

Great work, very well done! Love your work.

[@ДобрыйРусский-р4э]

Великолепная работа💪👍

[@mekhladutta12e94]

Hey amazing works, watched all your videos since yesterday. I am gonna make an etched stainless steel bracelet for my friends as farewell gift, it is going to be a daily wear. Can you please tell me how to get the etches deep enough so they dont fade away due to daily use, or atleast stays for a 5 years or so. Or is there any other process that can be used that will cause a permanent etching? Please help me out

[@davidlagno7717]

Beautiful job. It's now priceless

[@danzigrulze5211]

There are a few Spyderco model of folding knives that have stainless steel handles. You should try to get a hold of some of those and you could resell them at a higher price. Your work is on par with most I've seen that use laser etching.

[@ІгорЯндрус]

Чудово ,отримав чудові відчуття від перегляду

[@Crobertg10]

Thank you for sharing this information sir I have to try it for sure

[@nikifordesign]

Piękny❤

[@tolagan]

Do you use the oil paint because its more effective or cheaper than using bluing? And does the oil paint wear off if someone washes the knife? Love the videos Kirill. You inspire me and i have done my first etching and cant wait to do more.

[@abruptlyblunt]

does the paint wear off, no you take off, the paint serves as the mask for your artwork, you cut your design into the paint surface and use it as the stencil to etch the metal then remove it......

[@mannyclaudiacortez7708]

Thank you for making these kinds of uploads

[@94Csabba]

Thank you for these videos! I work in a sheet metal factory. I wonder what will I accomplish with laser/bending/welding for the material and, AI+photoshop for artwork. I have 0 artistic skills.