Kitchen fitting How to install corner post in a Base corner unit

[@bloominheckproductions905]

Simple and straightforward demonstration. Great, thanks.

[@martinwarner1178]

Thanks, now I know how, I've two corners too do in my kitchen. I like your presentation. A great big help to us diy's. Peace be unto you.

[@donjohnson4368]

Good one. 👍thanks for taking the time to

[@indavilliage]

thanks fella saved me time and better than that, uncertainty. nice one

[@Mrlespaul1964]

Very helpful lm fitting my kitchen l was unsure how to fit the corner post but now I know thank you very much.

[@stevehayhoe4326]

Hi, thanks for a very informative video. I am installing my first kitchen & your help has been invaluable. Many thanks.

[@kpatel8549]

Thank you for sharing this video appreciate your time 👍

[@equinox747]

brill..well done presentation.

[@MrRich2108]

Great job again

[@jamesparry175]

some great info and tips, thank you

[@TheStratplayer76]

Good idea. Liked Video 👍🏻

[@johnmawhinney5294]

Excellent advice many thanks

[@geoffstein3896]

Onya mate this video has helped me heaps 👍

[@stephenevans4782]

I noticed the fitting of the batten at the end of the video.... surely that can only be fitted if your walls are square?

[@ic4765]

Thank-you!

[@trevorspence4178]

Great tip mate and great video well described.

[@MrMultiH]

Thank you, subscribed.

[@abdulrahiman812]

Good man, thanks for the tip. It’d be great for more kitchen installation videos.

[@daveharlington5233]

ABSOLUTELY FANTASTIC

[@breadlegz84]

Thanks for the help

[@benjaminhewins9658]

Thanks for the video, it really helped me today!

[@Das_Tipples]

thanks for this, that's a 1000 corner unit from Magnet. There's no specific step in the assembly guide for fitting the corner post, and you have to use your judgement.

[@tipsylipsy3]

thank you so much for this!

[@davidlynch2006]

Great video buddy

[@2326TOM]

Thanks again.`

[@Ratsotone]

Just wondering why is the corner post set lower than the doors

[@EMEL-hr4ut]

In video that is because doors not adjusted yet (final step but I did on fixing CP) as you can clearly see right (hinge) side of door (on left cupboard) has to drop to be level.

[@barrytaylor1765]

Just done this myself thanks for showing this 👍

[@dawoodadam2926]

Very informative and helpful tips thank you. Could you please tell me what are the dimension of the blind corner box and the post width please.

[@bakermanxxx567]

top man. many thanks

[@RiffmuirKennels]

You can screw a piece of chip or end panel behind the corner piece to let you screw from the sink cupboard side. I prefer to screw a piece from bottom of cupboard to top the same width as the corner piece space. I means you can screw to keep the cupboard plumb and prevent movement from plumb. I would also fix the cupboard in position and be level with the top before joining the corner piece spacers.

[@misteranonymous5523]

Thanks 👍🏻

[@nicolaleone411]

Hi did you have to leave a 30mm gap between your 2 tower units or did you just screw the 2 together thanks

[@christhompson1708]

Very good vid bud keep them up

[@matteomurino9052]

Hi Thanks for making the video, very useful content. Im a self employed kitchen fitter in London and looking for extra work, where and what would you recommend me to do? Thanks in advance

[@mtdillyb231]

Fix a 2x1 to the back your corner post and you can fix through the sink unit into the corner base

[@gpcrawford8353]

I notice that the hinges clip on what kind are the please?

[@carltabs3686]

How would you install the wall cupboard equivalent? To disguise the gap from underneath?

[@garvielloken3929]

Nooice!

[@dilligaf2386]

Is this how a professional kitchen fitter would do a corner post with angle brackets or would it be done differently.

[@MrSilverin16]

can you tell how we can put an end panel for the washing machine after that corner unit ?

[@ek6868]

Hi tanx for the upload that dewalt drill comes with a impact drill wouldn't you use the impact for screwing in screws saving time changing the drill bit?

[@ernestdeak8402]

E K I find the impact drill is sometimes too powerful for delicate stuff and too noisy as well. The impact drill is great for first fix carpentry though

[@daz23100]

@@ernestdeak8402 invest in the 887 impact with the 3 settings, 1st setting perfect for delicate screwing

[@ChristopherClaudioSkierka]

Hi , may I ask you what spec were those long screws you used at 8 min - to fix with the block of wood? thanks

[@stephengreen909]

🌟🌟🌟🌟🌟

[@chriswelsh587]

Why would you fit the door at this point !!! I don’t unpack my doors until the laminate worktops are installed. To fit that corner post I would measure the aperture where the door will eventually go, so that being whatever size door will be fitted, let’s say 500mm for arguments sake, then that is the mark where the corner post would be fitted to.

[@ThatPixelGuy]

Sometimes it's easier just to put it on and visually make sure it all fits correctly

[@Rob........811]

Haha that's hilarious, its one thing fitting it wrong but actually doing a KZbin video about it 🤣

[@Gerrardfucked8.5inarow_haha]

Painful to watch 🙈😂🙈😂

[@geoffh3431]

Why don't you say something constructive like what is wrong & how to correct it, rather than being a negative smartass!?

[@THEG12EG]

Explain then

[@Das_Tipples]

don't blame him, blame Magnet, this corner post isn't detailed in the assembly guide.

[@313keiko1]

Ok genius what's wrong

[@Akshana11]

Hi I have a good kitchen but my corner post is cracked and I’d like to replace it. I don’t know the manufacturer of my kitchen as it was already there when I moved in. How do I go about getting a new one ?

[@fredmorozov]

Either to take it of and use as the example say at bnq or Howdens(or ebay, sometime installers are selling leftovers) to get same size and shape or take 2 filling panels and make your own but you might need some DIY skills to cut nicely and neatly

[@clairetyler3957]

Am I missing something? This isn't a corner cabinet? This looks like 2 seperate cabinets

[@garonparkGC]

That's how the majority of kitchens work.

[@PNH63]

Ok but the corner post is a bit low.

[@mattknox6443]

Corner post is fitted wrong way