thats some build - a system most of us can only dream about.
@Necromancerbob-zp7us6 ай бұрын
I love straight line hard line done like this. Very beautiful colours too. Don’t see enough blue
@theonlyredspecial6 ай бұрын
Blue can be one of the nicest colours imo.
@philipjfry6286 ай бұрын
GPU manufacturers should have a standard connector to allow the use of water cooling on their heatsinks or sell "naked" cards to allow you to use your own water cooler.
@Everychillitsjustlife-cz8zz6 ай бұрын
wishful thinking !
@johnerikson24436 ай бұрын
Wouldn’t work
@stewart95406 ай бұрын
They'd charge a premium for a naked card 😂
@Linuxdistro15-ih8ox6 ай бұрын
Loved the Timelapse. Very theurapteutic
@KitGuruTech6 ай бұрын
Thanks for the comment 👍🏻
@lucifersheadscarf69886 ай бұрын
Yeah I’ve watched it a few times. Same.
@harleylover94466 ай бұрын
I love your builds James. Absolutely stunning job 🥰
@SimonZerafa6 ай бұрын
What a profoundly illogical statement! 😮 Basically the Alphacool fans *could* be total crap but we don't care as long as they look pretty 😟🤦♂️ If this is the best commentary you can manage then don't bother saying anything.
@jamesjessenden78386 ай бұрын
That pretty sums up everything in the modern world!
@KitGuruTech6 ай бұрын
This is a build. Not a fan review. We explained that at the very start. And we thought it was time to create a build again as we haven’t done any in recent months. If you want a review of the fans we may fit that In in the coming months.
@browntrousersforsafety-el2bo6 ай бұрын
Lovely build James. Very pretty !
@lovingthehardwarethisyea-py1xp6 ай бұрын
Spectacular. I forgot about alphacool. You guys tend to focus more on Ekwb.
@KitGuruTech6 ай бұрын
Glad you liked the build
@1966babysnakes6 ай бұрын
Classy build! Absolutely love it.
@KitGuruTech6 ай бұрын
Thank you kindly!
@1966babysnakes6 ай бұрын
@@KitGuruTechcould you let me know the cost of the components? I may have to copy this for a mate.
@geofftatesmate77486 ай бұрын
Brilliant work mr Dawson. Virtuoso 😮
@Everychillitsjustlife-cz8zz6 ай бұрын
love the build James, its so clean, and all the straight lines look so neat and 'industrial'. Hard line tubing is so much nicer than soft tubing. its just above my level sadly. wish you cuold make a guide on how to build a system like this for us not so experienced users.
@KitGuruTech6 ай бұрын
Its quite a easy with a distro plate, less bends are needed.
@user-uv8qn1br8q6 ай бұрын
That’s a work of art. Love the use of Amd in this one too. Far too many builds using intel. Nice to get variance.
@feisikLetsPlay3 ай бұрын
Very nice build, im going to upgrade few components and going to custom cool it as well, i have landed on very similar setup as you: RX 6900 XT / Ryzen 5 5800x3D. I have a question though: Would 1 of these radiators be enough for this build ?
@Aeonia924 ай бұрын
Beautiful. Convinced me to get the alphacool distro plate 240. Waiting on parts now
@EndoainTheBandit24 күн бұрын
What software do you use to monitor and control the alphacool stuff in the system ?
@jeremytine4 ай бұрын
i like other Alphacool products, but man they really damaged their rep with that fan debacle.
@shaunod67453 ай бұрын
Does the top M.2 drive not take the graphics card down from 16 to 8
@frijin4906 ай бұрын
Every distro plate build looks the same, there is zero variability between them.
@KnightRider-lq5yb6 ай бұрын
Ok well that’s me getting told off by the wife for pricing parts 😂
@maxsmith1116 ай бұрын
Looks good but I'll stick with my $25 air cooler
@JustCarnivorousCupcake6 ай бұрын
Wish the stealth fans were a bit cheaper, looking forward to the rgb versions as well
@bobsmithson85926 ай бұрын
I am going to go into the corner of the room and cry. My own system pales In comparison.
@whocares05036 ай бұрын
Great build, but if you were show casing Alphacool why not use the the curve maker? While you may not need it those of us who are not QUITE as adept would benefit . :-)
@thetechdevil-jn1vo6 ай бұрын
Is that for bending hard tubing ?
@brumby926 ай бұрын
Nah just need your eyeballs and a square table
@KitGuruTech6 ай бұрын
Ive never used a bending tool, always found it easier to do it by eye, or use the corner of a desk/worktop 😁
@geofftatesmate77486 ай бұрын
@@KitGuruTech we arent all at your level,. that tool sounds good to me !
@Rust_Buckett5 ай бұрын
Nice build! What coolant is that?
@currentlykent45936 ай бұрын
Acool aren’t sending the flush mount stop fittings anymore? That’s a shame. Nice and (seemingly) easy build, James. Good one.
@KitGuruTech6 ай бұрын
Thank you
@hotandcoldrunningwater-hj2mn6 ай бұрын
I think Ekwb makes nicer parts but this is a lovely build. How much is all the cooling gear in this system ?
@thetechdevil-jn1vo6 ай бұрын
Several grand for the cooling alone
@justindavis76006 ай бұрын
Bet that is worth a pretty penny😅
@murraywebster12286 ай бұрын
Looks great, does it have the performance to match? Would like it in a deep emerald green or a nice warm red/orange for winter…
@rvinster6 ай бұрын
I'm curious about your flow configuration - and why you have your gpu flow (hot) dumping directly into your cpu (also hot). Wouldn't it make more sense to have radiators between the hot components? For example: pump-discharge gpu radiator distro-plate cpu radiator distro-plate pump-discharge
@KitGuruTech6 ай бұрын
This is just how the distro plate ports are laid out, they are labelled in the manual RAD, GPU, CPU RAD etc. For a gaming pc it makes sense to me to have the GPU first in the line anyway, you want your GPU to be cooler for maximum performance right?, plus the difference in water temperature between the GPU inlet and outlet will be minor. Also CPUs just dont benefit as much from custom loop cooling these days, the CPU IHS is the limitation now.
@rvinster6 ай бұрын
👍@@KitGuruTech Thanks for the response! The build looks amazing btw... If you had more time for this build - what would be your mounting plan for the flow indicator? Or did it simply not fit?
@justincase71092 ай бұрын
10 out of 10 Easy!
@theonlyredspecial6 ай бұрын
Great job James
@KitGuruTech6 ай бұрын
Thanks!
@jielibai29126 ай бұрын
I had my alphacool rads just waiting for me to put them in once my pump/res arrives. Good to see how they work/look before hand.
@thetechdevil-jn1vo6 ай бұрын
Awesome what hardware spec is the system going to be ?
@jielibai29126 ай бұрын
I'm transferring a z790 mobo with a 13600k and 3080 rog strix to the case. First time making it a custom loop though.@@thetechdevil-jn1vo
@jamesjessenden78386 ай бұрын
Wish they would do a fan with a metal impeller too!
@kalitvenec6 ай бұрын
dream
@dreschaffhausen56936 ай бұрын
Very nice. Bending all those tubes must have been a nightmare. Always end up getting burnt fingertips from that work plus the smell of cooking plastic becomes your best friend. Well worth the effort though that's a fantastic build.
@jamesjessenden78386 ай бұрын
Hopefully they put this one up for a competition!
@KitGuruTech6 ай бұрын
Thanks appreciate the comments !
@lucifersheadscarf69886 ай бұрын
Looked great. Love the lines
@buyingastairwaytoheaven52526 ай бұрын
Burnt fingertips are a part of the job
@hothardwareforthewin-he4fz6 ай бұрын
Amazing guys love it
@blackcrov8406 ай бұрын
imagine this build in white evo, chrome fans and white gigabyte pro x soo good
@theonlyredspecial6 ай бұрын
Stunning agree.
@goranstewart47266 ай бұрын
When I saw the “stealth” wording I initially thought it was a rear connector motherboard build. I’m waiting for the ASUS motherboards and 5000 series gpu’s with the BTF connection for my next custom loop I think.
@Itsameamario-ns3se6 ай бұрын
Sounds like a good time to do it. Will you buy alphacool or Ekwb kit ?
@goranstewart47266 ай бұрын
@@Itsameamario-ns3se I’ve used both and tend to mix them in my builds. I can never get all EK parts as they never have stock and their white rads don’t match the white cases I’ve used so far.
@barrychuckle25596 ай бұрын
Great build, love it.
@shortshins6 ай бұрын
Omg i love the irish accent.
@iamahappybunny76406 ай бұрын
Irish ? 😂
@elteacher02236 ай бұрын
thanks for sharing, Can you share temps and benchmarks?
@festerleech49526 ай бұрын
Very interested to see how that water cooling is performing.
@KitGuruTech6 ай бұрын
GPU temp after 30 mins of 3DMark SpeedWay stress test was 49C
@elteacher02236 ай бұрын
@@KitGuruTech thanks
@lucifersheadscarf69886 ай бұрын
Holy crap that’s amazing James ❤❤
@KitGuruTech6 ай бұрын
Thanks!
@goranstewart47266 ай бұрын
Oooh very nice!
@swizzler80536 ай бұрын
Nice build. Have the same gpu and block but my memory temps are very high (80 degrees under load). All the other temps are amazing.
@Maxverstappenracing-dz3pt6 ай бұрын
I always was told alphacool were the cheap Ekwb. But that build looks brilliant
@Everychillitsjustlife-cz8zz6 ай бұрын
What cpu are you using swizzler ?
@swizzler80536 ай бұрын
@@Everychillitsjustlife-cz8zz7900x
@murraywebster12286 ай бұрын
Yes please, need a nice DAW, HOW MUCH?, ever thought of deliding for even better CPU cooling?
@justindavis76006 ай бұрын
He did a whole delidding project with Ekwb here over 3 videos.
@murraywebster12286 ай бұрын
@@justindavis7600 missed those ones, need to look them out, was the result worth the effort?
@Maxverstappenracing-dz3pt6 ай бұрын
Yeah I found those videos really good. I think James helped Ekwb set the whole delidding thing up with debareur
@murraywebster12286 ай бұрын
@@Maxverstappenracing-dz3pt DerBauer (The Builder) is the master of de-liding…
@KitGuruTech6 ай бұрын
@@murraywebster1228 We originally approached EKWB last year with the idea of them doing a delidding project with us. It took some time to get the final kit in place - and yes Derbauer was involved in the project with us. Also we have a new video coming soon on delidding as well. so stay tuned for that one.
@festerleech49526 ай бұрын
Really like that bistro (bistro?) plate bit of a work of art that. Sort of reminds me of the valve body of an automatic transmission.
@KitGuruTech6 ай бұрын
Distro 😀
@thetechdevil-jn1vo6 ай бұрын
Bistro 😂
@festerleech49526 ай бұрын
😂
@gogopowerrangers65966 ай бұрын
Very impressive James. Very very clean lines
@KitGuruTech6 ай бұрын
Many thanks!
@toonnut15 ай бұрын
Looks great 👍
@KitGuruTech5 ай бұрын
Thank you! Cheers!
@miikasuominen38456 ай бұрын
When GPU prices started to fall, I took a deal on 6900XT Waterforce. Then started to think how I would get it to work the most easiest way. I bought Alphacool 360 Eisbaer Aurora from Aquatuning's B-stock, removed the jet plate to maximise throughput. And was happy. Later, I wanted to put CPU also to watercooling... Well, I got the same Eisbaer, from same place and B-stock, but 480 size this time. I just bought an extension cable (or tubing, to be exact) set and that was it. Do that on any other AIO... Anyway, I just bought Alphacool 200mm reservoir and Apex Vpp-combo, core 1 CPU block and core AM5 performance kit. And replaced the cpu block/reservoir combo(s). Works a treat. Good stuff!
@stickyfingers97106 ай бұрын
Great story. How’s your temps under load ?
@miikasuominen38456 ай бұрын
@@stickyfingers9710 Well, I happened to check out temps on playing Alan Wake 2 last weekend: GPU 48, Hotspot 68 and CPU 55,8. Celsius, of course ;) That's with GPU at 2600 core and 1200mV. I run my 7800x3d with -30 curve optimizer on all cores, maybe I was lucky on silicon lottery, but I have not been able to get any errors, for example in OCCP's stress tests... I mean, temps are just excellent. And so far, I'm really, really impressed with VPP Apex-pump...
@theonlyredspecial6 ай бұрын
That’s impressive. Certainly worth doing especially with lower noise levels too.
@miikasuominen38456 ай бұрын
@@theonlyredspecial Exactly, lower noise level is the main thing. And knowing, that everything is serviceable and replaceable.
@Linuxdistro15-ih8ox6 ай бұрын
When you building it ? Are all the parts available ? Had problems getting some alphacool parts before
@pedroduarte50526 ай бұрын
That distro plate does not line up with the tubbing.... looks terrible... parts are nice though
@KitGuruTech6 ай бұрын
It's probably just the camera angle. It lines up perfectly.
@canarychrome70126 ай бұрын
nonsense and its 'tubing' not tubbing - its not a cooking channel.
@pedroduarte50526 ай бұрын
@@KitGuruTechif that is the case I take back my comment 😊 but they do like a bit off
@pedroduarte50526 ай бұрын
@@canarychrome7012glad you spotted my typo, just don’t know why you are being rude? Perhaps you are just a poor soul seeking your place or approval… sorry if my typo offended you
@barrychuckle25596 ай бұрын
Are your eyes painted on?
@lonelymtbrider33696 ай бұрын
Looking good!
@KitGuruTech6 ай бұрын
Thanks!
@robmasters35696 ай бұрын
I love the fans and considering what they're made from I don't think they're over-priced. Alphacool are killing it right now with pretty much everything. I've gone from hating the look of their gear to loving more than any other manufacturer.
@jonas0001116 ай бұрын
I feel the same way. I was the biggest EK fanboy forever but they have stagnated.
@AlphacoolGmbH6 ай бұрын
@@jonas000111 Thanks, nice to hear 🙂
@georgelowrielowrie54286 ай бұрын
Want!!!!!!!!!!!! Seriously, I have a first born son and/or a kidney! Let's make a deal!