Klipper - MKS Skipr - Part 3 - IT PRINTS! - Chris's Basement - 2023

It Prints!!! For our last official video in this series, we will install the hardware and build our configuration in Printer.CFG.
00:00 Introduction
01:21 Hardware
09:34 Printer.CFG
42:59 Conclusion
These are affiliate links and take you to Amazon.
------------------------------------------------------
GeeBat 460pcs 2.54mm JST-XH Connector Kit on Amazon:
geni.us/jYAAkk
Ferrule Crimping Tool Kit on Amazon:
geni.us/9T0N
Makerbase MKS SKIPR 3D Printer Control Board on Amazon:
geni.us/PIDWgI
Makerbase MKS TMC 2209 stepper drivers on Amazon:
geni.us/nDdAvy
SanDisk 16GB Ultra microSDHC UHS-I Memory Card on Amazon:
geni.us/zxts6V
WiFi USB Adapter for PC & Raspberry PI WiFi Dongle on Amazon:
geni.us/5nAy02
------------------------------------------------------
Helpful Links:
🔗🔗🔗🔗🔗🔗🔗
Klipper Github:
github.com/Klipper3d/klipper
Helpful videos:
🎞🎞🎞🎞🎞🎞🎞
Klipper - PID Tune - Dial In Your Printer
• Klipper - PID Tune - D...
Klipper - BL Touch - Auto Bed Leveling:
• Klipper - BL Touch - A...
Offset calibrate:
• Klipper - BL Touch - A...
SUPPORT THE CHANNEL BY CLICKING THESE LINKS!
Show your support by becoming a KZbin Member!
kzbin.infojoin
E3D Affiliate Link:
e3d-online.com/?aff=32
OpenBuilds - Great CNC and 3D Printer Parts (aff)
openbuildspartstore.com/?ref=...
Slice Engineering - Mosquito Hotends (aff)
www.sliceengineering.com/?p=r...
Wham Bam Systems Flexible Beds (aff)
bit.ly/2HoS1cV
Amazon (aff) [US DE GB CA IT ES FR JP]:
www.amazon.com/?tag=chrisbase...
Banggood(aff) ban.ggood.vip/7vm3
Aliexpress(aff) s.click.aliexpress.com/e/UrRbCm8
Buy me a coffee to keep me going!
buymeacoff.ee/Wc0DouFbl
You can support my work on Patreon
/ brotherchris
One Time Tips, You Can PayPal Me:
www.paypal.me/ChrisRiley3D
--------------------------------------------
Find Me On Social Media!
--------------------------------------------
Twitter : / chrisriley3d
/ chrisriley3d
profile.php?...
/ chrisriley3d
FTC Disclaimer: A percentage of sales is made through Affiliate links
As an Amazon Associate I earn from qualifying purchases.

[@fgil45]

Thank you very much!, His way of explaining is very encouraging, I started from 0, and it is so easy to understand him.(and with translated subtitles) is big!

[@ChrisRiley]

I'm happy to help! Thank you for watching

[@benrampolla1415]

I thought I was in way over my head but this series saved me! Thanks!

[@ChrisRiley]

Glad to hear it! Thank you

[@TDHobbies]

I have nothing to say, just want to get a comment in early! 😆. I’ll get to watching when I get outta work. Thanks Chris 😊

[@ChrisRiley]

🙂👍 Thanks for watching!

[@zakspop]

So what is the voltage supposed to be coming out of the endstops. I'm getting @.05v. I thought they were supposed to be 5v.

[@ChrisRiley]

It depends on the board, but you should get 5v when it's triggered from the GPIO pin. You can flip that in the firmware as well.

[@Prt_3D_RC]

Thank you for improving over the years on your content information and how you present it. Is it posable to do a Klipper video on a 3 in to 1 shared nozzle setup with a BTT Octopus with a non Pi like a Rock Pi4? This will help me solve the extruder setup and how to get the power function to work on a non pi... I can not get access Via Klipper to the Rock Pi 4 GPIO ports.... (cli commands work good) I am tired of have to use the SD card to print in Marlin VS the usb due to the protocol overhead on the usb bus, printing faster then 90mm/s.... I fell in to the rabbit hole of klipper and ran out and back to Marlin for a few jobs I had to print. I solved all but the 3 in to 1 and the power issue (the power issue I did find a workaround , but not what I wanted) If you can help me understand the 3 in to 1. Not just coding but how / why the code works that way. I will make sure I "Like" it.

[@ChrisRiley]

I try to do my best! 😀 I will look around and see what I can find to test a config like this. Thanks for the suggestions.

[@Prt_3D_RC]

@@ChrisRiley Thank you.. If it helps I can send you my work in progress. I just am at a blocking point of my experience in this.

[@_L--ye9iq]

Hey Chris I realy like you MKS Skipr install videos. I used this series to set up my board. I have a question, can you make a video about how you setup an EBB 36 CAN- Thoolhead Board on der MKS skipr. I already searched on google but I couldnt find a good howto (and I am bad at coding). So if you or someone else knows a good instruction or a vid I would realy appreciate it if I can get to it.

[@ChrisRiley]

I've never done any videos on the tool boards yet, but I need to. I will look into this one.

[@ryannnn_nelson]

goddamn can a brother get some zip ties.. a bread tie a shoelace whatever to clean up those wires lol

[@ChrisRiley]

Lol! I've never been very good at keeping house!

[@DoctorValium]

If you set position_min to -33 you can set position_endstop to -33, then 0 would be correct for the y-axis.

[@ChrisRiley]

Awesome! Thanks for the tip!

[@douglaseduardo4618]

Hello Chis. Very good explanations on all your videos. I'm having a crash with this messagem "Unable to read tmc uart 'stepper_x' register IFCNT". I have a TMC2240 and i can't find how to make the jumpers and the kippler configurations! Hope you can help me.

[@ChrisRiley]

Thank you! I don't know much about the 2240's yet, my guess is they have a different set of pins they use to talk to the board. I will see if I can get some info on them.

[@Skidtire]

Any chance you can make a video of using BLtouch with these boards? upgrading from a SKR Mini e3 v2 and am lost on how i should attach this sensor Thanks!

[@ChrisRiley]

I'll see what I can do!

[@Skidtire]

@@ChrisRiley appreciated, your videos helped me to my first marlin compile and flash and now these videos have been invaluable in helping me learn klipper, thanks a ton!

[@Skidtire]

@@ChrisRiley Upon looking heavily into the topic there is a 3 pin header on the board marked 3dtouch next to the two LCD headers, After hooking the control,5v and ground to that header and the switch and ground pins to an endstop header and defining the sensor pin to ^PA13 and control pin to PA8 under [bltouch] aswell as setting Z endstop to Z_virtual_endstop now everything works perfectly, hopefully this information can help somebody else.

[@user-cu4os6wk7v]

This is my first attempt at anything like this. Very overwhelming, but you break it down so that I can follow you. However, I am stuck. My sensor is not stopping the z axis. When I try to home it, it crashes into the print head and continues to try to move up until I hit the emergnecy stop. I have adjusted teh z offset all the way to 5 mm after rechecking all the steps up to this point. Nothing seems to be working. Please help!

[@nonyabusyness2215]

Still can’t get past this part. If anybody has any ideas, that would be awesome. I have the original tronxy tr sensor that came with it if that helps.

[@user-cu4os6wk7v]

I figured it out. The tronxy TR sensor is not 5V. I changed the sensor to the Z+ slot, changed the pin to PB14, and changed the the Z+ jumper from 5V to VIN.I can now home all.

[@ChrisRiley]

Great! Thanks for watching

[@pieroandrecastilloarohuanc7705]

good evening, I'm getting the TMC error 'stepper_z' reports error: DRV_STATUS: 40190004 s2ga=1(ShortToGND_A!) cs_actual=25 stealth=1, I'm using the tmc2226 drivers, 24v 1.3A 0.9° nema17 motors, I really don't know to do

[@pieroandrecastilloarohuanc7705]

ya encontre el problema, resulto que el driver del eje z estaba dañado

[@ChrisRiley]

Me alegro que lo hayas solucionado. ¡Gracias por ver!

[@pieroandrecastilloarohuanc7705]

@@ChrisRiley gracias a ti por dar una explicación tan detallada hace tiempo que tenia la palca mks skipr pero siempre me daba errores, pero con lo que vi en tus videos me aclaraste muchas cosas excelente serie espero poder ver mas sobre la placa mks skipr

[@ChrisRiley]

@@pieroandrecastilloarohuanc7705 ¡Más por venir!

[@reasonablebeing5392]

Great video but it seems like a steep climb. It would be great if there was an "EZ Klipper" interface / compiler so I just entered what I needed and it did the rest.

[@ChrisRiley]

Great suggestion!