Well, in short, that's one of the best instructional vidoes I've ever watched in my life! I'm literally at the moment installing a one, and was extremely anxious about installing it properly to be perfect, didn't know about the adjustments!!
@hamzasattar84173 ай бұрын
youtube.com/@hamzasattar8417?si=cUHoRbhFxm8igsc0
@billstrzempek7045 Жыл бұрын
Thanks - came here after being confused by the Ikea bag cartoons for assembly that I could not figure out - I see now it is for the adjustments to level in different directions - this video is really a frustration resolver, thank you!
@hamzasattar84173 ай бұрын
youtube.com/@hamzasattar8417?si=cUHoRbhFxm8igsc0
@loushared66026 жыл бұрын
I was assembling one of the larger TV benches with a combination of drawers and cupboards. This and other videos made by you was a flatpack lifesaver for me. Also very refreshing it's not a timelsapse like so many others. I was having real trouble with the alignment. It would never have occurred to me to tweak the different screws to get everything just so. I watched it a couple of times and paused as I completed each stage of assembly. Thank you, k-nemo, even more impressive you did this with protective work gloves. Kudos!
@k-nemo6 жыл бұрын
Thanks a lot for a very encouraging comment. I'm glad the films were useful
@MsFolkGirl2 ай бұрын
Total lifesaver! The descriptions are just aweful! Thank you for helping me out
@k-nemo2 ай бұрын
Thanks a lot for watching.
@farelapizzaincasa3 жыл бұрын
Sei il numero 1 in 2 minuti mi hai spiegato tutto quello che Ikea non era riuscito a spiegare. Grazie
@samchinosld5 жыл бұрын
total lifesaver if i came here on line when i first started i wouldnt be here still trying to put it together hours and hours later fab video
@k-nemo5 жыл бұрын
Thank you a lot for a nice comment
@christopherglvz46382 жыл бұрын
Thank you so much, had this besta for years with pennies under the door, 30 seconds later after watching this vid no need for the pennies
@k-nemo2 жыл бұрын
Thanks a lot for watching :)
@lealanswanson9806 жыл бұрын
Like the magnification and lack of commentary. That made it easier to follow. Good job!
@k-nemo6 жыл бұрын
Thank you.
@stephenconnolly59042 жыл бұрын
This has just saved my life. These hinged are the worst thing I've ever come across
@anmael35445 жыл бұрын
Thank you for showing the fine adjustments. No one else is doing that. Thank you!
@k-nemo5 жыл бұрын
Thanks a lot for your comment. It's great to hear that you liked the film
@icee07114 жыл бұрын
Thank you so much for that part where you showed how to adjust the doors very thoroughly
@k-nemo4 жыл бұрын
You're very welcome!
@jordanlynne33068 ай бұрын
Thank you for this video! You're out here making the world a better place ;)
@k-nemo8 ай бұрын
I hope I helped.
@LoriKalbfleisch5 жыл бұрын
Saved my Saturday! And my living room. And for sure my sanity! THANK YOU!!
@k-nemo5 жыл бұрын
It's great to hear it. Thanks a watching
@enriqueparedes29194 жыл бұрын
Thank you k-nemo, you make it easy to understand how to install and adjust the hinges for the doors. Excellent video.
@k-nemo4 жыл бұрын
Thanks a lot for a lovely comment
@Bactube023 ай бұрын
Merci de France de Paris même 😊 Vous m'avez beaucoup aidé. Ikéa est partout dans le monde et votre video a aidé et aidera encore beaucoup de gens 👍 PS : Je m'abonne à votre chaîne 👌👍
@emmaslow4 жыл бұрын
Wish I’d thought to look for a video explaining hinge adjustment years ago! Mystery solved - thank you 🙂
@k-nemo4 жыл бұрын
Glad it helped!
@irishka_zolotse2 жыл бұрын
Thank you for your avatar and the very educational video, God bless you and all yours!!!!
@rennington4 жыл бұрын
Thanks you so much for this. Mine came without instructions. I’m usually good with stuff like this but this video really helped a great deal. Fantastic
@k-nemo4 жыл бұрын
You're welcome! Thanks for watching and leaving a lovely comment
@bachelinejoseph40805 жыл бұрын
K-Nemo, awesome video! Concise, real-time, your video demonstrates what simple assembly really looks like. Thank you!
@k-nemo5 жыл бұрын
Thanks for a nice comment. It's great to hear you liked the film
@daniellagonzalez76082 жыл бұрын
Omg! Thank you! We were going to return untill we came across your video!
@k-nemo2 жыл бұрын
Glad I could help!
@stuartross56863 жыл бұрын
Really helped to see it done visually. All good . Thank you
@k-nemo3 жыл бұрын
Glad it helped
@LoveMySpeedy Жыл бұрын
You saved my marriage
@k-nemo Жыл бұрын
Great to hear it :)
@ferhatelarslan72015 ай бұрын
😂
@Bactube023 ай бұрын
😂😂😂😂👍👍🙏
@JasmineeBD6 ай бұрын
Thank you so much, this video really helped me out!!
@ArianneBossers9 ай бұрын
At the end you will mount the iron items for the shelf, but is this necessary ? Or how much weight can this one have? (5:22 minute)
@k-nemo9 ай бұрын
Shelves adjacent to the door are installed on this. The same shelves adjacent to the back of the frame are installed on other hooks. The shelf is narrower than the frame. www.ikea.com/gb/en/assembly_instructions/besta-shelf-dark-grey__AA-1227320-2-2.pdf
@ArianneBossers9 ай бұрын
Thank you for your explanation! 🎉 this was not in our instructions! That makes sense!
@Thedogisero3 жыл бұрын
You are a friggin saviour! 🙏🏽 Excellent video
@k-nemo3 жыл бұрын
Thank you
@Tephnos4 жыл бұрын
One issue I had with a taller frame is that the hollowness of the frame let the sides 'bow' out slightly, even with the shelf support pegs screwed in that stop that happening (as there's some tolerance flex still). So when I installed my doors, I had to use the side to side adjustment to fix the doors from sagging. Worked, but also meant that the doors stick out past the frame on the opposite side from the hinge. Should I have just stacked smaller frames?
@LLpp263 жыл бұрын
Hola! Sabes si se puede poner las bisagras sin instalar la parte de abrir a presion? O necesariamente debe llevar esta apertura y no se le pueden colocar tiradores y abrir normal? Gracias! Un video muy ameno y bastante claro!
@k-nemo3 жыл бұрын
1:36 No tienes que instalar esto.
@CityPriestess5 жыл бұрын
I love the music and the thoroughness .... but I needed captions to explain how to raise/lower and level the doors. That’s the tricky and frustrating part. Everything else is self explanatory.
@k-nemo5 жыл бұрын
Thank you for watching and leaving a nice comment. It is a fair observation, but I though at the time the explanation is clear enough. Have you managed to regulate the doors eventually? I showed how to do it again in another film, if you want to check this one it might help: kzbin.info/www/bejne/rJq1gX5uqb11qZo
@1chom103 жыл бұрын
Great video! Awesome job on the step by step tutorial. How do I level the shelf to the top of the door? I have a small level difference
@k-nemo3 жыл бұрын
Maybe the cupboard is not horizontal?
@americatoken33343 жыл бұрын
I just finish installing my first 4 Besta but doors looked crooked so hope I can fix that!
@k-nemo3 жыл бұрын
What a shame!
@AnotherSpecialEdMom5 жыл бұрын
This is the best video I found. Thank you so much. I don’t know what I would have don’t without your help!
@k-nemo5 жыл бұрын
Thanks a lot for watching and leaving a lovely comment, I'm really happy the video was useful.
@LuvableCharlin2 жыл бұрын
Thank you so much, surely kept me from going crazy. ;)
@k-nemo2 жыл бұрын
Glad it helped!
@elatheone45305 ай бұрын
What is that silver thing in the end of this video for? I am building a shelving unit, but i don't understand. Is it holding a shelf?
@k-nemo5 ай бұрын
This is used to attach shelves that are closer to the front of the cabinet. So that there are no gaps between the door and the shelf.
@paintedredmartian2 жыл бұрын
Incredibly helpful. Thank you!
@Silva_Surfr2 жыл бұрын
At 4:27 of the video... What is that part number support peg that's getting screwed in. I need to order those to stop the bowing of my Besta shelving unit.
@anagomez67052 жыл бұрын
Muchas gracias, aunque a mí no se me cierra bien la puerta, ni siquiera girando la tuerca del dispositivo como lo haces en el vídeo 😕😕😕
@k.Newbbie3 жыл бұрын
Very detailed video 👌🏽 Thank you x
@rickheusdens465310 ай бұрын
what do these things @4:58 add since the plank is already resting on the smaller mounting pins (?)
@k-nemo10 ай бұрын
For door shelves that are moved forward. The others reach the back panel and are mounted with smaller mounting pins.
@k-nemo10 ай бұрын
The shelf is narrower than the frame and there would be a visible gap near the door.
@darinakalinova21804 жыл бұрын
Hey K nemo great job. Thank you. Job done.
@k-nemo4 жыл бұрын
Thanks and welcome
@bricago23025 жыл бұрын
Most of those "Phillips" screws are actually Pozi-Driv screws (PZ-1, PZ-2). Make sure you use a PoziDriv bit on your screwdriver or else you'll strip the screw heads. Five years of experience talking here. I recommend a driver/drill on a low to medium torque setting instead of a hand tool. It'll save you a lot of time. Good decision to wear thin work gloves too. Assembling this stuff is painful enough without the metal edges carving up your skin.
@k-nemo5 жыл бұрын
Great suggestions. Thanks a lot for watching and a useful comment
@jimmyjimmy10543 жыл бұрын
Nice vid would have liked a bit of led zep though
@k-nemo3 жыл бұрын
Next time! Thanks for watching
@YoNicePaprika11 ай бұрын
1:57 The spring thing refuses to work on the bottom door. The 2 on top work fine but it doesn't keep the bottom door closed and the spring thing just stays pushed in if we try to force the door closed. We've tried turning the cap thing like you did but nothing's working :( I see you're still responding to comments and stuff, hoping you can help!
@k-nemo11 ай бұрын
Try pressing the springs with your finger, maybe some are defective and need to be replaced.
@YoNicePaprika11 ай бұрын
@@k-nemo Okay! Was hoping maybe we just did something wrong and it can be solved at home. But looks like we'll have to run back to the store after all 😅
@mizsab3653 жыл бұрын
just what i needed - thank you
@k-nemo3 жыл бұрын
You're welcome
@mizsab3653 жыл бұрын
@@k-nemo I wonder if you could help me, I have the 180x42x64cm Besta and in the instructions on page 24 they say to join the 3 units together using 2 screws, is this the only thing to join them together?
@k-nemo3 жыл бұрын
@@mizsab365 It will be enough
@mizsab3653 жыл бұрын
@@k-nemo Ah ok thank you
@bpxo38663 жыл бұрын
Is it possible to complete unscrew the hinges off the besta frame so I can put it on a different one?
@RD-kb9xx3 жыл бұрын
I find that when I adjust my self to line up correctly that I've had to unscrew the top adjuster and tighten the bottom one so much the the hinge side is now out of line. I just can't get all 4 corners looking level and flush
@shirinatarod35178 ай бұрын
Thank you. It was helpful
@k-nemo8 ай бұрын
Thank you!
@bennieleip5792 жыл бұрын
The last part for the shelf does there go a screw in the shelf or not ? I dont see a screw for it🤷🏻
@k-nemo2 жыл бұрын
It should be included. Ask in the store.
@CherieMoore-c9p Жыл бұрын
Why does that shelf bit at the end come in the bag with the hinges?? I don’t even have any shelves. Spent 15 minutes looking at the pictures trying so work out what it was for!!
@secession773 жыл бұрын
It’s such a shame that besta drawers don't have such 3 axe adjustment system. All my doors are perfectly leveled and then there are drawers which ruin that grid :/
@derburgermeistervonwesel45803 жыл бұрын
2:02 this was the moment I needed to know. You don't find it on the ikea Manuel 😩😍
@oscarjustovito96453 жыл бұрын
Quedaría bien sujeta una puerta con solo las bisagras de arriba y abajo? La del medio no la puedo poner porque tengo los agujeros ocupados 😅
@k-nemo3 жыл бұрын
No vi la bisagra en el medio. ???
@oscarjustovito96453 жыл бұрын
@@k-nemo perdón, he visto tantos videos que ni me fijé que está solo tenía 2, la mía es una puerta de 1.95m y lleva 3 😅
@ShellSnell2 жыл бұрын
How the hell did you get your screws to screw in at 0:54? My screws just don't want to turn, and I'm clearly doing something wrong because every unit is like this for me.
@k-nemo2 жыл бұрын
Maybe you have defective hinges?
@ShellSnell2 жыл бұрын
Nah I'm just an idiot. I was using a wrong screw driver head. A standard phillips didn't cut it I guess. Odd.
@heatherbennett57563 жыл бұрын
sooooo helpful! thank you!
@k-nemo3 жыл бұрын
You're so welcome!
@isaac_glover2 жыл бұрын
Thanks for the help
@k-nemo2 жыл бұрын
Happy to help
@lisahynes81044 жыл бұрын
Fantastic Video
@k-nemo4 жыл бұрын
Thanks for watching and leaving a lovely comment
@iamaidens2 жыл бұрын
You’re a hero
@lllovegunlll79073 ай бұрын
What's the point of the IKEA 'push out' mechanism that comes with the soft-close hinges? It helps the door to open. I understand that. But this mechanism prevents the door from closing completely if you have soft closing hinges like in your video. Now, those doors won't close unless I push them closed which defeats the purpose of the soft-close hinge. Totally useless.
@k-nemo3 ай бұрын
@@lllovegunlll7907 kzbin.info/www/bejne/oqWZaI2HlLyghrcsi=J27Eb7cuUKBCc5Hn You don't have to install a mechanism that needs to be pressed by hand. Then the hinge will close the door.
@Mr007iraq4 жыл бұрын
Thanks that was useful 👍
@k-nemo4 жыл бұрын
Glad it helped
@MarciaAlmeida-mu1ki Жыл бұрын
Minhas portas n ficam certinhas niveladas, algum segredo ?
@k-nemo Жыл бұрын
Mostrei no vídeo como ajustar.
@endgamecg98565 ай бұрын
Thank you❤
@yvesbreemersch71232 жыл бұрын
Excellent!
@k-nemo2 жыл бұрын
Many thanks!
@LoneWolfTheGamer1305 жыл бұрын
Thank you very much.. This video helps me so well... 👌🏻🙏
@k-nemo5 жыл бұрын
It's great to hear it. Thanks for watching and leaving a comment
@amandinel12353 ай бұрын
THANK YOU !
@k-nemo3 ай бұрын
Thanks for watching.
@superman122120124 жыл бұрын
Great video!! I want strong shelf pins for heavier objects, what would you recommend?? Also, at the end of the video you showed 2 different shelf pins, where did you get the 1st set from??
@k-nemo4 жыл бұрын
Thanks for nice comment. All used pins are included in the set Ikea Besta.
@ciaoqiao53343 жыл бұрын
so helpful!!!! ty!!!
@k-nemo3 жыл бұрын
Glad it was helpful!
@realjoker15683 жыл бұрын
I have an issue with the hinges: the soft closing mechanism for the ones mounted on the left side of the besta don't work. Could you please tell what could be the reason?
@k-nemo3 жыл бұрын
kzbin.info/www/bejne/oqWZaI2HlLyghrc Try to adjust
@realjoker15683 жыл бұрын
@@k-nemo thanks but I was talking about the hinges not the push to open mechanism...
@mariangelamary5 жыл бұрын
Thank you! Super instructions!!!!
@k-nemo5 жыл бұрын
Thanks a lot for your lovely comment
@Mospeada765 жыл бұрын
You. Rock. Thank you!
@k-nemo5 жыл бұрын
thanks
@amirulafifi8562 Жыл бұрын
very helpful
@k-nemo Жыл бұрын
Glad you think so!
@RtoipKa5 ай бұрын
what if my door top is not horizontal? I can't make it horizontal.
@k-nemo5 ай бұрын
Maybe the frame isn't rectangular?
@MselleDinochon2 жыл бұрын
Merci! C’est super utile!
@SteveCobrin Жыл бұрын
Would have been great but the end was truncated and obscured before fully showing the whole of the fitting of parts 115442 & 115444. It would have been nice to have had some commentary of captions
@annemarieluikens39205 жыл бұрын
Lifesaver!
@k-nemo5 жыл бұрын
Thanks
@stefankardaszewski80254 жыл бұрын
Dobra instrukcje ale sama w sobie regulacja ehhh trzeba mieć trochę wprawy kręcąc srubkami...
@k-nemo4 жыл бұрын
Training!
@foowishamewican4 жыл бұрын
I think those plastic things are for dampening the bounce of the door
@k-nemo4 жыл бұрын
They are
@foowishamewican4 жыл бұрын
@@k-nemo I couldn't even get mine in so at the moment the door is bouncing on the soft closure
@k-nemo4 жыл бұрын
@@foowishamewican Is it problem 1:53? Try 2:01.
@foowishamewican4 жыл бұрын
@@k-nemo I'll try that thanks. I think those plastic things should take some of the bounce
@Vladdie7774 жыл бұрын
@@k-nemo Mine didn't come with the plastic tacks to fill the holes? Did you have them yourself?
@jennyw1523 жыл бұрын
Danke!!
@ezgimadran35098 ай бұрын
I succeeded all the instructions but I can''t make the press&open button work properly.do you have an idea about it? Cause unfortunately this video is useless
@k-nemo8 ай бұрын
Maybe you have the new version of runners? kzbin.info/www/bejne/sGSpc5ypqLicfdE
@josetroya10203 жыл бұрын
Grazie mille
@k-nemo3 жыл бұрын
Prego
@TheRossytop4 жыл бұрын
Geniooooossssssss!!!! Los ame!!!! No me cerraba la puerta jajajajajajajaj
@k-nemo4 жыл бұрын
Thanks for watching
@TheFunnyPlayer2 Жыл бұрын
2:05 I don’t like that they bounce so much
@lillivanilli40763 жыл бұрын
Lieben dank
@k-nemo3 жыл бұрын
Geen dank😀
@availabilityAZ4 жыл бұрын
This is all pretty self-explanatory, except for those mysterious little clips. But the end of the video -- in which it becomes clear what they are for -- is utterly obscured by the links to other videos :/
@k-nemo4 жыл бұрын
Thanks for watching and leaving a nice, fair comment
@lindajellicoe77854 жыл бұрын
I do not understand the purpose of the four (2 left, 2 right) metal pieces that are the last things installed and exactly where they should be installed reltive to the shelves. My Bestå system has 12 doors, so it's' important to get this right the first time. BY the way, the video suggestions of other related videos blocks this part of the install. Very useful otherwise. Thanks!
@k-nemo4 жыл бұрын
Thanks a lot a lot for suggestions and leaving a useful comment. I used for metal pieces for every shelf to make it stable.
@jeffreysneezos5 жыл бұрын
Like if you're in the middle of a move. We got this!
@victoriaarcturus2034 жыл бұрын
You need to slow down and explain what you’re doing a lot of people having issues and you’re not pointing out what the issue is my hinges don’t fit into the door like that the way yours have
@k-nemo4 жыл бұрын
Can you please tell me the time and I will try to help you.
@shubhamkaushal586 Жыл бұрын
Zoom it out !!
@yonatanmatos943716 күн бұрын
Ese truco no esta en el manual.! Jajajaj
@mathiyceyuka50893 жыл бұрын
👏👉💯
@k-nemo3 жыл бұрын
Thanks for watching
@maryd52318 ай бұрын
I never understand why people make instructional videos without sound. Would you not say a word when showing someone how to put this together??