here you go: drive.google.com/file/d/1K7K7fZIrOXifWIju6eWJOcMkmxK32rTP/view?usp=sharing
@winterprizon47982 жыл бұрын
@@Koss-channel Thanks!
@THESLlCK2 жыл бұрын
@@winterprizon4798 you couldn't figure this out yourself??
@alengebles7582 жыл бұрын
@@THESLlCK the fuck is your problem??
@CarlAquaForce2 жыл бұрын
@@THESLlCK I'm glad he asked actually.
@ddervish2 Жыл бұрын
That recessed pin placement was perfect
@olhamartynyak87402 жыл бұрын
Incredible! every single step looks so easy, but I can't imagine how it is really hard to create and then to produce it. Bravo!
@Koss-channel2 жыл бұрын
thank you =)
@thejackpot69282 жыл бұрын
@@Koss-channel When will you make an OTF knife
@MrParker_12 жыл бұрын
Easy? Cutting that channel with a jewelers saw would have been the biggest test of my patience...
@johnparsons90842 жыл бұрын
Was just going to comment on that. Picking up the jewelers saw at the start of that cut....that channel must have seemed like the Grand Canyon. Doing the whole thing without a mill....just remarkable. Lad has skills. Michelangelo with an angle grinder.
@angrytom1923 Жыл бұрын
@@MrParker_1 Yeah, at first I was surprised he didn't use an endmill there, but then I realized his mill might not have motorized CNC axes. I can't imagine how long that took.
@42Hertzer2 жыл бұрын
Nice design! Can imagine a spring loaded ball-bearing with a indention closed and fully open would give a nice tactile feedback if implemented. Not that I would have the knowledge to achieve it my self but a master craftsman as you could probably pull it off... ;)
@erso33022 жыл бұрын
Was thinking the same thing. A detent on the back-right corner and some knurling on the surface.
@BenjaminSteber Жыл бұрын
As nice as this design is, it would want it to have a locking mechanism. Even a minimal indent catch at the base of the knife would make the blade more sturdy in the hand.
@infinimetrical Жыл бұрын
I can see this as well. One for opened and closed. It would help with safety. Could likely put one or two at the base of the handle that activates by pressure of the thumb for opening and closing, it can be housed behind the brass cuff held down by pins, and blocked by the framing. Another way, and initially crossed my mind is around the swivel assembly. Small, but strong spring and stainless steel pin that resides and works copacetically with the slide. Pinning to the frame only enough to hold it in place without completely locking it. The pin concept could also be used with the first model. Strong magnets are a potential, however, magnets can lose their energy through time, and sometimes are not good for certain areas or work. In other cases, magnets are also great for survival situations. Adding more brain tools in everything carried.
@damianolak8290 Жыл бұрын
Respect for hand cutting lock groove!
@ryanblystone51532 жыл бұрын
The fact that you do this without super expensive precision machinery is inspiring. Thank you
@biddinge88982 жыл бұрын
He makes sanding look so easy
@pjhalchemy2 жыл бұрын
Really excellent videography! You've stepped up your game Koss! Well done grinding on such a stubby and the idea of a semi lock with the pin when open is ingenious! Thanks for all you bring!
@johng41752 жыл бұрын
Absolutely love all of your designs. I find your videos a freshing rechange from constantly seeing these huge knives that I would never personally carry. Keep up the good work 👍
@KeredAglo11 ай бұрын
Yes, I feel the same. Clean simple minimalist design that let's the movement of the knife speak
@andrewnelson44962 жыл бұрын
The fit and finish of the pieces that you make are unbelievably precise and tight!
Cool design. Definitely something I would add to my collection.
@dragonrestoration28112 жыл бұрын
You are so talented. I could watch these all day
@TheGreatSnafoo Жыл бұрын
Looks as if it's probably one of the safest knives to open and close I've seen.
@RowToney2 жыл бұрын
This is like the thrust bearing of balisongs
@CarlAquaForce2 жыл бұрын
One of those posts where I find myself watching every little detail. Nice work.
@chakireladraoui93312 жыл бұрын
Good my friend
@alexobrien44662 жыл бұрын
Beautiful, functional art.
@kulebyakinjoe2 жыл бұрын
WOW, THAT'S QUALITY!!!
@WockToPoland Жыл бұрын
Masterful, one of the most original knife makers I've seen.
@zzAleksandrzz2 жыл бұрын
Шедевр !
@creativeinhead9652 жыл бұрын
Whoa, someday I'll make such sharp objects :)👍
@MrV2u2 жыл бұрын
That’s some fine craftsmanship right there. Great work brother.
@marylewis3311 Жыл бұрын
Really nice fret sawing. 🙏❤️🙏
@artofchickens Жыл бұрын
Awesome video to watch at 2AM!
@llaappiiss2 жыл бұрын
И задумка и исполнение, как всегда на высоте!
@SlimakaGS Жыл бұрын
Шикарная работа! 👍
@NedimTabakovic2 жыл бұрын
MagBlade brother 🔪⚔️
@stoyanatanasov80122 жыл бұрын
Satisfying as heck!!!!!!
@scottwallace48642 жыл бұрын
Oh man, I love your work.
@vcommandarv5916 Жыл бұрын
It's a brilliant design but it need a back spacer/barrier to protect the fingers from the blade's edge when in the closed position
@glenpaul36062 жыл бұрын
Very Kool knife. Great job in building it...quality workmanship.
@lolcec812 жыл бұрын
Комментарий в поддержку канала и ролика, а также труда мастера.
@wonderboy3513 Жыл бұрын
Awesome build, and great video, very professional as always. Always looking forward to more of your videos, keep them coming;)
@nasusmain75112 жыл бұрын
Interesting Design, futuristic as always
@skcrary2 жыл бұрын
This is one of my Favorite Designs of yours!! Well Done!!
@rhodie332 жыл бұрын
Very cool, I want one.
@vonHannersdorf2 жыл бұрын
Very beautiful little knife. It would fit in my pocket, haha.
@bigdadgigachad30422 жыл бұрын
Really love your knives. This one came out amazing as well. So good 🔥🔥🔥
@jerryjohnsonii41812 жыл бұрын
Impressive !!!!!!!!!!!!!!!
@NineteenEighty82 жыл бұрын
amazing work. ignore those clowns downvoting, they are most likely downvote bots from a jealous rival channel.. sure this isnt exactly blacksmithing but still amazing work. atleast you never claim to be a blacksmith like some of these guys who angle grind most of their knives.
@billdoolinofficial Жыл бұрын
This is amazing. It looks like a flash drive. ❤
@futabaisekai44922 жыл бұрын
Fine cuts
@АнтониоПетров-я7щ2 жыл бұрын
Дорогой Брат, отличная идея от замысла и до воплощения!!! Шикарное перо получилось!!! Не хватает только клипсы, для удобного ношения на ремне!!!😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺
@CaratacusCadeyrn Жыл бұрын
Awsome design and execution!
@godsangryhands4499 Жыл бұрын
Aaas Usual.. I Want IT! Thats sooo unique! Thanks
@frankmoreno6866 Жыл бұрын
I applaud you sir! You have real skills
@siriosstar47892 жыл бұрын
This knife has such a simple yet beautiful look to it . it looks like it would fit perfectly in one's pocket . Very nice 👍
@TheRealLongname2 жыл бұрын
If it could lock in place it would be legendary
@willota34502 жыл бұрын
man itss really awesome
@MCsCreations2 жыл бұрын
Beautiful work, dude! Really well done! 😃 Stay safe there with your family! 🖖😊
@wgemeinhardt Жыл бұрын
Really nice work. Great design.
@fotticelli2 жыл бұрын
Beautiful design.
@johnbradford92352 жыл бұрын
Beautiful little unit that is mate 👍👍👍. 😎
@strokerace54682 жыл бұрын
Pretty cool
@pepechenogug Жыл бұрын
🎉🎉🎉🎉🎉🎉🎉 I love it.
@e804c Жыл бұрын
Kinda like a small chunky version of the DailyCarryCo. Magblade, awesome knife man👍🏻
@polarixmusic65762 жыл бұрын
i wanted this is art omg i buying this knife
@MrTeklar2 жыл бұрын
What a nice little nugget!
@ВиталийЮдаев-щ9я2 жыл бұрын
Очень оригинально! С удовольствием себе такой приобрел бы!!
@brianrossi46792 жыл бұрын
Very cool.
@simonblack42032 жыл бұрын
That was really sneaky......
@nico-max2 жыл бұрын
Super cool excellentte idée bravo 🥂
@sundaynightdrunk2 жыл бұрын
Really clean work. If only you could open it with one hand, but it looks very solid.
@rossideas58842 жыл бұрын
Good jop bro
@haraldsteffens42932 жыл бұрын
Great Work!
@Olya.Pavliiuk2 жыл бұрын
Wow! Very nice job 👍
@bokusimondesu2 жыл бұрын
Beautiful
@saifuldarussalam33222 жыл бұрын
Amazing bro!! Great Job!!!
@거리에서-n2h2 жыл бұрын
끝까지 보게 되는 영상...
@anatineduo42892 жыл бұрын
Nice work on that arc slot!
@ahiruppoi2 жыл бұрын
cool knife
@odinson_28142 жыл бұрын
Как всегда, превосходная работа!👍
@TSchulzeMasterClimb2 жыл бұрын
(in portuguese) Obrigado por compartilhar! Saudações do Brasil!
@dixonqwerty2 жыл бұрын
Really nice!
@ИванСтаров-ы7х2 жыл бұрын
Фантастика!
@cashel11112 жыл бұрын
such a simple mechanism, and looks very clean! Well done that thing is gorgeous
@dillwoggett86982 жыл бұрын
Good job
@mrgallbladder2 жыл бұрын
3:37 this is where I would just give up.
@sans-bg8jj Жыл бұрын
Работа с лобзиком, адский труд!
@sebroots66372 жыл бұрын
Magnifique ; ) Bravo champion👍
@craigbird81912 жыл бұрын
AWESOME!
@-dystopic-2 жыл бұрын
Such a cool knife man, awesome job!
@philippehillion72942 жыл бұрын
Excellent... Good Job...I want one please 😜
@rangvang202 жыл бұрын
good
@ed.sol.crafts2 жыл бұрын
Thank you for sharing! I will definitely make a version of this!
@kashanshoukat18682 жыл бұрын
Impressive 👍
@Hm_am00 Жыл бұрын
Amazing
@setoace Жыл бұрын
would love to see a karambit version of this.
@الأسطورة-ط9خ2 жыл бұрын
عمل رائع جداً أحسنت 👍👍
@johnkennedyswenja2 жыл бұрын
I like it.
@scdub Жыл бұрын
Very cool! Well done!
@Niksow2 жыл бұрын
Can we have the drawings to try and make one. Incredible work!!!
@maxo97112 жыл бұрын
good job
@jamesleighwoodansteel99692 жыл бұрын
Very nice 👌
@resurgam_b72 жыл бұрын
Grinding and drilling titanium, cutting 3/16ish steel with a jeweler's saw, a full flat bevel; are you doing penance for some horrible sin or do you just enjoy torturing yourself and your tools :P Jokes aside, that is, as always, a very handsome a knife, excellent work!