Knife Making - Forging a Brass Mai Knife

[@JamesMPogue]

I believe this is a first for me to see the use of brass in lieu of copper, it is a beauty. Keep innovating.

[@MakerHA]

Thank you so much my friend. It was the first time I did this too. I thought it would work and it ended up working. 👍👍👍

[@SamJac55]

Great blade. I love your minimalist set of tools. Just goes to show how much you can accomplish without big fancy equipment.

[@MakerHA]

Thank you my friend. Yes, unfortunately I don't have conditions to buy better equipment, so I do it with what I have, which on the one hand is even good, which makes us think a little about how to do something without having the tool. 👍👍👍

[@darrengriffiths2372]

Hi sir 👍👍hope that your well my friend godbless you wow i lv the stilye of that knife sir amazing job lvly out come sir amazing job friend 👍👍thank you so much for your time please be dafe friend god🙏bless happy heath and untill next time my friend please be safe lv out to you your family and happy forging sir 👍👏👏👍keep the faith bro😁

[@MakerHA]

Thank you very much my friend Darren 🙏🙏🙏👍👍👍

[@daviddingus8575]

There needs to be a badass button because that is awesome

[@MakerHA]

Thank you so much my friend 👍👍👍

[@redbearworkshop3219]

Definitely very interesting. Didn't thing brass was able to be forged with steel. Then again you can do it with copper too.

[@MakerHA]

Thank you my friend. Yes, you can do it with copper, which also works, I already made a video doing it too and it worked. 👍👍👍

[@jaydaplug3906]

do a twisted damascus billet then add brass via a sand mai

[@MakerHA]

That would be beautiful to see. But I'm still too inexperienced to make apricots. I still have to learn how to make the twisted damascus. Then yes I can try to do this sam mai 👍👍👍

[@stansmith1911]

That is a beautiful knife. The brass makes it stand out and your grips are superb in color matching the brass.

[@MakerHA]

Thank you so much Stan 👍👍👍

[@maguslascivious4980]

it looks rad! How did you decide on the thickness for the center piece of steel?

[@MakerHA]

So, as I didn't have a thin plate, I used a car spring, it has something around 6mm, the ideal would be a 3mm 👍👍👍

[@YummyFoodSecrets1]

👍👍👍👍

[@MakerHA]

👍👍👍

[@kermitderfrosch5432]

very nice but it think its way to thic to function as a kitchen knife

[@MakerHA]

Thanks my friend 👍👍👍

[@Wildgoatknives]

I’d love to try making a knife like this, great work! Do you remember how thick the brass sheet was? I can’t find much information on what thickness to use

[@MakerHA]

Thank you very much my friend. I don't remember, but I believe that 1mm would be enough. I think mine is 2mm or something close 👍👍👍

[@Wildgoatknives]

@@MakerHA thank you, I’ll try both and see how they turn out

[@MakerHA]

@@Wildgoatknives 👍👍👍

[@workshopredraven]

Изумительная работа! Нож получился очень красивым! Посмотрел за прцессом создания ножа с большим удовольствиеи.

[@MakerHA]

Большое спасибо, мой большой друг 👍👍👍

[@mikemolina949]

And where can I find you on Facebook? I’ve found you on instagram and messaged you . And man so I enjoy watching your videos. Beautiful blades

[@MakerHA]

Thank you my friend. Facebook is my Make HA page 👍👍👍

[@vladimirkovacevic1656]

thats awesome knife

[@MakerHA]

Thanks my friend 👍👍👍

[@gelanghaarteweile3048]

Very nice job! :) People ask me sometimes: "How does this hold the metal together?" well, never heard of brazing? :D If you put a slightly convex roll on the top your beltgrinder your belt won't wander to one side! :) Keep your content coming! I wish you 100k more subscribers! :)

[@MakerHA]

Thanks a lot my friend. Yes, I've been asked that too :D. My regulator is made of wood and it is a little convex as you said, but I believe that when I was making the support for it it was not very well aligned, which makes it go from one side to the other. Thank you so much my friend, God willing one day I reach more than 100k subscribers 👍👍👍

[@eduardomarinspereira2752]

Meus parabéns meu amigo! Como sempre fazendo um ótimo trabalho 👏

[@MakerHA]

Muito obrigado meu amigo, um grande abraço pra você 👍👍👍

[@HunterForHire]

Thorough tutorial and beautiful finished product. Thank you friend.

[@MakerHA]

I appreciate it my friend, thank you very much 👍👍👍

[@marcoantonii6917]

Olá meu amigo, que bela faca e você faz parecer fácil de fazer. Mais uma bela combinação de cor da lâmina e cabo. Muito bom👏👏👏👏 Marco Antonio, São Paulo, Brazil 🇧🇷🙏🙏🙏🇧🇷🙏

[@MakerHA]

Muito obrigado meu amigo Marco. Vou te falar que não é difícil fazer uma faca assim, basta só aquecer bem e ir martelando lentamente ate fundir, que da certo. Um grande abraço pra você 👍👍👍

[@chanal9456]

It's so beautiful, brother. I want to do it Hello brother from Thailand

[@MakerHA]

Thank you so much my friend. A big hug to you and to all Thailand 👍👍👍

[@haronazevedo6794]

A cada dia você se supera mais e mais irmão! Sucesso sempre, mais um lindo trabalho!!!💥💥💥👏👏👏💯

[@MakerHA]

Muito obrigado meu irmão 👍👍👍

[@kauaduque806]

@@MakerHA qual aço foi usado?

[@MakerHA]

@@kauaduque806 Na camada interna usei aço mola 5160, e nas camadas externas usei aço doce 1020 e o dourado o latão 👍👍👍

[@Bylly-e2w]

Different work, congratulations friend it was excellent.

[@MakerHA]

Thank you so much my friend 👍👍👍

[@KING-NOMAD]

Hi very cool job but please tell me there will be a video on the M4X PUNISHER knife I really want to see such a knife in your performance

[@MakerHA]

Thank you very much. Yes you can let me try to make one yes. Take a look at the video of a knifesmith friend too, he made one these days. His channel name is Leandro Goretta, he made the M4X and it was amazing, check it out 👍👍👍

[@KING-NOMAD]

@@MakerHA Thank you for your answer, I am very much looking forward to making such a knife from you, Leonardo signed from the first videos about you, unfortunately, I learned recently, but I think I will also sign soon waiting for you to make it's just very interesting who uses what manufacturing techniques

[@MakerHA]

@@KING-NOMAD Yes yes, sometimes a different technique makes all the difference. You can let me make one as soon as possible

[@brendenwilliams1990]

I'd love to own that beautiful blade...Really nice 💯%

[@MakerHA]

Thank you so much my friend 👍👍👍

[@diymthuanrauvt]

Tuyệt vời khi xem những video diy của anh

[@MakerHA]

Cám ơn bạn tôi 👍👍👍

[@NaoreW]

[@MakerHA]

👍👍👍

[@chakireladraoui9331]

Good

[@MakerHA]

Thanks 👍👍👍

[@ryanblystone5153]

Thank you

[@MakerHA]

👍👍👍

[@Sofinkik]

Great job bro!!!

[@MakerHA]

Thanks my friend 👍👍👍

[@kaijudt8358]

🎉

[@MakerHA]

👍👍👍