KnifeCenter FAQ #22: Best Steel for Survival? + More Altoids Tin Knives, Historic Knives, More!

[@legendinmysparetime985]

Properly heat treated 1095 has been fantastic for me 👍

[@dieseldabz7104]

Ya exactly bud there's nothing wrong with it and I'm the type that actually uses my knives and at times very hard. People also complain about 154CM but I used 2 knives while deployed made of them and they saved my life, literally.(Benchmade)

[@CadillacDriver]

@@dieseldabz7104 of course you did. Another Internet "serviceman" 🤣

[@ChrisWolf75]

Castle Bravo there are allot of vets that watch these videos and blow money on knives. Not everyone you encounter online is a keyboard call of duty champion some people have actually seen the real thing. You have no clue if this guys for real or not.

[@matthewadler1329]

It's so good. I'll be tempted by practically any compact EDC fixed or folder in 1095 if the price is right. I just know I dont have to worry about it.

[@matthewadler1329]

@@dieseldabz7104 I'd like to have a word with anyone complaining about 154CM.

[@Goose_Gear]

The history lesson was fun! Hopefully you can bring more historical knifes into the DCA videos. And can you present an example of how one knife design progressed over time? Maybe SAK or an American fixed blade. Keep it up!

[@hrvojeberden1308]

Absolutelly love the Viking Seax designs!

[@00corin00]

My favorite outdoor knive of all time is the Benchmade Nestucca. Discontinued, but you can find them on Ebay.

[@dieseldabz7104]

Hmmm I'm a Benchmade fan and collector and I don't own one of those... I'll have to check into them, thanks bud..

[@00corin00]

@@dieseldabz7104 I am a benchmade owner and collector as well. Honestly my favorite knife. It has a great steel and can be used for so many things. Hunting, skinning, kitchen and it looks like nothing else on the market. Nothing else! The collectability factor is also another reason I love it! I hope you get one!

[@CadillacDriver]

Just looked them up, what a piece of shit looking, awkward-ass design 🤣

[@93DracoX]

@@CadillacDriver its an Ulu style design. Seemed to work great for the Inuit and other Northern Tribes for 1000s of years.

[@CadillacDriver]

@@93DracoX it may have worked, but that doesn't mean it's efficient or attractive....

[@markfcoble]

Cold steel folding bushman. Wrapped handle with denim strip and rubber bands. Heavy duty fun.

[@artemkanarchist]

Thanks a lot for answering my question! ❤️ And thank you kindly for the recommendations as well - this particular version of Spyderco Dragonfly Wharncliffe K390 seems to have hit just the right spot!

[@cesaravila739]

Hey David, I know you love the Tec-Locks, but can you show us how to attach sheath to standard Tec-lock for either horizontal or vertical carry on a belt? Love the FAQ’s, keep up the great work!

[@eggersm.r.5752]

80CvR2 is some pretty amazing steel for a fixed bush craft/survival blade.

[@MountainFisher]

Originally called 1080+, but it really isn't much different than O1 tool steel except it doesn't have tungsten. To get the two steels to give you their maximum possibilities you must heat treat them in a controlled heat oven. The high manganese percentage in O1 gives it the property that makes me use it the most is I get O1 with the 0.20% vanadium allows me to hold at austenizing temp of 1475 for 15 minutes to get carbides from the tungsten and chromium. Vanadium at that small amount doesn't make carbides, but restricts grain growth. The Manganese allows me to grind it to almost finished because if it warps when quenched you have two to three minutes to straighten it before it sets up. A vice and pliers are at most you'll need.

[@eugenevictortooms4174]

I've got a Winkler belt knife in 80CvR2 & it cuts like a demon. Great steel but it's very sensitive to rust.

[@eggersm.r.5752]

@@eugenevictortooms4174 True, sadly most high carbon steels are.

[@reasonablenamehere]

@@MountainFisher You really can't go wrong with either one of those. Very forgiving steels in every aspect but corrosion. I HT both with a propane torch and a bucket of peanut oil and can get good enough results. 1084 is also another good one.

[@MountainFisher]

@@eugenevictortooms4174 Try bluing it using Birchwood Casey Super Blue to resist rust. There is a trick to applying cold blues and to keep it going on nice and even. Use either OOO or OOOO steel wool or fine Scotch Brite to apply the blue. Clean the knife with lacquer thinner/acetone/MEK or denatured alcohol. Do not use regular paint thinner as it is actually a little oily because it is distilled diesel, hence the "Distilled Spirits" name on the label. Great for starting charcoal in your BBQ by the way. If you have put a mirror finish on your knife use OOOO steel wool or very fine Scotch Brite. When the blue has dried buff with clean steel wool or brush with a brass toothbrush sized brush. Do not brush with a steel or stainless brush because they scratch the surface of the blue.

[@jumping438]

Quickly moved to my favorite knife channel on YT.

[@anthonycampos7417]

For the poet fishermen guy I HIGHLY endorse the Yojimbo 2 or Yojumbo and the Benchmade pocket strop. I worked 3 years in the grocery store freezer department unboxing all the pallets we received. I had to break down all the cardboard we ever received to fit it into the Baylor compressor and let me tell you. My Yojimbo 2 worked like a champ and never failed me. That thing is a Xacto knife on steroids. The only thing is you need to be mindful of how fragile the tip is. If you drop it on concrete tip down it WILL chip. The strop is necessary to maintain the edge and only takes about 10 minutes max.

[@mattg2935]

Great series, I'm glad you have keot it going. 22 episodes and going strong.

[@wesbailey3456]

Hey David, Always enjoy the FAQ series. Appreciate your Professionalism, Positivity, and Plain talk (no profanity). I am curious which of the two knives you would personally select: the Ka-Bar Becker BK62 or the ESEE PR4 Fixed Blade for Bushcraft? (and WHY?:)) Thank You Sir

[@knifecenter]

I like the Becker. More comfortable handles for me :) -DCA

[@wesbailey3456]

Thank You. That is what I will do.

[@wesbailey3456]

@@knifecenter Just ordered it. Thanks

[@reaganm.8818]

Great video as always David C. Anderson! I was wondering if there are any modern traditional slipjoints, under $100, that have either carbon fiber or micarta? Thanks in advance!

[@brianmiller6055]

Properly heat treated 1095 steel is the perfect example of if it isn't broke, don't fix it.

[@ChrisWolf75]

I love me some 1095 steel like Tops uses.

[@brianmiller6055]

@@ChrisWolf75 love Tops differential heat treat. Esee also does a great heat treat on 1095

[@03_austindrake88]

Another great episode of FAQ this week. DCA always does such a great job with the Knife Center videos.

[@dennishayslip4605]

Thinking along the lines of that question relating to the Tuff Lite... I just received my Spyderco Smock from Knife Center and thought it would fit the bill as well.

[@reasonablenamehere]

I agree with you 100% on O1 and AEB-L. Those are my two favorites right now. CPM-M4 would be my third pick.

[@rockets4kids]

Thanks for putting chapter marks in these FAQs!

[@joshmorris5248]

David, I’m really loving this series, as even a longtime knife guys can learn new things too! I’ve seen you hint at EDC smaller fixed blades sheath options like the Ulticlip and Mummert clips. What other options would recommend, even for pocket carrying? Thanks very much for your time!

[@knifecenter]

Those are pretty much the gold standard right there -DCA

[@chriscoetzee6484]

I would like to add the Kizer Crocotool as a perfect small survival knife in a Altoids tin. It has S35VN steel construction and can opener,bottle opener and wrench cut outs in the handle.👍😎

[@joshuaritzheimer1382]

Oooo that Pilgrim looks nice! Hope you are able to get more out because I need one!

[@gcvrsa]

IMO, the best steel for a survival knife is 420HC. It’s tough, it’s highly corrosion resistant, it’s cheap, and it sharpens easily. The number one most important feature of a knife is how sharp it is, and the last thing in the world you want in a life-critical situation is a dull knife made of a steel that really requires access to bench tools to properly sharpen. You want a steel that is field-expedient, that can be sharpened quickly and easily under adverse conditions with marginal sharpening materials. 420HC hits what I think is the perfect sweet spot. It may not have the edge retention of many of the latest crucible steels, but it’s a lot better than you have been led to believe.

[@charlessalmond7076]

Just picked up a Gerber Principle in 420hc. I've been truly impressed by the steel.

[@espo8opse]

Hey there DCA, I have a question: Once upon a time I purchased my first knife, a very affordable Gerber Mini Remix framelock, which I sadly lost after several years of daily use. That original Mini Remix, with its smaller sheepfoot style blade and minimal handle, has since been discontinued. There are some newer versions of the remix available but their handle styles, blade shapes, or combo edges just don't really do it for me. I loved that sort of minimal styling, no nonsense edge, classic blade shape, and especially that open pivot. My question for you is; do you know of any folders out there today with any similar design characteristics of my first beloved Gerber Mini Remix? Thanks P.S. I Hope I get featured but if not just know you're the Man DCA! Keep up the awesome work

[@sweetdrahthaar7951]

I don’t have any sharp questions and I won’t pester you with any dull questions. Thanks DCA👍🏻

[@carminuccio05]

Last week you did a chef knife set on a budget. If you had to suggest a cooking knife set on the high end what would you suggest? Maybe 3-5 knives that could tackle all your needs but at the premium price point. Want to start a journey into a “forever” cooking knife set and can tackle piece by piece. Thanks!

[@judepettit9550]

Hey David, my future father in law is a working man that works in a very dusty shop. He uses a Kershaw launch 4 as his EDC. I'm looking for a new knife for him in the future. Something that is great for breaking down boxes fast, but easy enough for maintenance. Maybe washers? Also the launch 4 is not a recommendation or inspiration. lol

[@tidge879]

Last week I criticised you for saying "addicting". Where I'm from in the UK (Leeds, Yorkshire) "right nice" is totally acceptable. 😉

[@dieseldabz7104]

Y'all talk funny over the pond huh??😜

[@mattg2935]

For the hollow ground wharncliffe, the Yojimbo is a good option. I have also been looking at the Spyderco Canis. It has a bit of a skinnier profile and a short hollow grind but a longer blade. However, it is $50 more than the Yojimbo which doesn't make much sense to me.

[@drewpfeif5028]

DCA I'm with you on the CPM3V. You need to start pushing for more companies to use it in folders. Benchmade straight up missed the dunk when they botched the heat treatment on theirs.

[@czed7515]

Id have to say out of all the knives I've had cpm cruwear is the easiest to sharpen. I can sharpen it even on regular sandstone quite easily. Plus it strops like a dream also.

[@minimountainco]

I’m with you on steel except 1095. Low price, far superior performance in both toughness and hardness and simpler heat treat make 8670M the clear choice. 👍

[@tomhorn7117]

Like your videos David. Could you go over the purpose of knives like the Tops Knives, Tom Brown Tracker, and Skullcrusher X-treme? Not sure what all the blade angles, etc., are for? Must of missed that day of school. I really didn't know the finer points of a Kukri, until watching the 1st season of Alone. Maybe you could cover that, too, if you feel it is related?

[@JR_BOTL]

DCA I know you like specific questions so I will fire one at you. Looking for a recommendation for a fixed blade EDC carry, 2 to 3 inch blade preferably with a high end steel, thin profile, micarta handles and a sheath that will allow scout carry or double as a pocket slip. I like either a wharncliffe, sheepsfoot or tanto blade shape. Made in the USA is a plus. What would you suggest that would fit the bill?

[@excat]

I'll second this question, but for me would be slightly more specific - all the same except sheepsfoot / modified sheepsfoot only and USA/Japan/Taiwan made only. I'm a little more open on handle material except no rubbers or plastics.

[@minimountainco]

M1 from Lionsteel

[@chrisreuther4546]

Great video as usual.... I have a challenge- I am looking for an edcable fixed blade, made in the USA under $150 with either a low ride sheath or even preferably a scout carry that I can draw right handed.

[@kitchensmith4616]

Hi David - thanks for the great videos! A question from a chef in the U.K. .... blade centering. Does it matter to you and what do you do to fix it if it’s off? Keep up the great work!

[@mathewlinder4764]

Had some great experiences using AEB-L and A2.

[@adamwilson6037]

You can also look at the yojumbo. Same as yojimbo. Just bigger.

[@If-ish]

Hey David, great series. I'm looking for a titanium framed lockback with a deep carry pocket clip and decent steel.

[@SantiagoMenendez]

Hey David! Thanks for another great FAQ. I really like your canteen knife. Could you elaborate a little more on your inspirations and how it came to be? Thanks again and stay sharp.

[@knifecenter]

Check the beginning of this vid out: kzbin.info/www/bejne/j2HRp6prpJqKmpI Thanks for your kind words! -DCA

[@SantiagoMenendez]

@@knifecenter Thanks!

[@menace965]

If there isn't one already, maybe do a video on all the different steel types and what all the letters and numbers mean.

[@smithbilly1985]

I would like to see some button lock knives. Flippers, thumb stud, whatever you got. Im really wanting one and can't decide which one.

[@michaelbush7696]

Love these videos! Keep up the great work DCA!

[@Hershies25]

Hello David, was just wondering if there were some similar knives to the Ontario Rat 1. I’ve had it in my pocket for awhile and was looking for something similar and maybe with a different blade steel, thanks for what you do-shamy

[@charlescollier7217]

Excellent, as always, Mr. Andersen!

[@ShoutenKen23]

Hey everybody at Knife Center! Been loving the series, had a curiosity about knife design: Why don't more companies mill out the inner side of the handle for the lock bar relief in a frame lock? Just curious and I would love any recommendations you might have for some designs with that in mind that don't break the bank. Thanks for all you guys do!

[@go49ers11]

Hi DCA. I live in California, and like you I love fixed blades. In Cali fix blade must be in open carry. What would you recommend that it's not very noticeable to carry. Thanks and I love your videos

[@ricas1143]

Hi David, thank you, and the KC team, for all the awesome work you put into these videos. Can you re shape/grind FFG fixed knives to an convex edge without a major workshop?

[@T.Sizzle]

Hey DCA. Can you make a recommendation for a lightweight EDC folder that’s 2.5 ounces or less with an approximately 3” to 3.5” long blade? My preference is for a tougher locking system other than a liner lock. Mid to mid high range like S30v or similar at highest preferred. I don’t need the M390 of a super steel. A drop point profile with a flat grind is preferred. Basically, I’m asking about Bugout alternatives. Perhaps something less expensive. Thank you!

[@Alexander210]

Hey David, love the videos. I have one for you. I'm looking for a small fixed blade knife that I can stick in my waist tool bag that I carry for work. I currently use my pocket knife but I feel like it takes too long for me to pull it out and put it back in my pocket . Also, I don't want to 'scare ' my customers. I was looking at something like the Coldsteel Spike as far as size and dimensions, but it's a bit too aggressive in blade shape. Any other suggestions? Thanks in advance! Stay safe! 🍻

[@BecauseKnife]

The requests for hollow grind recommendations in this video got me thinking. What are the benefits of a hollow grind as opposed to a flat grind and vice versa. I'm thinking more of high or full flat grinds. In my experience both can be very efficient grinds for slicing and cutting. Generally speaking are there any particular benefits or draw backs to one grind vs the other. Love the show and the channel by the way. This is my favorite channel for knife content. PS: to the guy with 40 knives ..... try harder 😁.

[@christopher_martin]

for me, hands down the best survival steel is CPM 3V, some people say they want great edge retention but i say if you break your knife edge retention means nothing, in a survival situation you are likely to need your knife to do things it was not made for....strength is my concern and its all about 3V!....just my opinion!

[@knifecenter]

I'm with ya -DCA

[@Kilt_Camera_and_Carry]

Great Video ... and now my question: ... I like Hinder and Chris Reeve Knives because they allow and even encourage disassembly of their pocket knives without voiding the warranty ... Are there any other brands that are easier on the budget that also allow the user to maintain their tools without voiding the warranty?

[@TBEDC]

So I have about 100 knives and still I’m looking for my grail knife..it should be classic drop point, about 3 inch blade, 4 inch handle, liner lock folder..I’m pretty cool with any steel as I can sharpen so that’s not really an issue..flipper or thumb stud..even Lockback is cool..do you have any suggestions?

[@ninemimesleft]

tuff lite in an upgraded steel would be epic. K390 for the win

[@nomojo1110]

yeah I'm surprised it isn't available in AUS10, at least.

[@scoob42]

Hi, David! I’m a huge fan of the CRKT Minimalist line and the S. P. E. W. Any tips for pocket clips or other ways to carry them other than neck or vertical belt carry?

[@reasonablenamehere]

Check out Ulti Clip.

[@Squatch-sj3vg]

Hey David, what are your recommendations for a convenient scout carry fixed blade with a handle suitable for XL hands? For scale my hand covers the entire handle on a RAT 1, blade length is irrelevant to me (I like big or wide blades personally) I prefer USA made and carbon steel but I'd settle for the "right" import! Big thanks to you and the whole crew for making these videos!

[@knifecenter]

What kind of uses are you looking to tackle? -DCA

[@Squatch-sj3vg]

@@knifecenter I'm in the Navy so my knives see all kinds of use and abuse in my professional and personal life. I regularly need to cut: webbing, pallet straps, rubber hoses, fire hoses, thick cardboard, cordage of varying material and thickness up to 4", rubber gaskets, clear brush for shooting lanes etc basically everything short of food prep, and I don't ever pry with a knife. It's frequently the only tool I have on hand so I use it quite often

[@glenngoins3100]

I like the yojumbo. 4" blade.

[@lavenderpants8695]

My goodness that KUF sounds good! DCA how about showcasing some knives that you think have the best acoustics! With as many as you have handled you would know!

[@knifecenter]

Oh man, that is not a ranking I have been keeping in my head. -DCA

[@mitchelloughman8382]

Hey David, Iv got something a bit different for you. I’m looking for a work knife with about a 2 - 2.75 inch blade and a full sized handle (I wear a small/medium sized glove) for reference i find my cjrb ria fits my hand about perfect with just a little bit of extra handle sticking out. I’d prefer a sheep’s foot blade but it’s not a necessity. My price point is below 150 bucks.

[@rivivalgiant9168]

I have a question in regards to extreme cold. I live here in Canada and where I live it hit -41. And my benchmade Osborne 940-2 froze closed I’m looking to switch back to a knife that isn’t an axis lock Do you have any thoughts for an edc folder for winter with extreme cold temps. Thanks ps luv the series

[@ethanparton1500]

Hi David. Love the videos. I’m in the uk and looking for recommendations on a slipjoint knife. I would like a finger choil on the knife and preferably a strong back spring/ detent. Better steel than 8cr aswell if you can. Thanks for the Videos

[@knifecenter]

I would go with a Spyderco UKPK or Urban Lightweight (kcoti.com/2YW6DbA / kcoti.com/34QCnlQ) or the detent joint Small Archaeo from ArtisanCutlery (kcoti.com/2WOPBuK). Non-locking but still can be flipped open, safety from close thanks to the flipper tab, and a steel pin which can be inserted to fix the blade in place. -DCA

[@timfrost3781]

I would like to see you compare some large survival knives. Cost NOT the primary concern

[@ThatBoyMGee]

Maybe I will not make it to your next faq video, but I'll give it a try. Cool vids anyway. Here in Germany I'm looking for a small fixed blade that I can edc but one that I can also use as a back up knife for hiking trips. I would appreciate one made of premium steel. I like the Bradford g necker but I'm affraid the handle will be a bit too short. Any suggestions? Peace from Germany.

[@cole___train5200]

Hey David, looking for an American made thumb stud only deployment knife or thumb disk with a 3-3.5 inch blade. Preferably liner Lock or frame lock. 150$ to 250$ range. Thanks love the series

[@grominwithrob1339]

20 fixed blades and 20 folders. I forget about more knives than that. I’ll be looking for something and find a tucked away shoe box or ammo can full of blades. It’s awesome, it’s like Christmas!😂🤣😂🤣.

[@MrSir117]

DCA your nordsmith designs are beautiful. Please bring the price down so I can buy them all.

[@lummindnable]

What are some 4 inch plus folders that are like the cold steel sr1 lite? Also what do you know about cold steel being sold? And what does that mean for their knives?

[@odgreen1225]

Hey David.dude you're Really good at your job 👍 thanks for all the great info

[@knifecenter]

Thanks! -DCA

[@jkurtzz]

Thanks DCA 👊🏽

[@jessesioux4431]

Please I would like to see the mora fish knife 6.5 inch. Thanks

[@crcaez]

Hey Dave, a good “Knifes in the movies” collection will be awesome. But other than Rambo please!🤣🤣

[@ventsolaire]

Is there an EDC survival neck knife delicate as bird and trout, yet, tough enough to baton, other than ESEE CR 2.5 with after market kydex sheath?

[@Surago]

David! I bought the zwilling 19 piece block set. Honest opinion, is it any good?

[@sylvano1955]

Hi! I like very much your videos and KnifeCenter also but, you don't send folding knifes to Canada. I used to buy at WMK. I hope you change your policy. Thank you.

[@darenmcgovern4285]

What are your thoughts on the differences between the new ceo flipper vs. the lck+ or lck + large?

[@myalternatemeswordofthefor4928]

With zac gone from blade hq, this show is now #1 for knives for me.

[@maxthemaker9845]

DCA I'm looking for a flipper frame lock with 3" to 4" cutting edeg with no thumb hole or thumb stud and between $50 to $150, I would love to hear you recommendations.

[@akapabs108]

Kizer Laconico Gemini Flipper.. Ti frame lock is 170.. liner locks under 100.. damn good knife I have three of them.

[@knifecenter]

Gemini is a good one, thanks Pablo! Cheers guys -DCA

[@ronfry5851]

Hug also makes a mini fixed blade that would probably outside of the sheath fit in that tin but it's a hawk bill knife they make a they make a hawk Bill and they also make a clip point

[@andrespadilla5274]

If you could only have one fixed blade and one folder. Which ones would you choose?

[@brocksamson4250]

Dave, I'm looking at picking up a smaller Hoback blade but can't decide between the Enoch, Sliver or the Radford. What would be your top pick and why.

[@knifecenter]

Enoch for me for the blade shape, then the Radford for the handle feel -DCA

[@callendavidson4948]

I got two questions that are somewhat related. What folders have the best action in your opinion? And which ones do you like to fidget with? (Both while still being function 😉)

[@knifecenter]

Any Hogue with the ABLE Lock and Pro-Tech's button lock Malibu -DCA

[@xbtusd7501]

Hi David great advice , any ideas on what is the best Knife to fight a grizzly with , got a big boy hanging around the house truck , many thanks

[@knifecenter]

For legal reasons, I can not recommend anyone fight a grizzly! -DCA

[@xbtusd7501]

@@knifecenter where is your sense of adventure Dave ,

[@anthonymuscarella6308]

David I was wondering if you could only carry one folding knife for the rest of your days what would you choose?

[@knifecenter]

It hasn't been released yet :) -DCA

[@J3RK115]

Hi David, do you have any tips or tricks to cleaning ceramic honing rods/sharpeners?

[@knifecenter]

Powdered Comet cleaner and a little elbow grease has worked for me -DCA

[@J3RK115]

@@knifecenter thank you so much!

[@jitoshisagara3374]

Hello sir ...please...do best fixed blade kukri in the markets ..and the blade elders will praise thee David...

[@michaellambethsr7176]

I spent a pretty penny on the Benchmade bushcrafter wasn't impressed with it to tell you the truth bought the Kmora carbon and I am so enthused to say that I should have bought three more verses Benchmade

[@dieseldabz7104]

I need to pick up a Bushcrafter myself, even if I don't use it just to add to my Benchmade collection. What about it didn't you like if you don't mind me asking?

[@nomojo1110]

HAHAHA "rookie numbers." Love it. Cheers folks!

[@davidvermont]

What is the best small button lock flipper?

[@alexanderoliva6031]

Hey david I really like the crkt fossil but want an uprgraded version has to be frame lock or sub frame lock has to have flipper and i want it to look like the fossil under 200 but preferably like 150 please

[@brandonshehan699]

We know whats up !!! For sure buddy.

[@NashVt90]

Whatever happened to the Spyderco Para 3 lightweight in Cpm-Spy27 that was released last year? It seems like after the first delivery that all the knife dealers have been out of stock. I have a pre-order for one from around June of 2020 and I am still waiting.

[@knifecenter]

I think Spyderco really underestimated the demand for that knife. We are still waiting on more batches. -DCA

[@NashVt90]

@@knifecenter Thanks for the reply, I will remain patient. I am also glad that even with COVID-19 knife makers and sellers are able to deliver almost as fast as before. Stay safe.

[@mortobeans]

Just all around feel good knife knowledge.

[@JensenAzotea]

Sooo I bought an ADV Harpoon fixed blade in N690, Andre says it’s not as tough as the D2 version but more stainless...so what is the toughness comparable to? And is it tough enough to baton with?

[@tutzdesYT]

N690 is close to VG10 or 154CM. It is tough enough to baton with but I wouldn't recommend doing this stuff with folders. It is very harsh on mechanical parts.

[@JensenAzotea]

@@tutzdesYTsorry fixed my comment, it the fixed blade harpoon. But that’s interesting I always thought 154cm was toughter than D2, so much to learn when it comes to steel

[@tutzdesYT]

​@@JensenAzotea D2 is in a very weird place. If you say something like 20CV or N690, the manufacturer is implied. With D2 it is not. So D2 varies greatly in terms of corrosion resistance, toughness etc than anything on a market really. I actually own D2 knife with tougher blade than Benchmade's 154CM and a couple with much worse both toughness and edge retention. US-made steels tend to be more consistent.

[@JensenAzotea]

@@tutzdesYT wow yeah I know head treat and quality of steel do play HUGE parts...but that also makes it harder to understand haha

[@oris2252]

hello, my local law is very strict, looking for a two hand opening, non locking, folding knife shorter than 4 inches (10cm is the limit). for public use please no cliffpoint or any aggressive looking blade shapes. preferably less the 100 USD. great show.

[@joshuakoller2518]

Look up peasent knife see if that will work

[@oris2252]

@@joshuakoller2518 so i tried the svord, the piece of metal bumping out is not very nice on my pocket, not very pocket friendly if i were to carry in a bag would have been a great idea, thanks for the suggestion.

[@_MiMo_]

@@oris2252 What about just a 93mm Victorinox Solo?

[@oris2252]

@@_MiMo_ used to carry one, the blade material is not good enough for a daily use.

[@_MiMo_]

@@oris2252 you mean a under 4" blade right,? Not folded length?

[@janjimpson240]

I'm looking for a good wharncliffe knife and I've come to the hogue deka or spyderco yojimbo but I don't have experience with either so what do you recommend? I'm partial to the look of the deka but would like someone who has handled both to give me another opinion. Thanks!

[@knifecenter]

I'm addicted to crossbar locks so the Deka is the leader for me. Yojimbo has a little more handle real estate though, so it depends on what kind of grip you are looking for. -DCA

[@janjimpson240]

@@knifecenter thank you!

[@VIKINGKING95]

Hi David what's the best carbon fiber handle knife for EDC thats around $200 to $250

[@tipandachris7814]

For FAQ #23: David please help me find a button lock under 3.5" besides the hogue micro switch (have it) and malibu (too hard to get). Preferably under 200 if you can. Thanks always brother.

[@timjohnson690]

I use and abuse my high end knives. My Rockstead is scratched to hell. My Anthem is worn out well. My Sabenza is no safe queen. However, the BK 62 is definitely a real work horser.

[@barrystarr22]

1095 is awesome for sharpening it gets razor sharp in just minutes and is Tough! All my 1095 knives are sharper than razor sharp.

[@steeltrident]

Great series!

[@riteshtandon8701]

Amazing stuff 🥰