Knit Picks Yarn Swift Demo

An essential tool for any knitter or crocheter, the Yarn Swift holds your hanks or skeins of yarn in place as you wind them into balls. Shop Yarn Swifts here: www.knitpicks.com/search?q=Ya...
Simply clamp the swift onto a table or counter top to start winding yarn neatly and easily. Starting with the umbrella in the down position, place the open loop of the hank over the swift and pull it lightly so the far side of the hank is against the center of the umbrella. Then, use your free hand to slide up the umbrella clamp and open the umbrella to snuggly fit the circumference of the hank. Finally, secure the umbrella clamp in place and then wind away!
For added durability, the swift features metal hardware. The metal screws feature a plastic stopper at the end to prevent scratches when clamping the swift onto a table. For best results, use in tandem with the Knit Picks ball winder. Measures approx. 26" (66cm) in diameter (68"/173cm circumference) and 26" (66cm) tall when open

[@knitpicksOfficial]

Thank you for watching our video. Be sure to subscribe and turn on notifications. Happy knitting everyone!

[@simmaria2603]

Starts at 4:40 you're welcome

[@jaclynnteeter3067]

Maria Parker lol, thanks!

[@Avacarho]

I’ve never heard of a yarn swift until today. Thank you for a great tutorial.

[@ChynnaBlue1]

I bought the swift in Onyx and absolutely love it. It is so much smoother and faster than the swift I'm replacing, which cost about $20 less. I used a cotton round between the bottom screw and my quartz countertop for some extra protection. Well worth the money!

[@knitpicksOfficial]

So glad you love it!

[@myphotoworldjeankd4001]

Thank you for the simple instructions and demo. This is very timely for me. I just purchased mine and am waiting for it to come in the mail.

[@felpuda2910]

I am IN LOVE with muy swift and my ball winder!! Super easy to install and to use.

[@like90]

Very helpful demo. I just got a yarnswift and I can't wait to use it.

[@JacqueDooley]

I desperately needed this demo. I have never gotten my yarn winder to work. Yarn always pools and winds around the bottom and underside of the winder where the cog is. It’s a mess and nightmare. I never knew the winder should face the little metal holder that hold yarn from the yarn swift. I’ll try again. I wasted 100 grams of sock yarn, I was not a happy knitter. Knit Picks saves me again. Many thanks.

[@DOSBoxMom]

I just won a KnitPicks yarn swift someone was "destashing" on eBay. (She had received it new as a gift a couple of years ago, but never used it.) From the pictures, it appears to be the newer version with the metal screws. It should arrive early next week. Looking forward to using this with my KnitPicks winder to cake up some of my nicer yarns!

[@3randomcoolkidz]

I'd love to have all that yarn

[@marynolan5168]

Thanks for the helpful demo!

[@mariakristinahawl1640]

love my stanwood. made so much better, and doesn't snag my fine fibers. I gave the cheap knit picks one away to a beginner. my review, in a nutshell : "you get what you pay for".

[@oldermusiclover]

having been reading a set of mysteries that are set around some knitters. wondered what a Swift was, now I know

[@blueraspberrylemonade32]

What are you reading?

[@jennifursun3303]

@@blueraspberrylemonade32 it is a set of books by a author named Maggie Sefton

[@GreenRiverCottage]

I absolutely love this swift, I've had it about a year now. Great price, sturdy hardware. I've had no issues with splinters. Smooth turns, plus it's beautiful ... I leave mine setup. I have a different yarn winder, so I can't comment on the winder in this video. BTW, KnitPicks has great customer service. I'm thinking they would be willing to issue a replacement for a defective swift.

[@eminecelebi484]

Yukardaki ip sarma kac lira

[@DOSBoxMom]

I bought a cheap umbrella swift from eBay, and it was missing some of the string ties which should have been holding the bits of the frame together. I went back to an Amish-style swift (because that's what I was already used to), but I'm still tempted by the umbrella-style ones. Maybe a better-quality brand next time?

[@LR-zf8tz]

I've used my swift and ball winder and the last two cakes I've wound have become horribly tangled inside the cake and when I took it off and began knitting, had a horrible mess and had to cut the yarn and wind by hand after the fact, after detangling a horrible mess. Any ideas on what could have gone wrong? Too tight of tension while winding? anything else?

[@suzannajames3084]

Can you make a skein from a cone using these?

[@susanboak341]

I have this swift. There is a wire “spring” in the top spindle that goes into a channel that holds it all together. I had something fall on top of mine which forced the wire out and bent it. Does anyone know where I might find a replacement wire spring?

[@carolvile5584]

I just got my swift out for the first time, bought it a few month ago. I have pout the short screw into the top part, tried to unscrew it to loosen and move the wood stopper and the fancy end of the screw has come unscrewed instead of the screw! What do I do now?

[@Hozavuma]

throw it away

[@SusanPitman]

Just curious... why is yarn sold in hanks? Why not sell it in center pulled cakes like is being made here? I always wondered about that... thanks for the demo!

[@jeanfelix6909]

At the top of the swift, the wire holding up the umbrella has slipped & I cannot get in place. What do I do?

[@leeanncohen711]

Do you secure the other end of the yarn? Or does that make it more likely to tangle?

[@AndiAndrea]

You didn’t explain how to thread the ball winder.

[@knitpicksOfficial]

We have a video on how the Ball Winder works kzbin.info/www/bejne/r4bapGx-irF2e7c

[@HiKimiko]

This is not a review... A review someone says what they like and don't like about a product not just how to use something....

[@olivedenton2187]

Turning 3 ply wool into boule knitting wool

[@latonyawinkley9913]

It doesnt say review

[@Bgsqlila]

No one said it was, it's a demo.

[@fionaleonard7246]

BlueGreen84 it says Product Review on the second frame of the review

[@soschadao]

its cheap crap, i went out and bought a better winder and swift because it leaves splinters in my yarn