This Blacksmith Made A Huge KATANA out of The Most Ordinary Nails! It's incredible!

[@LeeCarlson]

I am always amazed at the blade-smiths who call a sword a katana when it is barely the length of a combat wakizashi.

[@ДенисНовоженин-д1т]

Мне одному показалось что углерода в изделии нет? Можно было бы чуток добывить.

[@robertjones6628]

As a knife maker, this guy makes a top notch scrap metal producer.

[@velezkolohort1702]

В гвоздях совсем нет углерода!

[@johnpociecha1177]

i just love the way hes so frugal with the flux

[@masterQ20]

*Excellent man, thank you for sharing your work, God bless you*

[@AdrianA-nf4xo]

Is not a katana. Is very short

[@rome79735]

No , that would be a wakizashi

[@terrycote4036]

He needs to change the name of the video cuz that’s definitely too short to be a katana

[@Olexandr_UA_]

Гвозди несомненно лучший материал для изготовления клинка.

[@pawelis5179]

The Best 👍

[@FromTheHeartWoodMK]

As goes effort, this is an interesting video, the tang and guard could have used a lot more care in my opinion. My biggest concern is that nails are not a good quality steel and are not hardenable in general. When he was grinding the steel after welding it you can see that it only produces orange sparks without the blooming effect at the tip of the sparks, this is indicative of mild steel or low carbon steel. Doubtful that this blade will hold an edge for very long if at all.

[@EgoundderRest]

Ich denke, das kurze Schwert nennt man Wakizashi. Ein Katana ist viel länger. Trotzdem: Eine gute Arbeit! 👍🏻👋🏻

[@johnroberts3952]

There's no way in hell that will ever hold an edge.

[@Олежка-я4б]

Это не катана(((( Но видосу лайк)

[@chrissparrow6383]

Mate that was amazing to watch !!! What was that stuff you used to fix the handle ????

[@ClintsHobbiesDIY]

Bambo with 2-part epoxy putty.

[@fgmg3]

What is the material you spilled at 5:25?

[@GaisaSanktejo]

Hmm... while the vinegar would dissolve the zinc plating, I'm surprised he didn't use something a little stronger. I know people will comment about how wire nails are a mild steel, which is true enough, but there is a chance some of the carbon from the charcoal will infuse/case harden layers of the blade, which could increase its hardness with the forging process. The only way to know for sure would be to do a before and after test of the nails, then the blade to see if there's any difference in the mild steel compared to the tempered blade... ONE possible option for case hardening the blade, would be to set the forged blade in a box tube, then fill it with crushed charcoal, then apply sufficient heat, this should infuse additional carbon into the blade which, in turn could case harden it during the final tempering. I only have one real bone of contention with this tool... ... well, those who know me are well aware of my distain for rat tails tangs... 🤷‍♂ Either way, it looks cool and I LOVE the bamboo handle!!!

[@brysonalden5414]

I agree, the nails make a nice pattern, but one that could have been used in a san mai blade to clad 1084 or some other high carbon steel. I believe the minimum acceptable carbon number for a katana is 1045, and I doubt the nails had that much carbon, even if there was some carbon migration from the hardwood charcoal.

[@GaisaSanktejo]

@@brysonalden5414 You're spot on! It would definitely be interesting to see the hardness of that blade, but I would have preferred to see a high carbon core sandwiched in the middle of that... Love the way it looked though!

[@MASI_forging]

Great work as always 😍😍

[@antongeneralov8552]

Маринованные гвозди ... Ням-ням.

[@جمالزيادة-س7ر]

well done. My grandfather made a sword that cut a cucumber

[@HakanOzkan-fo4lr]

Let's not call it gigantic. I think we should call it chisa-katana.( short katana)

[@LukasDerBaum]

Not really, since a katana is just a Japanese sword.

[@christophedethier8580]

I thought it was a wakizashi.

[@vq35deALTIMA]

Dude roughed in his edge with a big ass grinding wheel 😂 what a stud. Mine would be a new "wavy edge" katana

[@bedroomairsoft5216]

I like the way he made an honest effort but the grip and tang are a war crime

[@SCREAM523]

what is that white powder you throw on the metal?

[@farzadhemati1]

Nice

[@cliffordkelly5327]

Howdy Master Seyran ! Your videos are very impressive to watch & that , looks like a Katana to me! I love how you slice your melons! Always great to watch you make Art-Weapons ! Keep on pounding & I’ll keep watching!

[@twocrowsknows2811]

I like how you smashed it on the anvil with that first swing 😂

[@ArtemBurning]

Не хочу обижать кузнеца, но это не катана, это кусок кривого лезвия с бамбуковой ручкой.

[@aps8446]

This thing is not a katana by far.

[@raymorphis5714]

my question is this : what Kind of nails? In knife making the type of raw steel used is Vastly important. If they were "normal" nails that means the blade is cannot be hardened and Thus useless for anything other then a wall hanger.

[@AliAli-zv5ot]

👍👍👍

[@master-user]

Японцы просмотрев это видео, сделали себе харакири

[@mountainholler290]

Nails as a rule are low carbon steel and as such are not going to harden properly !

[@orco1313]

Creo que esos clavos son acero dulce o la mayor parte de su contenido es acero blando, solo hay que ver cuando pasas la amoladora que las chispas precticamente no estallan en el aire, se ve virutas de acero caer a la mesa y quedar incandescentes. Eso un acero de alto carbono no lo hace

[@Sl20]

I admire your work ,but you for a moment lost me but you keep yourself busy and that is priceless!!!!!!🤫🔴🫢

[@РусскийПацан-п6п]

Мужик ты реально думаешь что из гвоздей можно сделать нормальный нож?

[@paulpozzi2087]

Il arrache..... mais ne coupe pas

[@AstronSayera]

It's mostly a machete inspired by Japanese wakizashi but definitely not a katana.

[@michaelhuss611]

Simple efficace.... Pas de chichi c'est du costaud

[@EnriqueOchoaMaldonado-uc8kl]

Quedo muy bien la Katana..!! Buen trabajo..!!

[@nicholascotter5662]

whats the powder

[@justinjordan7449]

Nice video but it's a wakizashi

[@mehmetsacak4804]

Paslanır bu güzel oduda

[@micahgoodman325]

Did Luke Perry fake his death and start forging swords?

[@josemanueldelacruz8711]

Wakizashi

[@Salahdin_216]

We never weld the tail of the knife, it must be one piece from the nose to the buttom

[@BelisariusCawl1047]

That is very much a thing. A katana? No… but it’s something alright

[@БабичСергій-т6м]

Друже ну яка катана може бути з ст 3 це що сувенір

[@DesiderioPablo]

Tenes q ser mas detallistas con el mango

[@СергейВоробьев-щ6у]

а вместо гвоздей допустим сверла. или биты не судьба было взять? в этом железе углерода ноль и этот нож можно в пакете, как сувенир носить, он даже холодным оружием не будет являться. так как согнется от тычка

[@АлексейСошников-в7т]

Мужик ты супер но мой совет собирай эти пластины перекованые и скуй не ножи а топоры из всех пластин

[@diego_kaleu]

a KATANA não é lixada com equipamento elétrico para ter a forma que tem. ela é martelada ate chegar lá.

[@ataahmedkhan]

Let me tell you all… It’s the minimum source and minimum equipment used to made this katana… so enjoy without putting your opinions…

[@blackhatentertainments]

Interesting but dull in the same time . and why using that press ???? as a blacksmith you should hammer it with your own hands , to control the steel . Too bad people this days just because they have some tools think they can make anything with them . A real katana maker and i wont call him a blacksmith , because katana makers are artists would laugh at your methods . I would accept this video for kindergarten education , but for something more serious like 101 "blacksmithing" i would not recommend . I'm not laughing at your efforts , good job doing from nails a machete , because that is not a katana . I encourage you to try and do better and better . tools you have . but put more effort and also soul and passion in to it .

[@gurulimbo]

The Damascus looks nice…. 😶

[@rafaellondono1882]

Maestro que es esa sustancia que le agrega para fundir el metal?? Gracias

[@fatihfarimaz2295]

Borax

[@slayr9732]

*Wakizashi

[@igorigorr8666]

ТАКОЙ ИСПОРТИЛ АРБУЗ......

[@jakubsimcik733]

length of wakizashi and one type of steel? this has nothing common with katana just shape

[@revenant215]

Не катана ,но мастер профи.

[@MrREMEKIN]

KATANA??

[@hmdelima]

Epox?!?!?

[@net5834]

👍🔥🔪

[@hermelramirezbayona458]

Me gustaría saber de qué grosor quedan.. gracias

[@joachimrist2293]

Ich bitte um Erklärung. Wie kommt das Muster zustande wenn man Nägel aus, wahrscheinlich, ein und denselben Material hat? Ein Damast zeichnet sich doch dadurch aus das man verschiedene Stähle verbindet. Wenn man aber, wie gesagt, Nägel aus einem Material nimmt, hat man doch auch nur einen Stahl aus einem Material. Ich verstehe es nicht 😢😢

[@ediniziosilva7551]

JESUS CRISTO te ama muito ❤

[@Максим-ч3м4и]

This is not a katana, this is a shameful toy for cosplay parties for adults, if there are 20 units of hardness in it, it's good. Ruined the nails😂😂😂😂😂😂

[@ЕвгенийГришин-д5м]

Я думаю, что пока уже сделать мощный мясной топор!

[@arne999]

gigantic? looks like my letter opener , its not a katana but a tanto or something similar, good craftmanship nontheless :)

[@MichaelPresherSR]

If you are only going to complain about the work then keep your thoughts to your self i like his videos better than most i have watched and dont have to worry about annoying talking

[@tomaszato5230]

Dělat katanu z hřebíků je naprosto zbytečný nesmysl. Hřebík je měkký a nízkouhlíkový.

[@AKZP87]

That is not Katana :D

[@the99floor]

釘体玉鋼出来んのかっฅ(๑⊙д⊙๑)ฅ!!した

[@neptarodriguez7635]

Al fabricar una karana lleva dos combinaciones un acero de alto grado de carbón y un acero blanco al mezclarse y doblarse forman un dobles q forja capa sobre capa da textura al material pero sin ánimo de ofender hay lo único q hay es una solo aleación hierro blando o dulce como se conoce la verdad esa no es una katana pues por ser un solo metal lo más seguro se oxidada y perderá rápido su filo

[@lom.]

Я лопатой так арбуз отрежу

[@the99floor]

(;´･ω･)ｳｰﾝ･･･新刀と呼んでいいのだろうか…🤔💭

[@8411Madmen]

Катана по армянски🤣

[@ヒキも]

焼き入れ温度低過ぎ… しかも温度にムラありすぎです

[@og_blackstar]

🤦 le tranchant est la pointe doivent être créé en martelant et non en utilisant une disqueuse vraiment pour faire sa fait rien travaille de baraki la 🤦

[@og_blackstar]

Pourquoi c'est créé en martelant la réponse est simple sa enlève pas la matière contrairement à la disqueuse

[@Elzebio]

Na boa, para de ver, escreve Katana mas faz Tanto... Nada haver Katana é mais longa, é tipo escrever Long Sword e fazer uma adaga... Vlw flw...😢

[@the99floor]

申し訳ないが、これは日本刀ではない(;´･ω･)ｳｰﾝ･･･

[@benloyd1970]

With all the good equipment (power hammers, grinding tables, welders, etc.) this guy has in his shop, why not make a nice knife out of good materials instead of junk made from nails? Seems to be a waste of time.

[@benloyd1970]

Watermelon slices is about all that knife is good for.

[@まろん-z1x]

良い職人さんだとは思うけど。これは刀じゃ無いな、長めのナイフだな。反りもないし、直刀だし、誰か刀鍛冶の人とコラボ企画して欲しい

[@marcusrodrigues516]

No gloves

[@EightennRuedas]

Enorme??? 😂😂😂😂

[@phukkya-fielings]

That’s not huge or a katana

[@nicholascotter5662]

whats the powder pls or i un subscribe

[@bradleysquires9584]

Not a katana it's more like a tonto

[@asusta2346]

Обыкновенный гвоздь это сталь 3, какой из него мечь , хоть взял бы бетонный гвоздь...😮😮😮🫤😕🥺😟🤨😯🫢

[@asusta2346]

Пустая трата труда, детская игрушка... 👎👎👎

[@ohforgodsake8486]

Dude, I really like your stuff, I really do. But I can't stand it when people make a "katana" already curved. It's not a katana unless the curve comes from the heat treatment! 🫣

[@АлексейСоловьев-ь6ь]

Какая то херня.... бутафория