Knox Honister Jacket | AAA rated motorcycle jacket from KNOX

Knox Honister Jacket | AAA rated motorcycle jacket from KNOX
This video is our presentation of the Knox Honister AAA rated motorcycle jacket. The Honister is the pinnacle of the Knox armoured shirt collection achieving the highest rated AAA approval, and is our most protective motorcycle jacket. Featuring brand new Knox developed fabrics for ultimate strength, abrasion resistance and breathability. The Honister is fitted with new discreet Micro-Lock Compact Level 2 armour on the shoulders and elbows and full Level 2 back protector.
View the Honister Jacket here :
Mens - www.planet-kno...
Womens - www.planet-kno...
The Honister Pass, situated in the UK Lake District, is one of those roads that needs to be ridden to be appreciated. Connecting Buttermere Valley with Borrowdale Valley, it winds its way to a height of over 1150 feet and is rightly regarded as a piece of motorcycling Nirvana.
Being the mountain pass that is closest to the Knox HQ, it was inspirational to the creation of the Knox Honister jacket. The Highest Performance and pinnacle of the Knox armoured shirt collection.
First invented by the brand in the 1990s, Knox armoured shirts are at the very heart of the Knox collection and the Honister Jacket is the new pinnacle. Wearing a close-fitting armoured shirt is the best way to protect a rider, since the armour is comfortably held in the right place when you need it.
Making the Honister jacket was a tough development journey. Since our goal was to develop the Honister to the highest Class AAA for riders seeking the best performance, it required entirely new and strong fabrics.
Achieving CE approval to Class AAA is no small achievement. AAA is the highest class for a motorcycle protective garment and is usually only attained by one- and two-piece leather suits.
The protection fitted is the all-new Knox Micro-Lock compact armour. This uses SMART technology to keep the armour super soft to touch but it locks when impacted, delivering fantastic protection. The locking action increases the amount of impact absorbed by the protector and reduces the energy passed through to the rider in the event of a crash. This Micro-Lock compact armour used in the Knox Honister Jacket is approved to Level 2 in the shoulders and elbows and features a full length Level 2 Back Protector. It can be complemented with an optional chest protector.
The Honister Jacket has been designed from the ground up. This includes everything, from the way it is tailored and cut to the way the fabrics perform. Construction has been carefully developed to be as comfortable in the harshest of environments as it would be on a gentle spin in the country. Extra attention to detail completes the style and the AAA approval is highlighted on the jacket.
Developing new mesh fabrics which deliver the ultimate strength and resilience has been achieved without sacrificing breathability. Blending this with the hardest wearing stretch polyamide, riders can be confident in the protective qualities of the Honister Jacket in all environments.
All the zips in the Honister jackets are by YKK. There are two zipped side pockets and one zipped large pocket on the back. Detailing continues with discreet Knox branding on the front hem as well as on the back. The new branded badge on the sleeve comes with a reflective surround, complemented by reflective strips which are only visible at night. Thumb loops are found on the cuffs for added security, while an improved security belt loop system is fitted on the inside so that riders can secure their trousers to the jacket. Even the collar has a soft interior for comfort around the neck.
The Honister is available in S - 5XL in mens XS-3xl in Womens. The Honister is part of the Knox Seasonless Collection. Knox Seasonless is about being able to use one outfit throughout the year and adapting it to overcome all conditions. Start with an armoured shirt like the Honister as core protection, then add another layer from the collection to adapt to changing conditions. Knox Seasonless is adaptable, more sustainable, and protective.
www.planet-knox.com

[@Peter-mcmcmc]

Have been riding with mine for about one month and it's phenomenal! Incredibly comfortable and the AAA protection, along with the Knox micro-lock armor, is reassuring. Thank you for making such wonderful gear!

[@jonomasonILoveU]

Hi Peter, what did it cost?.

[@TheValbunnys]

Where about you live ? Is it ok in warm or cold weather ?

[@Peter-mcmcmc]

@@jonomasonILoveU just shy of $400 (directly from Knox) and worth every penny

[@Peter-mcmcmc]

@@TheValbunnys Southeastern, coastal US. It gets hot as Hell here, so it’s great for ventilation and I wear it under my Helite Turtle vest. I’ve only had it for a month, and in the winter I plan to wear it under my leather jacket. What I love most about what Knox does is that the armor stays where it should. Nothing is fiddly and you feel extremely secure.

[@KnoxArmour]

Many thanks Peter, so glad you love it! Aaron KNOX

[@PMitchell106]

Would love to see this in a lighter, high-reflective, or hi-vis color scheme. Impressive protection, but I don't do all-black motorcycle gear for safety reasons.

[@SeraphimCramer]

Ok, why is this popping up in my recommended feed right after I got home from getting a new jacket at a physical store?

[@1969tonksy]

Still rocking my 'Urbane Pro' MK2 but this is looking like a nice piece of kit should I upgrade.. Just bought a pair of the Spencer jeans but am yet to try them out.. Great products as usual

[@brianglendenning1632]

I have one of your competitors AAA shirt, which like a light denim jacket. It is epic, and will be looking at your product (which seems even lighter and less bulky than what I have). Only wear my leather gear on the track, where it is mandated and wish track operators would wise up so AAA rated non-leather gear is permitted, as my *stars track suit is probably less safe than the AAA gear I have

[@petpevs6707]

Would you happen to know measurements and size of the male model? Just trying to find which size is best for me, I'm somewhere between a medium and large, 6ft tall 41inch chest 20inch torso length if any of that helps. Thank you for your time, amazing product, cheers!

[@David_Day]

Love your approach to product design and branding. You stand tall in the market cluttered with fluffs!

[@KnoxArmour]

Many thanks David! Trying to do our own thing with our own ideas! Aaron KNOX

[@leantucktwist]

Looks awesome, what a fantastic product.

[@yamahapilot]

I just ordered the Honister and am really looking forward to trying it out. I'm 5'9", 41" chest, and about 175 pounds and ordered the large. Hopefully, it fits.

[@KnoxArmour]

Thanks Bronson, hope you like it! Aaron KNOX

[@Meianju]

looks amazing, great presentation as always. I guess this comes to replaces the Zephyr Pro?

[@KnoxArmour]

Many thanks! And yes, this is our new replacement for the Zephyr Pro. Thanks, Aaron KNOX

[@braaaaaaaaaaap]

No key pocket on the left arm is an oversight. I'd buy one if it had one.

[@zurielanderson6190]

Can you fit an airbag vest under this?

[@martinfoster5163]

As a Knox customer, I think it looks like a solid jacket. I own the lowly action shirt with upgraded level 2 armour. I wear it under leathers. One correction though, AAA is not the highest rating. EN 13595 is still active until September this year. Then it will be replaced by BSI 13595. 13595 level 1 is significantly more stringent than EN 17092 AAA and level 2 is almost twice is stringent. Textiles, jeans and of course leathers are available that are certified to EN 13595 level 2. I own several of each. Companies that emphasize safety still get their kit certified to level 2. And some even do both EN 17092 AAA and EN 13595 level 1 or 2. Putting performance grade cowhide in the same category as any textile kit is very misleading.

[@KnoxArmour]

Hi Martin, thanks for the comment and continued support! Re the comments on CE performance, AAA is the highest rating of EN17092, which is the correct, mandatory and most developed standard for motorcycle PPE. You are right that the old EN13595 professional standard will lapse this year. Whether or not this would be replaced by a new BS standard is pure speculation at this point. AAA was designed for 1 or 2 piece leathers, so it is not misleading in any way to say that textile products approved to AAA are in the same category as the category that was designed for leathers. Thanks, Aaron KNOX

[@martinfoster5163]

@@KnoxArmour Thanks for the reply. I could write an essay on all the problems specifically with the Darmstadt abrasion test (AART, developed in the 80's). It was developed way before the industry standard Cambridge machine. Unlike the Cambridge machine it was never peer reviewed as being suitable. Sure, the Cambridge test isn't perfect. I'd add a significant impact to make it more relevant. The Darmstadt machine has even less "impact". Call it just an abrasion test. There's no impact from 10mm. Suffice it to say that the biggest problem with EN17092 is that you don't get much information, except it passed or failed. This is just about useless for R&D and not very informative for customers. MOTOCAP is the only source I trust because they test to failure - or 10 seconds, whichever comes first - and publish unbiased independent results. Unfortunately, they've never tested any Knox kit. However, the picture is clear that even the AAA rated nylon textiles are failing at about 2 seconds. Some get 4 seconds with multiple layers. Whereas leathers in single layers achieve about 4-7 seconds and double layers max out at 10 seconds and the test stops. In studies where they tested to failure, double cowhide was getting 12-25 seconds. If I were to offer a constructive suggestion, I'd make a vastly improved Honister Pro with low-friction caps on the shoulders and elbows, similar in concept to Knox SPS sliders. This won't be tested by CE but in the real world it would potentially give the Honister repeat crash performance in any significant impact and subsequent slide.

[@KnoxArmour]

@@martinfoster5163 Thanks for reply. Clearly you know best Martin... we've only been doing this for 40+ years and working on standards committees for over 28, so of course know nothing about the matter :)... All the best, Aaron KNOX

[@The-Splat]

@@KnoxArmour Like Martin, I’m a Knox customer who likes elbow and shoulder sliders. They add significant abrasion resistance (which matters for even AAA textiles) and - when well-designed - can look stylish. And while we all know that decent leathers trump textiles (let’s not pretend otherwise), kudos to Knox for developing AAA rated textile kit. Often, it’s too wet or too hot for leathers. With the Honister, Knox has shown up more than a few competitors that have yet to launch AAA-certified textiles. It’s good to see a British company at the leading edge - showing that a AAA textile jacket is possible without costing over a grand like Klim, Hideout, etc.

[@paololanzoni6639]

@@KnoxArmour you seem a little too arrogant on your answer, yuo have to remember that we never never stop learning and improving . that said I like your product Aaron but not your answer.

[@markreynolds8630]

Nice. I want one. But do wish there where some lighter color options for riding in hot climates. A light grey, good for a Honister pass in the Pyrenees?

[@KnoxArmour]

Many thanks! Please bear in mind that the Honister jacket relies on massive amounts of ventilation to keep it cool. Ventilation on a motorcycle is significantly more effective than the idea of fabric colour solar absorptance. Hope that makes sense. Thanks, Aaron KNOX

[@ontheroadadventure]

A interesting concept. Im surprised we have not seen or heard of anyone wearing this gear down in the southwest. I see this is designed to be a tight fit, how does it look and feel for real men with a belly?! Size up?

[@KnoxArmour]

Thanks! Lots of riders using these now and with fantastic feedback. Fits all shapes and sizes, very flattering and sized fairly true. Thanks, Aaron KNOX

[@smithysmith7042]

Are you planning on producing the jacket in any other colours. ?

[@-NeverMind-]

Lighter colors for warmer climates would be nice.

[@KnoxArmour]

Not currently. Many thanks, Knox

[@Fishfood007]

Man I so wish this had other colors then just black. I hate black it is not good for visibility yet for some reason is the standard for protective gear? Is there a good way I can alter the color to make me more visible?

[@sgtshak2806]

Does it flow as much air as the Urbane Pro MK2? I have a UP2 but like the less aggressive look of the Honister.

[@KnoxArmour]

No it doesnt flow as much air as the Urbane Pro which is our most ventilated product. Still great and has fantastic feedback, but not as good as Urbane Pro. Thanks 👍

[@user-sw2lv3zp6o]

Is this shirt slightly looser under the arms than the Urbane Pro shirts/jackets, please?

[@KnoxArmour]

Yes it is overall a looser fit. Hope that helps. Thanks :)

[@user-sw2lv3zp6o]

@@KnoxArmour Yes, it does. Thank you for getting back to me. I am going to watch the review again now, to remind myself of the product. Nick

[@larrydoyle907]

Great video Aaron, what were the additional 2nd layer jackets at the end especially the waterproof looking one?

[@KnoxArmour]

Thanks Larry, appreciate it! Hope you are well? The 1st jacket shown was the Knox Dual Pro Jacket, and the thin waterproof one was Knox Welbeck Jacket. You can see them here - www.planet-knox.com/category/mens-motorcycle-jackets/. Hope that helps, Aaron KNOX

[@lecleve5456]

BIKERS BEST !

[@gabrieljaramillocadavid1269]

Hello I am 14 years old I am an experienced rider. I am looking to change my bike but I don’t know if a 150i husqvarna enduro or a 250 2t enduro husquvarna wat would you recommend me

[@flapjackbeans]

Id buy on today if you did my size when u say 5xl what i start? in inches.. Do u have any trade garments we can review on our channel?

[@richiektm]

Only if it was under £300!

[@sankumarmyprofile]

it`s out of stock when it`s back in stock?

[@KnoxArmour]

Sorry, they are due back in stock in January. Hope that helps.

[@ajoymahato46]

Please mention the song name

[@David_Day]

Any men wearing women's here? How is it working out? I think I'll fit better in the women's cut.

[@themrjerry1995]

I am 158cm 5'2, I am fitting ok on a Man size S. Hope this helps.

[@Mac_okee]

Only für very slim people, completely ignores reality

[@KnoxArmour]

Really not...

[@Inked_CR]

i feel if you had a gut, these wouldn't look so good.

[@antondubkov]

I mean, why not just start eating properly