How To Convert Fluorescent Lights into LED Lights /// 3 easy ways / Parmida LED

In this video I walk you through how to convert your existing fluorescent lights into LED Lights. I will show you 3 easy ways to make modifications to your lights so that they are compatible with LED light bulbs. One of these methods you only change the bulb, that how easy it is, and I will also show you how to bypass the ballast in the light fixture so you can use any type of bulb.
Follow Me on Social Media:
website www.komarproject.com
Instagram / komarproject
Facebook www.facebook.c...
Huge Thanks to Parmida LED for supporting this video.
www.parmida.com
Hybrid Plug and Play Bulbs amzn.to/3lSqNwM
Ballast bypass bulbs amzn.to/2UD1tio
Light Fixtures I used amzn.to/2IJ0x9S
Non shunted Tombstones amzn.to/3kB8hHT
OTHER FUN VIDEOS YOU MIGHT LIKE
Our DIY Dream Home • We Just Spent Our LIFE...
10,000 Pencil Table • Epoxy Coffee Table out...
Wood Lowrider Bike • Making a ALL Wood Low ...
Backsplash Tile Installation • How to Install a Subwa...
Peel N Stick Flooring • How To Install Peel-an...
Laundry Room Makeover • DIY Laundry Room Makeo...
Concealment Flag • Motorized Concealment ...
Walnut Knife Block • How to Make a Solid Wo...
Pallet Kallax www.youtube.co....
MY TOOLS
Bosch Drill and Impact Combo amzn.to/2UdyZg7
Bosch GCM12SD Miter Saw amzn.to/36GabQO
Bosch Sander 5” amzn.to/2OdS7XU
Bosch Sander 6” amzn.to/2OeJs7h
Wood Glue amzn.to/2RJEnpP
Finish Nail Gun amzn.to/2vus1cm
My Quiet Compressor amzn.to/2S3aqA7
My Grinder amzn.to/2GGaDUC
Pin Nailer amzn.to/2lUdbYv
Jig Saw amzn.to/3bFbxyt
Bosch Circular Saw amzn.to/2WGQ15U
Japanese Hand Saw amzn.to/3cfcj5q
My Router amzn.to/2ISNoaG
New Version of My framing Gun amzn.to/3cLRBtO
Nail Removal Gun - Air Locker amzn.to/2nsXYOf
RZ Dust Mask amzn.to/2m2CDLj
Saw Blade amzn.to/2KzsQ8j
Music By: www.epidemicso...

[@SlightlyLessFat]

Anyone else rewind 2 or 100 times to watch Bart get jolted?! Oh man! I was dying!

[@KomarProject]

Lol I did

[@SlightlyLessFat]

@@KomarProject You face was priceless! It was the look of, "I missed a breaker!"

[@RedBairnMedia]

Certainly had me watching again, in a "dude falling off of a ladder" kind of way ;)

[@edover50]

One of the reasons i love this channel, because it’s exactly the kind of thing that happens to me....

[@joemendiola7345]

He was too.

[@clutch2827]

Wow. I had no idea these would work with the ballast. Saved me a lot of trouble.

[@heyallenify]

I just found this video after searching tutorials on doing this upgrade. Just bought my own place, and promptly had the kitchen fixture start flickering and hesitating to light off one pair of the bulbs. Talking with the local electrical supply house because I knew of full 2x4 foot suspended ceiling panel LED fixtures from my last job, but hadn't considered the tube replacement bulbs until today, I found out that the T-12 ballasts in my house draw somewhere between 30-50 watts before you even consider the wattage of each fluorescent tube! Doing a ballast bypass install saves that extra wattage, multiplied by however many fixtures you're upgrading. In my house and garage, that's 6 ballasts eliminated, so looking at the whole set it's saving 240w just by removing the ballasts from the equation. All that said, thanks for the straight forward demonstration of how to rewire the fixtures for LED replacement bulbs.

[@kueichenglee7583]

Thank you

[@JessyRenae]

I had no idea that these were a thing. I'm so excited to tell my husband so he can get one down so I can order these led replacements. I can't reach it even with a step stool. Thank you again!

[@dia9491]

Thank you for telling people about plug and play leds. I had no clue they existed for flourescents till about 6 months ago. I love the leds. I switched in my kitchen and it's amazing. Slowly switching the entire house. I'm saving $20 a month so far on my electric bill too which is win win for me. We switched out florescent with plug and play in the walk in closets and those are amazing! Work well and no problems or dimming. Your shop looks great with those leds!

[@KomarProject]

Ya I didn’t know they existed for a long time. They are the best

[@KitchenerLeslie2]

You’d save more electricity if you bypassed the ballasts.

[@Russ-od2yy]

Spat out my coffee right off the bat seeing the shock at the 20 second mark because I know I have done that myself before! "Ive been zapped enough to take on this task" Haha thats me too! Oh always forget the simple things with electrical sometimes.

[@KomarProject]

Lol haha ya I mean every time I take on electrical it happens. It’s like a curse of the idiot

[@JBeans7711]

Love these Parmida lights! Need to get rid of my fluorescent lights...this should make it easy! I personally like daylight light for working. Nice clear instructions! Thank you Komar!

[@KomarProject]

Thank you JM! Ya the 5000k lights give that day look

Hello my friend. I used 12 pieces of 120 cm long LED lights for my workshop. With these new lamps, your workshop became like a movie set. It's like a theater scene :-), you can make great shots. Congratulations. you did a good job Thank you for sharing. Stay healthy and happy. See you. Big greetings.

[@KomarProject]

Thank you Sahane, led is the way to go for sure.

[@daveginter9030]

I got LED 4 foot shop lights from Ocean State Job lot for $19 they used to $14 may see that price when on sale. I love them! Palstic bulbs and twice as bright! I had a floresant bulb fall on my workbench and explode and I had the glass go into my eyes I'm luck I didn't go blind. I will never deal with them again!

[@TruthTeller20242]

Just did this to my kitchen tube it's way better soon as I get the money I'm doing my garage and the rest if my house too!!

[@NobukiPhu]

As an electrician, I promised myself I wouldn't watch anymore DIY wiring. I broke my promise and saw exactly what I expected... Y'all know electricity can kill, right? And not like, "but yeah, so can a bus" kind of death... Like, one second you're alive and having a laugh, the next your wife is getting remarried kind of death. Thanks for sharing!

[@FearsomeWarrior]

If you keep the ballast in use and go to LED you get to keep all the lag and flickering. It’s wonderful.

[@KomarProject]

Really? You mean if you use the plug and play bulb ? I haven’t seen it but I haven’t looked for it either

[@FearsomeWarrior]

@@KomarProject yeah it’s less annoying but ballasts fail after a few years too. It’s best to bypass.

[@tomaszj.9608]

Love your videos, Komar! I just ordered those bulbs. Stupid fluorescent bulbs be gone 🧨🔥💣

[@KomarProject]

Lol ya I hated them fluorescents. They always would make a buzzing sound that drove me nuts

[@AlphaTroniks]

This is the first video which I watched on KZbin regarding workshop lighting using LED tubes👌. I have been using LED tubes since 2010 in my shop and they're great and very energy efficient 👍

[@KomarProject]

They are the way to go for sure

[@AlphaTroniks]

@@KomarProject yeah😊

[@brainards11]

Haha...that intro getting shocked made me laugh!!!

[@89jmcfar]

Thanks man!

[@marlawhite3682]

great video!! Nice special effects

[@KomarProject]

Thanks so much Marla !

[@SchysCraftCo.]

Great new look Bart can't wait to see ur next video.

[@KomarProject]

Thanks so much Jared

[@SchysCraftCo.]

@@KomarProject ur very welcome

[@Kaatch00]

Looks great

[@KomarProject]

Thanks so much Kaat

[@Sean-Aviation]

by using the LED bulbs, do i need to remove those small fluorescent starters?

[@kueichenglee7583]

Cute

[@SonnyCantu]

Another great video! Keep up the great work. At 9:40 in the video, you are hanging a metal peg board. Can you provide a link to that product?

[@KomarProject]

Ya it’s called a Omni Wall. They have so many to choose from and I love how you can move all the shelving

[@SonnyCantu]

@@KomarProject, thank you!

[@nolenkanozulu6175]

Great stuff

[@shaundizzle15]

Great video as always, off topic but, what organization system is that that you put up near the end of the video?

[@KomarProject]

It’s called a Omni wall. It’s amazing and I highly recommend it

[@shaundizzle15]

@@KomarProject thanks! I’ll check it out

[@youdontknowme2915]

Plug in play for me! Worked beautifully

[@joenava2679]

What if I have 3 fluorescent light fixtures connected in sequence?

[@3dsman]

LED's in these kinds of lights are actually on a 'duty cycle' and not operating 100% on continuously which is why they have such great power consumption ratings. Most LED lights use phosphor... as do Fluorescent lights to smooth out the strobe feeling.

[@the_jonathan_o]

You really went⚡huh?

[@KomarProject]

Yup

[@mvid86]

what if you only have one wire running to the tombstones?

[@KomarProject]

That I’m not sure. You would have to check the specks on your new lights and see if you can make them work.

[@HerminiePA]

You didn't show the actual removal of the old ballast. Sometimes, the screw does not hold steady while you try to unscrew the nut.

[@teacher_of_the_arcane5399]

I'm working of a project with eight foot fixtures. We need one-piece, eight foot LED bulbs for replacements, but can only find two piece bulbs that must be assembled into an eight foot length. So far, none of the two-piece bulbs will work, and we've completely re-wired the fixtures. Can you help??

[@KomarProject]

Not sure what your asking. What’s the question. Sorry

[@davepenprase]

Did you say load coming in??!! That's called the line --really??

[@vjbrunzy1621]

Wonder how many people caught on to the before and after (going from 1 fluorescent light to 10 led tubes 😂) Yes it made your shop much brighter but it would have been a much better comparison if you did same number of lights in the before and after lol

[@KitchenerLeslie2]

As an electrician I hate when novices put tape on everything. After a few years electrical tape leaves black slime on everything, now I’m in someone’s house with black slime on my fingers. Thanks rookie.

[@KomarProject]

Your welcome. At least it won’t shock me again

[@KitchenerLeslie2]

I just did my father in law's bulb conversions, my fingers are all dyed black.

[@SheWhoWoodworks]

Nobody cares when something shitty happens to mean people anyway. Have fun with sticky fingers bro.

[@KitchenerLeslie2]

@@SheWhoWoodworks I don’t care about dirty or sticky fingers (or your mom and I never would have gotten along so well) it’s the fact I’m dealing with greasy black slime and their paint, switches, outlets, light fixtures and high hat trims. And so many people are weird if you ask to wash your hands in their house.

[@lydyamuangte8713]

Where is the led install videos. If you don't want to share don't show

[@pepsicolachao4537]

8:17

[@ginarios9442]

SHLM UHaB (peace & love). The Name of the Creator is Hayah asher Hayah, as what He told Mose (Exodus 3:14), preserved in the Hebrew Scriptures. There is a curse to the G-o-d name (Isaiah 65:11-12), preserved in the Hebrew Scriptures. All followers of the Messiah are to do the 7 appointed times (Leviticus 23), but no more animal sacrifices, following the Crucifixion of the Messiah. We are now of the order of MLK TSDQ (King, Righteous), to Whom ABRaHM tithed. Ask the Messiah to be your personal Savior. He said to him, I am the way, the truth and the life. No one comes to the Father except through Me (John 14:6). He is the Atoning Offering for mankind for the remission of sin (1 John 2:1-2).

[@lettersandnumbersuc]

Wait!! Before you do that... Here is the only warning your most likely ever be told... These lights are great on efficiency but... are very bad for human eye sights... Nobody is going to tell you this information... It’s being suppressed for the moment... Until they are made in the USA with the correct technology, these lights can harm your eyes over long periods of time... I should know, I’m a industrial designer with a background L.E.D technology... Light heals your body if it is on a certain spectrum.. just like the Sun... Some light is bad for you...