ETHiX CINERAT 🐀 | FPV

[@barongfpv]

Hey man could you share the PID's please, urgenty need them to fly, the motors have heat issues and the yaw makes unpredictable movements. Fc kiss ESC kiss. Is unisable for work plus very dangerous.

[@freshconnekt]

glad ur puttin content out again!

[@EricKonasty]

Thanks, me too

[@amirmehler]

Eric. I want to build this little thing but you didn’t answer anything there: what battery do you use? How does it handle the different sizes and weights? How does it rip without the extra parts? How do you tune it? (Stock? Can you demo?) how do you fly it without OSD? What do you still get in smart audio?

[@explosivefruits]

Amir Mehler he said it in the video 5:51

[@EricKonasty]

I’ve pretty much answered all those questions besides tuning which can’t be answered in a generic way. 🤷🏻‍♂️

[@carlonchino]

what propellers do you advise?

[@TheDroneNerd]

What filament/color are the ducts in the thumbnail printed in ? They’re like a tan or beige color. Thanks Konasty I love my cinerat.

[@kalebklein5665]

I think the ducts are more for protection when doing cinematography and flying inside places.

[@globalbusiness8457]

Nice! How's the prop guards? Won't it be too soft?

[@JustinRayHadley]

Awesome update video 🤜🔥🤛

[@mikeyama7277]

Hey mate would you share your pids and filtering 😬 I just finished building it and I just did a test fly for like 20 seconds and the motors are burning hot. Xing 1507 2800kv Im using 6s 1300mah( I know its super heavy) but should be fine as would be even heavier with a gopro 8 and 6s 850mah. Thanks!

[@Nickc582]

Can you please share the pids and rates for this setup I’m having trouble getting it tuned right

[@barongfpv]

me too

[@DVCJoe]

Hello, what pids and filter settings are you using on this rig? I’m having heat issues with the motors after a pack. This I’m not sure how to tweak this to be safe.

[@barongfpv]

me too

[@TheDroneNerd]

Are you using kiss or bf ? Analog or digital ?

[@DVCJoe]

@@TheDroneNerd BF and analog. runnig weight of 575 G.

[@DVCJoe]

I have found a bent motor and will be replacing that soon.

[@Nickc582]

Can u please show how you have the evo hooked up to get the osd u described

[@clifford_wakeman]

Finally. No need for ducts, just prop protection. Nice work dude.

[@EricKonasty]

Thanks dude

[@colewould6917]

I want to see what this cinerat can do!

[@DeanChapmanFPV]

First🤗 Looks super tidy Eric and I’m sure it will be a hit 💥 you guys at ethix sell good products 👌🏻 I brought them 🤗

[@EricKonasty]

Thank you 🙏🏼

[@biggfpv2721]

It's about time bud! Great to see a video from ya

[@BGUFF]

Love it! BOut to buy one but I first want to know the dry weight, fully assembled with all the 3D printed parts. No electronics. Thanks!!!

[@washiy]

Got the frame and flat rat motor. The motor screws are too short to go through the arms to mount the motors. Was longer screws suppose to be supplied?

[@EricKonasty]

Let me check with QC thanks for the info

[@ThatFlyinRyan]

Best clear cam I recommend it to any one building a cinewhoop ! Caddex ratel

[@EricKonasty]

Yeah it’s pretty good

[@SpikeJonesTheCr0oked]

I see that clear XT60 on the 6 inch. I love clear stuff..... props, nylon hardware, heat shrink... you name it I rock it in clear.

[@EricKonasty]

Yeah it’s a cool plug

[@Nickc582]

Got it all set up thank you so much for all the info I put the RunCam hybrid and if I absolutely need to use the gopro I can do that as well but having the osd info on kiss is definitely a life saver and game changer

[@tomrob8647]

Do you think some 1407 3600kv motors will do good with the cinerat? I have those motors on a cinewhoop, thinking on transfering that setup to the rat

[@PeterPetermann]

that seems a pretty cool frame, I guess if I see a german store having it, I'll get one, but either I missed it or you didn't say it, but whats the total weight of your build (incl. gopro and battery)?

[@sslfreak]

Bisher hat noch kein Shop in DE den Frame. Habe mal direkt bei TBS bestellt, bin gespannt wann der ankommt :-). ATM no German Shop hat a Cinerat. Ordered mine directly from TBS.

[@PeterPetermann]

@@sslfreak I've messaged with someone from a shop here, asking if they are going to have It, the reply i got was that usually TBS frames aren't selling well, but that they'll consider it. I'm kinda reluctant to import myself, as customs seems to be hell bend on making it a bad experience for me every single time

[@smailmilak]

Hi, I will be in Regensburg next week. Do you know a well know Drone shop that I could find? I tried to google it but nothing...

[@PeterPetermann]

​@@smailmilak if you mean offline store: sorry, I don't know a single one in germany - i know a few RC hobby stores that have drone parts, but usually those sell outdated overexpensive parts.. Online shops there is a few, flyingmachines rc-hangar15, to name two that I purchase from (both .de domains), fpv24 also comes to my mind.. but offline? no idea

[@smailmilak]

@@PeterPetermann Thanks. I will check them out.

[@hueyvelcro3025]

Just built one with the hobbywing 60amp stack in it but having serious issues with it flipping out on fast throttle is there any chance I could steal your PIDS and filter settings for a baseline ? Ive tried a lot of different settings but starting to think I have faulty hardware in there somewhere . A baseline for settings would help me a lot . I have a 4s version already built and was so impressed by it I had to build a proper one with the rat motorson 6s The Caddx Tarsier fit inside beautifully BTW !

[@EricKonasty]

Send me a DM on insta if you got it and I’ll see what I can do 🤙🏼

[@3li9]

it is just awesome can t wait to get mine;) which props are you flying with the flatrats?

[@ktmjay9920]

Good to see you again.

[@blizzardfpv9584]

Definitely getting a set of flat rats For a cina-whoop that a friend is printing for me. 6s and don't look back

[@Techwonderland]

Nice! Good to see you back. Will Flatrats be coming in a 4s version?

[@EricKonasty]

It’s a possibility but will have to wait until after cny

[@Mawragfpv]

Anyone got PIDs for this frame? My flatrat motors are buring hoooot

[@brunogp8269]

Does it have holes for 2 20x20 stacks?

[@mr.flymoore1696]

Were can i get that shirt your rockin??

[@EricKonasty]

Dirtbikekidz

[@Nickc582]

thats awesome im definitely want one and can’t wait

[@ivoryviking]

😆 I just emailed you guys threw your WS about all this info. I’m not sure why I was not subbed to you Eric. I’d still like to hear your thoughts on my Q’s. Thanks for this quad set up. I was just getting into the ceni’s and was going to go squirt. I dig the rat option of a good little ripper too. So what’s with not getting the little carbon fiber star plate to help secure the motors? So screw do not rip threw 3d mount. Was mention on the lounge but I did not get in my package. 🤙🏻

[@Gilbert.Jeremy]

Same here... just finally got them in today from TBS. Open a support ticket they will take care of you, they 100% are supposed to be in with the carbon kit is what I was told from TBS Support.. I basically had to send them a pic with the missing parts circled and they sent them out to me.

[@MIKEYDREADFPV]

looks great bro.

[@kylellrc799]

Do the flat rat motors have 3 or 2 mm shafts?

[@EricKonasty]

3mm

[@ch3w3yfpv42]

My next quad for sure!!!!!!! GET SOME!!!!!

[@sksss1]

personally i prefer the 2203 stan of 3450 but your comments are from someone who knows what he's talking about, you won a subscriber. (old but good video)

[@StephenPeot]

I might need to swap out my squirt for this! Good work guys.

[@EricKonasty]

Thanks man

[@mrzon9344]

Long time.. looks like a stout frame whats the weight?

[@DroneSkinz]

Hey E. Love the Cinerat. Dope Tshirt man. How much for a 3X? Very interested. Thanks bruh.

[@sleepyheadfpv1507]

Bro the cougar sound and fuckin rubins intro uhhhhh played in my head right when you said team failsafe! Been on a binge of the podcast tryin to catch up! Haha

[@EricKonasty]

Haha sick

[@boardguyman]

Looks Cool and cute!!!

[@valiant360420]

Great idea to develop this thing. Cinewhoops seem to be the next big thing. 😜🤘🏼. Does TBS make money if I buy it though? 🤔🤨. Good to see ya

[@PropagndaX]

Dang bro 30x30 stack in the 3”? Savage. I need it

[@EricKonasty]

Full savage

[@TheDroneNerd]

Eric Konasty wouldn’t a 20x20 be better ? Or do you recommend 30x30 instead ?

[@jasonhull5712]

Dayum son ! I run 1100 mah on my 5" and you running 1000 mah on a three inch eh ? I wasn't interested in any of the other whoops, but this one I'm gonna have to build and check out. Thanks Eric.

[@EricKonasty]

Yeah man, I mean you can run an 850mah too but I like the flight time on a 1000mah and I don’t have to carry extra packs to a shoot

[@jasonhull5712]

@@EricKonasty it just gives a perspective of how much weight that lil guy is lifting, a 1000 mah pack plus a gopro? That's a full load for little guy ! That's perfect tho for what we need them to do, I agree with you on the ducted setups. They fly kinda wonky. Imma build one of these, now you got curious. 🍻

[@justinasv4342]

Nice video interesting idea without the ducts and hi

[@WilsonTxmp]

Hello friend, welcome back.

[@SVNG63]

how much is it please❣️❣️❣️

[@joeboe7595]

How have I never seen this guy and he almost has 50 million subscribers whoops it wasn’t going through correctly

[@freshconnekt]

Ghost Killer fortnite He has been on Hiatus... He is one of the originals right next to Steele.

[@FullCT]

YASSSSSSSSS!!!! 🐀 🔥

[@yawfpv6814]

Yess.. i can see mr eric agaiiin....

[@franc520]

where you been? we miss you buddy

[@EricKonasty]

Just workin

[@MrCineris]

Average flight time?

[@EricKonasty]

Ripping or cruising

[@MrCineris]

Eric Konasty average cinematic shit

[@cubanfpv]

@@EricKonasty cruising

[@TheDroneNerd]

4-5 mins using 850 6s. But this bitch is hard to tune!!

[@hallio111]

dammit, this guy flys so much, he's got a bruise on his noise from his goggles..:)

[@dwobstacles]

Why 3 inch when 5 inch can get you the same footage? and with no chance of getting it under 250g?

[@12bladedfpv10]

You didn't even show how it looks with prop guards. Didn't liked woops so went with 6s¿ would you mind even say which/what-capacity battery is recommended. And Kiss is so premium still outdated - 30.5x30.5mm on 3 inch sounds so redundant... Paired with caddx and 3D printed prop guards- reliability on question mark... I would say it's just Ethix's bad attempt to bite share of growing Cinewhoop market

[@EricKonasty]

It’s not a Cinewhoop it’s a Cinerat. Way more savage bruh. But honestly I can tell you didn’t watch the video cause I answered all this. Pssshhhh 🙌🏼👎🏼

[@tonyvelasquez9432]

Damni.. build me one.. I might even put a wing down for a minute

[@EricKonasty]

I’m going to make some RTF kits soon

[@tonyvelasquez9432]

@@EricKonasty well let me know noob ! I'll probably get one

[@OliFPV]

Interesting Cinewhoop/Rat 😍👽👍👍👍 like and sub done 🍀 ill stay tuned 🍀

[@EricKonasty]

Thanks 🙏🏼

[@anthony445]

me: fuck cinewhoop! ethix: here’s the cinerat me: holy shnickeys i need me one of dem

[@EricKonasty]

😂😂😂

[@pauliman1098]

Bruh... so much unnecessary weight having be 30x30 nice frame but damn seems like it could have been way more efficient

[@EricKonasty]

You can run 20x20 also

[@swissfreek]

You’re tiring here talking about your new frame and all I can think is “man, I wish I could find one of those old school magnifier lamp things somewhere” 🙄

[@swissfreek]

DayzMennis yeah I know they’re out there, I just meant an old one like he’s got. My dad had one he salvaged from somewhere, loved that thing.

[@mr.flymoore1696]

Yo nasty what up!!

[@EricKonasty]

What upppp

[@JoeMaxFpv]

No flight footage. Boo

[@EricKonasty]

The footage I’ve gotten with it so far I can post yet but I’ll have some personal footage soon that’s not just boring test footage.

[@ThatFlyinRyan]

No way a cinerat sayyy what no way dude ! Lol

[@ankorsteam]

ditch the sma pls