🍎CPT変換 直交座標系のx軸に ±1を設定する。 z軸に 時間を設定し、 ±1を決定する。 x軸の-1 を スカラー荷電量とする。 +1を空間の距離の単位1と 設定する。 z軸の単位時間+1は 直交座標系のxy軸平面の原点0を中心としてz軸は回転する。 回転は左巻き・右巻きを 取れる。 直交座標系の各座標軸は 多重項として縮約されて 1つの座標軸のように見える。 座標軸が観測される場合は 少なくとも1つはある。 座標軸が観測されない場合は直交座標系の原点0に縮約されて同一視される。 観測されてるにも関わらず観測不能の場合は他の座標系の原点0に縮約されるか、 他の座標軸の無限遠点に飛ばされている。 🍎CPT transformation Set ±1 on the x-axis of the Cartesian coordinate system. Set time on the z-axis and determine ±1. Set -1 on the x-axis as scalar charge. Set +1 as the unit of spatial distance 1. The unit time on the z-axis is +1 The z-axis rotates around the origin 0 of the xy-axis plane of the Cartesian coordinate system. The rotation can be left-handed or right-handed. Each coordinate axis of the Cartesian coordinate system is contracted as a multiplet and looks like a single coordinate axis. When a coordinate axis is observed, there is at least one. When a coordinate axis is not observed, it is contracted to the origin 0 of the Cartesian coordinate system and identified. When it is observed but cannot be observed, it is contracted to the origin 0 of another coordinate system, or it is jumped to the infinity point of another coordinate axis.