DIY Fan Clutch Replacement On A Paccar Engine. A Step By Step Guide, How To Remove and Replace It

[@edjahman]

Thank you so much for the videos. As a single oo, it's a gigantic help. Wild Bill fan club!

[@THExLAWxMAN]

You guys make it look so easy.

[@scottpearsontoolsmore185]

Great job and video thanks my friend keep up the great work. I like the setup you don't have to support the hood when you take the radiator brackets off. Great job see you on the next video thanks again. I do remember rebuild kits for the clutch fan did a few in my time.

[@KoonTrucking]

I wished they still allowed you to actually fix a part instead of replacing a part. Guess the good ole days of trucking are long gone in more ways than one. Thanks for watching and thanks for taking the time out to leave a comment.

[@j.c.smithprojects]

nice repair guys! just like everything else made today...dont repair it....throw it out. then go pay the big money for a new crappy part. johnny cash...one piece at a time...one of my favoriites. thanks for hanging out in my live stream yesterday!

[@KoonTrucking]

Hey I really enjoyed it you have some awesome stuff going on over there ! You know the trucking business and we are on the same page about so many things ! It is a shame the way they build parts, the days of actually fixing parts is almost gone to the way side by replacing and wasting money ! I hate that ! Thanks for watching and thank you for taking the time to comment.

[@brettsnyder9806]

Excellent video love your repair videos! !!!! Thank you for the letter and awsome magnet! !!! I will be putting it on my tool box at work tomorrow

[@KoonTrucking]

Brett Snyder not a problem my friend. Thanks for watching and always commenting. I really appreciate it.

[@truckn]

My fan quit working and what I am wondering is why the manual override switch doesn't work either. Thanks for this video. 👍😎

[@KoonTrucking]

Because the clutch is out. Those work opposite than the old ones. The old ones when clutch went out fan would stay on the new ones rely on air to push the clutch to make contact to spin the fan (I know stupid design that leave you stranded on the road, unlike the old ones that let you keep going but just hurt your fuel mileage) You will have to replace it

[@paultro8457]

I've been driving trucks my whole life and I always thought the fail safe on the engine fan was one of the smartest designs an engineer ever came up with. Makes sense they would change the design since it's been working great for many many years. Hahaha

[@unsub5047]

Do you have a video on why a fan comes on and off?

[@raymondpeters8106]

This is awesome!! Thank you guys so much!!

[@trucknp5830]

Hi, Did you grease that o-ring before installing?

[@quocbinhduong-pv4ef]

thanks chú nhiều lắm vì clip này hay nhưng ngắn wá.

[@scottlee7324]

love the pry bar trick. I have used this many times.

[@rubberduckyconvoy2723]

Great video. Thank you gentlemen.

[@KoonTrucking]

Oleg Vishnevskiy thank you for watching and taking the time to leave a comment ! I appreciate each and every view.

[@draconis0469]

My mechanic didnt take any of those supports off or undo the turbo hose... had it replaced in a couple of hours.... ROADYS TRUCKSTOP DOUGLASS WYOMING.... BUDS TIRE AND SERVICE

[@philfredericks5198]

Don't you replace the pulley/hub bearings at the same time?

[@chrischiampo8106]

Good Job Bill n Clay have a Good one Via Florida 😎👍🏼

[@05trucker55]

Good job guys

[@daronwilliams2692]

What’s an easier way to change my fan belt on the paccar Mx-13

[@remaco6670]

awesome job thank you

[@ProMainMan]

I’ve got a different problem. My air compressor is leaking and I think it’s sending a little dab on oil through the whole pneumatic system. I believe oil has been blown thru that 1/4in line and I believe the clutch ring/plate is coated in oil leaving it to run nonstop. Of course the noise, fuel mileage but it’s making the A/C not cool. Anyone come across this do you think that’s a possibility? I did see a tiny bit of oil on that 1/4 line where it goes into the top of the clutch. Thought about spraying parts cleaner down that tube and just take it off up on solenoid. Ideas?

[@DLSWV]

👍😉. Thanks.

[@americanfreedomlogistics9984]

No center hub nut?

[@drumgodtim]

Enjoyed it!

[@BeardedSeabee82]

Wierd they dont have rebuild kit for those. We had one go bad one of ours, had 2 levels of kits and went with more complete kit to rebuild one on the cascadias. Always gotta stick them in pain in ass to get to places now a days though

[@KoonTrucking]

Bearded Seabee82 yeah guess paccar figures you can spend a little more money. They have those stupid proprietary filters only they can sell and they jack the price up on them because they don’t offer an aftermarket so you gotta pay $58 for a fuel filter (our cost). Guess they aren’t making enough money ! Haha

[@silverfoxxsound6768]

Hay I some help I pull all the bolts I can see and I still cant get it off

[@KoonTrucking]

There’s a bunch of them in there. They are only an inch apart or so.

[@silverfoxxsound6768]

I dont think I got all the bolts can't find all of them where are they

[@silverfoxxsound6768]

Ok I got all of them and it came right off

[@silverfoxxsound6768]

Ok I got it thank you all thank you

[@ekeller88]

Thanks for this video, made changing my mx13 fan clutch easy!

[@KoonTrucking]

Glad we could help out. We have a bunch of videos. Check our the DIY truck fixing playlist on the channel.

[@ekeller88]

Been watching all you Paccar videos, nobody knows anything about the MX13 like you guys!

[@KoonTrucking]

That’s Pretty much all we work on day in and day out ! We do it all

[@henrynavarrete6136]

lol cover it up to prevent a bird from making a nest lol

[@MICHAEL-vu3dc]

Nice

[@AnthonyGman]

What does this job cost out the door? Mine just shit the bed

[@snowman1194]

nice job

[@stevenjones1824]

Did he put that v band clamp lock nut on backwards?

[@KoonTrucking]

Steven Jones it was but we fixed it I meant to show that on video. We were in a rush to get the truck out. Always happens seems like when you rush. Always the simple mistakes seems like. It was caught right after that shot was done.

[@ProMainMan]

I hope the factory used Allen head bolts and not star to feign with. I’m about to tear into it roadside and don’t have star sockets

[@emorycoker9302]

Which you had add part number

[@KoonTrucking]

Got to get it at a dealer so …. They will know the part number anyways when you call

[@bigdaddypat3697]

Great job Clay & Bill like always you made it look easy. B-Safe

[@camshaftP16]

Those Borg-Warner fan hubs are junk, Paccar thought the Horton hubs had a high failure rate and switched to BW, then hub failures went up 50%. Nice video, still hate the MX engine.

[@kurtmursu5291]

Paccar made Borg Warner make a new fan clutch just for their trucks. Paccar wanted it to be lighter weight than the original Borg Warner fan clutches, so they made the top part of the fan clutch out of aluminum (bad idea). They had a lot of failures because the friction material would wear into the aluminum top, which you can see in this video when they disassemble the fan clutch. Borg Warner has since obsoleted this aluminum design and went back to the all steel design for the Paccar applications. Kit Masters also offers a replacement option, part # 8801N.

[@Redbikemaster]

@@kurtmursu5291 just looked this up. The Auto Lock feature sounds great

[@capnjimmy7357]

👊

[@robotvacuum1957]

That man has all access to a koon Trucking hat and he’s wearing fedex!

[@KoonTrucking]

B Salvadras haha 😂

[@stevenjones1824]

Y'all need to invest in a ct761

[@KoonTrucking]

Steven Jones I want one of the 14.4 but i figure i will wait. I’m sure they will come out with a brushless motor soon so then it won’t be long before i would have to upgrade.

[@marisabeltran3084]

Eeeeehhhhhaaaaaaa