Knife Making - Circular Folding Knife

[@winterprizon4798]

Where can I find a template for this knife?

[@Koss-channel]

here you go: drive.google.com/file/d/1K7K7fZIrOXifWIju6eWJOcMkmxK32rTP/view?usp=sharing

[@winterprizon4798]

@@Koss-channel Thanks!

[@THESLlCK]

@@winterprizon4798 you couldn't figure this out yourself??

[@alengebles758]

@@THESLlCK the fuck is your problem??

[@CarlAquaForce]

@@THESLlCK I'm glad he asked actually.

[@ryanblystone5153]

The fact that you do this without super expensive precision machinery is inspiring. Thank you

[@olhamartynyak8740]

Incredible! every single step looks so easy, but I can't imagine how it is really hard to create and then to produce it. Bravo!

[@Koss-channel]

thank you =)

[@thejackpot6928]

@@Koss-channel When will you make an OTF knife

[@MrParker_1]

Easy? Cutting that channel with a jewelers saw would have been the biggest test of my patience...

[@johnparsons9084]

Was just going to comment on that. Picking up the jewelers saw at the start of that cut....that channel must have seemed like the Grand Canyon. Doing the whole thing without a mill....just remarkable. Lad has skills. Michelangelo with an angle grinder.

[@angrytom1923]

@@MrParker_1 Yeah, at first I was surprised he didn't use an endmill there, but then I realized his mill might not have motorized CNC axes. I can't imagine how long that took.

[@brokenwillbrute5197]

The way you make each different folding knife open is always a surprise. I try to figure it out before you put them together, but it's rare that I do! Another fine piece good sir!

[@ddervish2]

That recessed pin placement was perfect

[@42Hertzer]

Nice design! Can imagine a spring loaded ball-bearing with a indention closed and fully open would give a nice tactile feedback if implemented. Not that I would have the knowledge to achieve it my self but a master craftsman as you could probably pull it off... ;)

[@erso3302]

Was thinking the same thing. A detent on the back-right corner and some knurling on the surface.

[@BenjaminSteber]

As nice as this design is, it would want it to have a locking mechanism. Even a minimal indent catch at the base of the knife would make the blade more sturdy in the hand.

[@infinimetrical]

I can see this as well. One for opened and closed. It would help with safety. Could likely put one or two at the base of the handle that activates by pressure of the thumb for opening and closing, it can be housed behind the brass cuff held down by pins, and blocked by the framing. Another way, and initially crossed my mind is around the swivel assembly. Small, but strong spring and stainless steel pin that resides and works copacetically with the slide. Pinning to the frame only enough to hold it in place without completely locking it. The pin concept could also be used with the first model. Strong magnets are a potential, however, magnets can lose their energy through time, and sometimes are not good for certain areas or work. In other cases, magnets are also great for survival situations. Adding more brain tools in everything carried.

[@damianolak8290]

Respect for hand cutting lock groove!

[@robertmceuen3630]

Wow. Craftsmanship, ingenuity, artistry=excellence. Thank you.

[@johng4175]

Absolutely love all of your designs. I find your videos a freshing rechange from constantly seeing these huge knives that I would never personally carry. Keep up the good work 👍

[@KeredAglo]

Yes, I feel the same. Clean simple minimalist design that let's the movement of the knife speak

[@TheGreatSnafoo]

Looks as if it's probably one of the safest knives to open and close I've seen.

[@CarlAquaForce]

One of those posts where I find myself watching every little detail. Nice work.

[@andrewnelson4496]

The fit and finish of the pieces that you make are unbelievably precise and tight!

[@pjhalchemy]

Really excellent videography! You've stepped up your game Koss! Well done grinding on such a stubby and the idea of a semi lock with the pin when open is ingenious! Thanks for all you bring!

[@WockToPoland]

Masterful, one of the most original knife makers I've seen.

[@biddinge8898]

He makes sanding look so easy

[@ИгорьАндриенко-ы9г]

Чудовий ніж. Майстер - золоті руки!

[@dragonrestoration2811]

You are so talented. I could watch these all day

[@marlostewart1107]

Cool design. Definitely something I would add to my collection.

[@kulebyakinjoe]

WOW, THAT'S QUALITY!!!

[@creativeinhead965]

Whoa, someday I'll make such sharp objects :)👍

[@zzAleksandrzz]

Шедевр !

[@artofchickens]

Awesome video to watch at 2AM!

[@godsangryhands4499]

Aaas Usual.. I Want IT! Thats sooo unique! Thanks

[@stoyanatanasov8012]

Satisfying as heck!!!!!!

[@NineteenEighty8]

amazing work. ignore those clowns downvoting, they are most likely downvote bots from a jealous rival channel.. sure this isnt exactly blacksmithing but still amazing work. atleast you never claim to be a blacksmith like some of these guys who angle grind most of their knives.

[@llaappiiss]

И задумка и исполнение, как всегда на высоте!

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера.

[@vcommandarv5916]

It's a brilliant design but it need a back spacer/barrier to protect the fingers from the blade's edge when in the closed position

[@RowToney]

This is like the thrust bearing of balisongs

[@АнтониоПетров-я7щ]

Дорогой Брат, отличная идея от замысла и до воплощения!!! Шикарное перо получилось!!! Не хватает только клипсы, для удобного ношения на ремне!!!😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺

[@scottwallace4864]

Oh man, I love your work.

[@siriosstar4789]

This knife has such a simple yet beautiful look to it . it looks like it would fit perfectly in one's pocket . Very nice 👍

[@infinimetrical]

This is a sweet design, definitely a great knife for anything.

[@jerryjohnsonii4181]

Impressive !!!!!!!!!!!!!!!

[@skcrary]

This is one of my Favorite Designs of yours!! Well Done!!

[@MrTeklar]

What a nice little nugget!

[@wonderboy3513]

Awesome build, and great video, very professional as always. Always looking forward to more of your videos, keep them coming;)

[@glenpaul3606]

Very Kool knife. Great job in building it...quality workmanship.

[@alexobrien4466]

Beautiful, functional art.

[@SlimakaGS]

Шикарная работа! 👍

[@vonHannersdorf]

Very beautiful little knife. It would fit in my pocket, haha.

[@MrV2u]

That’s some fine craftsmanship right there. Great work brother.

[@frankmoreno6866]

I applaud you sir! You have real skills

[@billdoolinofficial]

This is amazing. It looks like a flash drive. ❤

[@NedimTabakovic]

MagBlade brother 🔪⚔️

[@Siamak9301]

دمت گرم خیلی زیبا بود

[@marylewis3311]

Really nice fret sawing. 🙏❤️🙏

[@BigDadGigaCHAD]

Really love your knives. This one came out amazing as well. So good 🔥🔥🔥

[@nasusmain7511]

Interesting Design, futuristic as always

[@CaratacusCadeyrn]

Awsome design and execution!

[@dillwoggett8698]

Good job

[@cashel1111]

such a simple mechanism, and looks very clean! Well done that thing is gorgeous

[@wgemeinhardt]

Really nice work. Great design.

[@chakireladraoui9331]

Good my friend

[@sundaynightdrunk]

Really clean work. If only you could open it with one hand, but it looks very solid.

[@rhodie33]

Very cool, I want one.

[@ahiruppoi]

cool knife

[@strokerace5468]

Pretty cool

[@ed.sol.crafts]

Thank you for sharing! I will definitely make a version of this!

[@kristian5515]

Bloody hell, this little thing is cool - maybe you should concider putting it in production. Anyway, very very nice knife!!

[@ВиталийЮдаев-щ9я]

Очень оригинально! С удовольствием себе такой приобрел бы!!

[@pepechenogug]

🎉🎉🎉🎉🎉🎉🎉 I love it.

[@ИванСтаров-ы7х]

Фантастика!

[@fotticelli]

Beautiful design.

[@privatesector0422]

😁 you are very talented human 👍

[@brianrossi4679]

Very cool.

[@beasthunter7480]

Man I would love to be able to get a custom hand made knife or something from the knife makers mind like this! Customs are so high I don’t know if I’d ever be able to get one. I love the craftsmanship in your knives though they are professional in my opinion for sure

[@TheRealLongname]

If it could lock in place it would be legendary

[@stevenkeithley4336]

Awesome blade and video bud, keep'em coming. Wishing you and your family the best. Stay safe and be well brother. 👊😎🤙🍻🇺🇸

[@craigbird8191]

AWESOME!

[@johnbradford9235]

Beautiful little unit that is mate 👍👍👍. 😎

[@krispipermel]

thats cool i love it

[@pmm4177]

would it not be quicker to putthe straight edge of your pattern on the straight edge of the blank? as a fabricator of almost 25 years I've never not used a straight edge of sheetmetal whenever I can

[@polarixmusic6576]

i wanted this is art omg i buying this knife

[@nico-max]

Super cool excellentte idée bravo 🥂

[@austindesautels1014]

I know nothing about knife making, and beginner with metal work.....what is the reason to line up the stencils so far from the edge, instead of lining one edge of the stencil near the edge of the piece of metal you're working with? Just curious...

[@justinelliott3017]

Great content

[@anatineduo4289]

Nice work on that arc slot!

[@dixonqwerty]

Really nice!

[@bokusimondesu]

Beautiful

[@willota3450]

man itss really awesome

[@resurgam_b7]

Grinding and drilling titanium, cutting 3/16ish steel with a jeweler's saw, a full flat bevel; are you doing penance for some horrible sin or do you just enjoy torturing yourself and your tools :P Jokes aside, that is, as always, a very handsome a knife, excellent work!

[@MCsCreations]

Beautiful work, dude! Really well done! 😃 Stay safe there with your family! 🖖😊

[@futabaisekai4492]

Fine cuts

[@haraldsteffens4293]

Great Work!

[@sebroots6637]

Magnifique ; ) Bravo champion👍

[@Olya.Pavliiuk]

Wow! Very nice job 👍

[@billyfoster3223]

Great work! Amazing!😁👍🛠️⚒️

[@saifuldarussalam3322]

Amazing bro!! Great Job!!!

[@거리에서-n2h]

끝까지 보게 되는 영상...

[@shieldcaptain54]

simply fantastic work, a truly great custom knife. i do have two suggestions though for any future iterations of similar knives, though keep in mind these are coming from a guy who doesn't make knives but does use them for multiple hours a day while at work and has been at the sharp end of a broken knife more times than id care to admit. 1) the scales of the knife are fantastic, clean and simple, and no doubt strong, but that super clean finish would seem to make the knife hard to open and close with one hand, some simple texturing on one or both scales would do wonders for being able to manipulate the action of the knife. something as simple as a divot for a finger to rest in as you rotate the blade in or out. 2) there's no lock on this knife, which worries me slightly. as is, when open it appears the blade can be nearly closed on the fingers if pressure is put on the backside of the blade, now that shouldn't be an issue with a firm grip but the one instance where i see that being a problem is in a slip. of there were a simple cam or slide lock at the base of the knife to really hold the scales together and prevent them from splaying apart in the hand then that would improve on the safety of the knife. those aside, great job. its content like this that really makes me want to get into metalworking of any kind.

[@nikolaihedler8883]

Regarding (2): It actually can't be closed without flipping the front scale all the way around, as the pin from the front scale acts as a stop. I have a hard time believing that this design could be safely operated one-handed even with texture, though, because you'd have a hard time holding the non-moving scale.

[@Niksow]

Can we have the drawings to try and make one. Incredible work!!!

[@scdub]

Very cool! Well done!

[@-dystopic-]

Such a cool knife man, awesome job!

[@TheVirgilio77]

Magnificent

[@philippehillion7294]

Excellent... Good Job...I want one please 😜

[@franbaburiic8154]

cool bro, i love it

[@kashanshoukat1868]

Impressive 👍

[@TSchulzeMasterClimb]

(in portuguese) Obrigado por compartilhar! Saudações do Brasil!

[@26jared1]

Very nice!