KPI Optimization For Dummies: Introducing the 5G & LTE KPI Optimization Matrix

[@OurTechPlanet]

For LTE KPIs, Call Flows & Optimization, check out the complete playlist below :) 🌐LTE KPI Optimization 💡kzbin.info/aero/PL4OXTttOk9WiA1ogmEIBYmFO_K2EhgLln

[@swarnban8634]

Is this Interference Mitigation Feature a feature of CA?

[@swarnban8634]

Mr. Ali's each word is 'GOLD' .every word has an information , which can help you to be good optimization engineer.

[@OurTechPlanet]

Thanks a lot! :)

[@liton31]

Again a Masterpiece :) videos are really End to End!!

[@OurTechPlanet]

Thanks a lot, Sanjay :)

[@mohemedahmedali6339]

One of the best channels that has the light bet to our knowledge shoulders Thanks. good luck guys

[@OurTechPlanet]

Thanks a lot for the kind words! :)

[@5RAMAR5]

You nailed!!!Great information and very well explained!!! Thanks 🙏🏼

[@OurTechPlanet]

Thanks :)

[@formaniteone]

Superb Awesome Outstanding I am short of words how good you explained

[@OurTechPlanet]

Thanks a lot. It is great to hear such positive feedback. Do help us in spreading the word :)

[@jorgeduarte3873]

This is amazing brother keep uploading content. Do we need a drive test to get TA, path loss and MSC or can we list the counters? just wondering.

[@OurTechPlanet]

Thanks. Normally, TA, Pathloss and MCS are also present in counters but counters provide it for the whole cell (all users on the cell) while Drive Test will be for a particular user so more detailed analysis can be done.

[@khanparvez400]

Very nice explanation in simple wording

[@OurTechPlanet]

Thanks. This is what we strive for, to simplify difficult topics :)

[@narsimulubavikadi6834]

Very good analysis impressive

[@OurTechPlanet]

Glad that you liked it. Thanks!

[@imthiyazali]

Very well explained

[@OurTechPlanet]

Thanks Imthiyaz!

[@houseprophet5612]

Thank you so much ❤

[@OurTechPlanet]

You are welcome

[@discoverrealitytv6454]

Thanks... Well explained

[@OurTechPlanet]

You are welcome

[@mbilalrazzaq5800]

In Case of congestion what KPIs one should check to plan placement of a capacity site apart from TA if all the resources has been used. Thanks

[@OurTechPlanet]

In my opinion, KPIs can indicate that a new site is required but the placement itself is not something that will directly come from KPIs. It will come from a combination of KPIs, field visits and planning tool outputs.

[@artindance2992]

Good one

[@OurTechPlanet]

Thanks

[@atishjayalwal215]

what in case if we face both data and control channel congestion at same time

[@OurTechPlanet]

Load Balancing and Traffic Steering should work in that case as well.

[@riteshpanda3681]

What would be consider as high TA value?

[@OurTechPlanet]

This depends on the network, band and geography.

[@m.karthikeyan6482]

Where is the location of frames ? in module box it was programmed or what? Can u please response for this.

[@OurTechPlanet]

Can you elaborate the question? Which frames and module are you referring to? At what point in the video?

[@m.karthikeyan6482]

@@OurTechPlanet not in this video,,we are studied about the frame structure right...so where the frame structures are presenting ,,in module box or what?

[@OurTechPlanet]

@@m.karthikeyan6482 If you are referring to how frame structure is actually created and transmitted, that is done in the gNB using signal processing modules.

[@m.karthikeyan6482]

@@OurTechPlanet module box right?

[@brajbhushan6358]

Please help, if cell having high prb utilisation but pay load very less..what issue

[@OurTechPlanet]

High PRB and low payload can happen when user is in very bad radio coverage. In this case, MCS will be very low (QPSK) which will take lots of RBs. Moreover, the retransmissions will be high which will also take considerable amount of RB resources.

[@swarnban8634]

@@OurTechPlanet So uptilt or new site plan right?

[@OurTechPlanet]

@@swarnban8634 yes, correct.