RC BLOW OFF VALVE USING CO2! PSSHHHHHHH

[@mutation333]

I'm glad you're making your own BOV system. That's way more interesting to watch then you strapping a speaker to your RC with zip ties.

[@cutlerc2351]

The stu stu stu sound is actually called compressor surge and occurs when there is no blow off valve and the air comes back through the turbo.

[@damoncatlin734]

exactly and the long pshhhhhhh sound is from the blow off valve and stu stu stu is the absence of one

[@cutlerc2351]

TEC D3M0N yes a lot of people don’t know that

[@RandomStuffGarage619]

Explain why my s14 sounded like that with a BOV. it had a greddy type R on t518z turbo pushing 18 lbs of boost. Some BOV are tuned to do that so there is still SOME pressure left in the charge pipe so when you open throttle again you dont lag, spool response is much better.

[@cutlerc2351]

Christopher Rea either way, that sound is still caused by back pressure. Not the actual BOV

[@legros731]

@@cutlerc2351 hks sequential blow off valve do this stu stu stu sound

[@fluffyrob12693]

I love how far you’re going to fine tooth every realistic detail on these scale drift cars. You have truly thought of everything and you’re building it! Such an inspiration dude!

[@ericviger4984]

This kind of outside the box thinking is precisely why I love this hobby! Awesome work as always!🤘🤘

[@albertoperez5337]

First time watcher....THEN I SAW AN RC 240 THROWING FLAMES!!!! I'm a simple man really! SUBBED!!!!!!!

[@rcmaniac6743]

This is litterally the best rc channel ever, with the best builds too

[@GregVirgoe]

A solenoid valve would be quicker acting allow less gas out than that mechanical valve and more reliable. 👍🏼😃

[@Hellsong89]

True, but you would still need regulator between the canister and solenoid, cause there is around 850psi pressure inside in room temperature, but it limits pressure, so to get that amount flow, you would need larger diameter solenoid and bigger you go slower it is to open and shut. Its pretty hard to find 12v solenoid valve that can operate with that amount pressure and is light enough to be even considered to be put into RC car. Also price is another issue cause those aint cheap.

[@rdturboit4948]

Ye i like the seats... And i hope you can do the blowoff valve

[@corylong6504]

This amount of attention to detail is insane.

[@mikedamario1775]

I can't believe I found this on KZbin this is wild I love 1/10 scale customs because they are amazing machines that are great for upgrades whick you do very well I'm hooked off 2 mins I can't wait to watch and like more of your channel keep it going for us adults that like to do it big in small scale video quality amazing by the way voice sound and video

[@10thScaleGarage]

Yessssss. Long overdue but worth the wait.

[@javierm8013]

You could paint the co2 cartridges to look like a nitrous bottle or 3D print a sleeve to go around it. Great video as always man keep up the good work.

[@archiebradshaw6083]

Yo dude. I love the channel! I’m 33, and my father has been into RC since I was a baby. I’m pretty sure he still has his original RC-10 somewhere. Think u could do some sick mods to it? I’ll send it out if so. Keep rocking dude!!

[@_carefulcole_4517]

Really cool idea. Hope to see it come to life soon!

[@MachoMandem]

I see programming and vrrrrr tututu I subscribe!

[@bradorndoff4180]

You are one of the most creative rc enthusiasts out there and that's it... keep on creating new ideas! Hmm ricaro seats might fit in my traxxas stampede with the proline 50's chevy pickup body. HMMMMM lol

[@bennickerson9581]

Awesome Idea!

[@robdogboy78]

Glad to see you back, missed your ingenuity

[@ciscog570]

I just got into RC cars and thanks to your vids I'm definitely going to build a drifter all your stuffs baller .dope az cheers

[@rocketbunnyboy0323]

I've put a lot of my builds and mods on hold for a while now but after watching your vids again reminds me to get back at it

[@sidewaysdatsun8719]

Really like the idea of the separate motor for the engine sounds, might have to try something similar 🤘

[@THEDnARACER]

Your videos make me spend more money than I want to. Thanks

[@restomoduk8253]

Research and Development is my fav part

[@farisgumelar6914]

hi, this is my first time watching the kpopRC channel, I saw this channel on a recommendation, your channel is very entertaining and very funny, very nice to see it. I am a beginner in RC, it is very helpful with your KZbin channel, greetings from Indonesia.

[@sitbackdownpls]

The detail is insane man.

[@jbzone100]

Shreck is love shreck is life i pray you chose me for those pretty seats

[@burgell9940]

After watching the Adam lz s13 build that's what got me into build rc cars next project is a drift car already got a rally a drag and an off-roading car built

[@jynfu1481]

I think I'll be loving the practical sounds series. Will probably be using some... Maybe design my own if my 3d printer arrives.

[@RCDriftFl]

Just got a rhino max and those seats would be an awsome add to the build... love the lz 240

[@bentsound]

Good to see ScaleScience getting more representation!

[@bobspitts]

Put a fan in front of the stream of air but off to one side of the fan and it’ll give that stututu

[@Asapjones215]

Bro explained cars better than any car channel 😭🤣 ✋🏻🤚🏻🔥

[@danmagri]

Hey bro, send this Recaro to Brazil! This will make me to stay home and away from Covis-19 crawling on my backyard! 😉

[@jacksrccars347]

Fantastic idea!!! Awesome watching something being created from scratch like that 👍👍👍

[@AxlMetcalf]

2:44 I see you 🤘🏻

[@GINGERale420]

I just finished buying my first house as an adult and my fiancee already wants to build a desk for rc stuff, my crawler is a modified redcat gen7 sport with a new bright jeep body and it.would look sick.with a full scale interior

[@rustlerhustler33]

You are the man I love this channel your video inspire me to do more with my builds keep up the awesome work my friend ...stay safe

[@topraktankollu6390]

I just love your work man, it inspires me when I' m building my car. My only suggestion is that it would be really cool if you start a muscle car project series, because I' m building one (I need extra ideas) and there is a shortage of rc muscle cars on youtube. I would love to see some fresh ideas and builds.

[@SuperScale-dp7kv]

How about this for an idea?

[@topraktankollu6390]

@@SuperScale-dp7kv I have already noted it :)

[@sabastiangipson8163]

I really like this I did never thought about using it for an RC car though if you were going for like a drag car instead of a drift car this could make a very good nitrous purging system

[@kennycabazos1026]

That's some pretty awesome work! Some cool stuff to start having some original sounds from cars instead of speakers. Nice work!

[@kpopRC]

thanks bud! Much appreciated. the project came to a stand still when the valves i was using couldn't open due to too much pressure. I'll get back to it for sure.

[@8bitsamurai6]

Glad your still making vids. Wish I could of won that LZ 180

[@foxracerdrew]

Maybe you could find one of those tiny turbochargers that are like key chain sized, have it attached to a motor to turn it, have it dump into a container you want it to store the air for release, then you wouldn't need to worry about blowing off too much compressed air.

[@henrymca]

Great video as always and editing was onpoint

[@alfredorodriguez4539]

any link to see full video of the ae86 rc sound?

[@rongka272]

same here, search youtube with the key word in video, but cant find the channel or similar video.

[@alfredorodriguez4539]

@@rongka272 check this out instagram.com/p/BhVyM9IANNM/ or this facebook.com/watch/?v=1967719256591640&external_log_id=e73bf609b27ff18216bdf4b288729422&q=slowfreaksteam They´re both facebook and instagram of the group enjoy!!

[@kanjonate413]

Gotta love the new ideas that come to mind 😇😇😇

[@jensgeyselings5881]

when i think i see all of it. he comes with something new and nice.

[@closed2459]

If you make a cone for your air to pass threw for sound try adding some reeds to work like cards in kids bikespokes an you may also then come up with engine rummble/ rev.

[@dude213451]

You should 3d print a miniature Adam LZ for your scale drift cars! He would look awesome in those recaro’s!! I know they’d look good in my Enduro 😉

[@stevenfarmer1477]

Need ta call you the mad scientist 💯🤣 btw those seats would look awesome in the interior I'm tryin to make for my baja rey lol. Keep building and staybsafe 🤘

[@mykejustmyke1407]

Nice idea, can't wait to see it working bud

[@nicktag7649]

When you mentioned that it sounded like a nitrous purge, it is because it is the same pressure when it opens and when it closes. With a blow off valve the systems pressure is vastly less when it closes to when it opened. Making the noise drop. So, maybe you could open it fast and close it slowly.?? You could possibly charge (with compressed air) a small container/resivior and release the air out of that to get the desired surge?

[@reggienephew6753]

Your very talented buddy. Loved the blow off valve you designed

[@dazkillinger1397]

Im working on motor sound with a juice box. Ive made something close to a blow off valve. Working on testing sounds with a drill gun with a squared bolted end. You could make a lil simble connected to a servo or something but i would want the sound automaticly made if you ask me but idk. I like you work tho on all your vids i 3d print and cnc Cad rc prototypes as well. Good work.

[@SargentSkroonk]

Cool build! I think your build would work best as a Nitro purge. Paint it NOS and please your urge. 🤙

[@rogerhereijgers5983]

Looking cool those seats !! should have a smaller bottle of gas !!

[@Gertz]

Mighty Car Mods! :D they are EVERYWHERE

[@h.pepper6604]

So glad u didnt do the janky speaker set up. Keep the crazy awesome videos coming

[@eddieverdian4765]

Kpop I love your vids I’m a fan and I’m a car and rc car fan thank you for being on KZbin your the best rc KZbinr

[@martinsamson1832]

Can wait to see the final product , I love all your scale as sh#t builds.Keep up the good work from sunny Scotland 👍🏻

[@Papa7Bravo]

A way for a more realistic sound if you're able to, have it open the valve quick, but close it slower than it opens. That'll give you the Bov sound

[@SykoDj]

Your 20 min sketch up blow off valve sounds 🔥. Almost makes me want to go to pep boys and buy a nitrous kit with my stimulus check.

[@rcstarz5206]

Love this man keep up the great work brother man! RC STARZ are huge fans.

[@christophercastilaw3157]

That’s freaking badass bro!! Love your videos!

[@phill210]

I cannot wait to see how this turns out

[@north-coastrc8130]

Dude that’s sick once again leading the way with outstanding ideas

[@Jasonnmk6]

Subscribed! Now I need me some of those recaros! Super cool Definitely need to get a 3d printer!

[@ST2JZ]

Savage mini recaros 😁😁 Would match my actual recaro spg's in my competition drift car!

[@humblerc841]

Great video, I love the ideas!

[@Jimmy-nu7mr]

Yo I’ve been loving your videos man, super sick

[@kanedavis8797]

Seats !!!!! I really want to build my rc to spec and I just got a s2k body with the drop top seats would set the build off !!!

[@MiguelMartinez-xh4jt]

Damn you are really good at designing parts

[@RandomStuffGarage619]

Wow man where have you been?!?! Awesome return. And the milk bottle AE86 engine noise was spot on. I remember when that first showed up on youtube I wad like NO WAAAAAY! sounds so good. Unfortunately that NA and you are going FI route with BOV. Soooo... Yeah I'm eagerly anticipating how you tackle this, with optimism!

[@powcar91]

Maybe you can add a trumpet shape baffle. At the line where the air comes out. To get the sound of a blow off valve.

[@BeaudoinMotorsports]

Make a nitrous purge, that actually shoots smoke for Scale Drag Cars...

[@RandomStuffGarage619]

Get one of those timer release air sprayers in bathrooms. Actuate with a dedicated servo. PSSSSH!!! springtime fresh!

[@AkagiPro1]

Dope!!! Can’t wait to see the final product

[@joaquingeorge787]

love the engineering behind everything. new to the channel looking for scale inspiration!

[@zamoragera13]

Maybe using those small turbos that go on keychains. They might make the noise your looking for. Just a thought

[@MidCoast]

Let’s go! This looks very doable thanks for the vid.

[@ttcshop-774]

I just want THOSE seats for my "KPOPRC" Inspired build lol! So it's just that much more genuine!)

[@Theromanticrejeck]

Hoonigan just got a bunch of rc drift cars. You should send some there way.

[@MichaelDumpson]

I recommend your videos to LITERALLY EVERYONE lol

[@johnvalencia9264]

Bro I'm new to your channel and I immediately smash the subscribed button like a boost I love rc drifting and love your content

[@__vlow]

really enjoying your videos. you should build a 1/28 scale drift chassis with a 1/24 scale model kit body. look into it a bit

[@benchalke9048]

First time watching and will Watch again! Legend! Just been back through your vids and love them!

[@paulsebastian3987]

Great video , very well explained .

[@tylerm124]

You should have used a 3.5v solenoid valve its pops open and closed way faster and you could make the necessary circuit pretty small. I might get onto that.

[@joemello5274]

So how did the BOV sound and work? Thays a very interesting design following. Man your ideas are awesome

[@thomasgibson783]

Here's an idea , I think the servo might be too slow for your application , you might try to use an electric over air valve with that co2 cart , just need to make a tube with a spring loaded flap in it

[@mariolo1768]

Nice idea!! Love these seat‘s

[@rcboiz8943]

Bro, this thing is gonna be cool when its complete

[@kingnorlen]

Its a good day when theres a new kpopRC episode! :D

[@KTMcaptain]

Actually the blow off valve relieves intake pressure for when then exhaust turbine no longer has energy to continue force feeding it. Typically uses the vacuum generated from the throttle plate closing, but it’s to correct a pressure differential between the exhaust and intake wheels.

[@georgetacey4031]

A video on building a backfire kit would be great. I've been wanting to build one for the longest time

[@V843v3r]

Just so you know, the first clip that you played, it doesn't have a blowoff valve. That chirping sound is compressor surge.the sound of blowoff valve is a single "pushhhhhhhhhh~~~".

[@lord-REDACTED-]

Maybe something like the old baseball card in the spokes would make good engine sounds.

[@BrotherMalice1]

Only recently discovered your channel, some very impressive projects you have done there dude!

[@ceasarswain4530]

Man those 3D printed seeds would look awesome on top of my drone...lol real note print me some blue ones for my sti and maybe I will make a mini one

[@digmoe6463]

Dude I’ll take them seat those are legit af!

[@mirc9427]

Excited for more of your stu stu stus

[@chrisscott3039]

Hopefully u can pull this off good luck 👍

[@specops420]

lmao "dont want it to sound like a kid in back of bus with speaker" 03:30