Watching this video before sailing alone around the world
@kqed3 жыл бұрын
Good luck to you! What a fun adventure.
@Dillon-bl3dz3 жыл бұрын
Tell us if you encounter the kraken lol
@ScribbledRiddles3 жыл бұрын
Rip
@capt.Justin3 жыл бұрын
💀
@LMGunslinger3 жыл бұрын
Sounds rough. I imagine it'll get old after 30 days.
@joshsmit7796 жыл бұрын
The physics explanation was half baked. I want to know exactly what each part of the sailboat is doing in a free body diagram.
@dogzebra27083 жыл бұрын
You'll find everything you will ever need to know about sailing in the book Aero-hydrodynamics of Sailing : by Czesław Marchaj Very detailed about every aspect of the subject. With diagrams, illustrations and photographic images.
@latetron3 жыл бұрын
@@dogzebra2708 Do you know if there is any where to read it online for free?
@DrummerJacob3 жыл бұрын
@@latetron You're asking for a free book but you're not even willing to put in the effort to search for it? At some point you don't deserve knowledge if you're barely even willing to lift a finger for it.
@latetron3 жыл бұрын
@@DrummerJacob I respect that, I didn’t mean for it to come off in a lazy way, I have searched for it, I have a paper on it and I was simply wondering any free recommendations for books on the topic.
@Helvetseld2 жыл бұрын
@@DrummerJacob what a prickish response and a ridiculous thing to bite someone’s head off over. He IS searching for it. Asking people who might know where to find something is a very obvious and efficient way to sear h for something. Maybe someone has a link handily available, saving time and effort, and if not, there’s no harm done. Besides, the internet is supposed to be about sharing knowledge with others. Is knowledge only valid if you acquire it entirely by yourself?
@jose88eric11 жыл бұрын
Was produced in high definition "360" max...
@Orcinus19675 жыл бұрын
I will never choose to be with the physicists on a boat. They are too nitpicky about sail trim. Like comments about video quality, they suck the fun out of the whole experience.
@michal56425 жыл бұрын
@@Orcinus1967 ok boomer
@Orcinus19675 жыл бұрын
@@michal5642 Actually I was born in '67. That makes me Gen-X kiddo.
@michal56425 жыл бұрын
@@Orcinus1967 boomer doesn't refer to age. ever heard of le 30 year old boomer sipping on monster energy
@pebblenapkins5 жыл бұрын
@@Orcinus1967 "actually i was born in 67'" ok boomer
@extramurous10 жыл бұрын
Hard to take this seriously when the first thing they say is completely wrong. Square-rigged ships can most certainly sail into the wind. It's true that they can't lie as close to the wind as a fore-and-aft rigged ship, but they can tack.There's no way Magellan, Drake etc. could have made it around the world in ships that only sailed with the wind. Getting around Cape Horn from east to west is impossible if you can't sail your ship into the wind.
@ppplll00099910 жыл бұрын
I think the reason is , under the force of wind, a square shape sail would attain a small degree of FOIL FORM. The wind hitting the leading edge of the square sail would be decelerated along the sail & exit the sail at a lesser force, & hence creating a foil form, I think.
@agtUnknown6 жыл бұрын
Also, while square rig ships couldn't lie as close to the wind, not all ships of the day were square rigged. The premise that "modern" sail boats are an advancement from square rigged ships (and not an iteration on a configuration that has existed for centuries) shows they did almost no research on the subject.
@gurglejug6276 жыл бұрын
interestingly, there is a line called a prior/prier known across northern Europe (since at least the middle ages) and depicted in various forms that 'alters the foil shape' of the sail as it passes from the mid part of the 'bellow' of the sail to the mast and on to the deck to be serviced. There are variants such as high prier and low prier (though named in Old High German, Danish etc) that are used to alter the upper and lower parts of the sail body. They were depicted and named in Danish, Dutch and German ships, but are never depicted/named in any British ships (as far as I have found), though there is something similar known as a slab-line on some UK square rigged barges (Humber barge IIRC). As far as I know its use(s) has not yet been analysed. I suspect they may have been for tacking, but also could be used to spill wind in increments, or stall the sail totally, or just to reinforce the sail body. Something similar appears in carvings/etchings of Viking ships and other early ships. Anyone who knows anything about them... please let me know, I've been looking for more info on them for years.
@jimcameron98485 жыл бұрын
Gilbert Pilz, on day one of the zombie apocalypse I extend a hearty welcome to you and your village ... we could use someone with Magellan's good common sense!
@user-daviddog5 жыл бұрын
With all them sails something else is happening. One should be put in a wind tunnel.
@Mojo5228 жыл бұрын
I have 3 years of studies left then I'm buying a used sailboat and taken sometime off. For me it's the best thing in the world.
@stevenbryant47188 жыл бұрын
taken is past tense, study harder!
@Mojo5228 жыл бұрын
Steven Bryant Haven't you ever made a typo. Not sure why you need to be ignorant about it, web warrior.
@Audfile8 жыл бұрын
I'm buying a Hobie Mirage sailing kayak and going to spend my days off exploring and camping puget sound where I live. and night fishing!
@Mojo5228 жыл бұрын
Audfile that sounds wicked fun
@stevenbryant47188 жыл бұрын
Mojo522 I read what have written. I believe that if you take the time to read what I have written that it I can take the time to look at it also. Like the difference between then and than.... It isn't that hard!
@Raging.Geekazoid4 жыл бұрын
1:40 Lift from the sail is *_perpendicular_* to the wind. It tries to make the boat plow through the water across the wind, but the keel can only slice through the water edgewise. The water prevents the boat from drifting sideways by pushing on the side of the keel, and *_that_* force is partially upwind. 5:40 The force from the keel has no forward component. Only the sail pushes the boat forward. End: You need to explain torques and ballast, heeling and righting moments.
@cazek4456 жыл бұрын
Ok this will be a informative video! “Square rigged sailboats can only go one basic direction.” Nevermind.
@mamneo24 жыл бұрын
xD
@alb90224 жыл бұрын
@@mamneo2 xD
@whitedragon97314 жыл бұрын
@Ninja DIY xD
@buckeye23004 жыл бұрын
@A l xD
@lolmoq4 жыл бұрын
@@buckeye2300 xD
@flamedrag1810 жыл бұрын
it's simpler to just figure out a workable route and let the sail dictate the angle of approach, turn away from the wind until the sail starts catching and let the wind push/pull you along. always look to your sail for information, it'll tell you how it wants to work.
@drphosferrous2 жыл бұрын
hellsyeah, or point as high as you can till it starts to luff, then cinch the vang down, pull the sheet in a little, then fall off the wind a tiny bit. My shitty little boat will point hella high in a strong wind.
@wadepatton24337 жыл бұрын
And THIS my fellow sailors, is WHY we NEVER confuse facts with Television.
@JamesD29573 жыл бұрын
What does that mean?
@peterisawesomeplease3 жыл бұрын
@@JamesD2957 The video is an oversimplification to the point of being wrong.
@hiddenname72723 жыл бұрын
@J The fact that they act like ancient sailors didn't use physics lol. Uptacking and uplift were concepts old sailors knew well. Of course a carbon fiber boat weighing a few thousand pounds is not the same as a 1500 ton frigate.
@Vrig3 ай бұрын
@@peterisawesomeplease In what sense?
@peterisawesomeplease3 ай бұрын
@@Vrig See my reply to James. But in a nut shell both lift itself and turning lift from a sail into forward momentum are very difficult to explain without math. There isn't a great intuitive explanation of either that can be described in this short of a video.
@atharvavankundre49424 жыл бұрын
Informative video. Don’t be deterred by the negative comments. Worth a watch.
@wildblue215 жыл бұрын
Nice production. Not all pre-modern sailing ships were slow and could only be dragged along with the wind. Airfoil shaped sails and boats that can sail into the wind have existed since the middle ages. Even a square sail can move a ship in a vector 90 degrees to the wind. Most tall ships had special sails to move into the wind. Most long journeys follwed the trade winds, but if your ship can't be rowed, it has to sail into the wind at some point.
@Name-ot3xw Жыл бұрын
Lies, we all know sailboats sucked until it became an upper middle class hobby.
@julianorozco520111 ай бұрын
@@Name-ot3xwdude im just trying to live one piece
@Name-ot3xw11 ай бұрын
@@julianorozco5201 same here, but in Waterworld.
@maryeaarch9 ай бұрын
watching this while working on my architectural project that is inspired by how sailing boats capture wind to bring this flow into my concept, such an inspiring video.
@805gregg5 жыл бұрын
I learned to sail at 16 in San Diego, we stayed at a resort that had sailboats for rent, we went down and said we don't know how to sail, the guy renting the boats said it's simple, if you catch the wind and move forward, you are sailing, if your not moving, your not sailing, it's that simple, that was 55 years ago, nothing has changed
@dgonzz90 Жыл бұрын
Do you still sail? I live in San Diego and would love to learn a thing or two.
@leaf52167 жыл бұрын
2:12 Fluid Mechanics Laboratory aka F.M.L.
@Sugarsail110 жыл бұрын
a luffing sail and a stall on an airplane wing are not aerodynamically equivalent.
@TheDannyHamilton12 жыл бұрын
Note that a wing will also loose it's force vector perpendicular to the chord if the angle of attack is decreased too far, and when sailing a boat in any direction with a component into the wind, the sail is best used with the chord nearly parallel with the apparent wind. Increasing this angle will result in loss of laminar flow and reduced performance of the sail. So, yes, I think that makes them essentially the same (see hang-glider and PlaneSail).
@lucabaldoni89115 жыл бұрын
Daniel Bernoulli (1700 - 1782) was not Swiss as this lady says on the video...he was a Dutch-born scientist who studied in Italy and eventually settled in Switzerland. Just because it is best to know the truth.
@paulhsu29653 ай бұрын
The following production is produced in high definition. KZbin quality menu: 144/240/360p. Great content, brought here by 37th America Cup.
@sabresforthecup11 жыл бұрын
The two are closely related. The reason that the angle of attack causes lift to generate is that, by keeping the foil/wing/sail at an angle to the flow, you are in fact forcing the air to accelerate around the suction side (leeward side) of the foil, reducing the pressure on that side and sucking the foil in that direction. The angle of attack is essentially another means of controlling the shape of the air foil as seen by the air flow. Too large an angle = too much curvature = stall = drag.
@mattstacey75328 жыл бұрын
4:15 is an incorrect demonstration of Bernoulli's Law. Try hanging the paper vertically and blowing on it...it will not move in the direction of the blown air. Correctly analyzed, lift is caused by streamline curvature, which is not taken into account for by Bernoulli's equation, which only analyzes velocity and pressure gradients ALONG the streamline (from mouth to far end of paper), not PERPENDICULAR to it (from paper surface outward).
@stevenbryant47188 жыл бұрын
It did move in the direction of the blown wind for me, from the vertical. The paper will not move into compression on the blown side very much; and past a flat plane shape you are, as they mentioned correctly, are introducing a concave shape to the former low pressure side, thus equalising the system. Maybe you just don't blow as hard as you think! LOL Quote real evidence from a reliable source to counter me.
@henrymerrilees90667 жыл бұрын
You are right, it's actually the Conandă effect. (The same thing that makes ping pong balls float in hair dryers.)
@BrodyFoster-g1z Жыл бұрын
I've always been so fascinated on how sailing ship works!!. I've always been so fascinated on how sailing ship works!!.
@aidtry18210 жыл бұрын
I've always been so fascinated on how sailing ship works!!
@normofthenorth9 жыл бұрын
I'm disappointed by the fuzzy physics and the perpetuation of a series of myths kept alive by High School teachers who feel the need to oversimplify Bernoulli to explain lift. And total confusion between a sail that STALLS and a sail that LUFFS! They are not the same, they are essentially opposites. A sail presented to the wind at too close an angle becomes like a flag. That's call LUFFing. A sail presented to the wind at too great an angle loses the laminar flow of air around both sides (especially the "outside"), loses its lift, and STALLS. It's funny to see the "water tunnel" demonstration of High School Bernoulli, because it demonstrates that the simplified theory is nonsense! The simplified theory says that the two flows -- over the straight side and the curved side of the old-fashioned asymmetrical airfoil -- arrive at the trailing edge simultaneously, predicting the higher speed over the curved side. In real life -- and in the underwater demo in the video -- that doesn't happen. And in real life, symmetrical airfoils work just fine, thanks, and airplanes fly upside-down pretty well, too! Disappointing presentation of "science"! Fortunately, Newton's laws of motion facilitate a simple AND accurate explanation of lift, including symmetrical foils and inverted flight. Why not find some physicists who can talk about THAT on camera? And finally, the famous curved piece of paper has NO flow over its bottom side, so it only proves that there is a pressure drop with increased flow, not that we need asymmetrically curved wings to get airborne. Shame on KQED for this! Fortunately, the Internet has a number of accurate explanations of BOTH how airplines REALLY fly AND how sailboats sail. But not here.
@Observ45er9 жыл бұрын
Norm Rubin Norm, I agree it's quite weak and poor, but, hey! It's US TV after all. I'd be interested in a summary of how you use Newton. I've probably heard them all, so a summary of the salient phenomena is enough. Also, which internet sources *you* recommend. -- Cheers
@normofthenorth9 жыл бұрын
@109830174706736765037 US Public Broadcasting is often impressive. The only website I recall offhand that explains lift accurately is called something like How Airplanes REALLY Fly. But I have seen some that get lift right in the context of sailboats. There was a Q&A on one of the Q&A sites (Quora?) that asked something like "How could I explain upwind sailing to a scientifically literate friend?" A bunch of us responded and engaged in a useful discussion too. (That was my first introduction to the fact that a wind-turbine-driven-propeller boat can sail straight upwind!) The simple Newtonian explanation of lift involves his 2nd [sic: really 3rd!] Law of Motion: For every action there's an equal and opposite reaction. So, in order to push a sailboat forwards, the sails have to "throw" an equivalent amount of air backwards. Specifically (and way more complex than necessarily), the forward momentum (mv) imparted to the boat equals the net (resultant) momentum (mv) imparted to the air that's deflected "aft". And an airplane wing has to deflect enough air DOWN to hold the airplane UP. And a centerboard or keel has to deflect enough water to leeward (downwind) to hold the boat on track, pushing to windward (upwind). There is one semi-complex part of what a sail does, which invokes the Coanda effect. Basically, through that effect, a sail can not only deflect or "curve" the airflow that HITS the sail (on the INside of the sail's curvature), but it can also deflect or "curve" the airflow that MISSES the sail and curves around the OUTside of the curve. When the sail is too in-line with the wind, we first lose the force from the inside of the curve as the sail transforms into a flag. That's luffing. When the sail is too perpendicular to the wind, we first lose the force from deflecting the wind along the OUTside of the curve, because the Coanda effect has limits, and the wind will not curve around a sail that's perpendicular to the wind. That's stalling, and it happens similarly with airplane wings, keels, centerboards, and rudders. Both of those airflows leave the leach (TE) of the sail at a much more "aft" or "rearwards" angle than they come at the luff (LE) of the sail. The resultant of that change in direction is partly sideways (downwind) and partly forward, and the keel or centerboard resolves that force into an effective forward force, and a sideways force that's mostly converted to heel (tipping). The forward force is conceptually identical (to Newton) to the forward force we'd get from throwing sandbags overboard, over the back of the boat. Except instead of throwing sand aft, we're throwing air aft. The ratio of sideways force to forward force is not constant, but changes with the angle of the boat to the wind -- the Point of Sail. When cutting across the wind (Beam Reach), the sails are quite far out, so the sideways force is modest compared to the forward force. When we sail upwind, we do several things that create bad effects (more heel and slower speed), in return for being able to point higher, i.e., closer to the wind. It's a compromise, trying to maximize our Velocity Made Good to Windward. E.g., we have to use a flatter sail shape than the high-power shape we use on a reach, and we trim in tight, with the boom more-or-less on the centerline. None of that is fast, but it lets most boats sail at a decent speed around 45 degrees off the true wind, which we couldn't do without those adjustments. And when we sail that way, the sails are probably pushing us sideways around 10 times harder than they're pushing us forwards -- but it's worth it.
@Observ45er9 жыл бұрын
Norm Rubin OK Norm. US *Public* Broadcasting is ok, but it also talks to a more general audience. Wisconsin Public Radio does an even better job. ... Now, I appologize. You went much further after your Newton summary than I intended. I wasn't looking for sailing instructions. ... I was holding back the way I asked about your Newton explanation. I understand lift well, but wanted to see how you framed it. What you say is correct, but doesn't explain the pressure difference that causes the "lift" force in the first place, which, then causes the air to be "thrown" rearward. That explanation is sort of backwards --- or "If "A" always causes "B" and we can see "B" happening, then "A" *must* be happening even though we can't see or explain why it is happening". See what I mean? It says that since air is thrust rearward, there must be an equal and opposite force forward that is accompanying it, but doesn't explain what causes what (or even talks about the forward force in reality). This, "what" is, of cource, the pressure difference that actually is the "lift" force that is transferred to the mast and movers the boat --- not the reward moving air as you know. That version of the "Newton Explanation" is only half the complete story of "HOW". ... Your reference to Coanda is technically incorrect. Many mistakenly call the effect Coanda for normal airflow over the convex side of a sail/wing, but Coanda Effect is reserved for the narrowly defined effect seen by a high velocity jet, or sheet of air directed (forced) along one side of a curved surface (it is not defined [by Coanda himself] as any air moving past due to the ordinary motion of the surface through the air). The normal airflow around a moving sail or wing is not the Coanda Effect proper, although it obviously occurs for similar reasons. This is a common misconception, though I admit perhaps a bit of a nit to pick. ... BTW it's Newton's THIRD Law (equal and opposite) that you refer to. ... The web site posted in another comment www.real-world-physics-problems.com/physics-of-sailing.html is excelent at describing all the sailboat forces, though it glosses over the fine detail of the cause of the pressure differences resulting in lift. That's ok with me. The vast majority of discussions/disagreements about what causes lift is only among amateurs... I also have my own set of authoritative on-line sources and wanted to see if you have any others. -- Cheers, ScienceAdvisorSteve www.challengerillinois.org/
@normofthenorth9 жыл бұрын
Observ45er Sorry if I went too far, but maybe it'll be useful for somebody else. You had a much longer response here, then deleted most of it? In that response, you attributed all the lift effect (and presumably the heeling effect, too) to the difference in pressure between the two sides of the sail. I've read that people who've measured those pressures found them significantly inadequate to explain the lift that's experienced -- e.g., the pressure difference between top and bottom of a plane's wing wouldn't suffice to keep the plane in the air. I haven't worked hard to reconcile every conflicting statement, and I've also taken "the Coanda effect" on faith.
@Observ45er9 жыл бұрын
Norm Rubin Hi Norm, The 61 lines I see is what I posted. There was a glitch and I re posted it, then deleted a short portion that was the error. ... I understand and I see you have fallen prey to the many amateur discussions. No, the pressure difference on the wing or sail *IS* the lift and causes the heel. Think carefully about it. In air (or any fluid) the only thing you have at your disposal to create a force is the fluid itself and the only way to get a force is by pressure differences. This must be understood first. There can be no other cause for forces (except for more detail when explaining just how that pressure difference comes about). ... People (pros) who have actually MEASURED the pressures have proved this is lift. People who tried to CALCULATE the pressure difference using long-standing bad assumptions got the wrong answer. This proved their assumptions were in error, not the correct concept of lift. ... What Bernoulli revealed to us is that in a classical flow, say along a pipe (where no energy is either added or extracted), there is a relationship between velocity and pressure. This is easily understood if you realize that a higher pressure region will push (accelerate) fluid toward a lower pressure region. Fast air doesn't create the lower pressure; it is being pushed toward it by a higher pressure elsewhere. ... Bernoulli's EQUATION only applies in a single stream, called a streamline. He revealed that as a bit of air moves along A PATH, pressure differences ALONG THAT PATH affect its speed (velocity) IN THAT PATH as you would expect. ... The error comes when you extend that to the two DIFFERENT paths AND also assume that the air on both sides of the foil arrive at the trailing edge at the same time (the equal transit-time theory). Using those two incorrect assumptions gives the wrong result -- EVEN THOUGH there are videos on-line showing this method today! Sigh! Two wrong assumptions don't make a right. In addition, the wing is indeed doing work on the fluid and, therefore adding energy...bad assumption abound. ... *IF* you use the Bernoulli concepts correctly in CALCULATIONS you do get the correct result, but the math is complex and completely unnecessary for understanding the phenomena happening. ... For sail boats, this is a darn good reference, though it doesn't get into the nitty-gritty of how pressures are changed: www.real-world-physics-problems.com/physics-of-sailing.html ... . If you want authoritative sources, try any one, or all of these for a good understanding. While each author will emphasize different things or use slightly different ways to describe some things, the basic story is the same: ... An example of someone who started by doing his homework: Peter Eastwell - teacher www.scienceeducationreview.com/open_access/eastwell-bernoulli.pdf ... Weltner in PDF - "Misinterpretations of Bernoulli's Law": user.uni-frankfurt.de/~weltner/Misinterpretations%20of%20Bernoullis%20Law%202011%20internet.pdf Weltner as a web page: www-stud.rbi.informatik.uni-frankfurt.de/~plass/MIS/mis6.html ... Anderson & Eberhardt AAPT paper: The Newtonian Description of Lift of a Wing-Revised 2009: home.comcast.net/~clipper-108/Lift_AAPT.pdf ... NASA Glenn Research Center. This is a series of pages you move through: www.grc.nasa.gov/WWW/k-12/airplane/wrong1.html ... Or, AllStar is another good source: www.allstar.fiu.edu/aero/airflylvl3.htm ... If you prefer videos... Video lecture explaining the Bernoulli Principle. If you understand Newton, you'll clearly understand Bernoiulli after this video. Dr Holger Babinsky, Cambridge University Engineering Department kzbin.info/www/bejne/jojHf3h9p5pmfdk His missing slides HERE (Click the Download Icon for the complete set of slides): docs.google.com/file/d/0B0JABuFvb_G_MkpBZHJmRGo3UkU/edit?usp=sharing This is the 2003 article he mentions in the video: www3.eng.cam.ac.uk/outreach/Project-resources/Senior-glider/howwingswork.pdf ... Doug McLean Boeing Technical Fellow, retired; gets rather esoteric later in the video, but starts simply for the most part. (I've talked with him): Common Misconceptions in Aerodynamics. kzbin.info/www/bejne/h3ymfGeif7GEfrc For the "Newton" part of lift, watch the result of the pressure difference, in the GREEN VIDEO: ... amasci.com/wing/lasrWing.gif Quite impressive! For the setup used to get that green video, watch part this 2 of 5 from 10:20 to 12:59 kzbin.info/www/bejne/fl7UqqWnrdp7ars ... David Bentley Australian Air Force Cadets: 219sqn.aafc.org.au/Flight/Principles%20of%20Flight%20-%20web.pdf Dave Bentley shows slowing of upper air & other misconseptions: 219sqn.aafc.org.au/Flight/Simple%20Aerodynamics-How%20planes%20fly.pdf Dave Bentley Wings Don't Suck 219sqn.aafc.org.au/Flight/Wings%20don't%20suck-How%20planes%20really%20fly.pdf -- Cheers, ScienceAdvisorSteve www.challengerillinois.org/
@bethells868 жыл бұрын
Best analogy about how a boat sails when wind is forward of the beam is "squeezing the seed". The person in this video did mention this, not many know this, most think its only the lift, like aeroplane wings that move the boat.
@fidan2fast8 жыл бұрын
+bethells86 but small sport sail boats have large keels, but what about large sail ships with square sails? how do they keep balance and move forward? ...a stupid question because I'm lazy to do some research
@bethells868 жыл бұрын
The web has made many lazy :) Watch a movie called idiocracy, shows what happens to human race in a few decades from now, all dumbed down, its all part of A21 :) All sailing boats use same principles to sail, Older ones would have used lots of ballast instead of deep keels.
@johnnydragon972 ай бұрын
"the following KQED production was produced in high definition" - upload the video in 360p.
@Entreprenoob4 жыл бұрын
8:50 "A sailor ... doesn't really need to understand the detailed physics" Just 2 Chads out sailing on their boat with absolute disregard for physics like a total Chad
@blacktootherson3 ай бұрын
Average sailor W
@ACAhmann9 жыл бұрын
The emphasis that that's how "modern" sailing works is a bit stupid. Fore-and-aft rigs have been around for hundreds of years. Old vessels, even square riggers, could be fast and sail upwind. Replica tall ships have been know to outrun modern yachts fairly often.
@ACAhmann9 жыл бұрын
***** I'm sorry but you're relying on trite misconceptions. I've been on a square rigger making headway upwind many dozens of times. Not as much headway as something fore-and-aft rigged but it's enough to make it upwind. The quoted number is about 66 degrees off the wind, but a good tops'l schooner or virginia-built brig or hermaphrodite brig (or something of the sort) could probably make more like 50-55 degrees if well-handled. The hulls on most of these vessels were deep enough to provide plenty of resistance to leeway. A squares'l will create an aerofoil, but not as efficiently as a fore-and-aft sail cut for the purpose of creating an efficient aerofoil. If you want verifiable examples of tall ships outrunning modern yachts, Pride of Baltimore I outran several racing yachts the first time she went out according to the crew that was onboard. It's very easy to believe given her hull, rig, and size if you're familiar with sailing vessels. The crew in the documentary Pride: Legacy of the Baltimore Clipper talk about that briefly. Another example is HMS Rose sailing into Boston shortly after her construction. That's mentioned in detail in an article written for a publication of the San Diego maritime museum written by her designer who was on board at the time. You''re welcome to go find it if you like, that's the verifiable stuff that comes to mind. But it's quite easy to see how an authentic replica of a fast sailing tall ship like a Baltimore clipper can outrun a modern yacht in many conditions. Vessels like this were very sharp with massively powerful hulls and huge rigs. They're also over twice the size of your average modern sailing yacht. Add a decent breeze and you can outstrip an average yacht, even an average racing yacht, in a variety of conditions, especially when you have stronger breezes and rougher seas which favor bigger heavier boats. This stops applying, of course, with hardcore racing yachts like volvo 70s or anything that's on foils. This is coming from a student of naval architecture who races yachts inshore and offshore and an experienced tall ship sailor.
@ACAhmann9 жыл бұрын
And I should mention, no need to distinguish between modern sailing and historic sailing in that context. On a fore-and-aft rigged vessel from 2015 (excluding solid wing sails) the sails still work literally exactly the same as the sails on a fore-and-aft rigged vessel from 1890. Or 1800. The only thing that's changed is the equipment, material, and the loss of the gaff in some cases. Again, I'm experienced sailing modern and traditional craft.
@superpoluha19 жыл бұрын
ACAhmann r u high
@ACAhmann9 жыл бұрын
+Tommy "Johny" Wiseau What, can't read more than four sentences? Words too long? I can give you a dumbed down version if you're interested.
@jolllyroger19 жыл бұрын
+GrandOldPuba lol obviously you know nothing of sailing and sailing ships ..... generally a modern sail boats main sail can be let out to approximately 45 degrees give or take a few.... a square rigger can generally turn it's sails 45 degrees give or take .... now back when the Nina pinta and Santa Maria came to America those had round tub like hulls and we're literally some of the worst ships available. ..... viking ships were long canoe like ships with square sails in posting here a link to viking replica square sailers and if you have ender addled you will know that these are sailing up wind ... yes they are beating into the wind and are capable of what a fore aft rig is. .... just imagine a Lug Sail..... it's square and it can point into the wind. .... any good sailor knows how to point with any rig.....
@USMCArchAngel035 жыл бұрын
Nice thing about videos like this is they're still current no matter when you watch them!
@dumbcat10 жыл бұрын
I was confused as to why a keel would generate lift, but I think I understand now. The keel typically has a teardrop shape but the shape is symmetrical and the keel does not *seem* to be upturned into the oncoming water like an airplane wing needs to be. You have to have one or other. Either you have to have an asymmetrical wing so that fluid travels faster over one surface, or you have to upturn the wing. A keel leans in the water but its leading edge is not upturned. However, the reason the keel does generate lateral lift is due to the 'angle of attack' of the boat. A sailboat does not travel 'head on' through the water. It travels at a slightly skewed angle off center (think moving forward while the hull is turned slightly to port or starboard). It's this skewing that 'upturns' the keel wing and causes lift.
@decidiousrex9 жыл бұрын
No. Not really. But it's not you misunderstanding, it's that their description of the keel is very misleading. A keel's purpose is less to generate force and more to ensure unidirectional movement. Think of it this way, go grab a credit card, driver's license, library card, etc, and fill up a sink with water. Slide the card through it so that the skinny part is "cutting" through the water. Moves pretty easy right? Now try to move it side-to-side. Doesn't work so well. It takes a much greater force to do it. That's the principle of a keel. It doesn't *add* another vector, it simply cancels out anything but the desired one so that the only motion is in the forward/backward direction. Without a keel a sailboat would still go forward, only you will notice the boat will also shift and hop sideways, which is bad for navigation and the boat and also is incredibly dangerous.
@dumbcat9 жыл бұрын
decidiousrex Keels, dagger boards and centerboards actually do generate lift. But I agree that the lift they generate is fairly insignificant and their main purpose is to stop the boat from sliding laterally. I've sailed dagger board boats without the dagger board. It can be a bit squirrely but it's still doable.
@decidiousrex9 жыл бұрын
Hans Zarkov Well, of course based on their design they might, but they don't need to. I'm sure there's benefits to it, but generally any design which would incorporate lift will inevitably have some degree of drag, which in water is BAD. Very bad. Hence most keels are as thin and simple as possible.
@dumbcat9 жыл бұрын
decidiousrex Nearly all keels, dagger boards and centerboards do generate lateral lift, not because they have exotic designs but because a sailboat's hull travels though the water at a slight angle off center. See: Physics of Sailing www.real-world-physics-problems.com/physics-of-sailing.html
@decidiousrex9 жыл бұрын
Hans Zarkov Yeah, I guess it's a kind of weird thing to call lift, though yes it technically is, but it's still just the keel resisting sideways motion.
@SportZone77805 жыл бұрын
I came in confused about Sailing and left even more confused. Bad video.
@votpavel4 жыл бұрын
same
@counciousstream4 жыл бұрын
Seemed pretty clear to me. Then again I had 2 semesters of physics and one of fluid dynamics.
@4crabs_in_a_person_suit9 жыл бұрын
Haven't seen it in the comments yet, but square riggers were NOT parachutes. Using the braces, they caught the wind just like the Bermuda rig. The ship was "square rigged" to build a much larger virtual wing. SV Peking's mast stood 170 feet. It wouldn't be until the advent of carbon fiber that triangular masts would approach that size.
@lexm94165 жыл бұрын
This is still a good description of the physics behind sailing, irrespective if the ‘into the wind’ debate.
@rontober461124 күн бұрын
Thank you. Send me more about sails and boat design.
@rajgill75765 жыл бұрын
So many people with sailing experience are griping about the specifics of what this video said. Get the hell out of here you clearly know how to sail. For a laymen like me, who has no idea how a boat can sail upwind, this was sufficient. I learned a thing or 2
@smittywerbenjagermanjensen10515 жыл бұрын
They're saying that the techniques listed are wrong, meaning you're learning incorrect information, are you stupid?
@rajgill75765 жыл бұрын
@@smittywerbenjagermanjensen1051 im not in the interest of learning about square sail ships so the controversy is beyond my interest
@bryanjackson89173 жыл бұрын
Standard keels are typically symmetric. That is, both sides have the exact same curved shape. As long as the keel is moving parallel to the flow of the water, the forces generated on each side will cancel each other out, and the keel will keep the boat moving in a straight direction. So with even and equal water flow across both sides of the keel, no net lift force is generated. It is only when the water is flowing across the keel at an angle that the keel can generate lift. At that point, what the keel will try to do is correct the boat to move back into a straight line direction. This is the exact same principle used by weather vanes to always point in the direction the wind is blowing. But if the keel can generate lift, it can then cause the boat to move faster through the water than it otherwise would. So by using the sail as a wing and keeping the boat angled so that the keel is not just moving straight through the water but is moving at an angle and thus generating lift, more speed can be generated than just the sail alone would provide. By the way, Polynesians and Micronesians were using wing shaped sails centuries before Westerners ever came up with the idea. In fact, when Europeans first ventured into the Pacific (starting in the 16th century) in their square rigged sailing ships that could only travel downwind, they were amazed at the speed and maneuverability of the sailing vessels of the Pacific islanders they encountered. However, the sailing vessels of the Pacific islanders had no keels. So how did they prevent the boat from being pushed sideways by the wind? In the case of the Micronesians, they relied on the shape of the hulls - which were shaped like wings - and outriggers to counteract the sideways movement of the boat caused by the wind. The Polynesians typically had a double hulled design (that is, they were catamarans) which had the same effect.
@Aviato163 жыл бұрын
Westerners had the lateen as far back as the romans so while you are correct that the Pacific Islanders had them long before Europeans, it was not the first time Europeans had seen sail boats that could travel against the wind.
@JD-kf2ki3 жыл бұрын
Everything in this Universe has its own laws (physics, maths, etc.). Those laws run the Universe beautifully, and those laws didn't even have to evolve either. They were born the moment Big Bang happened. I refuse to believe this Universe just happened by accident. Man! Everything is perfectly engineered down to Planck level.
@EA_customersupport5 ай бұрын
Laws are just explanation of how things exist/happen in this universe. It's not that everything in the universe obeys the laws
@Badz_B34chst4r2 жыл бұрын
Shouldn't the force of keel be perpendicular to the boat (or slightly aftward) at 5:44 ?
@rasmusmller62512 жыл бұрын
Thanks for a great video, that I enjoyed a lot. About lift: it is due to the air(and water) viscosity. Whatever foils/sails you put in the flow of a superfluid with zero-viscosity will NOT generate lift. But air and water are not superfluids, so they obey The Kutta-Joukowsky condition: when the flowing air/water leaves the sharp trailing edge of a foil, it will continue flowing in the direction of that sharp edge instead of making a sharp turn around it (like a true superfluid would).
@cwk141710 жыл бұрын
1:52 I was dying that that jib sheet wasn't being pulled!
@truthteller258010 жыл бұрын
Me, too! :)
@Ben-xc4jc7 жыл бұрын
OMG IK
@bekithomson4 жыл бұрын
@mrpinks It's pretty clear that they haven't sailed before. Thanks for the sexist remark.
@jakobmiller80204 жыл бұрын
😂😂😂
@blacktootherson3 ай бұрын
Lmaooo fr
@typhvam51078 жыл бұрын
Correct me if I'm wrong, but I'm quite sure sailing against the wind with triangular sails is nothing new, been used for Millenia. Viking ships, and several mediterranian ones used those principles, albeit without a keel so I'm not entirely sure how those particular sails worked, but they did not work like the square sails where its merely pushed by the wind. Also those square sails are needed in such huge ships, you cant quite easily correct weight by shifting passengers in a boat of that size.
@G1NZOU8 жыл бұрын
Large sailing ships had a large amount of ballast in their lowest deck, acting the same as a yacht's keel. Square sails do in fact work fine for going to windward, they're just a little less efficient at it than a small sailing yacht with Bermuda rig.
@sergioistomin73928 жыл бұрын
You MUST have a keel to sail upwind. So those triangular sails didn't do any good (regarding sailing upwind) and in principle the same as square sails.
@erikanderson46057 жыл бұрын
Vikings didnt use triangular sails, however in the mediterainian these did exist. Also vikings have been around for (a) millenia.
@skimbalshanks7 жыл бұрын
You don't have to have a keel to sail upwind, you just need a hull where the submerged part is capable of inducing the water to flow around it rathher than under it, ie. any reasonably deep hull.
@gurglejug6276 жыл бұрын
not so - a boat itself acts as a resistance to lateral movement in water and therefore is per-se a keel. However a deeper or heavier keel, dutch boards etc etc makes the keel effect more efficient.
@jamesmoylan28617 жыл бұрын
take a landsurfer,the wheels stop the thing from sliding sideways as a boat does without a keel? The wheels do not generate lift?
@wilfdarr5 жыл бұрын
... Not sure it's called as such, but it's very comparable: when too much side force is present they "stall" much the same way, and you can "re-attach flow" by turning your wheels to match the direction and/or speed of the "flow". Driving on dirt /gravel /icy roads this is an important concept to understand.
@carlos17507778 жыл бұрын
Gonna go and practice this activity... looks fun . Thank you.
@counciousstream4 жыл бұрын
I was already familiar with sailing when one of my physics professors explained that a triangle sail when properly set "sucks" a boat forward as air moves across the sail and creates lower pressure on the outside of the curve not unlike the wing of an aircraft pulls an aircraft from the ground with lower pressure on the top of the wing. We all knew that he was talking about pressure differential but apparently liked using the pull or suck analogy.
@davidrodgersNJ10 ай бұрын
For anyone out there who doesn't know, the old sailing ships they show in the video were NOT only able to sail in the direction of the wind.
@Why_are_you006 жыл бұрын
Remember that time when wind was like, "Bruh, the ships changed. Guess we gotta change the way we work too."
@accountnew64747 жыл бұрын
I don't understand this... he said at 3:34 that the place where it was curved and where the color accelerated it created a "lower pressure". If the pressure is there lower, the object would normally move towards that point instead of being lifted away from that point. Am I missing something here?
@accountnew64747 жыл бұрын
hahah omg he actually said it 5 seconds after that hahah but they are simply horrible at explaining things! Typical American physicist. So here is the thing, sail is this cloth thing material on the mast. Mast is like this metal dick on the ship. Okay? so far so good... Wind blows into sail from a 45% angle (NOT HORIZONTALLY NOT VERTICALL), then sail is curved on one side. Why is it curved? Well YOU MAKE IT. You tie the center of it on the side of the ship so it is curved! On that side air has to travel longer distance, okay, it is curved okay? >>>>> Air moves faster >>> pressure falls on that side >>> on the other side pressure is high>>> ship moves to the side with lower pressure (side where sail is curved). Keel is this thing you have in the water... it makes the ship go forward and not completely to that side so yeah. Mkay? Okay...
@lorrinbarth19697 жыл бұрын
Being a sailor I'd very much love to delve into the detailed physics of sailing. I watched this video and didn't learn anything.
@JackNikam074 жыл бұрын
yes
@BrassLock2 жыл бұрын
This video wasn't pitched towards people incapable of learning anything from it, as you so clearly described your inability. It's designed more for the open minded person such as myself, who is ready to embrace such information contained therein. Perhaps you should ask someone to explain some of the basics of sailing to you. It's unusual for a sailor to admit their inability in this regard, but there you go.
@alchemy12 жыл бұрын
Why does the air/liquid accelerates going around the curve surface? The reason given thus far is that it needs to catch up with the flow on the other side. Why? By the way when you blow on one side of the paper, the paper doesn't have to be curved to move across the direction of the flowing air. A flat piece of paper will do. A curved paper first wants to straighten out.
@JohnWilsonSD10 жыл бұрын
"A luffing sail is not the equivalent of stall on an aircraft", per minute 7:40, it would be an over-trimmed sail.
@tiscsailing721110 жыл бұрын
And when I criticize an over-trimmed sail, I say it is STALLing (because it is). As John Wilson says, it is most definitely NOT LUFFing, quite the opposite. That statement is just embarrassing.
@monkvickers8363 жыл бұрын
Right, that would exceed the critical angle of attack of the foil, detach the laminar flow of air, and cause the telltails to spin.
@stevenbryant47188 жыл бұрын
The big Clipper ships held oceanic route records from the mid 1800's until the 1990's. Much of the speed was born of the hull designs, very much ballast balanced by as much sail as they could put up. They also plied the trade winds and ocean streams as much as possible. The ships often paid for their construction after a one way trip, like to S.F., Cal. Sometimes they were even broken up for their valuable lumber. This preferable to losing the ships to Teredo worms. This was inevitable as copper plating wasn't mounted on the bottom of the hulls to save money, speed construction, keep the cargo weight high and keep the the hull speed high. If someone reads a script that is pertaining to a subject that they don't know well, is it fair to ridicule the orator? It depends on how well they were paid!
@patrickwatrin5093 Жыл бұрын
For me it depends on if they are trying to pass it off as if they actually do know and understand what they are reading
@trisailor33189 жыл бұрын
Sailing into the wind can be demonstrated with a slippery wedge on a table top. No elaborate lift theory necessary. And my first sailboat had a "keel" (a daggerboard) made of a sheet of plywood. No lift there either. A 12 year old can learn to sail very efficiently without knowing anything about fluid dynamics or even physics. Sailing is fun and pretty easy (Though winning races is not). Just start on a very small boat so that you can instantly feel the effects of your adjustments and you'll have loads of fun while learning.
@Observ45er9 жыл бұрын
trisailor33 Yup. There are good analogies and the wedge is one. As the NASA guys said in the video, the sailor doesn't need the physics detail (just as a airplane pilot doesn't). You only need the practical knowledge of how to trim the boat, but some folks like tha kind of detail stuff....And BTW, a flat plate does generate lift. That's how paper, or small balsa toy airplanes fly. We fly them just fine with no thought of physics. The problem is that the rtur physics has some detail that takes more to explain and many don't care about that detail. Unfortunately, many who *do* try their best to explain it with a limited background in the physics don't get it correct. The true detailed physics of a flat plate is actually the same basic phenomenon as any other wing, sail, daggerboard, or keel....that is, the *true physics* not the common misconceptions. ...Even if you have the wrong understanding of the physics you can still sail (and fly) well knowing the practical stuff.
@SamDandashli9 жыл бұрын
This video is helpful. My understanding of sailing is much better now .Thankyou.
@666zerowolf9 жыл бұрын
+Sam Dandashli still look confused to me, sam.
@TheDannyHamilton12 жыл бұрын
A wing can be tilted and not stall until it reaches its critical angle of attack. Beyond this angle it still has lift, but the lift falls off quickly. The same is true of a sail. The useful component of the thrust vector increases as the sail angle of attack increases. Eventually the sail moves beyond it's critical angle, and the useful thrust vector falls off quickly (the sail stalls). Sailors refer to this as "luffing" rather than "stalling".
@TheSailingChannel4 жыл бұрын
Please release in HD.
@frpboy25623 жыл бұрын
One day am going to be a pirate. I want to learn to sail a boat, this is great for me
@EdwardJamesKenway...3 жыл бұрын
Hahaha
@frpboy25623 жыл бұрын
@@EdwardJamesKenway... For Real bro no joke
@Moayad563 жыл бұрын
@@frpboy2562 gonna sail with the going merry or thousand sunny?
@frpboy25623 жыл бұрын
@@Moayad56 I like sunny but no I'll get a new boat
@guruprasad40897 жыл бұрын
Wow!! Its like Re-Visiting "Principles of Bernulli" - Governing the dynamics of fluid movements. Here, Explaining the physics behind the world of Sailing! I should say - A Very nicely illustrated video piece - As compared to any of the boring lecturers speeches/ the books on college library shelf racks! Reflecting on the new times. Well I call it "An Era Of Real Thought Sharing"!! Thanks for sharing.
@odenshiddentreasure27173 жыл бұрын
⚠️awesome informational video great job⚠️
@axr-pe9di8 жыл бұрын
I think it would be more helpful if there were diagram showing wind direction and airflow around the sail. Thanks for the effort.
@Odileytorres8 жыл бұрын
There is, its called points of sail
@RayRoponggi8 жыл бұрын
Black Ninja149 cf
@tkjazzer3 жыл бұрын
So where do I learn about "circulation flow field," "viscosity theory," and "starting vortices?" (On KZbin) . 8m05s
@permanenceinchange23263 жыл бұрын
I think you're exaggerating a bit... but yes, this explanation is very shallow, if not on some points even inaccurate.
@kiquito11 жыл бұрын
I always thought that if I were to travel back thru time, this would be one of the most valuable bits of knowledge to have.
@tonyinfinity10 жыл бұрын
Ya this and the next weeks lotto numbers
@tarklot10 жыл бұрын
Or how to make penicillin
@SIDEKICKONYOUTUBE6 жыл бұрын
1:34 is confusing. he said the boat can also go into the wind but then says except for directly into the wind.
@adriatic123 Жыл бұрын
Very informative, thanks. I always wanted to understand how is it possible to sail in all directions despite the wind going in one direction.
@alee3146 Жыл бұрын
You cannot actually sail directly in ALL directions. When sailing a course into the wind you must use tactics of tacking to indirectly advance toward the wind source.
@TheDannyHamilton12 жыл бұрын
Yep, another mistake on my part, and some confusion because the word stall seems to carry different meaning between the two objects. On a wing, "lift" generally refers to the force opposite gravity, and stall refers to the reduction in this force vector. On a sail, the force that is often associated with "lift" refers to the force perpendicular to the chord, and stall refers to the reduction thereof. Even when vertical, a wing still provides a force vector perpendicular to the chord.
@BrianPalmerEDU11 жыл бұрын
actually, if your sails are balanced well, you can sail upwind with the rudder unattended. That's how fast racers inch ahead of the competition... you can literally steer the boat with fine trimming changes.
@RemoPeter3 жыл бұрын
What is the water current is opposite to the wind?
@alainbellemare21687 ай бұрын
Being an ex pilot this is very clear explanation
@marteung4 жыл бұрын
Tganks for explaining. They’re actually complex concepts.
@pickcicle4 жыл бұрын
Not really that hard pence you get used to it.
@TeleTubeee16 жыл бұрын
I missed the original broadcast. Thanks for posting this show. Doug Oakland, CA
@666zerowolf9 жыл бұрын
blowing over the top of a sheet of paper lifted it up...good demo.
@JoeStampf6 жыл бұрын
What do you think is the strongest wind the kaytak can handle? Gusts up to 12-14mph today, not sure if I want to risk it...
@saraleahsands438911 жыл бұрын
When you blow on that piece of paper, does the Coanda effect help create that lift ?
@richardtarr976710 жыл бұрын
No. It's the Bernoulli principle
@sergiomesquitarocha80184 жыл бұрын
7:40 wrong. Stall in case of an airplane, yes. But not a flagged sail in a sailboat. Rather, the sail would be filled, but from a more perpendicular angle, which is less efficient for speed.
@robertbrandywine4 жыл бұрын
How could it be filled if the wind was flowing parallel to it?
@LawatheMEid7 жыл бұрын
5:48 the vertical component (on the path line) of both forces (on keel and sails) not the component of force on sails with the path line, the force on keel has on component that canceled with the component of sails force.
@animatem10 жыл бұрын
Anyone ever notice the "models" in these videos never use a "wing" shape that is only a few millimeters in thickness from front to back like real sails? These demos use sails that are apparently made of cloth several feet thick on the luff. The models also show the wing directly facing the wind, instead of properly trimmed. The sail would be luffing horribly if it was trimmed like this video shows. SERIOUSLY, watch this video again at 3:26 seconds. The wind would push the sail cloth flat from front to back since it is only sail cloth! There would be nothing to hold the curved shape against the forward wind.
@SuburbAllied10 жыл бұрын
7:47 watch the two sailboats and the motorboat, above the sailboat with the red sail - almost a bonus clip with a sail disaster, and a lesion by itself; How to NOT maneuver a boat in crowded situations.
@superpoluha19 жыл бұрын
SuburbAllied was likely a race committee motor boat, a start line, and boats starting. when there's racing, boats easily come within a foot of one another.
@SuburbAllied9 жыл бұрын
Gregory Simmons yea, thats probably it
@paulbonge66172 жыл бұрын
I would comment as a life long Square Rig sailor and Master of Sail, that square sail rigged vessels DID NOT just get pushed by the wind. The China Clippers, the epitome of the class, could point between 35-40 degrees off the wind, and square sails operate in the same manner as fore and aft sails as the weather edge of the sail it stretched tightly down to the yard below and angled so the wind passes along its surface from side to side but UNLIKE fore and aft sails ONLY, square sails also have a downward wind flow also causing LIFT. The big cargo square riggers of the late 19th and early 20th centuries were massive but NOT SLOW as you implied. These ships could reach speeds of 20 plus knots or about 23 miles an hour.
@simon40434 жыл бұрын
Both my son's are aerospace engineers and state that Bernoulli's phenomenon plays only a small part in generating lift A helicopter blade rotating at speed will generate almost no lift until the angle of attack is altered to displace air downwards Only then will the helicopter lift off Sails do not have a flat windward surface. The distance travelled by the leeward and windward air streams is virtually identical (in fact often longer on the windward side) It has been clearly shown that airstream velocity is the same on both sides of a sail Sails work by displacement of air, not by the Bernoulli phenomenon
@kqed4 жыл бұрын
Interesting! Thanks for sharing your research.
@flamedrag1811 жыл бұрын
they could, but they didn't understand it fully until bernoulli figured out why it happens, then it made it a lot simpler to travel against the wind. it lead to different sail types being preferred when traveling in a particular direction, instead of having to follow trade winds, they could instead measure what angle they needed to travel to get to a destination and get the most out of the sails and the wind with that particular angle.
@TheDannyHamilton12 жыл бұрын
"The lift produced by a keel adds to, not balances, the turning moment of the wind" : Yep, I'll agree, I made a mistake on this one. The lift created by the keel does not balance the turning moment created by the "lift" produced by the sail. The resistance to heel is due to it's mass. I'm pretty sure there is a force vector on the keel that resists sideways movement of the boat, but I'm at a loss at the moment as to the common name for this force.
@RacinJason3 жыл бұрын
Taking my 1st sailing lesson today and wanted a head start😁
@TheDannyHamilton12 жыл бұрын
If you are comparing vectors relative to fuselage/hull, then you will absolutely find different results, the plane is using the force on the wing to oppose gravity, while the boat uses the force on the sail for propulsion, so the position of the wing/sail relative to the vehicle is significantly different. I agree that a boat doesn't work like a plane, but a sail does work a lot like a wing. Figure your forces about the chord of the wing/sail. Also see here: watch?v=ELL5lTE9Tek
@storybored9728 жыл бұрын
I live near the water in Florida. While watching sloops, I notice that when one sail in play, some favor the jib, others the mainsail, often in the same conditions. Why?
@donaldmerrell93708 жыл бұрын
+storybored The mainsail will try to push the stern around whereas the jib does not. Kind of like rear wheel drive vs front wheel drive.
@Orcinus19675 жыл бұрын
It could have something to do with the shape and size of the keel, and if the sail is over powered by the wind. Shallow draft, fin keel, wide boats can be overpowered when wind speed rises on the main sail. This tends to push the ass of the boat around. You can adjust by reefing the main sail (making it smaller) but sometimes that is difficult and or people are lazy, or expect the wind to decrease, so they don't bother. Somtimes people only have one size foresail or jib, which may be appropriate for the amount of wind, or not. This could unbalance the boat and make steering difficult as well. So...depending on hull / keel configuration, available sails, competency of crew, point of sail / course and wind direction and velocity, one might decide to dump a sail in order not to have to keep fighting the helm.
@jtkarlsson197311 жыл бұрын
I don't think it was the sail technology that was the major limiting factor in holding ships back from sailing upwind. They had jibs and spankers even on the old ships. It was rather the heavy, bulky hulls that created the limitation: too much water-resistance going forward compared to the side-ways resistance. Also, the sail area per weight was much higher (and weight translates to more forward water resistance).
@Galbex213 жыл бұрын
As a pilot student knowing about this completely blew mi mind. Its so clever. I had no idea sail boats could do this.
@bradyspace5 жыл бұрын
Sailboats work without keels, and so do sail karts for that matter, so this video is already confused. Better analogy is your hand riding the wind outside the open window of a moving car just like you did as a kid. Tilt it up and feel how fast your hand shoots up at that angle. That angle of attack is what sailboats take, shooting them forward as fast as your hand shoots up. You can trim the shape of your hand and its angle of attack for differant results. Your hand is not a wing shape and doesn't need to be. What's important is that the leverage your arm gives from you sitting firmly inside the car, against the wind is what the boat the boat needs from its base wedged in the water. The boat and sails leverage the wind against the water. If the sailboat was not wedged into that flow of the water, then the whole thing wouldn't work. Without the water it would be like your hat flying of your head in a convertible or a kite without a string.
@GodzillaGoesGaga5 жыл бұрын
Sailing vessels without a keel work by sailing on an edge (akin to a snowboard). This is what provides to opposing vector. And this is how windsurf boards work AFAIK. They are correct about a keel providing the opposing vector. A yacht without a keel will be incredibly inefficient and can easily be overcome. A fin is a form of keel btw.
@WarBeer12 жыл бұрын
Being new to sailing....I assume that the way the sail function changes with the way it needs to preform? When you're hauling...the sail acts more like a "wing"....where as when you're running it's acting more like a drag chute? And then on a reach...somewhere in between? Is this correct?
@ErikB6054 жыл бұрын
The wind is attacking from the side. The sail curves that wind backwards creating a forwardforce on the boat.
@yzScott3 жыл бұрын
At 7:45 not "luffing" a stalled sail is over-trimmed. Luffing is under-trimmed.
@au51emu5 жыл бұрын
It was produced in high definition but you can't see it.
@marcosmoriyama403 Жыл бұрын
With all due respect, there is a scientific error in the explanation of the keel and rudder part, as per the end of the text immediately below. . The starting point to understand how it is possible for a sailboat to sail against the wind is to understand how an airplane sustains itself (by Bernoulli's Principle and by action and reaction) and how an F1 "sticks" to the ground (essentially by action and reaction, and not by Bernoulli). . When an airplane is cruising and flying completely horizontal, it is lifted almost exclusively by Bernoulli: the difference in geometry at the top and bottom of the wings creates lift. This force is perpendicular to the motion of the plane, and drag (drag, or air resistance) is minimal. . As a curiosity, the aerodynamic drag of an Airbus A380 in cruise, for example, is 0.0265 (against 0.001 of a laminar fluid on a plate, and 0.005 of a turbulent fluid on a plate); even so, it consumes a huge amount of fuel, something like an average of 5 liters per second in a flight. . An airplane can also fly based on action and reaction; the most obvious example is that of a paper airplane, whose wings are straight and could not be supported by Bernoulli. In its flight, however, its beak must be slightly tilted upwards, so that the air enters underneath and sustains it. The main characteristic of a flight by action and reaction is the high drag: a study with two types of paper airplanes showed that they have a drag coefficient between 0.8 ("Stunt Plane") and 1 (" The Glider"). . Note that even an airplane like the A380 will face enormous drag both in the climb and in the descent, due to the air that enters either below or above and will tend to brake it. . Another situation in which there will be enormous fuel consumption is if it were to fly upside down: in this case it would be like a paper airplane, and its beak, in order to sustain itself, must be kept slightly tilted upwards. . To close this part, an F1 car "sticks" to the ground due to the forces generated by the wings (two front and one rear), which are basically inverted wedges: the airfoils of an F1 do not work like an inverted wing of an airplane ( they perhaps more closely resemble the elevators of this one). They are just wedges in which the natural downforce is generated at the cost of drag (this is sometimes positive, because it helps the car to brake. It can contribute up to 1g of braking), that is, based exclusively on the principle of action and reaction. . As a consequence, the drag coefficient of an F1 is very high, reaching values as high as 1.1! A driver once commented that driving an F1 is like trying to accelerate a car with an open parachute behind it. . . Having made this introduction, it became much easier to understand how a sailboat sails against the wind. That experiment where you blow on the side of a sheet of paper and it rises, almost like magic, is a clear demonstration of Bernoulli's Principle! Due to the greater air velocity in the upper part of the paper, there is a lower pressure (to understand, imagine a hose connected to a faucet, and this one is open: with the faucet open, but the nozzle of the hose locked, the force against the walls is huge, but when we unlock the nozzle and the water acquires enormous speed it may be that, even with a hole in the hose, it does not leak through it, but continues to flow), and with that the leaf rises! . Note that blowing in one direction generated a lift force, in a perpendicular direction, which is amazing! . Returning to the sailboat, it cannot face the wind head-on and walk against it in this situation, but it can be placed on its side, in such a position that the wind generates lift in the sails from the difference in inclination of its material (the sail is with a more rounded side, like an airplane wing); note that one of the components of lift is in the opposite direction to the force of the winds (and will obviously have a much lower intensity than this one) and the other in a perpendicular direction to this one (also lower intensity). The tendency is for the sailboat to walk inclined in the direction of the wind (for example, either northwest or northeast, if we are talking about a north-south wind), that is, going sideways. . And here comes the mistake. . In a common boat, not a sailboat, the rudder is largely responsible for steering it (the helm changes the position of the rudder). On a sailboat, it also serves to counterbalance the force to one side generated by the sails, but this does not occur as an "inverted lift", or the same lift in the perpendicular but to the other side; in other words, they say that the Bernoulli Principle is at work there, when it is not. What happens inside the water is just action and reaction (that is, something more similar to the wings of an F1, and not to those of a cruising plane): if the boat tends, for example, to the northeast, just turn the rudder to the left, so that the course is corrected, so that the sailboat has the final tendency to walk into the wind. . As we are not talking about an active force, that is, in the end, it is the wind that is setting the tone (note: I am ignoring possible sea currents and proximity to surf zones), the tendency is that, even with the rudder positioned in such a way as to counterbalance the force of the sail in the opposite direction, it will still be displaced in an inclined manner, either to the northwest or to the northeast (in the case of a north-south wind), however the solution is simple: after a while, just invert the position the sails, as well as the rudder, so that the vessel zigzags around the main straight path into the wind.
@OCEANCRAFTSMotionGallery4 жыл бұрын
Awesome content. Thank you for sharing it.
@dandcc91929 жыл бұрын
I'm kind of baffled by the intro, "before there were airplanes, before there were trains, there were sailboats." I mean, yeah, it is not wrong, but why not "before there were internal combustion ships, before there were steamboats?" This is like saying, "before there were pencils, before there were teapots, there were shoes." Yeah, you are not wrong, but I still question your thought process.
@666zerowolf9 жыл бұрын
+Dan DCC91 ...your dealing with nasanazi...like talking to a group of bankers about baseball.
@LiarraSniffles_X39 жыл бұрын
+Dan DCC91 It's related more than your examples because they were all mass transit methods.
@666zerowolf9 жыл бұрын
The candle was right for 1840...the rocket engine was right for 1970...we need to move on to nuclear or electro magnetic...the metal ships might not work in high radiation areas....the human race will never leave Earth with the current NASANAZI administration...they are anachronisms!
@dandcc91929 жыл бұрын
John Rogan what the hell are you talking about?
@LiarraSniffles_X39 жыл бұрын
Dan DCC91 I straight up blocked them; they are some old crazy american dude going on about NASA-NAZI's. No clue what he is on.
@ArgusBrown11 жыл бұрын
There lift generated by the keel is mostly perpendicular to the keel however with proper fairing you can move that lift forward. The "airfoil" is not as efficient as a wing since the surface is symmetrical. So what you have is a bit of stalling towards the trailing edge of the keel but you still get lift.
@BrentODell12 жыл бұрын
So what DOES make the paper lift, if not a drop in pressure?
@zggtf21110 жыл бұрын
"produced in high definition" only plays in 360p
@aion21774 жыл бұрын
thank you. as somebody which never sailed, this seems counter intuitive at first :)
@richardbedard12457 жыл бұрын
You may not have to know physics to sail but the more I know about how and why things do what they do the better prepared I feel.
@Bloomio95 Жыл бұрын
So i´ve heard two explanations for the lift. One is with pressure, the other one with the change of direction of the wind. So in truth, is it both, or just one of them? To me it seems like the change of direction would produce more force.
@DrummerJacob3 жыл бұрын
2 minutes of information spread throughout 9+ mins.