Kral Arms Puncher Breaker Silent

[@sohotmusic1]

Yes! I've been waiting FOREVER for an US review of this gun. Great job as always.

[@airgunangie17]

Tyler, Tyler, Tyler!! The Predator GTO's shoot awesome in just about anything!! If I had only one pellet I could use for all my airguns, for accuracy those are going to be at the top of my list! They're hauling ass and they're accurate, they may be more of a pass through projectile, rather than a damage causing expansive pellet but as far as accuracy! They've got it in many air rifles! Really enjoyed this video, I just got this gun going to shoot it for the first time in a few! Thanks for all the great info!!

[@ssevikeroutdoors7706]

Nice gun! I have Kral Puncher Pro Silent .22, beautiful wood stock, good balance, nice to shoot. It shoots best jsb 18. 13 grains, loves it when I sort it. With 330 cc tank 50 shots average 860 fps.

[@derrickmitchell39dm]

UPDATE: PA is awesome, they sent me, little old me, some stickers. These guys are the best and I'd advise any and everyone to buy from them. Thank you so much PA.😀😁😊☺

[@derrickmitchell39dm]

I just purchased the .25 from PA and should get it this Thursday. I'm looking forward to shooting it and learning its characteristics. I like that PA included 2 tins of pellets, a scope and mounts. I can't complain at all and I'm very satisfied with my order. Thank you PA, you guys rock.

[@nismo8319]

Just got mine today. I have the same scope laying around that you had mounted. Not sure how you could see through it. Scope sat way too low for me. Had to order high rings. Won't be able to test until the new rings come in. I have to say, my initial impressions after seeing it, it looks like a quality piece. Feels great in the hand and is well balanced.

[@SHOOTER3258]

Finaly a review in english!!

[@MrChris-bx7ss]

SI !!!!!

[@albertchavez2693]

we we :)

[@PhysicsViolator]

I have it with an acog , super accurate!

[@drekceldude]

Looks like the Breaker as potential but my concern is its sound level,just wondering what options are available to quieten it down a touch.

[@retepeyahaled2961]

I have mine now for a year. Serious quality issues. The cocking lever started opening after every shot. Kral fixed it for 40 euro; it was bent, they blamed it on me cocking too hard. Look it up on interent, it just is a very common quality issue. There is even another factory that makes better levers for the Kral! Next problem: the trigger hammer will break over time because it is not hardened. Oh yes, almost forgot to tell that it jams quite often. And it leaks air now. Better add 60 euro and buy a Hatsan Bullboss. It has more power, feels more balanced in your hands and is much more robust.

[@jjssnb3790]

Awsum job can you put a Donnyfl on that gun

[@bryanmorgan8940]

Great review Tyler! I'd like to see a review on the Karl N-11 in .25.

[@latifawan77]

Nice review and beautiful gun I like it

[@ricardoito1852]

Good review, but I think You should not grab any gun by the scope. Cheers

[@yeeyee3yeeyee3.12]

I plan on buying this gun good review

[@derrickmitchell39dm]

I bought it and when the scope is zeroed in it stacks pellets our to 40 yards out. I plan on letting troy of annilator tune it so it'll shoot 900 fps using heavy slugs.

[@TexasAirGunner]

doing the unboxing video tomorrow. just arrived today...

[@tylerpatner6591]

Nice! Look forward to seeing what you think.

[@AirGhandi]

really cool review! best regards from germany! :-)

[@malikje3312]

So nicc of gun i like it

[@22lr_plinking]

does anyone know where i can buy a single shot tray for my kral puncher breaker .25cal

[@yojomojo6262]

Vinny C Try a company called 'Rowan engineering' based in the UK.

[@phantomshtter]

Wait wait wait... you say the rail is aluminum and another channel says it's polymer. Which one is it?

[@derrickmitchell39dm]

Mine was manufactured in 2019 and its aluminum.

[@rickrazz7136]

Tyler, which mounts did you use with your UTG scope?

[@leehay9323]

Would it be too much to ask for a review of the .25 cal?

[@abelasencio9643]

Which is quieter, benjamin marauder or kral puncher breaker?

[@jpbventure6976]

benjamin marauder, the kral puncher breaker doesnt have baffles but can easily put a 1/2 unf moderator if you remove the shroud

[@younismengal5777]

sir is it regulated gun if it is non regulated gun so how they not make fps spread curve graph ??????

[@MrTUBER408]

I purchased the synthetic stock model in .25 cal. You said that a male quick connect would be included. I did not receive a quick connect adapter. I can not attach my hand pump to fill the air tank on the gun!

[@pyramydair]

Hello Don. Can you please reply back with your order number? Thank you.

[@MrTUBER408]

The order #6560618, Delivery #PIC000171682, sales #SON00183749. The gun arrived Friday afternoon 8/25/2017. Thank you for your speedy response. Don Fish Jr.

[@pyramydair]

Hey Don, we check a few Krals and they all come from the factory with a 1/8" BSPP fill probe. No Male Quick Connect. do you remember who you talked to?

[@MrTUBER408]

I watched this video. On the table were 2 magazine, 1 fill probe, 1 male adapter, 1 single shot tray, one 2 1/2" picatinny rail, 1 long allen wrench. Tyler demonstrated how the flow probe plugged in and then he said, "we are going to be putting on a quick disconnect, a little male, on there". I didn't pay close attention to what else was said. I thought he was saying that you were furnishing the male adapter with the fill probe. I misunderstood what he was saying. The presentation was a bit confusing. The adapter being laid out on the table with the rest of the accessories was what led me to assume that it came with the gun.

[@psnwpestsnipernorthwest2196]

is this gun available in left hand , or the side lever able to be changed to the other side?

[@tylerpatner6591]

The lever cannot be swapped. No lefty version that I know of at this time.

[@psnwpestsnipernorthwest2196]

thanks. guess I won't be ordering this one.

[@tylerpatner6591]

Take a look at the full length rifles (Puncher Mega). Same features, but the stocks are ambidextrous. The bolts cannot be swapped, but at least the stock will work for you.

[@aliverrett6904]

Which one would you prefer, the .22 or the .25 cal. i trying to order one today but torn between the two

[@tylerpatner6591]

Personally, I like the .22 better in this platform, the .25 is a bit under powered for my liking. That said, if you need a few extra FPE and want the larger wound channel (if you're a hunter) then the .25 would be a good choice. I've shot both, accuracy is comparable between the two.

[@tylerpatner6591]

I've seen a few discussed on the forums. At this point, with the number that have gone out, the few that I have been made aware of are not concerning from a numbers perspective. You have to anticipate returns, it's unavoidable, but the more important part is tracking the reasons they come back and how the manufacturer address any consistent issues that may arise. Crosman, Umarex, Gamo, Hatsan, Evanix....all of them have had their share of returns, it's par for the course. If we see anything consistent in terms of issues pop up on models, you can rest assured that it will be addressed directly with Kral. Just the same as we do with most of the manufacturers that we sell. I can only speak for myself, but I've shot at least one caliber of every Kral PCP model we have to this point and have not experienced any issues like I've read about on the forums. But for the price point, it does not surprise me that there have been a few that have had problems...that would be the case regardless of the manufacturer. Doesn't change my opinion though that Kral is offering a hell of a product at the price point.

[@joshturner9766]

.177

[@ricardo7743]

is there a option to use a after market silencer,is there threads at the end of the barrel,sounds like its not so silent if left standard.

[@aliverrett6904]

pyramydair yes it is threaded, i own two, .25 and .22 both are threaded

[@pyramydair]

The USA versions that we sell are un-threaded. The silencer is fixed to comply with US Laws.

[@aliverrett6904]

Lol ok if you say so. I beg do differ. But i do understand that you have to comply with the law

[@beckemeyer1]

pyramydair mines threaded I I love the states bought if from the states and shoot it in the states. Oh I got it from you guys too lol

[@beckemeyer1]

The piece that aligns the shroud unthreads

[@stevenmills8269]

How would you rate the Kral Puncher against the Hatsan Bullboss?

[@edwardmarcot5984]

I have both. I loved the BREAKER initially until it got some miles on it and first the cocking broke in two followed shortly by the valve stem doing the same. The Bullboss is heavier but it's built like a tank. I'm an old fart & the weight is so well distributed it's not a problem. I bet my grandkids will be shooting it for years to come long after I leave the planet. Mine's a .25. Very accurate! Love it! I picked it up directly from hatsanusa.com refurbished for $485 delivered to my door. Not a mark on it! 46-48 fpe out of the box and they actually have customer service!

[@edwardmarcot5984]

uhh, that'd be cocking LEVER.

[@huynhngoctran2483]

I am Vietnamese. and i am very passionate about your pcp line. so can i buy it and bring it here. Hope you are interested in this comment of mine. thank you

[@Monkeydad1969]

Not bad, T. Lighten the trigger and I think those flyers will go away.

[@tylerpatner6591]

Thx, Joe. Played with it a bit after the video was done just to see how light it would go. Got it around 1 lbs which was very nice and made shooting it a bit easier.

[@MrFergal90]

does it shoot straight though in 177

[@rs666sathan666pk]

This one or Gamo Urban PCP?

[@tandtoutdoors5154]

I need a recommendation for an extra high set of scope rings. I am using a 4×12×40 hawke vantage and it sits too low.

[@pyramydair]

This one with the 1" tube? www.pyramydair.com/s/a/Hawke_Sport_Optics_Vantage_4_12x40_AO_Rifle_Scope_Mil_Dot_Reticle_1_4_MOA_1_Mono_Tube/6580

[@pyramydair]

These are as high as we have for Weaver/Picatinny and a 1" tube. www.pyramydair.com/s/a/UTG_1_Max_Strength_Quick_Lock_Rings_High_Weaver_Picatinny_4_Hex_Screws_Per_Ring_Cap_See_thru/3852

[@philliplitchfield9390]

Do you ship to the UK?.

[@SNATCHYDBS]

Both are very decent mate... i hsve the Kral but the Gamo is just as good... 👍

[@rolandomartinez9299]

Why do you say we have a brass insert if it comes like that smh??!????

[@TheZombieburner]

God, the silencer on this thing clearly isn't doing it's job. That's probably the only real flaw, It shouldn't be that noisy, honestly. Is that meter reading the report of the gun only, or both the gun and the impact of the pellet?

[@tylerpatner6591]

It is gun only and yes, the gun on the high power setting is a little louder than we hoped. But there have been a few folks already that have figured out a few ways to mitigate that. Check out the GTA forums for more info.

[@TheZombieburner]

Tyler Patner Wow, that is loud. Although I guess this is their first real attempt so..... Ah, not surprised, Those GTA boys are real smart, they helped me fix a problem with a gun I had once, real nice folks. I'll probably stick with buying my coyote, cheaper and regulated.

[@roskaroska9804]

TheZombieburner

[@brannonwhite3036]

What options does a “lefty” like me have?

[@brannonwhite3036]

Also, at what decibel level is a pcp air rifle considered “silent?”

[@simonnoble7589]

Brannon White I think in this review, it means it come with a silencer

[@simonnoble7589]

Iam a lefty, as well . I can shoot these .

[@technicalexpert7659]

It's price plzzz

[@Modernwomensociety]

great gun but mine came with a bent cocking lever. thats the only piece thats made out of some kinda cheap metal

[@edwardmarcot5984]

Roger that. Most call that premium material "pot metal". Geeze, you beat me. Mine took awhile to start bending. THEN they BREAK. And I'm sincerely sorry to tell you but the valve stems are junk as well. It usually takes a while but that will eventually BREAK.

[@Fazman81]

Man Im glad Im I read this. Ill be going with the Hatsan Bullboss in .25 cal instead.

[@TexasAirGunner]

seriously. right after i say im about to put out a video on this gun because there arent any. they post this. come on...

[@nandt6565]

So this gun seems to be pretty loud do they offer baffles for the dead space in the shroud?

[@tylerpatner6591]

They do not, although if you read the forums, some of the guys are experimenting with Benjamin Marauder baffles. If you're willing to sacrifice a little length, it looks like you can actually take the shroud and flip it, so that there is much more dead space in front of the muzzle than what is currently there.

[@nandt6565]

I ordered one and it will be here today so I was going to experiment with it and try to make my own baffles for it.

[@aliverrett6904]

Nathaniel Bidet did you find a way to quite it down a bit. i have the. 22 marine and its kinda loud

[@nandt6565]

Yes I found this website marmotmilitia.com. The gentleman that owns the website makes baffles. I sent him the measurements so he will be making them and should be sending them out once I pay for the order.

[@nandt6565]

So I sent Jim at marmotmilitia.com/ pictures and measurements for the krals shroud and he made some killer baffles for it and they work great!

[@Bacanalable]

Put the video in 0.75 speed for understand what he says...

[@josesanchex4771]

Cuanto cuesta

[@waltershumate5777]

Go along and awkward Barrel sweep is taken care of by that Bullpup design, I find the bolt and the safety in akward and totally unacceptable positions. For me, that trade-off is too much to ask in a hunting rifle.

[@masheercatchers3010]

Sir slipped to this pincode 791122 0.177 call

[@richardjones2811]

That's shockingly bad. Just don't expect good from cheap!