This is an abbreviated install video of the Amazon Krator fairing. I don’t have a camera or a tripod, so I do apologize I couldn’t include everything. But I tried to capture as much as I could and include all the main points.
Пікірлер: 38
@mooseknuckle585614 күн бұрын
You must of got a good one. My hardware is so cheap that one bracket is already stripped out from the factory. Returning it and just going to free ball for the time being haha
@Fever_Rides14 күн бұрын
Damn, that sucks. It’s hard to avoid nowadays.
@adrianalcala9158 Жыл бұрын
that looks bad ass I love it I'm buying it!
@gamekilla4283 Жыл бұрын
Hey brother you put the fork clamp brackets on backwards. I have the same one and there’s a pic in the instructions indicating correct direction. That’s prolly why your headlight fitment is off. They also state that it could damage your tank that way. I’d include a pic of the instructions to show but not sure how to do that on these comments
@Fever_Rides Жыл бұрын
Thanks, I appreciate the comment. I’ll give it a look this weekend. Tank clearance is definitely tight. But there is some adjustment in the mounting points on those clamps.
@Fever_Rides Жыл бұрын
I checked out those brackets, and they’re on correctly. If I switch them, they’ll stick out farther forward by a solid 2”. I did make some adjustments though, and I think it’s better aligned now.
@stephendominguez448 Жыл бұрын
I installed the exact fairing on my 23 softail standard lastnight. The instructions do show the bracket install opposite from the way you did it. That being said, the headlight extension block is to narrow for the headlight bracket so Iinstalled the fairing without the extension block. Now my headlight is way back in the fairing. I had a thought that if I reversed the brackets I wouldn't need the light extension block. Your video proved that thought as correct. As far as the fairing being too close to the tank, as long as it can be adjusted to not hit the tank, I don't see a problem. Now i just have to decide if I'm going to reverse my brackets, order the correct light extension block, or just get some bushings for the extension block I have.
@Fever_Rides Жыл бұрын
@@stephendominguez448 something is definitely off about those instructions. But flipping the headlight bracket really put the headlight in a good spot for me. All I did was remove that guide pin. Thanks for watching! Good luck getting it all finished up
@Bajadave760 Жыл бұрын
I just got the same one and the quick release locks won’t snap and lock it in place.
@Fever_Rides Жыл бұрын
Are you talking about the bracket that’s mounted to the fairing, hooking into the clamps that are mounted to the forks?
@Socaloverlander11 ай бұрын
Mine either . They keep popping out without any force
@Fever_Rides11 ай бұрын
@@Socaloverlander i had to wiggle mine a bit to get them to lock in place, but once they did they stayed
@gtomczak215ii Жыл бұрын
how is the view for the windscreen? i was thinking of getting clear but i like the tinted look.
@Fever_Rides Жыл бұрын
For me, the view is perfect. I look over it by about two inches. I’m 6’3. My wife is 5’5 and she looks through the top. But if she stretches her back upward, she can see over the top. I hope that helps
@olivieraustin76513 ай бұрын
What is it? Saddlebags
@Fever_Rides3 ай бұрын
Yes, Saddlebags
@davidsprague1601Ай бұрын
will this one work on a 2023 softail standard i believe there the same
@Fever_RidesАй бұрын
Yes, it will work on the standard.
@davidsprague1601Ай бұрын
@@Fever_Rides i got mine today and it didnt come with the quick disconnect just the regular but ill keep it anyway
@Fever_RidesАй бұрын
@@davidsprague1601that stinks, the quick release was a nice option. But it might be sturdier without it
@davidsprague1601Ай бұрын
@@Fever_Rides i thought i ordered it with the quick disconnect but i dont really plan on taking it off anyway it was a pain to get lined up tho
@thomasrarick82604 ай бұрын
Do you have a link to this fairing?
@Fever_Rides4 ай бұрын
I sure do. Thanks! Krator Motorcycle Windshield... www.amazon.com/dp/B0BV8CNV1C?ref=ppx_pop_mob_ap_share
@ranierotravaglini8382 Жыл бұрын
Honestly I regret having spent the $$$ on the Memphis shade. The windshield doesn’t flush with the fairing and it creates a very annoying whistle. The bottom of the fairing is not finished like the Amazon but instead it has a really cheap plastic. I like to support American companies too but in this case it was not worth it. I am pissed. I may just buy the amazon and do a video comparison
@Fever_Rides Жыл бұрын
I appreciate the comment. I had a Memphis Shades on an LRS, and knowing what I know now, I’m happy with the Krator.
@tylerdzugan959610 ай бұрын
How is the wind buffeting with this?
@Fever_Rides10 ай бұрын
I don’t get any buffeting below 70. Above 70 though, I start to get some. It doesn’t bother me for the first hour.
@PillowheadRides10 ай бұрын
did it come with the clamps?
@Fever_Rides10 ай бұрын
Yes, the clamps came with whole kit
@85santafe Жыл бұрын
I bought 15 inches and it's too tall because I'm looking through the glass. The glass distorts the image. I can't drive like this. I'm 166 cm tall. Is it not too tall for you?
@Fever_Rides Жыл бұрын
Thanks for the comment. The screen is perfect for me, I look just over it. I am 6’2, or roughly 188 cm tall. I can see how looking through the glass would be an issue though. I have never owned a windscreen that I looked through.
@85santafe Жыл бұрын
@@Fever_Rides thanks
@BlackFlagAdventure7 ай бұрын
Mine didn’t come with the quick detach hardware 👎
@Fever_Rides6 ай бұрын
That’s weird, sorry to hear that. The quick release is a nice feature
@BlackFlagAdventure6 ай бұрын
@@Fever_Rides for sure, I wonder if I just have to buy it from Memphis shades
@Fever_Rides6 ай бұрын
@@BlackFlagAdventure I also had a MS fairing on a previous bike. The mounting hardware appeared identical
@jacobnance24 Жыл бұрын
can you link fairing?
@Fever_Rides Жыл бұрын
Sorry man, I need to figure out notifications. I just happened across your comment. It says it’s unavailable right now, but you should be able to look in their store. Maybe they just updated something. www.amazon.com/dp/B0BV8CNV1C?psc=1&ref=ppx_yo2ov_dt_b_product_details