Kreg Accu-Cut and Rip-Cut Reviews

[@charleslatham5861]

I've only made a few cuts with my Accu-cut but did rip a full sheet of plywood in half! When I reached the end of the track I took the saw off flipped the track around put it back on the plywood. Put the saw back on the track where I left off and kept going! Works great trimming doors! Just lay the track Alon your marks. Very little set up time.

[@rebeltoharriganjr6158]

I would like to say, I bought a delta table saw for 199.99 at the depot, but I must agree that a table saw can't cross cut a full sheet of plywood.

[@kcwizard72]

Thank you for being the first person to reveal that it will not work with my Mag77!! I had been wanting to get this...until now...ugh.

[@rvduck96]

Great review. I have both of these and absolutely love them. The accuracy is spot on. I have the track clamps and really like them. If you have a warped sheet of plywood, they hold the track in place with no chance of moving . I do have a good table saw that I will use for smaller pieces but for a full sheet I find the Kreg Accu-cut and Accu-rip so much easier and so much safer.

[@Sulkanator]

Excellent review, John. Incredibly helpful to me as I have been trying to decide whether or not to get these two items and use my Dewalt circular saw OR get the Kreg system which has a saw built for their tracks. That route is much more expensive and heck, I already have the circular saw to put to use.

[@otismohammed5555]

instaBlaster.

[@SawdustmakerLori]

Great tutorial.......thank you!!! I just got both and am anxious to start using them!

[@user-bz8vn3gm8r]

I bought the EZSmart Track Saw System before kreg came out with this for around 2x the price and thought to myself i could have saved some cash by going with kreg. But after seeing how the kreg system works, I am much happier with my purchase of the EZSmart track. The clamps and the saw base attachment are much better and you can add additional tracks if you want to cut a 4x8 sheet into two 2x8 sections.

[@DaCake2]

I think the Kreg makes an XL version now with additional tracks.

[@alphaanjandutta]

Thanks for the tip - this does not work with worm drive saws (side winders are ok). I confirmed this by calling Kreg as well.

[@JayBrekken]

Great explanation. Thanks for answering all the questions I had about these products!

[@CriticalThinker1967]

Very handy video and I’m definitely getting them both. I lost half a thumb to a table saw kick back and don’t like using it anymore except with a cross cut sled.

[@trick58]

Thank you for the review. Very helpful. Covered everything I need.

[@mikekennedy3173]

Thank you for your great review. I tried for the first time to make about 16 cuts on a 4x8 3/4 ply and these tools helped me out a great deal. Thank you again for your tutorials.

[@timk9700]

Great video.. OK here goes.. I have a Shopsmith 500 with all the stuff on it. That being said, I won't/ can't cut a full sheet of ply safely. You have given me my answer. Thanks Tim.

[@philipshields1183]

All you need is a skill saw and a line to follow. Use both hands on the saw. Support your stock on horses with scrap beneath. If you're worried about it walking...clamp it. If you're scared with shopsmith, find a new hobby.

[@oooldman11]

Good news..... Kreg decided to make a connector plate now you can connect another 4 foot section they heard everyone complaining and decided to rectify the problem

[@Nikkimaya1]

I don't know about all these people saying it don't fit a wormdrive. My wormdrive Skillsaw fits perfectly. Just flip the little gray piece over in the front like the instructions say and your all set.

[@mskehan19]

I am big fan of Kreg tools but I have nothing but trouble with my rip cut on large cuts. You need to spend plenty of attention when you first start then finish the cut as the guide is too small IMO and causes movement with the blade. Also, when cutting straight it can move so need to pay attention particularly when you need to move your body on long cuts. I wrote Kreg Who responded that they were lengthening guide but does nor appear is happening.

[@SuperGokuSon]

I thought so to but come to find out there are clamps they sell to eliminate that they go on the bottom of the track and then it clamps to the wood no more flex with he track... Go on amazon and look up KREG 2-Piece T-Track Clamps. This only works with the Kreg ACCU-Cut and the Kreg KMA3700 ACCU-Cut XL. But it eliminated all of my problems with variance and wobble in my cuts.

[@theacase8738]

You seem like a really nice guy. I want to suggest having an ENT doc weigh in on your nasal congestion. You will be so happy and healthy breathing through your nose. Thx for the review. I am a newbie and expect to invest in these tools.

[@JS-mt6wp]

Thanks for the review. How do these guides do for bevel cuts?

[@kellysweetman6070]

I've got both, and they work great. Especially when you need an extra hand.

[@VengeFulHemi]

Many many thanks for your video. Perfectly explained. Question: if you have the accucut with the 100" capability(kma 3700xl), you can do a rip/crosscut larger than 24" so you wouldn't need the rip fence attachment. Am I correct? Thank you.

[@fishmaster007]

good to see you john, awesome to be on the tia crew

[@tugnut1]

Thanks Randy. I am thrilled to be part of the crew.

[@kevinschneider5418]

for storing your styrofoam. I just cut mine into 4 - 2x4 sections, then lay it out as 1 panel when I need it.

[@Toolsinaction]

I love that idea. Thanks

[@matthewinga9546]

I have done that same concept with a make shift platform camping bed. I used a full size sheet of plywood cut in to 6 square PCs. I used door hinges to fold it up like an origami puzzle. I laid it on a folding, expanding overnight bed frame.

[@joannamartin1003]

Use painters tape on the seams for an easy fold too.

[@joeycastillo1496]

Thank you for the review!! I have both and it works as advertised.

[@Episode8wasgarbage]

Would you order the Accu-cut with the 4 foot extension, or the accu-cut and rip cut combo? The extension kit is $90 so it's more than the whole set-up for some reason, but the rip cut is only $35. I feel like a 8 foot guide would be cumbersome when your not trying to do a full sheet.

[@kevinohara8671]

Iv got the kreg guide and it is flimsy so have beefed it up in the recesses underneath with 6mm ply you could then mount that on another platter also in 6mm ply it would be great if the guide was all aluminium welded but is brilliant as an idea and works very well the locking mechanism is dodgy mine came apart but I clicked it back together and have got used to being careful with it iv also put 2 extra screws thru the plastic base plate into my saw as i leave it set up all the time hope that helps

[@saulgoodman2018]

Or just ask Tom Silva. He'll just tells you to get a Fest tool.

[@danje10]

Rip-cut is only as straight as the edge of the plywood or other wood that you are cutting. From the lumber mill, 4 X 8 sheets of plywood, MDF, etc are generally pretty darn straight on at least one edge, but.... ya gonna count on that? Whereas, the Accu-cut is straight (as long as you carefully line up the two tracks when you first assemble -- use a solid straight edge before tightening down those connector bars) and with the new Accu-cut XL, you CAN rip a full length 8 foot sheet of plywood and it will be a straight cut! Did anyone mention that Kreg now sells an extension for the original (50") Accu-Cut track so you don't have to run out and buy a whole 'nother sled (some folks used to buy two full Accu-cuts to make it longer) nor do you have to buy the new Accu-cut XL (which includes another sled) to get the full length for a good rip-cut? The way I see it, we'll never need the 'rip-cut' track again. Besides, the rip-cut track thing requires you keep the side-pressure against the existing edge to keep your cut straight and accurate. Accu-cut works best with NO side pressures, because you don't want the darn thing to slip! If it does slip (slippery already finished woods, some clean MDF) yes you can buy Kreg's expensive cute little clamps or -- just make your own with some 1/4" X 20 bolts that the heads will fit in the tracks on the underside and some simple wood or anything-else to clamp the track down at the edges of the wood you are cutting. Much cheaper than Kregs cute little clamps. But... Kreg SURE does make some great stuff! They are amazing with all that blue plastic material that is tuff enough, and yet still light enuff!

[@DaCake2]

Hi there... you seem knowledgable about them and I was trying to decide which one I should get. I noticed the XL version and if I go with that one would you say there is no need for the rip cut? Or does it come in handy to have both? Thanks.

[@TruthSeekerAi]

dont forget the saw will cut off a lil bit of the blue plastic guide to make it really straight they do this cause when you join the 2 aluminum parts together the blue plastic part can be out of line

[@MasterTuttoo]

I got a question my guy, how do u adjust ur saw depth so perfectly so u don't cut the supporting/bottom surface

[@Toolsinaction]

measure and use foam

[@woodprojectswithalex2692]

Awesome explanation about both tools. Thank you for sharing that with us.

[@basanistes359]

There is some weeble wobble when the saw is on the track. That and it will move. Get the clamps. The starting block is worthless. It shoves into the T-track and isn't screwed down so it can move. Be aware of these limitations. Another thing. The clamp that holds the thingy to the saw is on plastic. That can move and break. Keg should have made that out of metal.

[@Rebel1280]

I know this is a 2 year old post but given CNC tech, wondering if there is a 3d model for aluminum.

[@T70781]

A friend of mine bought one and it had about 1/16" slop between the plastic molded part and the aluminum extrusion. He called Kreg and they said that was normal. I measured the slots in the plastic molded piece and they were different widths even though they were supposed to be the same. That indicates an injection mold issue so chances are most will have the same problem until Kreg corrects their mold. The way it holds the saw is cheesy too. This tool is not representative of typical Kreg quality. They should have never made it past the QA process. My friend ended up spending a fortune on a Festool track saw but he loves it. If you buy one of these check it for slop before you go to tyhe trouble of installing your saw. Hopefully Kreg corrects their mold problem soon.

[@tugnut1]

There is a little slop in the Accu-Cut track and guide plate. That is for sure. I think they could fix this issue with an adjustment on the bottom of the plate. Maybe some adjustable rollers in the slots. I agree its not as accurate as a track saw, but its a better option from the Bora unit. I do really like the Rip Cut though. That seemed to be really useful.

[@Omnivorous1One]

What type of clamp would you recommend for use with clamping down the Accu-Cut or does it have a clamp system built into it?

[@davidholmes3776]

This only work with ply? I’ve a really tiny shop and make cutting boards, and cigarbox guitars. No room for a tablesaw. Would I have problems ripping through a metre of 50mm hardwood?

[@Toolsinaction]

I dont see a problem

[@fergusrb]

I don't have a table saw and want to know if you can make 45 degree cuts? Would like to rip strips with a 45 degree edge to make a French cleat wall system.

[@DaCake2]

Thanks for the vid! Is this the best system for ripping plywood into 2x8 pieces if you don't have a great table saw?

[@texasmike7994]

That’s why I bought the xl model cause I can make any size cut. 👍

[@jimmiller4951]

Great video , thank you. Can you cut an angle on one of these ?

[@soyomofo3162]

Can't you buy 2 Accu cut kits and combine them end to end? You just need and extra set of setscrew plate connectors that should be order as parts from Kreg, I'd assume? Hopefully now you can cut 108".

[@richardlug6139]

You can buy an track extension kit that includes the 50” of track and connectors from kreg so no need to buy 2 Accu Cut’s unless you want two saw plates.

[@hopenavajo1391]

Track saw guide are good for plywood that have jagged edges length and width wise.

[@justinpoe1392]

What is your finish scheme on your cabinets in the background?

[@snoww2009]

Do you think the Kreg rip cut is safe to use on a 1x10 lumber to reduce the width from 9-1/4” to 8”? The reason I am asking is because one side of the cut will be 1-1/4”. It seems too small to use this jig.

[@davidfeldman7315]

Kreg Accu-Cut is now over 96 inchs

[@SOLDOZER]

Ummm....no it's 50".

[@davidfeldman7315]

Damage, Inc. get a add on Double it

[@srairmand]

What if the plywood is not straight on the edge?

[@two9s649]

Most plywoods from home depot or lows even lumber yards dont have perfdctly str8 edges even when they look str8! So that was also my question! Im thinking the accu cut is a better choice cause of that reason!!

[@marlawhite3682]

Thanks for the info!!! I been needing something like this Do u know if it will work on the roybi 18V battery saws?

[@tugnut1]

I do not know. If you give me the model number, I can take a look at it and I could give you my guess.

[@AequitasSaints]

The only thing that works for Ryobi is the trash can.

[@DoresoomReviews]

It works with the new Ryobi Brushless 7-1/4" saw.

[@raabsand]

Yes It works with the 5.5" ryobi circular saw

[@SlicedAsiago]

I have been seeing a lot of craftsman cutting on top of foam. Is this foam a insulation board?

[@bernarrcoletta7419]

Yes

[@russwebster3302]

Thanks for the review John. #TIACREW

[@dannyyaldoo]

Hi, I have Makita 16 16/5 inch, what is the best track for it?

[@jaescala]

Thanks for the information. It is very helpful!

[@Toolsinaction]

Glad it was helpful!

[@lastknight7778]

Hi John or anyone reading this, I have the Accu-Cut System but I'm having a hard time finding a thick piece of Foam for making cuts, like the one being utilized in this video. Can you please tell me where I can acquire one and the brand? Thank you.

[@Toolsinaction]

I got my sheet at the Home Depot. They should be located in the insulation isle.

[@paulrobinson9318]

Roofers have this stuff in huge piles used around here - maybe $1.00 sq ft or less. UP to 6 inches, I think.

[@dronetrooperfpv7810]

Does the Kreg track saw fit the Accu-cut track, if you want to upgrade in the future?

[@hotrodchevy56]

Yes

[@dronetrooperfpv7810]

I was on the fence with the Kreg and Makita saw. Since I have the Accurate-cut, I think I might pick up the Kreg.

[@paulajeffrey6706]

Try buying them in England ,I wanted them for Xmas but as only in America postage and tax made the price way too high ,I made myself a wooden guide from KZbin video,

[@adrianlouviere7650]

Thanks

[@kevinswanson9061]

Was hoping to use this with a wormdrive skilsaw. You noted that it would not fit, I am wondering if anyone has figured out a work around

[@tildenmobley9676]

He made a false statement! It fits! All you gotta do is pull out that little gray piece that sits in the front between the two clamps that hold the saw down. Flip it because the underside has slants specifically made to fit saw with a slanted edge

[@Nikkimaya1]

Fits My wormdrive Skillsaw

[@saulgoodman2018]

For a straight edge, forget about tracks and track saws. A straight scrap lumber will give the same results.

[@dt2419]

Mike Girard a track is much better and easier than a straight edge, there is a reason cabinet makers use them very often. Panel/table saws and a track saw are your best friend if you can afford them

[@ogatkinson6274]

Thanks for video.

[@LEMIANGEL]

Thank you!

[@philipshields1183]

Does it accommodate the 7 1/4" mag worm drive saw that the entire world of commercial construction uses?

[@BType13X2]

I use a makita hypoid saw with mine and it does just fine.

[@elderfarms]

It doesn’t work with a mag77 damn lol that’s a very common saw too

[@tugnut1]

It does not. I was surprised and I was glad I had one at home to notice that. I agree, its one of the most common worm drive saws out there.

[@easygalleryframes]

so helpful - thank you!!!

[@markk2745]

I own the rip and accu-cut. I have not used them yet, but after doing the math for what i got. I purchased a cordless circular saw as well. I wish i went for the corded makati sp6000 track saw. (limited by whaat is available in my country) So i spent 100 on the accu-cut, plust 120 for the cordless circular saw (no battery, i have those already).. I can get 50 inch of track plus the SP6000 track saw for just about $400.. Sure thats nearly 100% more, but the ease of use and fiddling required to set these up up I wish i took a different path. Having said that maybe i'll love he accu-cut (own rip-cut also).. but i don't think the will every give me the quality a true track saw will. Just an observation. Not knocking anything or anybody.

[@classicappetite]

What is the foam you used underneatch the plywood? Thanks

[@Toolsinaction]

foam insulation board

[@MarcosElMalo2]

Any flat sheet of styrofoam will work, but the type shown here is less messy than beaded styrofoam. As far as storage, there is no reason one cannot cut a 4’x8’ sheet into two 4’x4s or four 2’x4s. Tape them together so they can be folded and unfolded, using your choice of heavy cloth tape (I prefer gaffer tape). Flimsier styrofoam sheets can be strengthened by taping stiff cardboard on the back.

[@tugnut1]

@@MarcosElMalo2 I like this idea.

[@corporateriot]

Really nice review sir. Subscribed.

[@waldvogelreview7755]

The rip cut is no longer necessary now that the accu-cut exists. The Accu-cut can effectively do the same thing, so why waist the time swapping tools. I would rather spend the extra time measuring and marking (personally)

[@DaCake2]

@Mike Girard I think they make an XL version now that can rip up to 8ft.

[@loganp7043]

Great option instead of buying a track saw

[@robertortega385]

Great video my friend 👍

[@hopenavajo1391]

It's good but it's not calibrated and frustrating to saw accurately.

[@rickymcgrath2314]

I dont think i’d compare this to a track saw.

[@tugnut1]

I agree in the fact that this unit isn't as good, but its an alternative to it for the hobbiest or weekend warrior.

[@rrwoodworksmore9239]

Nice ... Now can u send it to me so I can get back to cutting some wood...

[@tugnut1]

Randy! Long time no see. How have you been?

[@stonecold313]

Man l like that shit,and those guides

[@1stfloorguy59]

I want them to make it all aluminum

[@sindelm7437]

Why not just buy the acu cut? It does what the rip cut does.

[@TheLamer5000]

The rip cut can cut (theoretically) any length, with the accu cut you're limited by the length of the track. That said Kreg sells extension packs for the accu cut that let you rip a full sheet of plywood with it

[@SuperLEEEDWARDS]

Should have shown us WHAT YOU WERE DOING LIKE TIGHTENING THE BASE PLATE INSTEAD OF THE STILL PHOTOS, next time try and have an overhead view of what your doing .

[@tizben]

Whos this guy?! He looked nervous though. Don't be nervous guy! It's just us :v)

[@rustyridenour2136]

I got a table saw at lowes for $50.00,still in the box

[@scottb4062]

A $50 table saw belongs in the box. On a shelf. Or in a landfill.

[@DaCake2]

@@scottb4062 lol

[@louieg8825]

12:30 why you said "Full piece of shit"?

[@thunderchiefj7]

how much does Kreg pay you to endorse them?

[@joeframer9642]

John your from workshop addict “ kind of” why are dan and Eric being lazy

[@tugnut1]

They aren't being lazy, they are busy as hell. Besides making sure us new guys and gals are properly set up, they are hitting the road to get the latest tool news. I'm positive they will be back in the spotlight shortly.

[@saulgoodman2018]

I prefer a long thorough review that a short review, where they just don't read off a spec sheet. Which most of the time, they don't even get the specs right.

[@salvadorebertolone]

bwahahaah i love the shirt.

[@tugnut1]

Thanks. I live in Michigan, but I have always been a Steelers Fan. So the die hard Lions fan hate this shirt. I think it is hilarious.

[@SOLDOZER]

C'mon dude. It's plastic garbage. Just make a jig instead of fumbling around with that cheap plastic garbage. If you cant make a jig with some scrap lumber, then just stick to making sandwiches.

[@poofypoopy8838]

So wait i already have the rip cut so can i just buy the track separately because i have the base plate.

[@hotrodchevy56]

Yep. But the expansion kit may not come with the edge guide but you may not even need it.