Kreg Kitchen Makeover Series Part 9: How To Dress Up Kitchen Cabinets with New Hardware

[@tommccarthy3605]

Really appreciate the video. Thanks, Gary.

[@KregToolCompany]

Glad it was helpful!

[@hackdlc]

I will definitely invest in the drawers installation jigs and the drill guide for knobs and pulls.

[@robgilbert8865]

Gary great how to kitchen make over vid’s, very helpful you sure make it look so easy updating a kitchen with Kreg Tools. Thank You

[@KregToolCompany]

Very welcome!

[@_johnfischer]

Awesome series! I watched it from start to finish last night & am re-watching today. Also wondered about the lazy Susan door & would have loved an overview with some tips on painting the old cabinets. Did they just sand those down? I've got some cabinets like the old ones in the video & it's not a very paint friendly surface. But I'm super excited about this series, really believe I can handle our whole kitchen myself! The Kreg tools look like they will really make this job much easier.

[@ronmack1767]

I really enjoyed Gary's videos on this kitchen makeover. Thanks Gary. God bless.

[@mikemccrelles7204]

I too watched the series, great tips and great commentator.

[@darrellblair5818]

Fantastic job. Great guy with a great presentation. He sold me on Kregg tools.

[@andyfunke9484]

Ok I have a K2 master system, complete in the original box, purchased brand new, and has been used a lot. Have been a fan ever since. Fast forward to present, I have more Kreg products than I will ever admit to my wife. That's all I have to say about that. But did anybody notice the before and after pictures. Other than the counter tops and paint, it's the same kitchen. Even the appliances are the same!

[@BlahBlahManYeah]

They added tile backsplash as well.

[@tonybanner2982]

Same I was thinking,Going through these updates to exiting would cost more then New,unless you wanted the custom tweeks

[@cvzphotography]

Great series

[@koofizohardware]

Thank you for the video, very professional, and help us a lot!

[@KregToolCompany]

Glad it was helpful!

[@bosscatrocket]

i love kreg tools

[@independent900]

Good jigs are quick and easy to setup. Since you chose not to do the setup on camera, I have to assume it was more tedious than you let on. Drilling the holes after the real work of dialing in the configuration is always easy.

[@gpro76rmp]

How do you keep the drill guides from moving if they are adjustable? Do they have a locking mechanism? I can see the center drill guides being set in its own spot on the jig but if you move them for drawer pulls, what locks them in place?

[@TheRecoil2004]

They have a nut on the back that you tighten.

[@UcheIfeNwabuoku]

Wait, how do you measure how far the holes should be for the knobs? I don't get how you know what distance to place the two holes where you drill.

[@dustinmay2290]

What are the sensuous of the panels around cab doors

[@dirtsmiles8098]

This is a great series. How did you make the corner door for the lazy Suzan?

[@KregToolCompany]

Gary made the frame on one side of one door 3/4" smaller than the other. That way, when you join the two together, you get the 3/4" back, resulting in the 90-degree corner. The existing doors had 45-degree rips on each door, and then they joined together. Either method works.

[@MrSmokinMirrors]

So how did you paint everything? Mask and spray, roll, brush?

[@ThekiBoran]

Jason Hamilton Not exactly important for the purpose of this video but I would definitely paint first. Maybe drill the holes, have them paint then install pulls.

[@stoneyj1a1]

He had professional painters come in and spray

[@kbob8424]

what type of wood is used for the drawer fronts and how do you address the edges? just sand and paint?

[@photog1529]

More than likely poplar since the cabinets will be/have been painted. Probably a slight round over on the egdes would be my guess...just enough to take off the sharp edge.

[@Steelcam1]

Great videos. What type of wood was used for the rails & stiles?

[@wac915]

It looked like Poplar to me.

[@louindorato6855]

What do you do if you can't put a center pencil line on a finished cabinet ?

[@erickeller6766]

Place some brown painters tape over the face of the drawer where you plan on drawing a pencil line and drilling.

[@lynardburt5992]

Me I would put holes on doors, then painted, then add hardware. I like Kreg Tools to make life so easy.

[@whitehh15]

I really doubt those cabinets were painted with the hardware on.. Everything this guy does is legit

[@jcjr5563]

What wood did he use for the door fronts? It has not been answered yet in this series.

[@photog1529]

My guess is poplar since the cabinets will be/have been painted.

[@JamesMollwrestling]

Looks like poplar

[@glendavargas6058]

how did you paint everything?

[@stoneyj1a1]

professional painters spray that finish

[@JerryandJack]

👍🏻👍🏻👍🏻