Finally modifying my HARLEY BENTON Fusion-II | Part 1 | Guitar Tweakz

#harleybenton #guitarmods
I'm finally modifying my Harley Benton Fusion-II guitar. What exactly will I mod though?
Check you the video to figure it out. Enjoy Guitar Tweakz!
** Why the ANZEIGE (=Ad) message? **
According to german laws everyone has to mark their videos as advertisements as soon as there's a single "subject relevant" product, tag or link in it. Even if you didn't get paid for making that video. Sounds confusing and it really doesn't help the viewer to see which is a paid review and which isn't. But it's the law so whatever...
--- The line of truth: Is this actually a paid review? No it isn't. (I update this line for every video).
Follow me on instagram: @kris_barocsi
Timestamps:
Introduction
00:12 Intro playing
00:33 Is it stock at the moment?
01:07 What I don't like about it...
01:43 Playing | coil-split
02:59 What will I modify on the guitar
03:53 The new pickups are...
05:22 Playing | stock pickups and no mods
08:18 It's time to modify this thing!
08:59 The original electronics
09:47 Let's start sanding
13:12 What about the curved parts of the body
Gear used in this video:
(the Bitly links are Thomann affiliate links)
-Harley Benton Fusion-II Roasted SSP bit.ly/31FVawf
-Honey Bee Double Trouble: bit.ly/33COaU3
-J Rockett Archer overdrive: bit.ly/2Ges1z8
-Analogman King of Tone www.analogman.com/
-Walrus Audio D1 Delay: bit.ly/2W4McqU
-REVV Dynamis 7/40 head: bit.ly/2IxwoId
-Universal Audio OX BOX bit.ly/2IyOeuj
-One Control Agamidae switcher: bit.ly/2YZgiib
-Ernie Ball cables and strap: bit.ly/2Io0dfg
-Cordial CRI series cables: bit.ly/2XiVLBR
-Evidence Audio patch cables: bit.ly/2Ixylo1
Other gear I use in my videos:
-Fender Telecaster Custom Shop '53 reissue
(a similar custom shop tele: bit.ly/2KFVJld)
-Gibson Les Paul Custom Shop '58 reissue bit.ly/2FxKvek
-Gibson Les Paul CM 2015 - heavily modified (thin nitro refin; Lollar Dog Ear P90; Emerson electronics)
-Barocsi Troublecaster - Custom built T-style guitar with Gretsch Filtertrons
-Barocsi "Frankenstrat" (2000 Fender American Standard body + Warmoth neck)
-Two Notes Captor X: bit.ly/33FPfcW
-Coppersound Foxcatcher: coppersoundped...
-Supro Tremolo bit.ly/2Zpxn75
-REVV G2: bit.ly/2NbpV9R
-REVV G4: bit.ly/2ZhxX39
-Tate FX Antares overdrive www.tatefx.co.uk/
-Walrus Audio Lillian phaser: bit.ly/3czfxB8
-Tate FX Raise the Dead Germanium: www.tatefx.co.uk/
-Dunlop Gypsy Fuzz pedal: bit.ly/2VKw4K0
-SIB Nick Nitro (discontinued, you'll find it used)
-Morgan 1x12 cab Twilight: bit.ly/2KFihDq
-NUX SOS Looper bit.ly/31TMxPx
The speech mic:
-SENNHEISER MKH 416: bit.ly/2w1EAMP
Audio Interface:
-Audient iD44: bit.ly/2Jo73zN
Check out the Thomann Music channel for some wicked guitar videos:
/ musikhausthomann
Cheers,
Kris Barocsi

[@adriansoul7223]

That split sounds legit the closest i've ever heard a split coil sound like a strat ever.

[@hearpalhere]

I was quite impressed by that too! Sounded really great.

[@adriansoul7223]

@Halli Day not at all, it will never sound like it

[@bfiume]

I’m looking forward to the next part of this adventure. You know, I remember the day you got that cool looking HB like it was yesterday. How fast the days go!!!!

[@dragonsquare2802]

Hey Kris, These vibrating sanding machines are awesome for more delicate work. If you want to sand faster a random orbital sander is way faster in my experience. I got mine (Bosch something)for about 50€ at obi and I am pretty pleased with it. I sanded my tabletop way more often than I intended to.. I messed up the finish twice sooo.. 😅

[@tomdameek]

Kris. When hand sanding I use Nitrile mechanics disposable gloves. Like super strong surgical gloves they are like a second skin. It’s Important it’s Nitrile NOT Latex. Latex is bad for you. Great video- cheers 😀👍👍

[@KrisBarocsi]

All I have now is latex and I only use that when staining wood (for obvious reasons). I’ll check that out, thanks!

[@rahzark]

I love to watch projects like this, because I would never have the courage to do this myself 😂

[@bfiume]

Ditto on both

[@KrisBarocsi]

DO IT DO IT DO IT DO IT! Hahaha! It’s a lot of fun.

[@rottalmusik6563]

Yep, do it! Its fun and a relaxing sen exercise if you take your time and train your patience (like Mr. Miaggi would suggest)😉💜🤘. I build and modded several guitars and I can only say its very rewarding to gain your skills and experiences🖖

[@BOBANDVEG]

Dude.... neither did I.....but I just got a epiphone lp special and dragon fire quadrails ......I'm going for it

[@marting.official]

I need part 2 right away 😅. Great video !

[@KrisBarocsi]

Hahaha! Soon Martin, soon. :)

[@patrolduty8715]

Thank you for boost my confident with HB guitars. I decided to purchase HB Fusion-T HH HT EB OCT. I love features of Fusion series, but I am a little bit sad because they go with H-H instead of S-S config for a Tele. Right away, I will swap stock pups with Bill Lawrence L-90 pair. For my ultimate DREAM Tele, I will buy a premium kit from Warmoth and build S-S config Tele for my classic sounding dream Tele. I listened to your DIY Tele with tremolo arm, it sounds awesome. It encourages me a lot.

[@Tarsan97]

Good job. I understand what you mean about the humbuckers and also agree that the guitar sounds great with the coil split in. Sometimes when the humbuckers get to hot and gets this extremely high output, they tend to sound sterile or clinic in a way. Losing personality. I think it is no coincidence the originals are designed as they are. But we are all different so it is always a good thing every time a guitarist finds his dream tone.

[@MaxSoloMusic]

Watching the sanding process was extremely satisfying :) Looking forward to see the end result

[@KrisBarocsi]

Thanks a lot dude! I have good news: there’s more sanding in the second part. Hahaha! Thanks for watching!

[@hearpalhere]

Nice video Kris! I love that you reused the "Does It Djent" song!!!! :-D I recognized it right away when the riff came in.

[@raulunzue3159]

It's looking awesome , at the begining i was not that sure the wood finish would be that great. I expect you to oil it without any colour and let it matt finish.

[@2bikemikesguitartopics145]

Kris when you do a complete overhaul like you plan, it becomes a kris custom. I like the silver so glad you're keeping it.

[@niclastname]

Oh man I'm excited for another series of this stuff, even if it's shorter. :) I loved the last two you did!

[@dragan4658]

The roasted maple looks fantastic & blends well with the sparkle top & sounds good. Will be interesting to see with the mods!

[@PooNinja]

I love the sound of my Harley Benton Sc custom Fr in the middle position with the coils split, oooh what a gloriously fat snappy sound. Do what you want with the back and sides just Don’t hurt that beautiful sparkle top!!!!

[@Surgicalsteel222]

Nice! I have the same guitar and love it! Put some Seymour Duncan’s in it, changed the electronics and some overal TLC and now it punches even more above its weight! I really enjoy watching these projects

[@jitsroller]

Great video. That neck looks really nice. I bought an SE PRS I'm wearing the frets out, it's only been two years and they are groovy man. I'm thinking about get something like that and modding it. Great content.

[@juandemartini817]

Great video! For the sides you can use a power drill, that wood looks amazing i wouldn't put any color on it, the oil will make the flame pop up really nice.

[@SIMPle-BoXMaN]

That colour is awesome!

[@ViktorStockmann]

Awesome, another guitar tweakz, my favorite series of yours! Already looking forward to the next episodes! I was wondering why you didn't cover up the front from the beginning? Cheers Vik

[@KrisBarocsi]

Poly is so ridiculously sturdy, there is absolutely ZERO scratches or anything on the front. If it was nitro I would’ve covered it up of course. Guitar Tweakz 4 life! 😝

[@maciejkotas]

That looks insane! I got myself the very same guitar and love it, though I have already make some tweaks: I swapped the electronics with CTS and switchcraft, I replaced the pickups with polish custom shop, hand built Hathor Juicer and BGV (these are KILLER!). That is now my No. 1 axe, can't take my hands off it. Good luck with Your project, cheers!

[@Mark-gd5vr]

I Want to do this but the wiring seems to hard

[@wasichu66]

Yeah, those split sounds are insane, really thinking about getting this just for those tones (can hardly otherwise justify to buy superstrat #55 LOL). Totally agree, oil back n sides are mandatory! Really interested if this method works to remove the poly, on flat sides yes, but on the curves, and on the inside of the horns... ouch, maybe dremel time but really hard not to mess up the curves with a small barrel considering the force needed. Heat gun doesn't go well with thick poly either, maybe a chemical solution? if I go for it I might just lightly sand the gloss to make it matte, although I would love oil, with indeed a subtle stain. Oh, and love how your work bench is actually a... bench... weeeell, Grandma's bench ;P

[@fedest]

Ohh Wow!! That's quite reassuring: I have the same Harley Benton, and same experience with the original pickups: love the split sounds, but not so much the humbucker sounds. And interestingly enough, I ordered the same replacement pickups: Fishman Fluence Classics! :-D I got them delivered a couple of weeks ago, but haven't had the time to install them yet... I was hoping to do that this weekend, but maybe I'll just wait until part 2 (and 3?) of the video is out, to see if the change is worth it, and maybe get a couple of good ideas ;) (no body sanding for mine, though!). Looking forward to next ones!

[@kawasexy030]

I think that HB has a satin neck, so I assume you won’t touch it.. what would you have done to satin a super high glossy poly finished neck? Does the neck’s wood type really matter in this process? Man when it comes to modding guitars I always have sooo many questions. It’s just something I love doing and learning about to the point I would buy ANY Harley Benton and turn it into a beast. Looks like that’s what they’re supposed to be for. Cheers man, love all your contents, they’re just sooo useful

[@bluedawn2669]

I can share my personal experience: you can tape off the sections of the neck that you don‘t want to sand at the headstock and the neck joint. Use multiple layers and make a nice curve. Then you sand, and I would suggest to start rough, 50-100grit. Poly is super tough and you will need to change the sanding paper a lot. Then go up to 400 wet sanding, use a tiny amount of wax if you want and done. If you want to re-finish the neck that is a different story and a lot more work. I would recommend an oil finish with one penetrating oil and one oil that hardens the surface. Apply the oil with the sanding paper, let dry for 10 minutes, then firmly rub in the gunk with a cloth. Then wait for 24 hours until applying the next layer.

[@T.m.K]

Season 1 very interesting, we waiting for " 2" :)

[@dave1812]

That Neck Looks Insane for a Harley Benton!

[@Oilid]

Fascinating video! Thank you for sharing! I wish we were neighbors, I'd have so much work for you! 😁

[@KrisBarocsi]

Well in this case... might I say I’m happy we’re not neighbors? Hahaha! I’m the one craving for someone that and my stuff! lol

[@Oilid]

@@KrisBarocsi 😉👍

[@06szymonszymanski]

This is going to be beautiful guitar for sure. Can't wait to see it done.

[@yannisvasileiadis3992]

Great video, I find all your builds inspiring and engaging to watch (even though I'm still working up the courage to change the nut on my guitar, let alone go crazy with a sander on it 🤣)!

[@ChrrZ]

the split coil sounds great on your setup!! on mine i really like the humbucker sound, though it was a bit on the dark side but i´m able to make her scream!! but the split coil sound were not usable at all on my setup, but yours do sounds great!

[@joesatchton212]

Kris: great stuff as always! I'm no expert like you but must ask: why didn't you protect the front side of the guitar during all that sanding? To my layman's eyes, all that dust on the work surface could not be good for the finish on the top, right? Even though it is the same thick polyurethane. Or you didn't protect the front because you will polish the entire axe anyway? Cheers and looking forward to part II!

[@KrisBarocsi]

Hey, poly is so crazy sturdy, there’s literally zero scratches on the top after all that work. I was ready to polish it if necessary but there’s no reason for it. It’s maybe hard to believe, but that’s how hard polyurethane is. Cheers

[@joesatchton212]

@@KrisBarocsi Hah, thanks a ton for replying. Great to know! :) Cheers man!

[@katsumotoamaya6540]

Oh no a Cliffhanger. :o)

[@josearjona3728]

I LOVE this kind of videos, thanks man

[@KM-302]

Interesting video but tip one. Buy a good sander. Random orbital, DA. Far more efficient and much better finish.

[@jicklesjingles8134]

Hi Kris, sehr coole Ideen! Bin gespannt, wie die Rückseite wird. Was für Tonabnehmer sind denn das ursprünglich?

[@MultiGuitarDave]

I like stainless steel frets. Especially with bending. Like sliding over butter.

[@edspageusa1yesloveyes937]

Thank 💜 You LOVE

[@rvburbank1]

A heat gun and a scraper will make quick work of removing the finish. I've done it a few Ibanez guitars, and they have very thick poly finishes

[@tombstoneisevil]

Hey Kris, how you doing man? Since you are an awesome modder and tweaker, I have a question running around, how to stain a neck? I dont mean change the color, I mean how do you make the white maple neck into a blonde, I've found so few info about, can you help me?

[@simonn4077]

It would look nice in a black glitter-burst!

[@MauricioGarcia-mk5bz]

Hey buddy. Can’t wait to see how you install fishman pups! 💪🏻🤘🏻

[@KrisBarocsi]

Hey hey, so you found the channel. Nice! Have fun with the videos. It might take a few weeks until the Fishman installation comes but I’m working on it. 😅

[@MauricioGarcia-mk5bz]

@@KrisBarocsi thanks bud. See a lot of interesting videos. I’ll have fun with those in the meantime. Thank you!

[@jochen970]

i love buying HBs and modding them

[@GSXR1k600RR]

Loved the video. Now I want to do one. I wonder if HB would sell one directly with only the front painted

[@michaelogden5093]

Modifying a sparkle guitar... go-go boots would look cool.

[@boomerbassmeme]

You are a madman Kris! Bet it will be amazing when you are done though! 😎👍

[@KrisBarocsi]

I know man. Hahaha! I can’t help myself. I just need to do a mod every now and then. Can’t wait to see this one at the end

[@BadMotivator66]

your funky playing is sick :)

[@KrisBarocsi]

Thanks a lot! I don’t have a clue where the funk influence came from to be honest. The only funk related music I love is RHCP. 🤷‍♂️ haha

[@valueofnothing2487]

Sounds excellent.

[@KrisBarocsi]

Yeah right? That’s why I was not rushing with modifying it. Now it’s time though. Haha

[@rottalmusik6563]

A great project 💜🤘 now I am looking at hb fusions and Fishmans - maybe I will do somthing simillar🤣

[@KrisBarocsi]

Haha! Yeah I have a good feeling about this one. Cheers!

[@MikeLute]

The finish on the backside seemed to be very tough. How many pieces of sandpaper did you have to use? Really looking forward to see the outcome of this project. I just finished my first eclectronic and pickup swap with my cheap LP studio (2008) and I am still messing with the pickup height to find the sweetspot.

[@imac29]

I need to start doing this again. Long time playing the "same" guitars.

[@pauldncn1]

Nice I hate shiny poly to I still smile at Does It Djent That’ll be in my head forever ! 👍

[@KrisBarocsi]

Haha! Yeah don’t worry, this one will djent pretty well at the end, I’m sure! Thanks Paul, cheers!

[@horschy4856]

Hi Kris, Very cool video! I have an old roundback guitar wich I'm planing to repaint. Never done that before so I have a few questions: How can I tell which kind of laquer is on and does it matter for the new lacquer? Do I have to remove all of the old paint or can in put the new paint over the old one? Thanks a lot Max

[@MrRabbitPT]

Hey Kris, your videos inspired me. I already ordered an ash strat body and studied all the theory necessary to do a fantastic sonic blue xD Here in EU, what brand do you recomend (of nitro paint)?

[@maximetremblay4546]

Hey Kris, can you elaborate on the stainless steel frets. What don't you like about them is it a question of feel or sound? I am asking because I am at the stage where the divots in my nickel frets are getting too deep to sand down and polish. I was considering stainless steel for increased durability but not at the expense of sound. Thanks again for the awesome content. Cheers

[@KrisBarocsi]

That sounds like a fine question for the next Comment Time video. 🙌

[@maximetremblay4546]

Great looking forward to it. BTW with regards to your super strat, I have an old Nuno Bettencourt Washburn models that I got in the mid nineties. That guitar with the alder body in bare wood finish (lightly oiled actually) always felt very lively sound wise. Blocking out the trem block with an extra wedge block also contributed to the extra liveliness of that guitar.

[@madgeniusmusic]

Should be a fun video series.

[@KrisBarocsi]

It really should. Let’s hope the dude doesn’t mess it up. 😆

[@madgeniusmusic]

@@KrisBarocsi I’ll drink to that.

[@KrisBarocsi]

@@madgeniusmusic cheers Danny!

[@tranka6112]

Super, Kris! Freu mich schon auf Part 2 :)

[@KrisBarocsi]

Cool, danke! Kommt ja auch bald. 🤟

[@ilmisxx2]

There is my explanation what happened to the sparkley benton 😁 I thought you will repaint it in different color or do some funky imitation of an f hole or something. You like having a star motive on your guitar so maybe a sparkly star of some sorts 🤔

[@KrisBarocsi]

Well... my son still has some star stickers so who knows. Hahaha

[@mikehawke2172]

How does the wilkinson bridge hold up for tuning? I own the fusion-ii telecaster version without a tremelo but would like an st version of the fusion-ii for David Gilmour style playing.

[@dvotom]

Hi Kris, please, i would like to ask you, if had an opportunity to compare this model to other types uf fusion II. This type has 22 frets and covered humbuckers and almost every other has 24 frets and uncovered (i previously owned this type and now im waiting for silver sparkle one) So, is there any.major difference in tone and etc.?

[@Skelterz]

What humbuckers are they? They look different from the newer roswells in the fusion T?

[@jadedshade]

I'm surprised you weren't sanding longer to get through the poly finish, they are tough! 🤣

[@KrisBarocsi]

I know it doesn’t show but you were watching like 5 hours of sanding in this video. I recorded the video in 4 sessions. That being said, the finish wasn’t too thick on Sparkle. I’ve seen many guitars with WAY thicker poly. Cheers

[@jingeetrayvilla49]

Hi chris! I loved the djent song! Great work man. :)

[@Pontanellen1]

Whats that you are playing at 11.18? Really like that groove!! Great build!! Thx for sharing!!

[@KrisBarocsi]

Thanks a lot! It’s a lick I wrote for a video here on my channel. I tend to use my licks and song snippets in my mod videos. Hopefully I’ll find time to write full songs out of them and release an album soon.

[@Pontanellen1]

@@KrisBarocsi awesome licks!! 👍😃🍺 (Yes, I threw in a beer! Its Straturday! 😉)

[@KrisBarocsi]

@@Pontanellen1 cheers 🍻 I might do the same thing too. Haha

[@Masterfighterx]

Random orbital sander is much better for a job like this, they grind way quicker. 🙂

[@dragonsquare2802]

Love these modding videos! 🥳

[@1kozobrod]

What would you recommend to make metal parts matte? I've tried KUDO matt coating (acrylic spray), but feels like it won't last long because of bad adhesion. Maybe I should somehow prepare parts before painting (sanding or some chemicals)? Wanna make my HB JB-75 bass look a bit modern and not to collect fingertips so easily.

[@richardturner5463]

Is sanding better than heat gun for removing poly then?

[@MaxPower-js1sk]

In humbucker mode, those original pickups were a bit ordinary.

[@vinicioserafini5929]

Is there any specific reason why you did not use a heat gun to remove the finish? Would save you a lot of time and effort.

[@KrisBarocsi]

Hey, I don’t like using a heat gun to remove finishes. I’ve seen too many people damaging (darkening) the wood. I wouldn’t have used it on the sides anyhow because of the natural maple binding (wood glue doesn’t like heat at all). And to be honest the back of the body was the least amount of trouble to sand. 🤷‍♂️ cheers!

[@vinicioserafini5929]

@@KrisBarocsi never thought about potential wood glue issues. Thanks for the explaination!

[@KrisBarocsi]

@@vinicioserafini5929 Sure thing! This guitar has a thin maple binding which is glued on. I really don’t want to make that come off the guitar due to heat. Haha

[@MeOnHawk]

I love this kind of content from you!

[@luiscanto3630]

This finish is polyester, is the current finish for low cost instruments and is very thick

[@rickhill6277]

Nice Vid Kris! I have a personal problem with 60 cycle hum. Would you please tell me, do you use a Noise Gate when playing Single Coil Pickups? Thank you, cheers from Salem, Ohio US!

[@KrisBarocsi]

Let me show what I do and how I use my single-coil guitars in a Comment Time episode. 👍🏻 Cheers Rick!

[@rickhill6277]

@@KrisBarocsi Thanks Kris, can’t wait for the Vid. Cheers!

[@ArturBrzozowski444]

11:14 next time try blasting it with a heat gun and attacking with a scraper. I did this when I was taking poly out of my guitar neck and it worked like a charm

[@ArturBrzozowski444]

DOESITDJENT DOESITDJENT

[@KrisBarocsi]

@@ArturBrzozowski444 It will djent it will djent! Hahaha

[@Oscarhobbit]

Perhaps a heat gun or chemical striper would have been faster to remove the varnish on the back of the guitar. Then hit it with your different grades of sandpaper.

[@bucketofnoises7810]

Amazing how a HB is completely shield painted and some other expensive, traditional:) brands are not. Did you said steel frets? That’s also unexpected...

[@summerboy1958]

Sanding sux! 🤮😵 But getting the thick goop layer off ought to make the wood glow. I love wood tones over paint. 🤩😍👍

[@Lee-Buskar]

👍👍

[@grahamkelly8299]

use a sandbag on that thing man!!

[@pedalscapes]

Good stuff Kris!

[@ArturBrzozowski444]

Wait Aren't these the Roswell alnico humbuckers? I'm listening to this demo and be like: wait, I know this blunt humbucker sound I have the same problem as you. I had them in my LP copy and was mainly using them split and out of phase so I've put them into Epi LP special because they look cool Still left them with reversed wiring dpdt switch so they become humbuckers when you pull the knob

[@JoaoMarcelo_1]

Love that kind of content!

[@KrisBarocsi]

Glad to hear that man! Cheers

[@lotusmark2]

Love it mate

[@MultiGuitarDave]

I will change these pickup's for Lambertones the Grinders

[@slinkyfrets]

I have the HSH, and I agree that the humbuckery sound isn't there. It's not the pickups though. I tried some Lindy Fralins Modern Pafs and the difference was minimal. It's stratier than a strat. Maybe the active pickups will make a difference, but I believe the frets and the roasted neck play a huge part in the sound. The thing I like the least is the switch placing. You can't funk without knocking it out of position 😎

[@sunil_bhagtani]

Can you please tell com can i remove the volume/tone knobs since there is no allen key slot. Should i just pull then out?

[@KrisBarocsi]

Yes, simply pull the knobs off. Cheers!

[@sunil_bhagtani]

@@KrisBarocsi thanks for the reply

[@williammolina9792]

Can you dive bomb with the harley benton fusion II. ??

[@KrisBarocsi]

Once yes. 😅 Nah, it’s not really made for that. That’s what the Floyd model is for I guess. Cheers

[@mintsk8er]

12:32 🤣🤣

[@marcelhacker01]

Ha ha - this is exactly the same 'pain' I went through with a Gear 4 Music Strat - I'm not sure I'd do it again but the Paulownia wood underneath the finish was beautiful... If you'd like before and after pics let me know how to get them to you : )

[@josemanuelmesa3530]

Remove sparkle too, please

[@KrisBarocsi]

Maybe one day. Not now though. I like the contrast between the roasted natural neck and the silver finish. 🤷‍♂️

[@marcmadler454]

First again! Hell yeah!

[@KrisBarocsi]

You really have that timing nailed dude! 🙌

[@marcmadler454]

@@KrisBarocsi Yeah! I just startet my mac and than this came up! 🤘😂👍

[@AlexSmolniy]

i call this - to invent a bicycle

[@edspageusa1yesloveyes937]

Please Ask HB For The Left Handed Sparkle With Your Mods...I WILL BUY!!!🌈

[@gergelyzanyi7752]

Bro, are you Hungarian?

[@KrisBarocsi]

Talált. 😉

[@gergelyzanyi7752]

@@KrisBarocsi esetleg Facebokon jelölhetlek?

[@KrisBarocsi]

@@gergelyzanyi7752 Hali, bocs de FBon csak személyes ismerôsöket jelölök vissza. Ha kérdésed van, csak nosza. Ki vele. 🙂

[@gergelyzanyi7752]

@@KrisBarocsi csak pár kérdésem lett volna hozzád így Thomann-nal kapcsolatban 🙂

[@KrisBarocsi]

@@gergelyzanyi7752 Figy, az lesz a legjobb, ha írsz egy mailt a marketingkukacthomannpontde-re. Csak címezd nekem a tárgyban és talán kezdd azzal angolul, hogy nekem akartál írni. Azt továbbítani fogják nekem. Csáo!

[@eduniversal1298]

Sell me your original pickups