2024 Street Glide Stealth and Legends install

2024 Street Glide Stealth and Legends install - Build Off - EP 3
In this episode we install new Legends suspension and replace stock exhaust with Stealth performance on the 2024 Harley Davidson Street Glide
We are Kruesi Originals, a performance Harley Davidson shop in Phoenix Arizona. We specialize in aftermarket performances parts for Harley Davidson, and American V twin.
We also build high performance custom motorcycles that shred pretty hard. Both owners of Kruesi Originals are professional Harley Davidson stunt riders, and are not afraid to push a Harley Davidson to its limits!
We give custom motorcycles away!
Every $5.00 you spend on our website enters you in a chance to win.
www.kruesiorig...
Join this channel to get access to perks:
/ @kruesioriginals

[@APtwofiddy]

"this feels like a dyna" - kruesi with every new harley

[@christian_esquivel]

This comment feels like a Dyna

[@Throttleoutcustoms]

😂😂

[@hooniganruiz5613]

I mean it makes sense, dynas really do have a certain type of feel. I sold my 09 dyna low rider because it was a fat pig, went back to my sportster, then got another early model dyna. Theyre great bikes

[@AK_fxdb]

" early model dyna "

[@haydenmccracken8721]

I read this comment as he said it lol

[@tonythedrummer777]

nobody: kruesi: it’s like riding a dyna!

[@fighter7029]

I’m all about these longer videos lol

[@kruesioriginals]

Really glad everybody likes them, wasn’t sure. But there was too much good stuff to cut out.

[@andybyrne3542]

"Its only an inch technically, but its a firm inch!" That's what I tell her everytime

[@brandonroberts5043]

Hell yea, 30min plus videos keep’em coming !!

[@kruesioriginals]

Glad you like em

[@hotpocket_636]

These hour long videos go hard.

[@davidhewitt126]

Recently discovered your content, some of the best on KZbin in my humble opinion all the way over in New Zealand

[@kruesioriginals]

Welcome to the channel, and thank you

[@LJSiar]

Florida is a swamp, you better win for all the ol school BMXrs. Just Like moto, Suspension, Brakes then motor, I agree.

[@CritBeatsRaw]

fuckin love this video format man. felt like spending a day in the shop with kruesi and the gang, great info in here too.

[@kruesioriginals]

Glad you liked it. We weren’t sure about the longer content, but there was a lot of good stuff couldn’t cut it out.

[@crooksidewood]

YES.. Love the longer videos!! Feels like I'm watching TV back when TV was good!!! I'm #teamkruesi on this one!! We need a name...like Kruesiaelites or something!!😂😂 Just waiting for Blockhead to drop theirs so I can get at'em in the comment section!!! So glad you guys are doing this!! Respect to both of you guys!!!💪👊

[@kruesioriginals]

😂😂 I love the name. I’ll probably save that for when I start a cult.

[@DanteArnold-k2p]

You can tell this is a real shop by the units of measurement used on bikes lol. I.e. the "peter check" on the cartridge. I love it.

[@rolandschleicher7458]

Another great video, you Trent and June have a fun chemistry.

[@kruesioriginals]

Thanks 👍

[@waden404]

That was a great ending to the vid. Amazing that a bike this size, can do what it does

[@kruesioriginals]

It’s a beast

[@beantownbushcraft]

HELL YAH Lets Get it Kruesi Boys 🇺🇸💥🔥🔥👌🏻☘️

[@LJSiar]

"Fist of rage" haha

[@vicmanjw]

💯 Hell Yeah!!

[@dmac620]

This episode raised the bar on total number of sexual innuendos in one video!

[@josephdefelice3149]

I'm loving this channel! You gotta have big balls to pull up that beast! Lot of adrenaline here!

[@seabass_m]

loving the 30+ minute videos

[@zacharybowden6193]

hearing you scare the shit out of yourself never gets old

[@kruesioriginals]

😎

[@DustinWoloschuk]

haha the ending of this video was awesome watching him get the feel for wheeling this bike... love the super honest reactions without ego!!! kruesi is the shit!!! 😉👍

[@bigfootgarage2201]

HD Bagger build off! I’m team Kruesi the bikes y’all build are wicked and alway preform dope!

[@kruesioriginals]

Appreciate it!!

[@CaffeineThrottle]

I like that pipe. Looks like the bike is going to be a nice functional ride,the best kind. 👏👍

[@lowglide]

Love these hour long videos

[@alpinestar1123]

I love how everything is a late model dyna. Not talking shit 😂

[@kruesioriginals]

Early model Dyna

[@hooniganruiz5613]

Late model dynas arent as good, hes definitely talking about early model dynas

[@jeremyweaver3016]

@@kruesioriginalswhat are your thoughts on the EVO Dynas?

[@Dexatron]

@@hooniganruiz5613 late model dynas are arguably better, they just aren't as sick for stunting.

[@hooniganruiz5613]

@@Dexatron agreed

[@CraigAquilina-fw3nn]

Very sweet,almost looks like you shortened the bike 6 inches,I cant wait to see it finished

[@kruesioriginals]

You and me both!

[@nukestr]

Rode to Cave Creek with my pop a few years ago. I have a brain injury so long rides are rare. I’ll always cherish this ride, even though it felt like I got punched in the face for the next 6 months! Haha 😅

[@71graves90]

damn kruesi, great video

[@kruesioriginals]

Thank you 🙏

[@aromalito63]

Ready for the king of baggers,damn god stuff

[@SleekHobbies88]

Heck ya awesome job, definitely a monster to wheeley!

[@hollynites445]

I like the way everyone gets excited because Harley finally comes out with a stock bike having horsepower in the 90's. Honda has had them for the past 20 plus years 🤣

[@GlidingThroughLife]

Looks and sounds awesome!! Can’t wait to see finished product. Ride safe and take care!🤘

[@rasmusmller2587]

Kruesi for the win. 🏍️😎👍🏻💪🏻

[@gunnysteele1233]

SICK PIPE LEGENDS ALWAYS ROCK

[@pauly680]

Love the in living color reference 😂

[@kruesioriginals]

I love that show

[@MrTwofishes]

Oh damn i got that exhaust on my lowrider and it sounds great.

[@chavezw16]

wheelies on a bagger is always Rad! keep it up and blockhead doesnt stand a chance hahaha

[@NeatFreq]

Fucking love this channel

[@davidfortune5093]

More cowbell baby!!!

[@rossv3436]

Informative af for pipe installs. Thanks for sharing! I keep thinking about my Kawasaki Vulcan 2000 and how it took Harley 20 years to do the same shit. But the new bike you got makes me want another Harley 🤷

[@ryanm8456]

I could see adding a thin metal plate to the underside of the right saddle bag to keep the heat down on the bag and to help with carbon from getting baked into the underside of the bag. Like the looks of the exhaust. I am not sure how I would like the additional 1” height. I like to be more flat footed. Being 5’10” I think i would lose that. Great video. Been watching them all. I have even been going back to view your previous videos.

[@LetItFlyRacing]

New game. Take a shot every time kruesi says dyna

[@tjbummer200]

Was that a men on football reference ? 🤣🤣🤣 damn it I feel old! Kruesi for the win 🫰🌎

[@kennethweisner2301]

"Did you put those spacer f__king things in?" Omg... lol

[@chromesporty4984]

Good one!

[@marcs9547]

Hey, great and very informative video. I have a 24’ Street Glide also. I am also trying to diagnose the slight wobble when you reach higher speeds. Do you have any suggestions on the cause and possible remedy ?

[@ejdtm]

I think these might be a happy medium for you. Arlen Ness Method Performance Bagger Fork Guards For Harley Touring 2014-2024

[@kruesioriginals]

That is a good idea. I do like those. I don’t think they have them, though fork legs are different for 24.

[@ejdtm]

@@kruesioriginals you’ll have to make your own or something similar. 3-D print something. The old dirt bikes had plastic ones.

[@Ben-Jammin91]

Junes a baddie, never knew.

[@thexnewyorker7284]

Great job on those pipes . With no heat shields, how’s the heat by your leg ?

[@georgesmith5624]

Hi Ryan are the touring frames still the same as the 09 up ones,im 6'8" and 385 pounds,my first port of call has been glide pro bushs first and a mid range price shock/spring cartridge setup made them like a well sorted fxr for me

[@HardlyDavidzam]

There might be a fuse you can pull to disable the abs. Or remove the abs sensor from the wheel and the abs system should default to standard braking

[@christopherdunn7757]

Hell yeah

[@smasheddragon]

I was hoping you would do the dirty part... nope, 😂😂

[@Freedompatrol]

You should auction the takeoff to raise money for the build. People would probably give more to support the channel signatures with silver paint pen would bring the price up also.

[@DoRC]

Haven't bothered looking it up but I suspect that knob on the left hand side is also for preload.

[@gunnysteele1233]

REALLY ENJOYIN THIS, LOOKIN FORWARD TO EVERY VIDEO. CHEERS BRO, FR. EASTCOAST CANADA 7AM

[@rumbeard8688]

"Kruesi riding shoes, by Hey Dude."

[@kruesioriginals]

😂😂

[@Mr7O5]

I’m here for the hour videos

[@Sssteve904]

I ran a on-off switch to the fuse panel with a jumper fuse pigtail and then just put a fuse inkine with that to be able to turn the abs on and off when I feel like being able to lock the rear up and whip it around but my bagger does rollers np with abs it just fights you a little on higher speed rollers

[@NJ-Silver-Stacker]

Hey we could use those take off shocks building a 16 dyna

[@Clutch_Kick187]

Unplugging the abs on either end will shut off the abs on both ends, kill the traction control, and the speedometer, and the top speed limiter.. the tach still works though, and so does everything else.. My buddy with a 24 RG was hitting limiter at the drag strip with us, and we unplugged his and found all this out.. Obviously you have a thundermax so your not worried about the limiter, but he has since put his on a rocker switch on the dash to do exactly what you were saying.. On & Off..

[@daddydiesel5889]

Love me some ol’ trapper 42:28

[@Pompomgrenade]

🏴‍☠️ skillfully humble🍌

[@RobertPerez001]

If you made an abs switch, I would purchase the kit. Also I know on the road glides there is a cut out so to speak that NVS audio uses for a bass knob. If you could make that abs disable look factory i would be all in.

[@Clutch_Kick187]

Its really easy to do.. just unplugging the abs on either end will shut off the abs on both ends, also kills the traction control, the top speed limiter, and unfortunately the speedometer, which is the only downfall.. the tach still works though, and so does everything else.. My buddy with a 24 RG was hitting limiter at the drag strip with us a few weeks ago, and we unplugged his abs module and found all this out.. He has since put his on a rocker switch on the dash to do exactly what you were saying.. On & Off, on when you want.. He said he leaves it off all the time now, and just has a speedo app on his phone that is attached to the bars..

[@ericnay7733]

Would this work on a 22 rg you think? Mine came with rdrs and I didn’t want any of it. But I bought it anyway so I didn’t have to wait for a different bike to get shipped in.

[@Clutch_Kick187]

@@ericnay7733 It should.. just unplug it and see.. won't hurt a it at all brother..

[@RobertPerez001]

Correct, but I have a cvo. I don’t want a toggle switch on a side cover. I want a OE+ switch. If I bought a base model sure.

[@Clutch_Kick187]

@@RobertPerez001 His is on the inner fairing inside the glove box..

[@mooseknuckle1908]

Hahaha “I’ve seen it through my fingering eye”

[@johnmacias01]

Looking good gents! It would be nice if we could replace the headlight with a LP6!

[@kruesioriginals]

Stay posted 😎

[@kennethwise7108]

Maybe one of these years the Mo-Co will invent a flywheel assembly that is one piece and not twist thus wiping out the bottom end. Probably happen whenever they make the Tri-Glide factory equipped with an independent rear suspension 😂

[@Cycles_N_Company]

U think a stealth mid length muffler will bolt up and fit the trask assault head pipe? Since u have a ton of experience with both I thought I’d ask

[@kruesioriginals]

Pretty sure it won’t, I think the trask is a smaller diameter at the Collector

[@Seaniesean111]

You should consider developing a set of stunt gloves with material to reduce wear from hand drags. I'm not aware of any manufacturer that has a set

[@jonathankovacs5307]

Cow bells off!!!!!!

[@sarnaldo6602]

So if you want to adjust the preload on the forks you have to do all that work all over again?

[@Arizona_rider]

Did you do time in Lewis in buckeye? I think you punched me in the face. You kinda look like the guy 😂

[@AustinHam]

The neck bearing loose is definitely a factory thing. My buddy has the new Road Glide and says the same thing.

[@robinfilbey]

I’m so jealous I never got a cleaver with my stealth pipe! I think I got it before the cleaver came out, but I really want one!

[@allycat1521]

Ya I got my $$ on Kruise!

[@kruesioriginals]

Let’s goooo

[@claytondunnell]

Thrashin supply makes a relocation bracket for the risers to run risers and bars

[@jumperjosh1732]

"i look to the side and i see my homie Nate"

[@kruesioriginals]

Just hit the east side in the lbc

[@jumperjosh1732]

@@kruesioriginals you were slick with it in the video!

[@mickc4633]

Awesome

[@RoadKingChronicles]

solid

[@hdryderct]

Would love some floorboard spacers that aren't amazon / ebay products.

[@kruesioriginals]

We’re going to make some we just have to get caught up on everything else. But they are coming.

[@hdryderct]

@@kruesioriginalsawesome! I’ll keep an eye out for them.

[@JaySorsby1]

F*

[@Ben_hendrix]

Not saying you want to or that you didn’t know about this. But, you can pop the black pieces off the side covers to make them all white if you wanted.

[@ShaneCasey-lc5eh]

Run a brake line from the rear master directly to the rear caliper, leave the abs unit plugged in, leave the wheel speed sensors in place and plugged in, cap off the rear abs circuit in the hydrologic unit On the new rear brake line fit a inline brake switch or use a banjo bolt style brake switch Now you will have front abs only, no dtc codes or a constant abs light on The abs unit does what it thinks it needs to do to correct wheel speed, but its not hydrologically connected This works for any factory abs bike

[@kruesioriginals]

Or whenever I felt like it, I could just reach down and unplug the front ABS sensor that’s sitting right in front of the gas tank. I can do it while I’m riding. It’s so easy to get to.

[@ShaneCasey-lc5eh]

@kruesioriginals for sure that is the easy way to turn off abs I was trying to offer a permanent solution to delete the rear abs whilst keeping front abs active and also keeping all other systems functioning Looking forward to seeing this build progress ! Love the content 👌

[@Tripskmc]

67 phallic references. 🤣 These are my people. Jk I didn't actually count.

[@kruesioriginals]

😎😎

[@CactusJack252]

That pipe should say "Ryan"

[@CADDYLIFE69]

You should run a blockhead stealth exhaust and see what he thinks when he sees it.

[@EricEanes]

Harley sells You a "Kit," and You have to make it into a motorcycle ! It's a Good Gimmick I guess !

[@gilbertdeluna4558]

Omg r u wearing hey dude shoes😮

[@kruesioriginals]

They were 30 bucks🤷🏼‍♂️

[@Chubbychonies]

Sweet

[@scapegoatxx71]

Do you have any used 16" tubeless rims that will fit a 05' Electra Glide Classic??

[@DanBeanner-zo3ms]

Good luck dude hope you win. Can't wait to see how it turns out. You should to a course on harley drifting.😵🍆🥜🍑 harley.

[@kruesioriginals]

We already did it’s on our KZbin how to Drift to Harley Davidson

[@DanBeanner-zo3ms]

@@kruesioriginals cool ill check it out. Hope see you in sturgis.

[@AustinHam]

"My fingerings eye" 😂😂

[@DoRC]

It's always better safe than sorry but you almost certainly would never harm a brake line by hanging a caliper from it unless the brake line was already damaged. Brake lines are designed to handle thousands of pounds of internal pressure. Hanging 5 lb of caliper off of it for a couple hours almost certainly is not going to cause a problem.

[@SleekHobbies88]

What up do rc😊😅

[@fluffykittynoodles]

It's not for this time, it's for next time

[@kruesioriginals]

You should never hang weight off of a brake line in any scenario whatsoever ever in your life never ever ever ever

[@DoRC]

​@@kruesioriginals maybe so though I'll tell you I've been a professional mechanic for over 20 years and I've probably done it a thousand times and never have a problem. If a brake line looks sketchy then I wouldn't do it but other than that I really don't think it's an issue. If a brake line looks sketchy it should be replaced anyway. The brake lines are hydraulic hoses and hydraulic hoses are incredibly strong. You could probably hang the entire bike off of one of those lines without damaging it.

[@DoRC]

@@fluffykittynoodles what do you mean?

[@Throttleoutcustoms]

Smokin Joe in the corner😂

[@mack_9564]

Ditch the cowbells and run fork gators. Save the seals

[@kevincook7510]

F****** awesome

[@MrMorepower71]

What about geezer inverted forks?

[@connordejac9554]

Why did you go with 14 Heavy duty and not standard ?

[@foolsperspective]

@kruesi would those stock shocks work on the nightster

[@jerrysqwirts9108]

So what can you say about the factory suspension vs legendz. Now that you’ve had both

[@kruesioriginals]

I think the 2024 factory suspension is good. The Legends is better and you can get the bike a little taller, which is always better. It hooks up better and absorbs the road better with the Legends.

[@sixwheelcarlisle8491]

Gonna name the bike: Fist of Rage? 🤔😃😂😁

[@runervus]

I've got a need...... a need for more cowbell