KS0 ULTRA REVIEW: low risk, low reward KASPA ASIC MINER

THANK YOU TO CRYPTO MINER BROS FOR SENDING OUT MY FIRST ASIC TO REVIEW! Here is a link to purchase it, use code "kr00tman" for 70$ off
www.cryptominerbros.com/produ...
In this video, I do an unboxing and initial setup of the ks0 ultra. Then I discuss the potential profitability of the KS0 ULTRA in 1 year.
Time stamps!
(00:00) Introduction
(00:38) Unboxing
(03:04) deployment
(06:17) How I figure out the ks0 kaspa yield after 1 year
(09:58) Adjusting the yield due to the block reward reduction
(12:06) Low risk low reward, my initial thoughts on the KS0 ULTRA
(13:13) Is it a kr00t buy or not?! (spoiler, I think its worth it and I explain why here)
*Note you can just use the psu that comes with it and it will work fine, you will still need to power a fan or put it in front of a box fan.
The Veteran miners 6 pin to ks0 cable (thanks to ‪@TechHustler‬ for sending me one!)
theveteranminer.com/product/b...
The following links are affiliate links (I gain commission when you purchase from these links)
Parallel miner psu kit (more expensive but will power multiple units)
www.parallelminer.com/product...
Noctua pwm fan
amzn.to/4cq8IjY

[@GF_Burke]

I ordered a couple. For the fun and OC later. Plus, we will get other Kheavy coins to mine later. Yes, to get 400+GH, you can't run them cold. I had to turn down the internal fans to around 60%. Mine sits next to an AC... (optimal temp is 67c)

[@kr00tman]

My ks0s are on sedra so I know what you mean. I need to spend some more time with my ks0 ultra to see how it behaves as far as temps go. Will do a short or something on it.

[@edmundodejesusaraujojunior1025]

I have rigs with 10 machines between Iceriver pro and Iceriver Ultra, I'm not complaining about anything, rooting for Kaspa until 2025 to beat the average price of US 1.00 would be spectacular.

[@kr00tman]

@@edmundodejesusaraujojunior1025 that's awesome and here's hoping lol

[@alvydasjokubauskas2587]

Never ROID, unless you got 1st batch when first ks0 was released.

[@kr00tman]

@@alvydasjokubauskas2587 oh you can't beat it for that price!!

[@bretthartmann85]

I wouldn’t put it on cardboard and don’t put a fan on it. It kills the hash rate

[@kr00tman]

So far I'm averaging about 400gh, the temps are about low 60s high 50s

[@RainBitcoins]

​@@kr00tmanI don't believe you.

[@RainBitcoins]

Active cooling hurts your hashrate.

[@kr00tman]

@@RainBitcoins I'll post a short but I have been averaging 400gh

[@blackmennewstyle]

Sadly your review is kinda biased anyway since you received it graciously from a reseller, you are not in the same shoes with someone who bought it with her/his own money, had to go through the sh*ty fake a** "In Stock" process (which is actually "PreOrder" whatever you like it or not) and then all the way through the long awaiting shipment/shipment period 🤷🏽‍♀ Let's not even forget the annoying setup process, firmware upgrade which does not even improve the experience and does not fix issues lol Thanks anyway for your "ads" review, best part of the video is actually here 9:58 lot of very interesting thoughts 👍🏽 Have a great week and keep on mining ⛏

[@kr00tman]

So I am biased and I admitted that, but as far as "in stock process" I could have ordered it np from Crypto Miner bros and other resellers no problem when the coupon came out, as far as setting it up, it was basically the same as the ks0, but ill be doing a setup guide shortly to help people who this is their first miner. The numbers are there because they can't be biased (I say can't because you see the math I have done to get the numbers) so hopefully that helps people figure out if this miner is for them or not.

[@blackmennewstyle]

@@kr00tman Don't get me wrong though the video is good mate, i'm just putting out some real world experience just in case lol

[@kr00tman]

@@blackmennewstyle for sure, and make sure you tell people to never buy spot asic batches always buy the next months batch

[@dankoehler3157]

@@blackmennewstyle They are readily available from many resellers to order and ship out immediately.

[@dankoehler3157]

@@kr00tman Spot purchases are fine when they're in place and released. I run ASICPlug and ASICWholesale and very clearly identify expectations on the timeline of the product.

[@greegp7400]

I have this iceriver hashrate not stable it is meh imo, goldshell is a way better

[@slurpeej]

m too! but I found out that your temps must be 60c on the left and 50c on the right (GUI left and right). I can get around 400 in 24hours.

[@greegp7400]

@@slurpeej i have 49c one and one 35c and device 39c maybe is to cold i do t know but hashrate is a ridiculous

[@slurpeej]

@@greegp7400 try to set the temp higher. You will see the results. It ridiculous hot!

[@greegp7400]

@slurpeej why iceriver need that high temperature? My goldshell ka box have 56c and make all the time 1.6th

[@GF_Burke]

@@greegp7400 Yes. Far too cold. They want to be at 67c.

[@azad668]

Kaspa is scam😂

[@kr00tman]

couldn't you say that about all crypto?

[@papimasfuerte4671]

We shall see

[@TheVeteranMiner]

❤LFG 💪🫡🚀🚀

[@kr00tman]

your cable is FANTASTIC!!!!!!!!!

[@TheVeteranMiner]

@@kr00tman I appreciate ya thank you