Gen 5 Glock 19 vs CZ P-10 C - If I Could Only Have One....

[@hayseed2360]

After being a Glock fanboy sense 1994, I purchased the CZ P-10C and I couldn't be more happy.

[@KSGunGuy01]

That's awesome Hay! Cheers

[@reyleron]

Uh oh. Once you get a CZ, you can’t stop with just one.

[@HonestOutlawReviews]

Lol you beat me to it, I was planning on doing this video next week. Great job and comparison, keep it up!

[@KSGunGuy01]

Thanks brother! I can't wait to hear your take on it, especially with all the gen 5 talk going on. The question becomes, what will you choose! Cheers as always man

[@937-b3o]

Wow, comparing the Gen 5 with the P 10 already. It takes courage to be first one to face the challenge without getting other opinions....Respect

[@KSGunGuy01]

Thank you Messina! I have them both so why not do a head to head? Lol. People have been asking for it so it was the right time. Cheers!

[@cyprusnz2597]

as a totally new shooter I had this exact dilemma. chose the P10 C for its ergonomics, trigger and rear sight (hated a plastic site to be on my pistol). very happy with my decision. In Israel we can only have one gun so it is my every day gun now. To my opinion it is good looking and a great shooting gun. the first mag I ever shoot with it (and third overall!) I had all bullets touching each other!!! it is THAT easy to shoot. LOVE IT. Price in Israel was 870$ for CZ P10 C , and 1400$ for g19 gen 5..... thanks for the great review

[@teewhitt]

I really enjoy your videos. Having to "pick one" is a nice twist and gives a refreshing change to gun reviews. Thank you and keep them coming!

[@KSGunGuy01]

Thank you very much Todd! It's been a lot of fun putting these together and hearing all of the great comments you guys have. Cheers brother!

[@anthonygiovannikarmawisera218]

I would take the CZ P-10c over the glock gen 5.

[@KSGunGuy01]

Thank you Anthony! Me too brother. Cheers!

[@hayseed2360]

Anthony Saylor try and find one to buy!

[@prevost8686]

CZ did more with their first generation P10 than Glock has done in 5 generations of Glocks as far as ergonomics go. The P10 is only going to get better considering how relatively bug-free the rollout of the gun has been. I love my G43 and my Gen4 G19 but they will be my last Glock purchases. My P10 just arrived and I will start running 10k rounds through it as soon as the hurricane is past.

[@KSGunGuy01]

Excellent points Wayne! Stay safe in the hurricane! Cheers

[@veevans01ify]

For all P10C users the night sights are available at Cajun gun works and CZ USA. Got the front sight from Cajun and ordering the rear one today. Thought that I would be happy with the front only but I've changed my mind.

[@KSGunGuy01]

Great info Vincent! Thank you for sharing and cheers

[@ammkad]

Great review buddy. Probably one of the best G19 Gen 5 reviews and comparisons so far.

[@KSGunGuy01]

Thank you very much! Cheers Pali

[@redlew012]

I think it's great! you weighed all your options and made an honest choice. Your money matters and cz gives you more for it. I was a huge glock fan boy. Then Mr. Glock says hes not too concerned about the 2nd amendment and his consumer market because of his contracts are with law enforcement and military. So I started looking for other options . And I must say this is a very good one. as well as the canik. The souped up canik. (Same price range and you get even more.) Good job honest review thank you. I will subscribe.

[@MilsurpMikeChannel]

Yea, I would probably take the CZ also between the two. Good review.

[@KSGunGuy01]

Thank you very much Mike! Cheers brother

[@timothyhaymond5052]

I have great respect for the "normal guy" that makes professional and informative videos...Thanks. I haven't decided which of these to get, but this really helps! I'm a subcriber now!

[@KSGunGuy01]

Thank you very much Timothy! Glad you're enjoying. As for the two... I recommend both! Great shooters and well built for sure. Thank you again and cheers!

[@timothyhaymond5052]

KSGunGuy 01. Could you give in a nutshell a list of the things that put the CZ P10c on top? Also, with good sights, would the glock be back on top or would you still take the CZ? Thanks!

[@KSGunGuy01]

Great ergos, awesome trigger, excellent fit and finish, and decent sights. Tough to say on the Glock vs CZ with good sights on the Glock... for me, probably but for many, probably not. Cheers!

[@charlesrafaelmoran2615]

I am trying to locate the CZ to purchase and although I have never owned a Glock - I agree with your comparison results.

[@KSGunGuy01]

Thank you very much Charles! Hopefully you'll find one soon. Cheers!

[@GB58777]

Nice video I gave my 19 to my daughter. P10c is one of my favorite carry pistols.

[@InSightFreedom]

Winner winner chicken dinner. Good honest personal assessment.

[@KSGunGuy01]

Thank you very much! Cheers InSght

[@ajfornes6728]

I’m just getting introduced to the handgun market (have a couple of rifles) but the gen 5 Glock 19 is going to be my pick. It’s very visually appealing to me and it has everything I want and need. Cheers everyone watching!

[@KSGunGuy01]

It's a great gun indeed! Thank you and cheers AJ!

[@sig3ldunc4nI]

I went with the gen 3. I would’ve went 5 but I really don’t care for the front serrations on the newer models. Which did you end up getting? (out of curiosity) I have both the 17 & 19. They’ve never had a malfunction and just run as intended. Wouldn’t mind having the CZ P10C though. I’ve heard a lot of good things about it and the trigger is solid out of the box.

[@ajfornes6728]

@@sig3ldunc4nI I ended up going with the Glock 19 gen 5 (the batch that didn’t have the front serrations yet, because like you, I didn’t care for them haha) and have since expanded my handgun collection. My absolute favorite right now would definitely be the Smith and Wesson M&P 2.0. It feels better in my hand than the Glock does. I’ve heard really good things about the CZ p10 c, but sadly don’t have any experience with it.

[@mylifechoices]

Another excellent installment! I was a huge Glock fanboy in a previous life... Unfortunately for Glock, there are far too many better options available these days!

[@KSGunGuy01]

Well said and thank you mylife! I too was a fanboy once upon a time but with so many awesome options out there, the choice is so much harder! Cheers!

[@dragunmane3029]

Give it time. Your sorry ass will go right back to the glock 19. period LOL

[@mylifechoices]

Not in this lifetime fanboy! lol

[@fuloran1]

Totally agree. I mean really, any high end maker has a very reliable long lasting lineup, it comes down to features, and man the CZ delivers over the Gen 5

[@phoon32]

Same here my friend. I have the cz p 10 s. I love the sig P365 platform also💪🏿💪🏿💪🏿

[@fumasterchu12]

I have to agree with you, since I just bought the P10C instead of the Gen 5 Glock. I could have gotten either one but chose to go with the CZ, and it is really nice. I will probably still get a Gen5 Glock but it might be the G17. Great video as usual brother!

[@KSGunGuy01]

Thank you Fu! I think you made a great choice with the P10. That said, the 17 has impressed me, especially with the lack of finger grooves. Makes the fit much better. Cheers brother!

[@randystevens6302]

Bought my CZ here in Connecticut for 470 plus tax. Glock is a reliable, simple platform and I own more than one however there is nothing special in this new offering that would make me want to add another to my safe. I agree, the CZ is the better of the two.

[@KSGunGuy01]

That's awesome Randy! I agree, Glocks are great but the Gen 5 is a bit uninspired. Glad you are enjoying the CZ! Thank you and cheers

[@jameshill2015]

I love my P10 BUT I did have a couple issues...new out of the box I was disappointed w the trigger everyone RAVED about..yes..it did get MUCH better after 300-500 rounds. The mag release was pretty damn stiff.. slightly over compress from both sides little by little until it's perfect for you.. The trigger safety bar...ugh..on mine it would not go flush to the trigger face and the squared edges were noticeable..this was easy..an Emery board..I took off just enough for it to be flush to the face when pressed..NO MORE..then rounded the edges..The only other quirk was really not a problem for me but many have complained that the slide release/lock is hard to press to release, personally I was taught to rack it back to avoid rounding out corners on the frame and slide release itself so I slingshot it if you will however I am growing fond of the auto feed design of this gun, slap the mag up in there and it auto chambers the fresh mags new round right in there..hope this helps some of you. and yes i took the Emery board to the factory stiples and softenedthe tips ever so slightly..to your taste..it is now PERFECT FOR ME..and it didn't cost more than a nail file to fix!! AWESOME PISTOL!!

[@KSGunGuy01]

That’s awesome and thank you for sharing James! Glad after some work, it’s doing well for you. Cheers!

[@jsj297]

I was a Glock fan boy since gen 2 days. I am now a walther fan boy. No comparison, these new polymer, striker fired guns are all superior to Glocks imo.

[@KSGunGuy01]

Thank you for sharing jsj! Walther are great guns indeed. Cheers!

[@spydergs07]

Walther isn't bad but I hate how dirty they get so fast.

[@mmalave71]

spydergs07 Yeah, I'll take a PPQ over both of these.

[@jsj297]

spydergs07 I own 3 walthers, and they get no dirtier faster than my Glocks, berettas, Rutgers, etc. that's the strangest criticism I've ever seen about a pistol.

[@13Hangfire]

PPQ for sure!

[@vudoodaddie]

Cz is the better bang for buck. Plastic sights? Really?

[@KSGunGuy01]

Lol. Can't argue with you on that Vu! I agree, why have they not learned to at least make steel sights standard! Thank you and cheers!

[@Ratio21]

I think they are just plastic to make it easier to remove them for real sights..., ask 10 people what sights you like you will likely get 10 answers.

[@KSGunGuy01]

Excellent point Ratio!

[@Rwcheshire]

Yes really. The CZ P-10c is an awesome flat accurate shooter. Trigger is awesome.

[@miophx8283]

I agree!!! Plastic sights? And they didn't do enough to change or improve the Gen 5 anyway. And they still have the stupid hump in the heel of your hand. Glock has the worst ergonomics of any pistol I've tried. The one think I do like is that the Glock is just a little smaller overall, with the same barrel length and very light weight. Glock does a good job with that.

[@thelos8093]

The hole in the front part of the grip, did it bother you in anyway shape or form while shooting? I heard it has sharp edges and you can feel it with your pinky finger

[@KSGunGuy01]

Thanks for the great question Carlos! It did at first and I talked about it a bit in the first Gen 5 vid I did. The cutout seems to have softened up a bit however and I don't notice it any more. Thank you and cheers!

[@oldguyrimfire]

Have a gen 2 23 with the same cut out. Pearce grip enhancer should fill the void if it bothers you.

[@mylife8441]

I have a question about what would happen if I just went ahead and bought a cz p10c for my first gun in about 20 some odd years. The last handgun I owned was a Taurus 9 mm. That was back in the late 80s.

[@KSGunGuy01]

It would probably be on a Gen 5 or 6 by then and hopefully any kinks would be ironed out! Thank you and cheers My Life

[@paaustria]

Another thorough review and comparison. Well done.

[@KSGunGuy01]

Thank you very much SoCal! Cheers

[@993isgawd]

Thank you for your well-balanced review. And despite being very much a Glock guy, I tend to agree with your final choice. The P-10C is just a better updated 'Glock' than the authentic product is. I admit that I was a bit put off by the CZ for copying the controls of the Glock as much as they did, but the gun shoots pretty well for me. The only true downside for me is that the CZ is taller, and if I were considering it as my EDC gun (I'm not) I would have concerns about its grip potentially printing more than a G19 would. Similar issue that I have with my VP9, a gun I really enjoy shooting, but won't use for anything other than as a range toy. I like a lot of things about the new Gen5 design, and I do think that its trigger is slightly better than the usually sloppy, creepy Gen4 mechanisms. The elimination of the finger grooves is a huge plus for me since I've long felt my Gen2 G19 has been the nicest of the bunch prior to the Gen5 guns. The DLC coating is a plus if it really does mitigate the rusting issues that us Gen4 owners have been saddled with, though I wish it was less slick (or Glock had sharpened up the slide serrations). Plastic sights don't bother me, since I've always viewed them as placeholders. Their 3-dot options would be wasted since I prefer straight-8 sights. So it's no biggie that plastic remains on the base configuration. But what others have posted about Glock otherwise not doing enough, well I think that there's a lot of credence to that that line of thinking. And I do think Glock needs to get more aggressive on their price points. They're no longer the bargain brand that could, going against SIG P229s, HK USPcs and spendier types. The 1990s is two decades ago. Plus Glock is probably not going to make it in 40S&W or 357SIG, at least not with only 2 cross pins and no place to located the third without potentially messing up the action of the ambi slide stop. Guess I must remain happy with my Gen4 G23 EDC.

[@KSGunGuy01]

Thank you very much for your thoughts 993! I agree that the P10, in short, is a better upgraded glock. That said, I too like a few of the changes and consider them welcome. I agree the slick slide deserves better serrations to compensate. As for the sights, I agree they serve as placeholders for most, but I think they should have at least made the steel sights standard for those who don't want to or can't change them out. I think that would have helped justify the price a bit more. Interesting about the 40 and 357 Sig... I hadn't thought of that but I bet you are 100% correct. Thank you again and cheers!

[@ieeetransoncircuitssystemf1101]

haha, just bought a P10C from you guys yesterday, after watching this video. :)

[@CZFanGrrl]

I recently managed to “turn” a dyed in the wool “Glock all the way”, Sig, Kimber, 1911 buddy into a CZ guy AND he’s selling his Glocks to buy an additional CZ, the TSO. Well heck, it wasn’t a hard sell. Loving the reviews KS!

[@KSGunGuy01]

That's awesome! Once you go CZ, it's tough to go back. Thank you and cheers!

[@Baldcurious]

Still don't have my p10c but handled and dry fired both guns and just based on that , I'd pick CZ as well.

[@KSGunGuy01]

I think you will love it Bald! Can't wait to hear your take on it. Cheers brother!

[@paulh6101]

HB Industries sells a drop in trigger for the p10c. Just a heads up for those who get blisters on their finger from the trigger. Sold mine because of this issue. Looks like I'm buying another p10c, just bought the new trigger.

[@KSGunGuy01]

Great to know Paul! Thank you for sharing brother. Cheers!

[@scottf.3808]

Good comparison vid as I just think Glock is charging too much for you get these days with guns as it is a great gun but behind the times with additions on it and priced at high end and they still have plastic sights as come on....Good info and vid...Good stuff...

[@KSGunGuy01]

Thank you very much as always Scott and I agree brother! Well said. Cheers!

[@garysarratt1]

We tweak and add aftermarket parts to virtually every weapon we buy, based on our individual preferences. I, for one, would like a Glock with great sights and whatnot, but they cost enough already. I would rather procure and add things myself, than pay $1,100 dollars for a new pistol.

[@KSGunGuy01]

Well said Gary!

[@MrSheldonjohnson]

I agree with your assessment, 100%!

[@hawkins71]

I was not overly impressed by the Gen 5 offerings. I had the opportunity to shoot the G19 and G17 and was not moved by the way they shoot, it felt like pretty much the same. I really thought the removal of the finger grooves would make the G19 feel better in my hand, but alas it still felt odd (an undercut trigger guard would have assisted greatly).

[@KSGunGuy01]

Thank you for sharing Karasu! A lot of people have said the same thing and were equally not impressed. They did improve the undercut, but I agree, it's hardly noticeable. Thank you and cheers!

[@Poconomountaingunguy]

Trying to decide now if I'm gonna get the CZ P10F or the new gen 5 Glock 17, having a really hard deciding.

[@jmoore9382]

So far enjoying the 19 gen 5 but I would like to try cz

[@KSGunGuy01]

I recommend it J! CHeers

[@reyleron]

You might not go back.

[@gregmccoy1020]

CZ all the way..I gave my g19 gen 4 to my son..shoots WAY better than Glock. Can't wait for p10F

[@KSGunGuy01]

That's awesome Greg! The CZ is a sweet shooter for sure. Cheers!

[@jfscotch]

Nice job, KSGunGuy. I am a bit underwhelmed by this offering from Glock. I'll stick with my Glock Gen 4's, the finger grooves never bothered me anyway. I can't believe we waited all this time for this release. So many other companies are just being more innovative these days.

[@KSGunGuy01]

Well said John! I too am underwhelmed. The changes aren't bad but with so many other options out there... at least give us steel sights as standard! Lol. Oh well. Thank you and cheers brother!

[@BigJohnsonGG]

Great Vid Brother, I would take the CZ P10C as well, hands down! #CZLIFE Indeed, Carry On

[@KSGunGuy01]

Thank you Big J! Cheers brother

[@KevlerJ]

Way to go! Thank you for doing this one.

[@KSGunGuy01]

Happy to do it Kevler! It was a fun head to head to film. Thank you and cheers!

[@weichao1333]

like the way you talking , and great content btw. subscribed

[@KSGunGuy01]

Thank you very much! Cheers!

[@jackomalley3687]

The CZ has a beefier slide, the barrel chamber is much thicker, and the rails on Cz is also more stout. I thiunk the CZ can stand up to more abuse

[@KSGunGuy01]

Great points Jeff! Time will tell but I think you are on to something. Thank you and cheers!

[@jackomalley3687]

But now that the Gen5 Glock came out, I am compelled to buy one

[@KSGunGuy01]

Might be worth a try!

[@11Shaa]

CZ frame is now know to crack under the roll pin. Google that.

[@cjmoore7240]

I am a HUGE CZ Fan Boy. I do love my Glock Gen 3 17 (can't get Gen 4 or 5 because of CA Gun Roster Ban). You can't go wrong with either. As always great review. BTW, I put my Glock back to stock with the exception of the polishing I did for the trigger and safety plunger and an extended magazine release button.

[@KSGunGuy01]

Agreed CJ! Well said brother. I think the trigger job can definitely get the job done. Cheers brother!

[@shawnm9626]

Cz for me 2! I just put night sights from Cajun on mine, they are pretty good imo. Great detailed video as always dude

[@KSGunGuy01]

That's awesome Shawn and glad to hear some good feedback on the sights! Thank you as always brother and cheers!

[@warpartyattheoutpost4987]

Thanks for the great video! I've been tryin' to decide which one to get and this REALLY helped!

[@KSGunGuy01]

Thank you very much and glad it helped! Cheers

[@davidelizabeth4933]

CZ gets the win. Gen 4 and 5 Glocks come across to us as pistols with afterthought "upgrades". They don't have an overall cohesive design like the Gen 3s.

[@KSGunGuy01]

Well said David! The Gen 3s are great. If only they all came with the RTF frame, they would be perfect in my opinion. Thank you and cheers!

[@reyleron]

I like Glocks but like CZ’s more. The thing I don’t like about the Gen 3 Breech Failure was a turn off. Gen 4 did better.

[@MDpolo]

KSGunGuy would you pick the CZ P10-C over the Glock 19 FS? Thanks!

[@KSGunGuy01]

That's a very tough question! I truly believe you are doing fine with either. The only thing Glock has over CZ for the most part is aftermarket support. Other than that, just grab one and go make some noise! Thank you and cheers!

[@KSGunGuy01]

My pleasure!

[@MatteoSixSeventyFour]

Another fantastic head to head run through. And even without my personal bias toward CZ and against Glock. (Which is nothing secret) I still would have gone with the CZ. Great job, and a definite thumbs up from me. As usual...

[@KSGunGuy01]

Thank you very much Matteo! I just love the CZ and it's no surprise you and many others feel the same way! Cheers brother

[@immckeeuc]

Great video first time viewer on your channel and new subscriber.. I agree with your choice thou they are both great guns.. have had several Glocks switched to M&P's a few years back & actually liked them better than the Glocks.. have now switched again to Walters PPQ 5 Match, a P99 and a PPS all 9's have to say like then best of all fantastic triggers , again just my opinion.. am a recreational shooter at out local indoor range so limited in experience .. hopefully you read these comments, I noticed you were wearing what looked like prescription glasses .. Am post 70 so eyes have faded to say the least , am left eye dormant currently have left lens set @ 20 inches and right for distance.. seem to work ok, but am considering going with top 1/3 bi-focal @ 20 in and bottom for distance ..would you be kind enough to share how you have your eye wear set for shooting if any thing other than your standard prescription.. thanks appreciate any insight you might wish to share..

[@KSGunGuy01]

Mat, welcome to the channel and thank you for the thoughts and question! Glad you found Walther... the PPS is my go to carry. Great guns for sure! As for the glasses, I am not eye dominant which means neither of my eyes focus on the target completely. It's a weird effect but I am used to it. My glasses are a normal prescription and relatively light so I can't offer much insight there. Maybe some other commenters will have suggestions for you. Once again, thank you and cheers!

[@immckeeuc]

Thanks appreciate the quick get back.. will probably stick with what I have for now seems to work pretty good no sub for range time.. the PPS is my carry I have small hands,am left handed the single stack seems to allow my grip (from the old school) where I don't shoot low right ... the PPQ and P99 double stack I tend to shoot low right .. anyway appreciate your videos thanks.. Mat M

[@KSGunGuy01]

My pleasure Matt!

[@Scott079]

Have you ordered or have you seen the HBI trigger for the CZ yet

[@KSGunGuy01]

Thank you for the question Scott! I sure haven't. I actually like the CZ trigger as is so no plans to change it right now. Cheers!

[@Scott079]

KSGunGuy 01 I don't plan on changing mine either but for 65 bucks which is pretty cheap for an aftermarket trigger it supposed to get rid of a lot of the take up, and that's pretty damn good

[@KSGunGuy01]

I'm looking forward to seeing some reviews on it. Hopefully it will be awesome!

[@PracticallySquared1]

Good video. I’m waiting on a p10c suppresser ready with a rmr cut from cgw. The guns supposed to be in, in the next few days then they have to do the work. Hopefully I’ll get it soon.

[@KSGunGuy01]

That's awesome! Looking forward to your review. Cheers brother!

[@mikeruthantisdel5679]

How do you guys keep up with the latest models yet still compare new guns with each other. How do you pay for or just keep on buying guns?

[@Sanctified_Leather]

Just bought one in FDE and I am picking it up this Friday . It was very hard to find in my region and they had one in stock and pulled the trigger fast! We went to buy a Walther PPS M2 LE model for my wife's Carry rotation , but they had the CZ and my wife made a Sacrifice for me . Please don't disappoint me CZ or I'll owe her more then a Walther . I will owe her Two Carry guns 😂 Thanks for all of your videos and reviews KS , Have a Blessed Tuesday and Carry On.......... 👍 👋

[@KSGunGuy01]

Congrats Steven! I think you will love the P10 and your wife will want one too! Thanks for watching and cheers as always!

[@rich4150]

Nice comparison KS!

[@KSGunGuy01]

Thank you Rich!

[@RyanMiller3039]

Is the new width of the 19 simply because of the magwell or is the entire width now bigger?

[@KSGunGuy01]

Thank you for the question Ryan! It's more because of the slide lock/release. It's on both sides now and they made them just a bit larger. Thank you and cheers!

[@brent__earl]

What about the Gock 19 gen 5 MOS vs the CZ? I'm about to buy my first gun, it'll be mainly for home protection. Also considering the M&P 2.0 4 inch barrel, Glock 43x, and Sig p320 4 inch. Winner?

[@KSGunGuy01]

In my opinion, remove the 43x and everything else on the list is a contender. The winner is which one you shoot the best. Thank you and cheers!

[@ShotgunMikey]

Excellent video ! I'll have to try one of them p10c out so I could not say witch one I like better.

[@KSGunGuy01]

Thank you Mikey! I highly recommend it and would love to see your take on it. Cheers brother!

[@wessowell6616]

I would agree that I enjoy shooting my P10C more than I do my Gen 5 19 MOS but that extra bit of grip length along with that super aggressive grip texture always snags on my shirts causing it to print so I’m not confident carrying it. I think even without the aggressive grip texture the extra length alone would cause a printing problem with my body type. I wish they made something between the P10C and P10S 😂…. P10CS?? Lol. The sweet spot for my is a Gen5 with a SLR magwell so I get that bottom shelf or I just carry my MR920. Great vids man!

[@cz1always608]

Well I would like to know at 10.000 rounds would the CZ hold up to the Glock ... own a few Glocks looking at CZ though. For 500 bucks it's nothing to fret about . Have seen a few videos with the CZ having issues at the 5000 + mark Again those Are KZbin videos and not enough first hand to judge it .. thanks good video. Would love to see something on the 8 to 10000 shoots time frame , when you get there . Thanks again

[@KSGunGuy01]

Thank you CZ! I'll try to keep everyone posted on the progress. I've heard about a few issues as well but mine seems to be good so far. Cheers!

[@vallejopnw]

Thank you ALL. Especially the KZbin channel! Bought my first handgun Friday (9/20/19) and went with the CZ P-10c with the threaded barrel. Can't wait to get it!

[@kyleeaton2717]

Is there a reason why trigger guards always have that point at the front and aren't just rounded?

[@KSGunGuy01]

Great question Kyle! I think some people use that as a finger rest while shooting so maybe it keeps the finger locked in place. That's only a guess so take it for what it's worth. Thank you and cheers!

[@cmr7217]

With a HB industries trigger install in the p10c its untouchable!

[@timothyhaymond5052]

Would you consider comparing the CZ p10c and the CZ 75 compact? Cheers!

[@KSGunGuy01]

Thank you for the suggestion! If I can get a hold of a 75 Compact, I’d be happy to do it. Stay tuned! Cheers Timothy

[@channelcatchaser9426]

Great review. I have to hold both of those pistols to see if i need to upgrade

[@KSGunGuy01]

Thank you Channel Cat! Both are great. I'd be interested to hear which one you'd go with. Cheers brother!

[@Alex54321]

The new finish isn't as good. I shot 150 rounds through my gen5 and I have significant wear on the barrel

[@KSGunGuy01]

Thank you for sharing Peach! I am starting to notice some unusual wear as well and I'm only 300 rounds through the 19. It's really frustrating for sure and I wonder what Glock will say about it (if anything). Cheers!

[@veevans01ify]

Peach Brick wow that's not good. I have 400 through my P10C and see very little wear. Heck I just broke down my Gen 4 Glock 19 and have very little wear after running over 800 rounds through it. Thanks for the info.

[@Alex54321]

Echoing your comment my gen 4 has very little wear with a similar round count as well. The finish on the barrel reminds me PSA Nitride on the freedom uppers. Seems cheaper when compared with previous generations. The slide shows no wear marks on a positive note.

[@KeanonGilliamSlang369]

Really great comparison. You just made my decision tougher lol.

[@KSGunGuy01]

Lol. Glad I could help Keanon! Cheers brother

[@brianonthego]

3100 subs...awesome job. Do you work at that range?

[@KSGunGuy01]

Thank you G17! I sure don't. Cheers brother!

[@brianonthego]

KSGunGuy 01 My bad. It sure is nice of them to let you review all those nice pistols there.

[@KSGunGuy01]

I got lucky with those guys. They treat me way better than I deserve!

[@brianonthego]

KSGunGuy 01 I am truly sorry for making that assumption. I would love to see a gen 5 up close...let alone shoot one.

[@KSGunGuy01]

No worries brother! I spend more time there than I should. They've threatened to hire me and make me clean the range. Cheers!

[@davegass1650]

Hi KS. Hope you are doing well. I have a question and wonder if you can help. I have a Canik tp9sf which has been really good. I can trade it for a new Ruger american pistol 9mm. Which I also like. What is your opinion ? Thanks.

[@KSGunGuy01]

Great question David! The Canik has a major recall on it right now so you may not be able to trade it. That said, I hear the Ruger is pretty good but a fair amount larger I believe. I recommend handling one and maybe even shooting it to see how it works for you. Thank you as always and cheers brother!

[@davegass1650]

KSGunGuy 01 Thanks for your response. Totally appreciated !

[@KSGunGuy01]

My pleasure!

[@lemuelaikems6083]

is that just the Canik tp9sf or all of the models?

[@davegass1650]

Lemuel Aikems All of them.

[@michaelnorkus5592]

Hey! Centerfire! Nice, I'm coming in to purchase one of these!

[@KSGunGuy01]

That’s awesome!

[@RepentorPerish77]

I'm not a Glock hater in fact I own the Glock 19, I like the gun and it will always be part of my collection..however my Sigs are my favorite....The P226 Legion is awesome, but to compare a similar size gun, I just picked up the P320 x-carry.....if after 500-1000 rounds and it proves itself...my Glock may truly become a safe queen.....that X-Carry is a FANTASTIC gun....the most accurate striker fired pistol I've ever shot

[@dantalksfootball1]

I have a membership at Centerfire and am currently on the waiting list for the P-10 can not wait to get one.

[@KSGunGuy01]

That’s awesome about Centerfire! Hopefully they will see some more P-10s soon. Thank you and cheers!

[@apsjiml]

Would you say the finish on one or the other is more durable or better?

[@KSGunGuy01]

Very good and tough question. I may have to give the edge to the CZ though. Thank you and cheers!

[@khmergodhobbies]

I love my g19 gen 4, but i wished the grip was slightly thinner for smaller hands since they have so many different grip extensions

[@ronjohnson4157]

Great review. Based on what I see here Glock missed the opportunity to knock the competition back on its heals again with a more value added feature rich gen5 gun. An analogy would be similar to purchasing similar cars...one has luxury items, the other does not, yet the luxury car costs less. And your choice is....?duh. However, never under estimate the salesman...as in Glocks marketing department, the best weapon they have

[@KSGunGuy01]

Excellent points Ron! I think that's a great analogy and agree that they are really relying heavily on the marketing department now. Thank you and cheers!

[@frankovera7553]

To the reviewer in the video, or someone else with the experience to answer my question. Whats the best trigger of the CZ 75 SP Shadow Orange then the CZ P10 C? I heard the Orange have a insane trigger but have a higher price point. Is there any significant difference, or are they equally great?

[@KSGunGuy01]

The Shadow Orange will have a much better trigger, though yes... a higher price point. Thank you and cheers!

[@gkellz8616]

I agree! CZ made an amazing pistol and the price point is on the money

[@Hunter_Family_2024]

With rubber Talon grips, the CZ all day long however, stock for stock out of the box, the Glock 19 GEN 5. I have the GEN 5 G19 with the front serrations, and no cut out in the magazine well, and have shot the CZ P10c, roughly 150 rounds, I shoot both very well. The CZ's stippling is just a bit too aggressive for my taste, its even more aggressive than my M&P 9 2.0, which is a very nice shooter.

[@davegass1650]

Do you have any experience with the Berreta 92fs ? I want to buy a metal frame gun. They are for sale at a local gun store for $499 with a Berreta gun bag and an extra magazine. I have been saving for the Sigsauer p226 with night sights at the same shop for $ 650.

[@KSGunGuy01]

Great question David. I like the Beretta but prefer the Sig platform. That said, 499 is a good price. Thank you and cheers brother!

[@davegass1650]

KSGunGuy 01 Thanks KS. I have shot over 30 different guns in the last year. Many of my friends have incredible gun collections and because I am a new shooter they are always bringing 4 different high end guns to the range for me to shoot. Kind of like wanting to show off your new hot girlfriend. Lol ! So far my favorite has been the Sigsauer p226 legion sao 9mm. But it is not on the Massachusetts compliant list and is pretty expensive. Most of my friends are single with no one to answer to. I have been happily married for 27 years. I would like to keep it that way. Lol !

[@KSGunGuy01]

Lol! Yes, you have to have priorities for sure. It's a bummer it's not compliant so maybe the Beretta is the way to go. Cheers!

[@davegass1650]

KSGunGuy 01 The regular sigsauer p226 is Massachusetts compliant. CZ is also not Massachusetts compliant. We will see. When I have the guns in my hands I think that I will know.

[@KSGunGuy01]

Well said David! Keep me posted

[@gerardj.medvec55]

Good choice. Love my P10C !!!!

[@KSGunGuy01]

It's a great gun for sure Gerard! Thank you and cheers

[@petespurgeon9094]

Another great reveiw, glock has the aftermarket,cost important decider.

[@KSGunGuy01]

Thank you very much Pete! Agreed, Glock has the aftermarket but it may take a while for Gen 5 support. Cost is definitely a factor. Cheers brother!

[@Reloadingfromthehotpot]

I ended up buying the CZ P10C for my edc over the Glock, very happy with my choice. Good video

[@KSGunGuy01]

That's awesome! It's a fantastic gun for sure. Thank you and cheers!

[@tjc20]

I own a Gen 4 G19 and now the CZ P-10C. The CZ wins in my opinion due to the much better trigger, the metal sights, the front cocking serrations, additional ambi controls, and grip ergonomics. Glock needs to step up its game. It's falling behind its competitors now.

[@KSGunGuy01]

Well said Tj! The CZ really shines and agreed that Glock could use some serious overhauling. Maybe someday. Thank you and cheers!

[@sentinel8711]

Without question the Cz P 10 C

[@KSGunGuy01]

Thank you for the comment taz! Cheers

[@rotorwind177]

I'm glad you finally came to your senses lol

[@KSGunGuy01]

Haha! I am stubborn but eventually I learn. Thank you as always Rotor and cheers brother!

[@DannyBFishing]

Can you do a Gen 5 vs Walther PPQ M2?

[@KSGunGuy01]

Great suggestion Danny! I'll see what I can do. Thank you and cheers!

[@DannyBFishing]

KSGunGuy 01 Thanks! Trying to decide between those two for my next pistol. Keep up the great videos!

[@KSGunGuy01]

Will do Danny! In the meantime, do you have access to a rental range? If so, I highly recommend trying them both out as they are dramatically different in terms of ergonomics and shooting feel. Cheers!

[@DannyBFishing]

Havent got ahold of the Gen 5 yet but i like the PPQ a lot!

[@kanpekikonton5074]

I love my PPQ M2! Wond up choosing it over the G19. The glock had a weak ejection and the grip angle feels off in my hands. Had to tilt the nose down to get the sights to line up.

[@parabellum3205]

CZ p10c, definitely agree! No apologies!

[@KSGunGuy01]

Awesome! Thank you and cheers Parabellum!

[@Docholidey]

I have always prefered CZ to glock though i own both,, I replaced my G19 with the the P07, no regrets, i haven't tried the P10c yet,. As far as glocks go I still have the G26 and it is a great firearm and i have no intention of replacing it, well until cz comes out with a subcompact.

[@KSGunGuy01]

That's awesome Lane! The p07 is a fantastic gun for sure. Thank you and cheers!

[@veevans01ify]

Great video sir. Thanks.

[@KSGunGuy01]

Thank you very much Vincent! Cheers

[@CalvinKleinManzano]

im a glock guy but i'll take the cz p10c. i hate the curvy cut on the magwell and no serration. so dissapionted

[@KSGunGuy01]

Great thoughts CK! I agree 100%. Thank you for sharing and cheers!

[@ert-7112]

Thanks for the video, I agree with you, both great, CZ P10C for me, better ergonomics, better quality and a couple of $$ cheaper

[@KSGunGuy01]

Well said ER! Can't argue with that at all! Cheers brother

[@donaldweber7636]

P10C ergos are horrible. Doesn't point naturally, feels like a cheap toy, trigger is squishy, grip too small. Glock has the most natural fit in my hand of any pistol. Why buy a copy when you can have the original.

[@josephguerra8763]

Haha--- Obviously you haven't shot the P10.

[@donaldweber7636]

Handled a couple in stores. Like the P320, wasn't worth future consideration.

[@veevans01ify]

Donald Weber I have a Glock 19 Gen 4 and will keep it. But I think that if you get a chance to shoot it you would consider purchasing it. I currently carry my P10C. I have shot both side by side more than twice and must say that the P10C is the better pistol. I held a G19 and G17 Gen 5. They feel a little better than the Gen 4s but the trigger and the ergos of the P10C tops it.

[@toynazi]

The M&P compact 2.0 is on the way. other than that the CZ P07 is great!

[@KSGunGuy01]

That's awesome Keith! Thank you for sharing. Cheers!

[@Interpolation1911]

I love everything on my P10F but for some unknown reason, if SHTF, im grabbing my 19X. Is it because the reliability has been proven?

[@antilaw9911]

Reliability proven on p10c also. Cz been around longer than glock by at least 10 years.

[@gagunshooting803]

I totally agree...if I were to choose between these two out of the box I would definitely go with the CZ. The Gen5 is a big disappointment...and you know how I feel about my Glocks. It's bad that clone Glocks guns are beating out the original Glock...but the truth is the truth. Glock needs to get with the times and listen to what the customer wants. Who ever the clueless designer is needs to come talk to start watching KZbin...what we want is right here and very simple to do.

[@Scott079]

Gerald Weldin I don't think Gaston knows what KZbin is

[@gagunshooting803]

Scott Pochini I wish someone would let them know...maybe I'll contact them and tell them.

[@KSGunGuy01]

That really says something that you would opt for the CZ Gerald! I know you are a big fan of glock. But, truth is truth. Thank you as always and cheers brother!

[@KSGunGuy01]

Well said!

[@absolutelybarbarictv5638]

CZ p-10c all day. I was hitting clay pigeons 30+ feet away with mine out of the box. Came with a threaded barrel too!

[@KSGunGuy01]

Right on! Thank you and cheers!

[@ericcarr7557]

How about the CZ P10C vs. HK VP9?

[@opmike343]

I absolutely CANNOT believe that with all the new competition in the polymer handgun market, with all of the popularity in Glock grip modifications, that Glock did absolutely nothing to address the majority of people's complaints about the grip. Getting rid of the finger grooves should have been a minor part of a full grip redesign. Doesn't make any sense.

[@KSGunGuy01]

Well said OP! A lot of people have said similar things to your point. These changes Glock made are at best, minor. Thank you and cheers!

[@ivtec3]

How far away were you shooting? That’s damn accurate

[@KSGunGuy01]

Thank you very much! Somewhere between 7 and 10 yards for all of my videos depending on the guns and my mood. Cheers!

[@nikisigx5381]

I'm not a Glock person it just doesn't feel right in my hand. Love CZ's. I wonder what your thoughts are on the P320X5? Nice video. Subbed.

[@KSGunGuy01]

Thank you Niki! The Xfive is great. I have several videos out there on it. Cheers!

[@David_Creyke]

CZ makes great weapons but for polymer I don’t think I’ll ever move off Glock 17 and 19.

[@KSGunGuy01]

I completely understand! Thank you and cheers!

[@truckn_n8key557]

Id like to see fn 509 vs. the cz p10 c

[@KSGunGuy01]

Thank you for the suggestion truckn! That would be a good comparison indeed. Cheers!

[@culturetrash3191]

I just picked up a gen 4 19 today and shot it alongside my p10c. The 19 does feel like a slightly softer shooter, but the p10c wins on every other metric. I also got brass to the head/face a couple times when shooting the 19 (I know everyone is going to tell me that it is bad form/grip, but I have never had that happen with any other handgun), which is kind of irritating.

[@KSGunGuy01]

I doubt the brass to the head was bad form. Glocks tend to have erratic ejections but they definitely clear the gun. Thank you and cheers!

[@culturetrash3191]

Any fixes you would recommend for that? Does it get better as the gun is broken in or is it just something you have to live with?

[@KSGunGuy01]

It should get more consistent but it will still be a little erratic. It’s the way the extractor is shaped and moves.

[@culturetrash3191]

Man that is a bummer! Oh well, I appreciate the help! I may just rotate between my M&P 2.0c 3.6" and the CZ p-10c for my non-summer CCW then...don't want brass flying in my face in a self-defense situation.

[@veevans01ify]

Luckily I live 30 min from Glock Inc. My Gen 5 19 had erratic case ejection. I Drove there and they fixed the issue. If it continues to be severe send it in to Glock Ice and they will fix it at no cost.